Multiple exposures DISABLE

just bought a 6d. was shooting Multiple Exposures, then disabled it to shoot normal but the feature was not disabled. it still is shooting Multipe Exposures. feel trapped . help. how do i get out of it or is it a camera defect?
thanks for any help
tom
Solved!
Go to Solution.

Are you talking about the multiple exposures mode that blends the photos together in-camera, or exposure bracketing where it takes 3 -7 photos consecutively, at different exposures, but leaves the files separate?
If the latter, I've had similar problems before when I tried to turn it on/off and exited out of it without actually turning it on/off (user error). I don't have my camera in front of me, but i was either not using the "set" button to confirm the setting, or I was and you don't have to. I can't remember which, but it's simple enough to go back in and confrim.
If the former, I can't say, I've never used that function. Does the menu say "disable"? If it really is stuck then you should try a factory reset.

Similar Messages

Nikon in-camera multiple exposure RAW in Photoshop trouble

I have a Nikon D7000, I use Photoshop CS5. I took multiple exposures in-camera in RAW and they appear fine on the back of my camera, and in the finder window on my Mac, but when uploaded and viewed through Bridge and Photoshop the images are monochromatic RED in color. I have contacted Nikon and they say they can not guarentee compatability with 3rd party software. No amount of editing, that I have found, returns the colors to where they should be (NOT RED). I only found one other discussion board adressing this issue, It was a Nikon, possibly D80(not sure, dont remember) no one left an answer on it and it was from 2011. Please help me figure this out, or update the RAW compatability please!!! thanks

I tried uploading the orgional RAW of this test shot before I took the real ones, but of course it was too big, so here is the JPG convert. On another shot (under camera calibration settings) I was able to get rid of much of the red, but most of the real color was lost and dark, and playing with saturation and other settings outside of camera calibration didnt do any good. Again the RAW looks fine in the on-camera thubnail preview and in the Mac finder window, but not in the ADOBE programs. THX for any help...

Nikon D800 Multiple Exposure problem in Aperture

When I shoot multiple exposures with the new Nikon D800, import into Aperture (latest greatest version with all updates up-to-date) the image imported looks NOTHING like what was on the saved/merged image in-camera and appears red-red-red. Shot a bunch last night had issue with every one. Think there might be an overlooked glitch here. Everything else seems to work 100% with D800, but this might be glitch.
So, I wanted to be sure I wasn't seeing things, took the camera to kid's soccer game today to further test, got home and loaded 'em into Aperture, same exact thing. The blown-out ones are the multiple exposures (look perfect in-camera) and as you can see the following photo is as it was shot (non-red ones to the right of the selected 5 that are blow-out examples.)

I don't think it's magic dust and it's definitely been used for more than 100 years....there aren't Multiple photos, it's 1 photo exposed multiple times with and end net of 1 photo. This is NOT like HDR where you have multiple photos at different EV and merge, this is 1 photo and shutter actuated on SAME photo multiple times. In other words, there is no "series" of photos to look at....1 photo. Cannot understand why Aperture is having stuch a problem with this when it didn't have the problem with D700 files.
Multiple Exposure Examples below.

In-camera multiple exposures

I don't seem to be able to use my Photoshop CS5 and Camera RAW to process my in-camera multiple exposure RAW photos. When imported, they have a reddish cast to them. This is not happening in other programs nor with regular RAW photos. Only multiple exposures made in my camera. Any suggestions?

What camera do you have? I use multiple exposures all the time with my Nikon D3 and D3X with no issue opening them or correcting them in ACR. I was doing this with CS5 for a long time. One thing about multiple exposures, if your white balance changes - at least with my Nikons - if usting auto white balance, it will apply the white balance of the first exposure to all the other exposures. If you white balance changes, a better option would be to take separate exposures and combine them in PS with the lighten blend mode or put them into a SO stack and use Mean or Mode.

How to erase a light stand from multiple exposures (same frame)?

I've taken a background shot without a light stand in the frame and then multiple exposures with the stand (lighting a model). The camera was mounted on a tripod so all frames should be perfectly aligned. Is there e a way to use that background shot to erase the light stand from all images?
Please help.
D.

Any soft edged brush. just hit the b-key. here is a simple example i did for you. I shot this farm scene on a tripod, first with no amish in it,then when they came by. imagine the amish were your light stand. use photo 1 to start and then drag photo 2 with the amish on top. next hit the layer mask icon,and brush the area were the amish are, and you will see the data from the first clean shot replace the data you did not want. hope that clarifies things for you.

Merging multiple exposures in PSE6

I believe there is a way to merge multiple exposures in Photoshop Elements 6. Does anyone know how to do this or can you steer me to a website that shows the procedure?
Thanks,
Stuart Klein

There are a couple of third-party plug-ins that do this, but I don't know for sure which are compatible with Elements 6. You might want to google around for HDR plug-ins and ask the developers of those that appeal to you. AFAIK none are free, so be sure to ask before buying.

Does the photomerge support Fisheye Lens and combinig multiple exposures into a panorama?

Does it support Fisheye Lens?
What about combinig multiple exposures into a panorama?
Thanks.

Hi Royi,
Fisheye should be supported, though the results will be interesting. Feel free to post your results here and let us know how it turns out!
For the multiple exposures, you're creating a panorama and for each of the pano images you have multiple exposures?
There isn't a photomerge with HDR merging capability, but you could perform Merge to HDR Pro and then perform a panorama on the resulting images.
Feel free to post with more info about your workflow!

Photoshop CC 14.1 editing paths on multiple layers disabled?

Has editing paths on multiple layers with the direct selection tool been disabled in Photoshop CC 14.1? I can't seem to figure out how to do it now, shift- or command-clicking doesn't do anything. In fact, I can't even click to select individual paths on different layers, something that Photoshop has had forever.
While it was at times problematic the way it was in 14.0 (always selecting multiple layers and having to go into isolation mode to edit just one), there were times when it was useful to edit multiple layers, or even just click between layers with the direct selection tool.
I've seen this documentation on the site, but I'm not sure it's very helpful. Can someone give me some assistance?
Also, what is the custom keyboard shortcut for entering/exiting isolation mode? It is mentioned in the above image, but what actually is it?

You can still work with paths the way you could in 14.0 -- just choose the All Layers mode in the Path Selection tool or Direct Selection tool options bar. We added the Active Layers mode for users who prefer to isolate which paths can be selected based on which layers they have already selected in the Layers panel.
To clarify:
-Active Layers mode: Clicking or dragging on the canvas with the vector selection tools will not affect which layers are selected in the Layers panel. Double-click to enter isolation mode is disabled.
-All Layers mode: Works just like in 14.0 -- clicking or dragging on the canvas with the vector selection tools can change which layers are selected in the Layers panel. Double-click to enter isolation mode is enabled.
If you find yourself switching between these two modes a lot, you can add a custom keyboard shortcut that will toggle which mode is selected. In the Keyboard Shortcuts dialog, choose Shortcuts For: Tools and scroll down to the Direct Selection Mode Toggle option. Add your new keyboard shortcut here.
As for your question about isolation mode keyboard shortcuts, this just means that you can assign a custom keyboard shortcut to this command as well (Select > Isolate Layers).

STSUPLD.DLL not recognizing as an add-on; upload multiple documents disabled

On my client system, Windows XP, Office 2007 and IE8 is installed. It is a 32 bit system. On the Sharepoint site, "upload multiple document" feature is disabled. After searching for the cause, I came to know about the STSUPLD add-on that needs
to be enabled otherwise it remains greyed out. So I copied the DLL file to C:/.../Office12/STSUPLD.DLL
IE does not detect any add-on when I start a new browser session. Between copying the DLL, and starting a new browser session, followed by checking Tools-->manage add-ons, am I missing an important step? (like installing...etc.)
Thanks

easy way is, if you can install the Office client on the server, the control will be available.
also check this post for further detail:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1a5af332-ed21-41ee-bf64-9122a7439623/sharepoint-not-activating-stsuplddll-upload-mutliple-documents-greyed-out?forum=sharepointgeneralprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Multiple Logon Disable in SAP

Hi,
I have disable the multiple login's in SAP through RZ10.When users network session was lost any reason.he will not able to login again
because the only option "Terminate this login " Showing . I want to enable other option "Continue with this logon & ends any other logon"
so the user are ends the free session.Please help
Rgds
sudarshan

Hi,
Please check the setting as '1' as in following screen shot .
You will find this error after setting as

Multiple Logon disable

Dear All ,
while multiple logon are performed.SAP pop-up a message with 3 options
1.terminate logon
2.continue with the logon
3.continue with the logon terminating other sessions.
Here we Want to disable the 2 option that is : continue with the logon.
Here we came to know : we can add the following parameterto the instance profile
logon/disable_multi_gui_login
Pl guide with the steps how to add this & where ( Tcode & procedure ) .
Regards

Hi,
Please go through the below SAPnote to get better clarity on it.....
Note 142724 - Prevention of multiple SAPGUI logons
PS: If this parameter is set to value 1, multiple SAPGUI logons (in the same client and with the same user) are blocked by the system. The parameter is effective during the SAPGUI logon. Logons to the system using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not influenced by the profile parameter. Furthermore, SAPGUI transaction calls (iViews) that are placed through the Workplace or the Enterprise Portal are not controlled with regard to multiple logons...
Regards,
PY

Multiple Exposure (LIve View overlay) on 5D MKIII

Not sure if someone can spread any light on this issue.....Trying to follow the video shown http://www.dylandsara.com/canon-5d-mark-iii-double-exposure-tutorial/
And when i switch to the Live View mode to see the overlay there is nothing there.....like shown in the video....and switching back out of live view i find the function disabled....
Maybe this is a firmware update issue, in that I have updated the camera to the latest release from Canon version 1.2.3
EOS 5D MKIII + EF 24-105mm f/4L IS USM, Sigma DG 150-500 5-6.3 APO HSM, , EF 55-200mm 4.5-5.6 USM, Speedlite 430EXII
EOS 350D, EFS 18-55mm

Okay...found out how this is done after further reading and playing about with the camera
You don't actually switch the button from picture mode to Live View Mode.......
what you have to do is press the Start/Stop button in the middle of the switch that you would normally use if you were to switch to Live View Mode and Record a video...
EOS 5D MKIII + EF 24-105mm f/4L IS USM, Sigma DG 150-500 5-6.3 APO HSM, , EF 55-200mm 4.5-5.6 USM, Speedlite 430EXII
EOS 350D, EFS 18-55mm

Is copying and pasting multiple keyframes disabled?

I haven't used after effects for a year or so, but I am 100% positive that I was able to copy multiple keyframes or duplicate them just by holding down the alt key and dragging, or by hitting cmd+c and cmd+v. I'm trying to do that now but it copies the actual layers, not the keyframes and I found a plugin here http://aescripts.com/paste-multiple-keyframes/ that lets you copy and paste multiple keyframes .. I really don't understand why adobe would disable such a helpful feature, could anyone let me know if they have the same problem or am I doing something wrong? I'm desperate!
Thank you

> I am 100% positive that I was able to copy multiple keyframes or duplicate them just by holding down the alt key and dragging
That has never been a feature of After Effects.
> hitting cmd+c and cmd+v
I just tried copying and pasting multiple keyframes using these commands, and it worked fine for me.
> I really don't understand why adobe would disable such a helpful feature,
We changed nothing in this area.

How do I avoid multiple exposures in iPhone?

I recently took some pix with my iPhone 4S (IOS 7.0.4) that I thought were single exposures. When I uploaded them, however, there were three or four of each. In one case, there were eight almost identical exposures of the same photo. I must be holding my finger down on the touchscreen button too long. (No, I am not in HDR mode.)
Is there an alternate explanation? Is there a setting that I can go to to eliminate this?

Not directly. You could restore your iPhone 5s with the backup containing the photos you are looking for and then save them to Dropbox. Then restore the iPhone 5s to the iPod Touch Backup and load the photos from Dropbox.

HR ABAP: LOOP AT SCREEN: Multiple Fields Disabling.

Experts,
Am a new member in the world of SAP ABAP!
Need ur advice regarding.
Have coded following for disabling a field in PBO based on subtypes.
    IF p9235-subty = GC_AICTD.
      IF screen-name = 'P9235-ZZ_RC_MDE'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
This disables the particular field mentioned in the screen name.
If i want more than on field names to be disabled under single validation, then what should i do?
Your help to this fresher would be appreciated!
Points will be definitely rewarded for your help and time...
Thank you.
Sundar.

*&      Module display OUTPUT
      text
MODULE display OUTPUT.
*break-point.
loop at screen.
if create = 'X'.
if screen-group1 = 'XXX'.
screen-input = 1.
modify screen.
endif.
endif.
if display = 'X'.
if screen-group2 = 'YYY'.
screen-input = 0.
modify screen.
endif.
endif.
endloop.
ENDMODULE.                 " display OUTPUT
but declare the group!

Multiple exposures DISABLE

Similar Messages

Maybe you are looking for