Multiple episodes not being saved
We picked up an X1 and companion cable box a few weeks ago. I scheduled several shows that had just started in the summer. Most of them from episode 1x01 but a few I missed the first episode. I should have three weeks of all of those shows. However even for the shows I've not watched yet I only have one episode recorded. There is at least one show where I have episode 1x01 which was partially watched and episode 1x03 recorded. For all of these series I have confirmed the X1 is setup to record as this:New episodes onlyChannel onlyUntil Space is neededAll episodeson time and on time.I'm at 18% full with 13 recordings. I also reboot the device because I saw a posting that maybe the old shows just weren't showing up. No joy. Any ideas?
vanstrien wrote:
We picked up an X1 and companion cable box a few weeks ago. I scheduled several shows that had just started in the summer. Most of them from episode 1x01 but a few I missed the first episode. I should have three weeks of all of those shows. However even for the shows I've not watched yet I only have one episode recorded. There is at least one show where I have episode 1x01 which was partially watched and episode 1x03 recorded. For all of these series I have confirmed the X1 is setup to record as this:New episodes onlyChannel onlyUntil Space is neededAll episodeson time and on time.I'm at 18% full with 13 recordings. I also reboot the device because I saw a posting that maybe the old shows just weren't showing up. No joy. Any ideas?Change the above to New & Old that will get you ALL Episodes, regardles of them being new or repeats if that is your intent!
Similar Messages
-
Messages are not being saved on N96
On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.
I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.
-
I've been editing images with ease for a long time but now the changes are not being saved.
I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
HT4075 I tried the steps mentioned above but the changes are not being saved.
I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?
The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand. -
I appologize if this is the wrong forum, but I did a search and failed to find a related subject.
When I click on File>Options then modify them the way I want to, then close Designer 2008 and reopen it, they're back to the default values.
How can I retain my options even after closing designer and reopenning?
Thanks much!What version of Crystal are you using?
Are you a local PC Administrator also?
Try right clicking on the crw32.exe and selecting Run As Administrator and then change them.
Are you clicking the OK or Save button after making changes or simply closing the window using top right X button?
Those options are saved to the registry, only reason they are not being saved is you don't have permission or some anti-virus software or Restore Point is writing the original settings back when you close CR.
You may want to check with your IT people to see if they have pushed out some sort our Profile update that doesn't allow you to keep changes to the registry.
After making the changes and you create a new report do you see the changes? Don't close the designer.
Thank you
Don
Edited by: Don Williams on Apr 6, 2011 12:52 PM -
Table extension not being saved
Hi,
I have implemented Table extension at item level for SC and from the config perspective all looks fine.
1) Created Append struture with required fields
First step: appending the field to the correct structure in SE11 or via transaction SPRO.
Structure names for table extensions are according to the pattern:
INCL_EEW_PD_<x>_CST_<y> with
<x>: HEADER, ITEM
2)
Path in IMG (transaction SPRO):
SAP SRM -> SRM server ->
-> Cross-Application Basic Settings
-> Extensions and Field Control (Personalization)
-> Create Table Extensions and Supply with Data
-> Define Customer Table Extensions on Item Level
Second step: you additionally need to append the new table extension field to the
corresponding INCL_EEW_PD_<x>_CST structure called u2018cross-documentu2019 structure. This can
also be done in IMG
You can explicitly enter the very same field(s) (name and type) into both append structures.
It is recommended, however, to first create another structure with the new field (in SE11) and
then include that other structure in both append structures
(menu path in SE11 screen: -> Edit -> Include -> Insert).
Default append structure names in this example are
ZAINCL_EEW_PD_ITEM_CST_SC and
ZAINCL_EEW_PD_ITEM_CST
when using the IMG path..
3)
Third step: Set visibility of the table extension.Create an entry with TICUS for item data (THCUS for header data).
Donu2019t miss to populate the Transaction Type field - you could save the table entry without it,
but it will not work!
4)
Fourth step: Configure Control of Fields of Table Extensions. Create an entry with TICUS for item data (THCUS for header data).Donu2019t miss to populate the Set Level field - you could save the table entry without it, but it will not work!
Fifth step: Configure Control of Actions
Sixth (final) step: SM30 - maintain view /SAPSRM/V_MDFSBC_DEFAULT
I have rechecked the config several times but could not find any reason for the data not to be saved.
When I add the data to the table structure and if click enter or check button the data disappears. The entries are not captured in BBP_PDICF table either. i can see the Z structure in se11 for BBP_PDICF.
I have checked doc_change badi for any issues but could not find the issue. Any idea as where I should check for the data not being saved issue?Hello Srinivas,
Please do this step:
In SM30-maintain view /SAPSRM/V_MDFSBC_DEFAULT
Object set type :TICUS
Structure field name : custom field
Object type : BUS2121
set level : item
Field visible : X
field enable : X
Regards,
Neelima -
Window preferences not being saved
Hi there -
Using InDesign CS4 on Windows XP. A few days ago a problem started happening - whenever I close InDesign, my preferences for which windows (Tools, Pages, Links, Character) I have open are not being saved. Takes me 3-4 minutes every time i open InDesign to put everything back the way it should be.
I've installed updates, no dice, and have deleted the preferences file as suggested by this thread:http://forums.adobe.com/thread/526990
Any other steps I can take?
thanks in advance,
AndrewThose things are saved as part of the workspace. It sounds as if the current workspace file has become corrupt. Close ID, then go to your user profile and you'll find the workspaces folder under \Application Data\Adobe\InDesign\Version 6.0\<language>\Workspaces. Delete the "current" xml file for the workspace and restart ID. The workspace will be restored to the conditions set when it was saved, but hopefully will remember changes again when you close the program.
-
Recently upgraded to an iPhone 3G S from the first generation iPhone. Synced my phone and everything is fine, but when I use the Notes application the notes are not being saved. Anyone know of a way to fix this?
Ensure that the "sync notes" box is checked in iTunes. Also note that the notes syncing feature doesn't work very well yet.
If you have a note on both the phone and the computer, and you change/update the one on the phone, the next time you sync the computer version will over write the phone version.
coop -
I moved my Dreamweaver 8 to a Win 7 machine and after installing the 8.02 update the FTP settings, user and password, are not being saved. I tried the regedit alterations with no joy. Any thing new for Win 7?
KirkHi N6SXR,
As you correctly guessed, Nancy is our expert contributor on Adobe forums and not an Adobe employee. We are glad that you managed to sort your issue. Thank you for sharing the information with other users that will potentially benefit from your post.
The versions supported by Adobe can be found at http://www.adobe.com/support/programs/policies/supported.html. While it is not our intention to force users to upgrade their software, it is also true that there has been a sea change in the way people design web pages. The team has been relentlessly focused on creating a software that meets the current demands of web designers through periodic updates that provide users with bug fixes and new features.
The Dreamweaver standalone product is available for 30$ monthly subscription. Do have a look at the offers available http://www.adobe.com/ca/products/dreamweaver/buying-guide.html when you have the time.
Thanks,
Preran -
Beginning today my new bookmarks are not being saved. I read several KB articles and have tried:
- making sure the bookmarks file is not read-only
- reset browser.places in about:config
- renamed the places.sqlite and places.sqlite-journal, and restarted Firefox.
None of that worked.
Is there another fix to try?vineel
>>let us know briefly what kind of problem you are facing
Bookmarks are not being saved.
I still have my existing bookmarks.
All existing bookmarks work.
But when I click on "bookmark this page", it never gets added.
There's really nothing to take a screenshot of, other than my old bookmarks. -
Settings are not being saved when i reboot
i am having a problem when i restart my computer my settings such as dock settings background settings are not being saved how do i resolve this problem?
Welcome to the Apple Discussions!
Is this just for new settings that won't stick? Or have all your original settings reverted to the defaults? Have you started up from your Mac OS X install disk and used the Disk Utility to "repair disk"? Do you have a backup of your important files?
-Doug -
Flash CC crashes after publishing iOS app + publish settings are not being saved to file
I have two issues:
1. Flash CC crashes every time I publish an iOS app
2. My Publish Settings are not being saved
1. Flash CC crashes every time I publish an iOS app
Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
2. My Publish Settings are not being saved
Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
Thanks!reset your preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html -
Mouse settings are not being saved
I just did a clean install of Lion (10.7.5) on a new SSD in a mac pro 1,1 and am having problems with my mouse settings. The settings are not being saved. When I change any of the buttons, nothing changes.
It's not a hardware problem with the mouse. If I boot up to my previous os drive, lion 10.7.5, the mouse settings are correct and function properly.FOrgot to add, this is the basic wired mouse. I've also tried the wireless bluetooth mighty mouse as well with the exact same results.
I've tried removing the plist files with no success -
Sent or replied to emails are not being saved in mailbox
My sent emails or the replies to emails sent to me are not being saved in my mailbox. The "sent" box is empty. What is happening and where can I find a copy of the emails I sent and the replies I sent?
Thanks.I am not sure why it's not enabled by default, but when you go in to your mail and you can see your inbox. look below your folders on the left hand side you'll see mail settings under general.
click it
and you'll see an option to save your sent messages. -
My outgoing messages are not being saved in my sent folder
Half of my message that I try to send are not being saved in my sent folder. This is a huge problem causing lost documentation and copies of information and conversations I have had. The error message I get says that thunderbird was unable to save to my sent folder and asks if I would like to try again. If I say yes I get the same message over and over again until I give up and let the message be lost to cyberspace. What can I do to fix this issue and stop loosing valuable information for work?
I am using an HP laptop running windows 8.What protocol is your email account using (POP or IMAP)?
If POP, you need to make sure your local disk space is enough to save the sent messages. Check where the copies are located by looking at the account settings under '''Copies & Folders'''. When using POP, I believe a copy needs to be saved on both sides: local and server.
If IMAP, the email server is where such copies are saved. You can also double-check such settings as mentioned above.
Finally, if your emails are too big, this may be a restriction of your email provider, perhaps get in touch with their support and inquire about this to rule it out as the cause of the problem. Could you share more details about the kind of emails that fail to have a local copy saved or is it for each and every email?
Maybe you are looking for
-
my computer upgraded from 3.6 to 5 and crashed and will not now open any pages with firefox. I have tried to reinstall many times with same result. What is the problem? I do not beleive I am alone in this. I had not idea that the upgrade occured on t
-
HI, can you explain me "how to use the xsl if function" ? My source is an ORDRSP Idoc and i want to use the following. IF E1EDP20 is existing then .... and IF E1EDP20/WMENG = 0 then ... anyway... is there an option to test the xslt mapping with XML s
-
Is it possible to curve text into an arc, similar to using MS wordArt? Thanks!
Hello - can anyone tell me if it is possible to curve words/text into an arc in Pages, similar to doing it in MS WordArt? I'd like to curve words around an image, sort of like creating a logo. Any ideas are appreciated.
-
JTextField/JTable-cell Button
Is there any known efficient methods of creating the JTextField or JTable-cell Button as like in Forte's Component Inspector window where you click on the property value field and the value is displayed just left of a small button labelled "..." ie:
-
EXP-00056: ORACLE error 1455 encountered
when trying to export full database gives this error . exporting synonyms . exporting views . exporting referential integrity constraints . exporting stored procedures . exporting operators . exporting indextypes . exporting bitmap, functional and ex