Multiple errors with SuperDrive
I've had my G5 since late 2006 and didn't do any major change to it or to the SuperDrive (DVR-110D) since. But in the last few months, the burner has been somewhat erratic, giving me error messages and trashing DVDs. I'm still able to burn most of the discs, though.
I've updated from Toast 6 to Toast 9 and added 4 GB of RAM, but the problem is still there. The drive will stop a few times during the burn and, most of the time, will continue to burn, but sometimes it won't. I've tried burning at 12X and 8X but no change. Since the beginning (and even with my G4), I always used Sony DVD+R and never had major trouble with them.
Some messages I get: BUFFER UNDERRUN, POSITIONING ERROR DETECTED BY READ OF MEDIUM, WRITE ERROR, INTERNAL TARGET FAILURE and the latest INVALID FIELD IN CDB, SESSION FIXATION ERROR - INCOMPLETE TRACK IN SESSION.
My questions are:
-Should I update the firmware of the drive to correct the problem?
-If the drive is dying, can I simply swap it for the latest DVR-118 and MacOS X will still see it as an "original SuperDrive" ?
-Should I consider an external FireWire LaCie burner?
Thanks!
Hi-
Since the beginning (and even with my G4), I always used Sony DVD+R and never had major trouble with them.
Makers outsource.
Media batches change.
Using a different disc (Verbatim or Taiyo Yuden) is worth a try.
BUFFER UNDERRUN
Can be caused by too many processes running during burn, corrupt files or inadequate hard drive space.
WRITE ERROR
Most commonly a media error.
INTERNAL TARGET FAILURE
Hard drive space inadequate, corrupt or improperly prepared files.
-Should I update the firmware of the drive to correct the problem?
You have multiple errors, possibly multiple problems.
You could try an update, which should help with media errors.
-If the drive is dying, can I simply swap it for the latest DVR-118 and MacOS X will still see it as an "original SuperDrive" ?
In OS X 10.5x, plug and play.
In OS X 10.4x, plug and play with Patchburn.
-Should I consider an external FireWire LaCie burner?
No.
This would complicate matters and should not be necessary.
I would work on clearing drive space, repairing hard drive directories, burning after restarts, trying a different media, and a firmware update.
If after this conditions aren't improved, you will have at least prepared the system for proper use of a new drive; i.e. hard drive free space and hard drive health are key to successful burning.
Similar Messages
-
My mackbook pro 13' A1278, has had multiple errors with the hard disk.
My mackbook pro 13' A1278, has had multiple errors with the hard disk. Now does not recognize the internal hard disk, but connect this HD using usb conector works fine.
So it's a hardware problem.
I'm really disappointePipfromvic,
have you tried installing Mavericks onto an external disk, and booting from the external disk using Startup Manager? If it runs well from an external disk, but continually crashes when running from the internal disk even after clean reïnstallations, then that could point to a faulty internal SATA cable as the culprit. -
DVD media / capacity errors with SuperDrive
I'm having various media errors when I am attempting to burn a DVD using Disk Utility. I've tried DVD-R (Fuji) and then DVD+RDL (Memorex). The sixe is 4.2GB so both should have the capacity. I get error messages that the disk does not have the capacity, but these are brand new blank DVD's. Another message said something to the effect that it could not read the disk. Any ideas about troubleshooting these problems?
Hi-
Since the beginning (and even with my G4), I always used Sony DVD+R and never had major trouble with them.
Makers outsource.
Media batches change.
Using a different disc (Verbatim or Taiyo Yuden) is worth a try.
BUFFER UNDERRUN
Can be caused by too many processes running during burn, corrupt files or inadequate hard drive space.
WRITE ERROR
Most commonly a media error.
INTERNAL TARGET FAILURE
Hard drive space inadequate, corrupt or improperly prepared files.
-Should I update the firmware of the drive to correct the problem?
You have multiple errors, possibly multiple problems.
You could try an update, which should help with media errors.
-If the drive is dying, can I simply swap it for the latest DVR-118 and MacOS X will still see it as an "original SuperDrive" ?
In OS X 10.5x, plug and play.
In OS X 10.4x, plug and play with Patchburn.
-Should I consider an external FireWire LaCie burner?
No.
This would complicate matters and should not be necessary.
I would work on clearing drive space, repairing hard drive directories, burning after restarts, trying a different media, and a firmware update.
If after this conditions aren't improved, you will have at least prepared the system for proper use of a new drive; i.e. hard drive free space and hard drive health are key to successful burning. -
Multiple Errors with New iTunes
Hi Folks,
What's up with the most recent version of iTunes.
1. I'm trying to burn a CD (playlist) and iTunes is trying to analyze or "Determining the Audio Volume" for my podcasts. It also says 225 and I don't have that many.
2. Print a cover for my CD. It freezes when I want to change the print features. Will not print, can't close window, etc. I have to re-start my system.
3. My previous posting is for a missing iTunes Help -- nothing there.
4. If I'm burning a disc with iTunes I can't open an IE or Firefox Browser. It complete jams my computer.
What's up with this recent version.
Do I need to complete uninstall again. May be I should just go back to an older version since the newer versions have too many bugs or problems.
Thanks, katyI should add that as of this morning iTunes appears to opening fine and reading my iPod (which is inexplicable because I haven't done anything with it since my 1st post.) iTunes still, however, will not save my library. I keep getting error message {-1450}. Also, every time i open iTunes, I am asked to agree to the user agreement, as if i had just downloaded the program.
-
Multiple errors with DSC modules modbus master and slave
Hi,
I've searched quite a lot of posts but haven't found solution for my problem. I'm playing with LabVIEW DSC module and it's modbus master and slave functionalities. Even the LabVIEWs own modbus examples (Modbus Simulator and Fundamentals) seem to work randomly or not at all: When checking the Variable Manager utility Modbus Simulator (i.e. modbus slave/server) seems to deploy variables correctly with good quality but Modbus Fundamentals (i.e. modbus master/client) most often shows unknown value or bad quality for all the variables. When running the VIs I get 'Error -1950679035 Unable to locate variable in the Shared Variable Engine' and sometimes some other errors too. If the Modbus Simulator (slave/server) is expected to work fine I guess I should get two slaves communicating, but this isn't happening either. So maybe Modbus Simulator example isn't working either.
I've tried undeploying and deploying the libraries, stopping and starting the SVE, booting PC, reinstalling DSC module, and setting firewall and antivirus software off. This problem is going on with two different computers, both of which have recently installed LabVIEW 2011, first PC with Win XP and second PC with Win 7. No other OPC servers should be installed to these computers. And what is really interesting, the problem seems to have nothing to do with my network since Simulator and Fundamentals examples are not working even if the network cable is unplugged!
Any suggestions? Replies are highly appreciated!V8 has the same feature, but the words are different.
The Generator typically uses the Driver time base, and the Gl. Var Write is writing once per block.
So, to see all values, you must have a block size of one.
I set up the Driver timebase to 10 Hz, block size of 1. The Generator and the Read Variable default to the Driver timebase.
The Generator is making a 2 Hz Rectangle waveform. YOu can see that it's shifted, but otherwise intact.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab. -
Hi
Hi bought a 5800 XpressMusic RM-356 (software V 30.0.011 from 29/6/09 personalizada 30.0.011.C01.01 from 26/6/09) 9 months ago and the Nokia repair center replaced it 3 times but the problems carry on.
0-It hangs when I switch it on. The I need to unplug the mSD8Gb to work. VERY ANNOYING.
1-Sometimes the screen goes black and reboot. Sometimes ask me about time and date and sometimes don't.
2-Sometimes when I switch on the screen goes black and the quick access button works ok. I need to switch off and switch on again.
3-Sometimes hangs charging battery.
4-Sometimes hangs only tipping the camera button.
5-Sometimes hangs after receive a call.
6-Sometimes hangs after a calendar alarm.
7-Once the alarm sounded 46 mins latter!!
8-Multiple time an application (especially web browser) dissapear from screen (crash).
9-This happen in the three mobiles I had: the radio stops sound for 5 seconds (more or less) ever minute (more or less).
10-Sometimes the editor clear the text I typed. Very annoying.
11-This ussually happens in the three: Backup every day does not work!!
12-Sometimes the mSD8Gb filesystem brokes (I think when it hangs and I need to put off the battery) and then I lost data.
13-When I install some free applications from Ovi the mobile starts to don't work, so I decide to do not install any application but this solution have no sense.
What happen with this model? Is a bluff from Nokia?Mine 5800 works perfectly, and a lot better than my n97.
I have installed the latest fw v40, done a soft reset and formating the memcard before using it.
Are v30 the recent one for your productcode? If youre not sure - check here: http://europe.nokia.com/support/download-software/device-software-update/can-i-update
Updates contains bugfixes and improvements - and the phone often gets a lot better. A least I think 5800 did. -
Error in multiple operation with change document object for custom table
hi all,
I have developed a change document object for a custom table ZTEST and developed a report program for insertion, updation & deletion..everything works fine if I do only once ie. if I created only 1 entries. If I created 2 new entries , I am getting an Error "DUPREC:POS&Z3RL_TAB&Z3RL_TAB" and EXIT the transaction.
why I am getting this error??? is it not possible to do multiple operation with the change document???
kindly help.
Edited by: JaiKarthik on Apr 7, 2010 6:20 AMLOOP AT ts_mod INTO wa_mod.
READ TABLE <i_itab> INTO <wa_tab> INDEX wa_mod-row.
* Select the existing entries in table Z3RL for change history
SELECT SINGLE * FROM z3rl
INTO wa_z3rl
WHERE vkorg = <wa_tab>+3(4)
AND zzkunnr = <wa_tab>+7(10).
* Move the old entries
IF sy-subrc = 0.
CLEAR ls_z3rl.
ls_z3rl = wa_z3rl.
ENDIF.
* Update the table
MODIFY (viewname) FROM <wa_tab>.
CLEAR wa_z3rl.
wa_z3rl-mandt = <wa_tab>+0(3).
wa_z3rl-vkorg = <wa_tab>+3(4).
wa_z3rl-zzkunnr = <wa_tab>+7(10).
* Populate change tables
CLEAR wa_change.
wa_change-teilobjid = 'Z3RL'.
wa_change-textart = 'TEST_2'.
wa_change-textspr = 'EN'.
wa_change-updkz = 'U'.
APPEND wa_change TO ts_change.
*call the fM to log the values in CDHDR table.
CALL FUNCTION 'Z3RL_WRITE_DOCUMENT'
EXPORTING
objectid = 'Z3RL'
tcode = sy-tcode
utime = sy-uzeit
udate = sy-datum
username = sy-uname
planned_change_number = ' '
object_change_indicator = 'U'
planned_or_real_changes = 'U'
no_change_pointers = 'U'
upd_icdtxt_z3rl= 'U'
n_z3rl= wa_z3rl
o_z3rl = ls_z3rl
upd_z3rl= 'U'
lv_opt = ' '
TABLES
icdtxt_z3rl= ts_change.
CLEAR : wa_mod, <wa_tab>.
ENDLOOP.
Edited by: JaiKarthik on Apr 7, 2010 6:49 AM -
Multiple Error Messages, starting With 500 null Error
I've been experiencing multiple error messages with
ColdFusion 7.0 on Ubuntu Linux/Apache2 for the past several days,
starting with the 500 null error (see
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=f9e312a2),
which ocurred on only part of the site (a set of forms requiring
remote login). Now, the following errors are appearing on various
CF forms: "An I/O error while manipulating the sort index" and "An
exception occurred when setting up mail server parameters" and
finally, "No space left on device." All these errors are occurring
on add/edit forms and cffile upload forms that were working fine a
few hours ago and that haven't been changed.
Right now, I'm replacing the license.properties file to deal
with the 500 null error. My question is, has anyone else
experienced this smattering of other error messages in conjunction
with the 500 null error? Or fast on the heels of it? What's the
deal with the 500 null error, anyway? Has Adobe made any progress
with this issue?Okay, this is a followup to my previous post (
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=143&threadid=1165765&en terthread=y).
Replacing the license.properties file isn't sufficient in
addressing the 500 null error. We are running Ubuntu Linux. I
understand that I need to replace jvm 1.5 with jvm 1.4.2. I'm
honestly not sure how to detect on Linux which version of jvm is
running or how to make sure that version 1.4.2 is what is running
when we reinstall ColdFusion. If someone could help me with this,
I'd appreciate it. The 500 null error is eating my Web site like
the Langoliers. Even some static .cfm pages are failing now. -
Mat****a DVD-Ram UJ-841S comes up with multiple error messages
My laptop is relatively new, I've been Burning some Video files to DVD-RWs and suddenly my DVD drive has stopped working. It come up with multiple error messages ''format failed due to media damage'', ''format failed due to general failure'' and ''the disk inserted is READ ONLY''.
I also can't rip music from disks.By ODD the simply optical drive is meaning
You could try to remove the drive from the device manager. Then reboot your unit and then the drive should be recognized again. Check if you can burn another medias
But if you are not able to burn ONLY the DVD-RW in my opinion its not a hardware malfunction.
The RW medias must be firstly formatted before burning.
> 'format failed due to media damage'', ''format failed due to general failure'' and ''the disk inserted is READ ONLY''
The error messages in your first posting bake up my suggestion
Furthermore you have to check different brands. Not all medias are supported! -
Need to generate multiple error files with rule file names during parallel data load
Hi,
Is there a way that MAXL could generate multiple error files during parallel data load?
import database AsoSamp.Sample data
connect as TBC identified by 'password'
using multiple rules_file 'rule1' , 'rule2'
to load_buffer_block starting with buffer_id 100
on error write to "error.txt";
I want to get error files as this - rule1.err, rule2.err (Error files with rule file name included). Is this possible in MAXL?
I even faced a situation , If i hard code the error file name like above, its giving me error file names as error1.err and error2.err. Is there any solution for this?
Thanks,
DSAre you saying that if you specify the error file as "error.txt" Essbase actually produces multiple error files and appends a number?
Tim.
Yes its appending the way i said.
Out of interest, though - why do you want to do this? The load rules must be set up to select different 'chunks' of input data; is it impossible to tell which rule an error record came from if they are all in the same file?
I have like 6 - 7 rule files using which the data will be pulled from SQL and loaded into Essbase. I dont say its impossible to track the error record.
Regardless, the only way I can think of to have total control of the error file name is to use the 'manual' parallel load approach. Set up a script to call multiple instances of MaxL, each performing a single load to a different buffer. Then commit them all together. This gives you most of the parallel load benefit, albeit with more complex scripting.
Even i had the same thought of calling multiple instances of a Maxl using a shell script. Could you please elaborate on this process? What sort of complexity is involved in this approach.? Did anyone tried it before?
Thanks,
DS -
Error with multiple accessors in 10.1.2.1
I've an Entity say A wich has assiociations to 2 entities say B and C.
When I create a VO including both B and C and I try to reference also A I can choose both associations (good) but the query it creates uses allways the first one also if I chooes the second (wrong).
Is it a bug.
How can I solve that issue ?
Tks
TullioI don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex -
My blackberry crashed with multiple errors
hey guys my blackberry bold 9780 crashed and pops up multiple error messages including the following
applicationregistry.waitfor
java.lang.NullPointerException
java.lang.error
my desktop manager will not read my blackberry FYI
any takers on how to fix this problem?
ive tried master resets
If you can help me pleeeease do
Thank you everyoneHey The_Champs_Here,
Welcome to the BlackBerry Support Community Forums.
I would suggest following the steps in this KB article to bring the BlackBerry back to life: http://bbry.lv/cG8oe
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Multiple Issues with Adobe Creative Cloud app.
I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck! -
Upload multiple files WITH correct pairs of form fields into Database
In my form page, I would like to allow 3 files upload and 3 corresponding text fields, so that the filename and text description can be saved in database table in correct pair. Like this:
INSERT INTO table1 (filename,desc) VALUES('photo1.jpg','happy day');
INSERT INTO table1 (filename,desc) VALUES('photo2.jpg','fire camp');
INSERT INTO table1 (filename,desc) VALUES('photo3.jpg','christmas night');
However, using the commons fileupload, http://commons.apache.org/fileupload/, I don't know how to reconstruct my codes so that I can acheieve this result.
if(item.isFormField()){
}else{
}I seems to be restricted from this structure.
The jsp form page
<input type="text" name="description1" value="" />
<input type="file" name="sourcefile" value="" />
<input type="text" name="description2" value="" />
<input type="file" name="sourcefile" value="" />The Servlet file
package Upload;
import sql.*;
import user.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.Map;
import java.util.HashMap;
import java.util.Date;
import java.util.List;
import java.util.Iterator;
import java.io.File;
import java.io.PrintWriter;
import java.io.IOException;
import java.text.SimpleDateFormat;
import org.apache.commons.fileupload.servlet.ServletFileUpload;
import org.apache.commons.fileupload.disk.DiskFileItemFactory;
import org.apache.commons.fileupload.*;
public class UploadFile extends HttpServlet {
private String fs;
private String category = null;
private String realpath = null;
public String imagepath = null;
public PrintWriter out;
private Map<String, String> formfield = new HashMap<String, String>();
//Initialize global variables
public void init(ServletConfig config, ServletContext context) throws ServletException {
super.init(config);
//Process the HTTP Post request
public void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException {
request.setCharacterEncoding("utf-8");
response.setCharacterEncoding("utf-8");
response.setContentType("text/html");
PrintWriter out = response.getWriter();
Thumbnail thumb = new Thumbnail();
fs = System.getProperty("file.separator");
this.SetImagePath();
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
if(!isMultipart){
out.print("not multiple part.");
}else{
FileItemFactory factory = new DiskFileItemFactory();
ServletFileUpload upload = new ServletFileUpload(factory);
List items = null;
try{
items = upload.parseRequest(request);
} catch (FileUploadException e) {
e.printStackTrace();
Iterator itr = items.iterator();
while (itr.hasNext()) {
FileItem item = (FileItem) itr.next();
if(item.isFormField()){
String formvalue = new String(item.getString().getBytes("ISO-8859-1"), "utf-8");
formfield.put(item.getFieldName(),formvalue);
out.println("Normal Form Field, ParaName:" + item.getFieldName() + ", ParaValue: " + formvalue + "<br/>");
}else{
String itemName = item.getName();
String filename = GetTodayDate() + "-" + itemName;
try{
new File(this.imagepath + formfield.get("category")).mkdirs();
new File(this.imagepath + formfield.get("category")+fs+"thumbnails").mkdirs();
//Save the file to the destination path
File savedFile = new File(this.imagepath + formfield.get("category") + fs + filename);
item.write(savedFile);
thumb.Process(this.imagepath + formfield.get("category") +fs+ filename,this.imagepath + formfield.get("category") +fs+ "thumbnails" +fs+ filename, 25, 100);
DBConnection db = new DBConnection();
String sql = "SELECT id from category where name = '"+formfield.get("category")+"'";
db.SelectQuery(sql);
while(db.rs.next()){
int cat_id = db.rs.getInt("id");
sql = "INSERT INTO file (cat_id,filename,description) VALUES ("+cat_id+",'"+filename+"','"+formfield.get("description")+"')";
out.println(sql);
db.RunQuery(sql);
} catch (Exception e){
e.printStackTrace();
HttpSession session = request.getSession();
UserData k = (UserData)session.getAttribute("userdata");
k.setMessage("File Upload successfully");
response.sendRedirect("./Upload.jsp");
//Get today date, it is a test, actually the current date can be retrieved from SQL
public String GetTodayDate(){
SimpleDateFormat format = new SimpleDateFormat("yyyyMMdd");
String today = format.format(new Date());
return today;
//Set the current RealPath which the file calls for this file
public void SetRealPath(){
this.realpath = getServletConfig().getServletContext().getRealPath("/");
public void SetImagePath(){
this.SetRealPath();
this.imagepath = this.realpath + "images" +fs;
}Can anyone give me some code suggestion? Thx.When one hits the submit button - I then get a 404 page error.What is the apaches(?) error log saying? Mostly you get very useful information when looking into the error log!
In any case you may look at how you are Uploading Multiple Files with mod_plsql. -
Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment
I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
Abort Retry Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC ALASKA
A M I
FACP ALASKA
A M I
HPET ALASKA
A M I
MCFG ALASKA
OEMMCFG.
SSDT AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned. 0
unindexed files recovered. CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
43468 KB in 21139 indexes.
0 KB in bad sectors.
253139 KB in use by the system.
65536 KB occupied by the log file.
1905048300 KB available on disk.
4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts.
Maybe you are looking for
-
Report generation toolkit help
Hi, I have created a simple example to demonstrate my needs. Is it possible to write 16 numeric values (from my 16x for loop) "press and temp", to my new report (from my defined template). My two main issues are: Each time it iterates through the loo
-
How to present SAP R/3 data in SQL Server 2005 Reporting service?
Our company is using SharePoint Portal Server 2003 as our intranet. We are also using SAP R/3 4.6C to run their business. There are huge amount of important data in SAP database. There ere are business needs to present SAP data on SharePoint pages wh
-
Hello, Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of
-
I've just read, that you can 'tune' you iPod with windows. There are programs like iPodlinux (www.ipodlinux.org) (for more features) GoogleGet (The latest news on you iPod) iPodWizard (for changing fonts and graphics) and MarksMan (for bookmarks). My
-
Hi, New to Logic Express. I'm using it with a Mackie Universal Control Pro and I cannot get the 1st fader to move on the controller without the third fader also moving. Then in Logic the third channel is affected and never the first. How do I get thi