Multiple Entries on ipod

I imported a 4 disc CD to i tunes and then synced it to my ipod. When I go into albums on the ipod, there are multiple entries and not just the 4 cds.Every entry shows the same tracks, so in essence I have about 10 entries for each CD. Also, in another case when a single album was synced to the ipod, it appears 4 times on the ipod. Why this happening?

*HowTo: Grouping Tracks Into Albums*
Excuse the long post, but hopefully covering all the bases (that I can think of) will help you fix the other issues you are likely to run into as you try to organise your iTunes library.
*Use an album friendly view*
iTunes will let you sort music on many columns, some of which are unlikely to group albums together or put the tracks in their normal order. The most useful order for editing the library is probably *Album by Artist*. If you're not already there, select the list view and click on the column heading for Album until it reads Album by Artist.
*One cover, too many tracks*
The iPod (and iTunes to a lesser extent) conflates two or more albums with the same title, most obviously with *Greatest Hits*. On the iPod this can result in one album acting as a combination of two or more. Selecting any cover gives all the tracks of all albums with the same title. The workaround for this "Greatest Hits" bug is to give each album a unique title - I tend to go for *Album - Album Artist* as this reads clearly in the iTunes browser. Alternatively you could use the wording as it appears on the cover or append different numbers of spaces for each different album. Somewhat oddly, setting different values for Sort Album doesn't work.
*Missing Artist or Album not with others by same artist*
iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. In iTunes, however, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us however, would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the album artist and clear the compilation flag.
*One album, too many covers*
For true compilations, where each track is by a different artist, the answer is to set the compilation flag to true and enable the iTunes preference to *Group compilations when browsing*. If the album is not a compilation however, any tracks which list guest artists may be treated as separate items. Filling in the Album Artist field is enough to link things in iTunes. Sadly, however, the iPod ignores the Album Artist field when grouping albums so this is only a partial solution. You can simply mark the entire album as a compilation which seems to be the way iTMS handles it, however that's not an ideal fix. Short of waiting for Apple to address this issue (and as far as I can tell it goes back to the 1st gen. of iPods) we need a workaround. What I do is to put any additional artist info. in square brackets after the song name. E.g. *Track \[Feat. Guest\]* and then set *Artist=Album Artist* for each track. For anthologies where the Album Artist is credited as part of another group, e.g. for Cream tracks on an Eric Clapton anthology, I use *Track \[As Group\]*. For a track where the main Album Artist doesn't receive a credit, e.g. the first track of the Slim Shady LP credited to Jeff Bass, I just set the track name to *Track \[Guest\]* while still setting the artist to the album artist. N.b. I use square brackets to indicate that this is information about the track as distinct from the song title and also use this style for Mix/Live/Bonus info.
*One album, still too many covers*
iTunes may split albums into two or more sections if some tracks from the album have different values for Artist, Album Artist, Album, No. of Discs or Part of a Compilation. Tiny differences such as trailing spaces, accented characters or variants of symbols can sometimes be quite hard to spot. The iPod is also more sensitive to case variations and may split or reorder an album that looks okay in iTunes. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. When this happens I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
*Tried that, there are STILL too many covers!*
The Sort Artist, Sort Album & Sort Album Artist fields can be used to override the normal sort order. For example iTunes automatically drops leading articles (a/an/the) so "The Beatles" are arranged under "B" instead of "T". Occasionally different tracks from the same album can have different values in these sort fields which can also break up the grouping. Making the sort columns visible in iTunes can help with spotting & correcting such problems.
*One cover for multi-disc album*
Multi-disc albums are often listed as *Album (CD1)* for CD 1, *Album (CD2)* for CD 2 etc. To display these properly using just one cover, each disc should have the correct *Disc X of Y* values set, and then the entire album should be given the single title Album. Being somewhat obsessive I also renumber the tracks sequentially, working backwards from the last track (so that no two tracks ever have the same number) until I reach disc 1. BTW You can still give the individual discs different artwork should it be relevant so that the correct artwork will be displayed as the album progresses.
*Tracks out of sequence*
Check that all tracks have the same/correct disc no. For a single disc album this should be either blank (my preference) or 1 of 1. iTunes will sort tracks with a disc no. of 1 before those that are blank. Just for fun the iPod sorts them the other way around. Consistency is the key. In addition ensure that the Sort Artist, Sort Album Artist & Sort Album fields are the same across all tracks.
*One artist, many names*
With some artists, particularly classical composers, you should be aware of alternative representations of their names. E.g. 2Pac vs. Tupac. The menus will work best if for each artist you standardise on just one form of their name. E.g. make a choice between Mozart, W.A. Mozart or Wolfgang Amadeus Mozart, and then apply it consistently. For classical music I tend also to use the Composer as the Artist & Album Artist and either discard the performer details or place these into the Comments field. The Sort Artist/Sort Album Artist fields can group alternate forms in iTunes but these will break up again on the iPod. It is best therefore to use Artist & Album Artist consistently so the name is shown the way that you want and Sort Artist & Sort Album Artist to control where it is displayed.
tt2

Similar Messages

  • Multiple entries of same artist and song on my ipod

    hi. I'm new to ipod an can't say i'm enjoying this very "controlled" experiance.
    Can someone please tell me why I have multiple entries on my pod? The same artists somtimes with the same songs othertimes not. It's a **** mess. It's also downloaded the artwork in 3's as well and split up my albums. All the id tags are right too. 4 days an ipod owner and already I'm regretting it. Mind you I was warned all my pals told me to stay well away.
    thanks for all help.
    swizz

    Most likely issue is that they really are different. Sometimes there is an extra space or different Capitalization. You can't see extra spaces if they are at the end but iTunes does.

  • Multiple Entries of Same Artist in IPOD

    I am getting multiple entries of the same artist on my IPOD even though I checked the spelling and spacing very carefully and they're all identical. Example: I have 3 Bruce Springsteen lines with his songs/albums scattered across the 3 entries versus having everything in one place. How do I rectify?

    Most likely issue is that they really are different. Sometimes there is an extra space or different Capitalization. You can't see extra spaces if they are at the end but iTunes does.

  • Publishing multiples entries

    Hello,
    My problem is that i'd like when i post through PodcastCapture to generate multiple entries so each formats will have an entry in iTunes ? I thought at first that duplicating the groupblog task will be enough, but in fact it seems necessary to modify also pcastaction, and as i'm not an IT it seems impossible for me...? Anyway could someone confirm me this ? If it is not this way could someone explain how to do this ?
    Thanks in advance, regards
    Julien

    Hi,
    Here's my plan for next week to reach this goal:
    - Duplicate pcastaction and duplicate class groupblog (i'll test without because i guess a function is made to be be reusable...), so if i got mess i have a backup
    - Duplicate in the workflow the task "groupblog" as many times i need it numbered or named to be distinct and modifying parameters.
    - Duplicate groupblog.html.erb in 3 gb_iphone/ipod/audio.html.erb (for example)
    - In the workflow i'll call the duplicated gb.html.erb and pcastaction
    - And the most important i'll cross my fingers..!
    It seems complicated to have to make all those modifications for a simple goal, so if anyone as already experienced this..i'll come back to post the result.

  • Multiple entries in Calendar

    Is anyone else having this problem?
    My contacts are fine, but I noticed multiple entries in my Calendar on my Touch iPod. In the past, I've seen multiple entries with iCal (I think it came from being synced with my blackberry and/or .mac - but it seems to be working fine for the past month or so), but iCal looks fine.
    It's really bizarre, because it almost looks like the further you go back in time, the more duplications for an event (reoccurring) are found. If you try and Delete an occurrence on the iPod, it only allows you to delete from that point forward - but ones from the previous year/month are still there. The starting date for an occurence on the iPod is always on the day you are checking, so it's not like it's set to the first time you entered it or something so you can't go back to the first instance.
    ALSO.
    I noticed that some all day events span over to the following day on the iPod, but are fine in iCal.

    You know - now that you mentioned it - I did see a WHOLE lotta dos - but didn't think anything of it.
    I've since restored the thing and elected to not sync the calendar.
    One thing that did get fixed - was mix-matched album artwork... podcasts, music, even videos were all getting their album artwork messed up - 1.1.2 seems to have fixed that... mind you... I've had to do a factory restore so many times because of this bloody calendar thing; perhaps I should give it more time before I declare that part is ok.

  • Our family has multiple products from IPods, IPads, IMac, and Apple TV. However, we made a mistake when registering them so that we seem to have at least two different ITunes accounts. How do I combine them or reset the accounts to make them one?

    Over the years we have purchased multiple products from IPods, IPads, to IMacs. Unfortunately, along the way, we accidentally created more than one ITunes accounts so that we can only access some songs etc on certain devices and not on others. How do we reset our devices to create one account or transfer our music to one account?

    You don't. You cannot combine iTunes accounts at this time. Pick the one that you want to use and stick to that one account for all the purchases.
    Before making any changes read this article - http://support.apple.com/kb/ht4627
    MJ

  • Data in the cube is showing multiple entries when compared with ODS

    Hello BW Gurus,
    We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
    An Example:
    Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
    There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
    Here is the ODS Code:
    tables: /BI0/PPRODORDER.
    loop at data_package.
    select single COORD_TYPE
    PRODVERS
    into (/BI0/PPRODORDER-COORD_TYPE,
    /BI0/PPRODORDER-PRODVERS)
    from /BI0/PPRODORDER
    where PRODORDER = data_package-PRODORDER
    and OBJVERS = 'A'.
    if sy-subrc = 0.
    if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
    or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
    data_package-PRODVERS = space.
    else.
    data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
    endif.
    endif.
    if data_package-calday = space
    or data_package-calday = '00000000'.
    if data_package-TGTCONSQTY NE 0.
    data_package-calday = data_package-ACTRELDATE.
    endif.
    endif.
    modify data_package.
    endloop.
    Here is Cube Code:
    tables: /BI0/PPRODORDER,
    /BIC/ODS.
    TYPES:
    BEGIN OF ys_mat_unit,
    material TYPE /bi0/oimaterial,
    mat_unit TYPE /bi0/oimat_unit,
    numerator TYPE /bi0/oinumerator,
    denomintr TYPE /bi0/oidenomintr,
    END OF ys_mat_unit.
    DATA:
    l_s_mat_unit TYPE ys_mat_unit,
    e_factor type p decimals 5.
    loop at data_package.
    select single COORD_TYPE
    PRODVERS
    into (/BI0/PPRODORDER-COORD_TYPE,
    /BI0/PPRODORDER-PRODVERS)
    from /BI0/PPRODORDER
    where PRODORDER = data_package-PRODORDER
    and OBJVERS = 'A'.
    if sy-subrc = 0.
    if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
    or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
    data_package-PRODVERS = space.
    else.
    data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
    endif.
    endif.
    if data_package-calday = space
    or data_package-calday = '00000000'.
    if data_package-TGTCONSQTY NE 0.
    data_package-calday = data_package-ACTRELDATE.
    endif.
    endif.
    data_package-agsu = 'GSU'.
    data_package-agsu_qty = 0.
    select single gr_qty
    base_uom
    into (/BIC/ODS-gr_qty,
    /BIC/ODS-base_uom)
    from /BIC/ODS
    where prodorder = data_package-prodorder
    and material = data_package-material.
    if sy-subrc = 0.
    if /BIC/ODS-base_uom = 'GSU'.
    data_package-agsu_qty = /BIC/ODS-gr_qty.
    else.
    SELECT SINGLE * FROM /bi0/pmat_unit
    INTO CORRESPONDING FIELDS OF l_s_mat_unit
    WHERE material = data_package-material
    AND mat_unit = 'GSU'
    AND objvers = 'A'.
    IF sy-subrc = 0.
    IF l_s_mat_unit-denomintr <> 0.
    e_factor = l_s_mat_unit-denomintr /
    l_s_mat_unit-numerator.
    multiply /BIC/ODS-gr_qty by e_factor.
    data_package-agsu_qty = /BIC/ODS-gr_qty.
    ENDIF.
    else.
    CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
    EXPORTING
    INPUT = /BIC/ODS-gr_qty
    NO_TYPE_CHECK = 'X'
    ROUND_SIGN = ' '
    UNIT_IN = /BIC/ODS-base_uom
    UNIT_OUT = 'GSU'
    IMPORTING
    OUTPUT = DATA_PACKAGE-gsu_qty
    EXCEPTIONS
    CONVERSION_NOT_FOUND = 1
    DIVISION_BY_ZERO = 2
    INPUT_INVALID = 3
    OUTPUT_INVALID = 4
    OVERFLOW = 5
    TYPE_INVALID = 6
    UNITS_MISSING = 7
    UNIT_IN_NOT_FOUND = 8
    UNIT_OUT_NOT_FOUND = 9
    OTHERS = 10.
    endif.
    endif.
    endif.
    modify data_package.
    endloop.
    some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
    your suggestion and solutions would be highly appreciated.
    thanks,
    Swathi.

    Hi Swathi
    In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
    If you are running daily full load on the cube then please delete the earlier requests.
    So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
    Regards,
    Monika

  • Can I combine multiple entries into a single statement?

    I am relatively new to Live Cycle so forgive my lack of technical wording.
    I would like to use multiple entry fields to fill in a statement.
    For example:
    I'd like the user to see this:
    Target Dropdown     Endo Dropdown     Type Dropdown     Version # Entry     Date 1 Entry     Date 2 Entry
    and then have the form merge all that together into a line that looks like this:
    RS_(target)_(endo)_(type)\(version)_(date)_(date)
    Preferably without repeating information on the page as we'll have multiple of these entries and the page will get hectic quick.
    Is this possible?
    I first had each dropdown in individual table fields, but due to regulations we follow the entries need to be merged without spaces.
    I always have a backup if this can't be done, but any help is appreciated.

    Not sure where you're sending it, but if you have a global variable named "bob".
    bob.value = "RS_"+target.rawValue+"_"+endo.rawValue+"_"+type.rawValue+"\"+version.rawValue+"_"+date.r awValue+"_"+date2.rawValue;
    Something like that should work.

  • HT4528 Calendar under IOS7.0.2 has been changed. does not work the same. what happened to LIST mode (multiple entries being displayed in list format) or am i doing something wrong?

    I got use to using Calendar app where multiple entries are stacked under IOS6.  Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done.  Am I doing something incorrect HELP!

    The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x.  You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).

  • Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

    Hi Experts,
    Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
    In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
    I have written a PCR as
    OUTTPORIGS Origin status
        COLOP*     TIP  >TOP curr.TType
      P
        HRS=PBEG   Set
        ADDDB90T3  Add to day balance
        HRS=PEND   Set
        ADDDB90T4  Add to day balance
    But its giving me value of 2002 start time  as (1014=24) & END time (1416=30) respectively.
    Since TIP will have entries with origin E & A as well with P  and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
    Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
    You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
    Regards
    S S
    Hi All,
    Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
    Regards
    Sunita
    Edited by: Sunita on Feb 5, 2011 10:02 AM

    If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
    http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
    To read about what ranking functions does and how will they help you use this link..
    http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
    Please mark as answer, if this has helped you solve the issue.
    Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

  • Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

    Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
    the incorrect entry? Adobe installed a very quick update today.

    They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
    You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
    * Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
    * Shockwave Flash 10.1 r53
    * Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    #Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Shockwave Flash'''
    #*Use Firefox to Download and SAVE to your hard drive from the link in article below
    #*SAVE to your Desktop so you can find it
    #*After download completes, close Firefox
    #*Click on the file you just downloaded and install
    #**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
    #**Note: Most browsers other than IE will also get updated with this one download
    #**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    #*After installation, restart Firefox and check your version again.
    #*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
    #* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
    #* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

  • Multiple entries of the same topic in calendar

    Hi, i am having trouble with my calendar, as in it displays multiple entries of 1 entry on the same day! eg. if i have one entry then it displays that same entry about 15-20 times on that same day in a list!!! can anyone help with this fault?

    I'm having same problem but where there are duplicate calendar entries, one of the entries cannot be changed (doesn't have edit button)and the other entry can be changed. Needed to reschedule a doctor's appointment and wasn't able to delete b/c there isn't an edit button. So it stays there. Don't know which date is the new rescheduled date. I have iPhone 3g. Since iPhone4 my 3g is extremely slow too.

  • To delete multiple entries in table control in module pool

    Hi,
    Please help me out to know , <b>how to delete multiple entries from table control</b> when multiple lines in table control are selected.
    Regards,
    Irfan Hussain

    hai,
        you can do it inthis way.
    in the PAI event.
    loop at <table control name>
      module del_itab.
    endloop.
    in the nodule,write the folowing code.
    if <tablecontrol>-fieldname = 'X'.
    delete <tablecontrol-itab>
    endif.
    cheers

  • How to rid of multiple entries in ical

    How the blazes do you you get rid of MULTIPLE entries in ical? I have read many answers and printed off a few to follow them but invariably i get to a point where I am unable to take the next step! I back track and and unable to find a fault of where I went wrong!! Then I have to ask myself WHY? Why on earth am I having to go to such extreme lengths to get rid of the unwanted entries?
    Come on now Apple it is you who should be providing the simple logic answer to this?
    I decided to give up? just ignore the other entries it easier than going frantic trying (and anyway I am frightened I may throw the macbook in my temper)
    bye bye
    bob

    Hi pvonk
    I do know how to delete the odd file but I have things like bank holidays entered 7 or 8 times and Trooping the colour 15 entres Queens jubilee 14 times.
    I just want to stop the thing from doing that and if there is a way my question is why do I have to do it? surely apple should fix it or whatever
    peardrop

  • Multiple entries in ical

    I can't understand why this has happened - i went back to my entries for last year to check on a birthday that hadn't shown up for this year and i had multiple entries for each event e.g an appointment would be listed 20 times - for that date.
    Does anybody know what the problem is?

    Probably because of iCloud since I assume you started it up on both Macbook and a mobile device.

Maybe you are looking for

  • Serviço de suporte no Brasil

    Adquiri um IPAD mini na Claro que, após três dias apresentou um erro de inadequação do chip "Sim card não encontrado". A princípio, pensei que fosse um problema a ser resolvido pela Claro. No entanto, a Claro, especialmente para esse tipo de aparelho

  • How have people fixed cd burning prob in itunes 8.2?

    Hi there Ive read all the posts about CD burning in itunes 8.1 and 8.2. CD's wont burn and itunes just hangs until I force quit. Anyone ayone suggestions? Is there another way to burn a CD with itunes music, like a software download. Tracy

  • Can I have Email Recipients of a PDF Form Complete via Smart Phone Email?

    Hello Adobe PDF Forum,   Is it possible to have email recipients of my PDF form complete via their smart phone email platform?  If so, could you step me through the 'how to' process in making this possible for my recipients? Thank you!  Have a great

  • How to replace a word on richtextbox

    hi how can i replace a word in one richtext box by code? like i have the richtexbox with the word TEST and i wanna to replace that word (TEST) by DONE for example

  • Backup details

    Hi all, Greetings of the day. Needed some suggestion and inputs on the below task 1. Need to create a separate database for storing the backup information of 10 databases which are in different servers.!!! How do i do this? thanks, baskar.l