Multiple failure during exporting and recording

Hello everyone,
I'm currently helping a friend to create a slideshow to be used on their wedding banquet that talks about their childhood and love story. It's a combination of photographs, with 1 short video clip. As well as 1 personally remixed soundtrack to be played on the background. The whole slideshow plays for a good 8 min 36 sec due to the fact that the bride have asked for an edited soundtrack (combination of several songs being edited into one track).
To make it brief, this slideshow have 95 slides, divided into sections: childhood, dating, engagement portraits, overseas engagement party, pre-wedding portraits. Each transition (style/effect) , transition duration, and transition delays varies as I have to match it with each sections of entire soundtrack.
Everything went perfectly............... if it's only playing (preview) on my own MacBook Pro.
I have read through the user guide, troubleshoots, tutorials video clips on YouTube, and suggestions posted by other users on the forum. Unfortunately, nothing works for me, and I couldn't find out what went wrong. I even tried to play the .key file on another Mac, all the transition duration and transition delays which I have pre-set individually were still messed up. Even experienced a major delay (up to 10 sec pause after playing the slide which contains a short video clip).
And, I did followed the instructions to make sure the "include audio (sound files, movie audio)" and "include slideshow soundtrack" boxes are checked.
I have stumble upon the following problems:
When I tried to record the slideshow, the audio plays way faster than the slides.
After I tried to export as QuickTime Movie, only the first 4 slides kept jamming while the audio continue to play, and the rest of the 91 slides doesn't even show.
I tried to export as all available options/file size of the QuickTime Movie, same results occurred.
Same thing happened as I tried to export to iDVD.
I also tried to export as iTunes Movies, the duration of the entire slideshow went from 8 min 36 sec to 11 minutes+. And, transition duration and transition delays which I have pre-set individually were all messed up.
I even tried to export to a copy of Microsoft PowerPoint presentation, it doesn't even play at all.
My goal is to successfully burn this slideshow into a DVD as a movie for the wedding couple, so they can keep it after playing it on their banquet.
I really don't know what else to do in order to get done, I'm desperately hoping any Keynote '09 experts could kindly give me some advise and/or solutions. Thank you very much for your time on reading this, and all your help would be greatly appreciated!

Sounds like you are hitting all the big problems in one slideshow! There have been numerous posts here about the Keynote timing getting messed up on export to Quicktime. There have also been problems with exporting video clips when there is a soundtrack or voiceover.
Try removing the soundtrack from the Keynote so all you have are the slides with pics and video. Record the slideshow to get the timing of the transition. Then export that to Quicktime and make sure to uncheck the box that says to include recorded audio. Then import it into iMovie. Once in iMovie add the soundtrack. This way if the timing gets messed up on the slides, you can add the individual songs that make up the soundtrack and adjust where to fade out and bring in the next one. With iMovie, it is still easy to send to iDVD to burn your DVD.
Hope this helps and let me know if you have any more question or if you run into some other problem.

Similar Messages

Connection for added/updated objects during export and import

Hi,
Plz help me..
During export and import of updated/added objects to production,
do we need to create the dataservers manually or else how can it be managed for an existing object???
Thanks..

eg AD_CTX_DDL
APPS_ARRAY_DDL
APPS_DDL
ORA-20000 APPS_DDL/APPS_ARRAY_DDL package(s) missing or invalid in schema CTXSYS (Doc ID 944150.1)
CS_KB_CTX_PKG. I think these are packages.Run the following scripts from $CS_TOP/patch/115/sql directory:
cskbdstb.pls
cskbdsts.pls
Also I am missing certain privileges on packages given to system and application users by sys eg DBMS_SHARED_POOL. I have already executed adgrantsHave you run recreate grants and synonym from adadmin?
Thanks,
Hussein

CPU overload during playback and record

This happens here and there but is not a consistent problem, and for that reason I feel that it can be corrected. Out of the blue, during playback or record, all of the sudden my CPU meter will start spiking and the audio will start getting interrupted until it just gives up and I get a dialogue box saying overload. I always make sure all other applications are closed to avoid this. What else can I do?

1. Have an empty Audio Track selected during playback (= no need for Logic to wait for realtime MIDI input)
2. Increase Audio Buffer
3. Turn off "safety" buffer. "safety" is very misunderstandig... In fact, it makes things unsafer in terms of playback stability. (BTW: Did anyone find out which "safety" is meant, anyway?)
4. Turn off Airport, go offline, turn off antivirus and such things. Just let Logic be the only big application running.
5. After some playbacks, the caches should provide enough information so that Logic runs more smooth than with the first playback. So - if you need Logic as live tool, let it play the project once or twice before.
Fox

Problem during export and data

I have 60GB of mount point OS level but my estimated dumpfile size 150 GB.
How i will take the back up of the database using Simple export and Datapump utility
We are using Red hat Linux OS and database version 10.2.0.4
I am new to oracle .
Thanks
sanjaya

>
I have 60GB of mount point OS level but my estimated dumpfile size 150 GB.
How i will take the back up of the database using Simple export and Datapump utility
>
Yes, use RMAN for backups. This export won't let you restore everything if your database crashes after an hour your export finished. You would have lost an hour of data. With RMAN, it will take hardly 1/5th of the export time and it is reliable when recovery situation occurs.
By the way, if you use traditional export (not the datapump), you can use pipe to compress the data as the data gets exported.

Ora-1555 during exports and imports. possible causes. ?

From my understanding : I know that this error will occur due to a undo retention being smaller sizer. or rather I should put it that increasing this parameter should help fix the issue.
Whats not clear is below :
Qn. Is it possible that ORA-1555 errors can occur during 'import' even if no other sessions are connected and performing any transaction/dmls ?
Qn. Also why does a ORA-1555 occur during a 'export' ? Is the same reasons ie. there could be possible DMLs occuring ?

Hello,
About your first question:
Qn. Is it possible that ORA-1555 errors can occur during 'import' even if no other sessions are connected and performing any transaction/dmls ?I've never got this error during import but, I always care to get enough place on the UNDO Tablespace.
With classical import you have a commit after each Table's import (by default) and a commit after each row's import if COMMIT=Y so as to use less space in the Rollback Segment.
With Datapump, I often decrease the undo_retention parameter before importing so as to use less space on the UNDO Tablespace.
About the second question:
Qn. Also why does a ORA-1555 occur during a 'export' ? Is the same reasons ie. there could be possible DMLs occuring ?To get a consistent image of the exported data with the classical export you may use the parameter CONSISTENT=Y. While you may use the FLASHBACK_TIME parameter with Datapump (so it means that the undo_retention should be large enough when exporting).
Both use the Undo entries, so I imagine that's possible to get some error (may be ORA-01555) if you don't have enough place on your UNDO Tablespace.
It's possible (thank to the Rollback Segments) to have concurrent DML on the database while exporting.
Anyway, from my point of view, while exporting or importing if you have enough space on your UNDO tablespace and a correct undo_retention setting (not too large when importing not too small when exporting) it should be fine.
Hope this help.
Best regards,
Jean-Valentin

Multiple analog events counted and recorded to file

I have this VI that I created where Ch 5 is attached to a reed switch on a door and counts how many times the door is opened and writes a date and time stamp to file each time and also updates the numeric counter on the front panel. I would like to add 4 more switches with the same functionality and have them all write to the same file in different columns. I have tried a number of different approaches to make this happen but can figure out what I’m missing. Any thought on how I could add the same function with more switches? Eventually I would like to be able to not only record when the door is open but for how long it stays open for. Thank you.
Solved!
Go to Solution.
Attachments:
Pressure + Temp.vi ‏141 KB

It is true that local variables are not the most efficient communication method and they are not recomended to pass information among loops, mainly because they can create horrible reace condition errors. However, in this case I only read information from the local variables (except from the stop button, which should not be a problem either), so race conditions will not be a problem. Still, that's why a "more elegant solution" probably exists.
Also, I used a flat sequence structure to initialize the controls before execution and to force the initialization to happen before enything else. I guess you can use is to initialize the 0 constant outside the top while loop (even though I doubt there will be a rece condition there, it might e the only possible source for any).
About how to display only the total time, you should be able to do that by playing a littile with the shift registers and the select function. For example, what I did was to show the Elapsed Time.vi output if the boolean controls are on, and show the shift register value if they are off. Instead, you can simply add a second Select function on each elapsed time "circuit" so that the indicators will show the shift register value only when the boolean controls are off.
Camilo V.
Applications Engineer
National Instruments
www.ni.com/support

Power failure during Quicktime screen recording: can I recover the file?

While wrapping up a 40-minute web conference that I was recording via Quicktime, the power went out. Is there any way to recover the movie-in-progress? Thanks for your help!

Hi,
There's some way to try it althought chances are low due the rebooting and problaly loss of the temporary files. Please take a look at following link How to recover a movie after QuickTime crashed?
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Regards,
Javier

Dropped frames during playback and Record To Tape

Mac G-5, OS X 10.4.4; 4 X 2.5 GHz; 4.5 GB DDR2; NVIDIA GeForce 6600 w/256MB.
G-Raid 1TB, Format Mac OS Extended; External FireWire 800 port.
Maxtor 300GB Internal, Format Mac OS Extended (journaled)
Tape deck, Sony Mini DV GV-D1000 NTSC FireWire 400 port used for digitizing and mastering.
Have searched forum for solution to dropped frames. Based on other suggestions, set Final Cut Pro 5 RT button to SafeRT; Playback quality to High; Playback Frame Rate, Full. Compression rate at 75%. Sequence > Render All-Video Needs Rendering;Audio, For Playback Render Only-Mixdown.
System Settings--Scratch Disk Video Capture and Audio Capture set to RAID. Video Render and Audio Render set both to Maxtor or RAID. Either case dropped frames.
User Preference--Real-Time Audio Mixing, 2 tracks (have also tried 4 tracks, which equals # of tracks actually used).
In spite of changing all the above settings, I still get dropped frames. Am I missing yet another setting that will fix the problem?
Kerwin

Any heavy filtering and/or effects?...including audio, since you've specified the same number of audio tracks in your real-time audio prefs that you're working with...
...and yes, please explain 75% compression...
K

Multiple Failures with Auto Export Private Preview for one DB

My Customer has received 7 failures so far this month for their daily exports for a specific Database. While they understand this service is in private preview,
this failure rate is abnormally high from their experience with this service and the Customer is asking for Microsoft to investigate. They are not experiencing this same failure rate on any of their other production DB exports. The
error logs show the following:
Start Time: Saturday, July 05, 2014 2:08:01 AM
End Time: Saturday, July 05, 2014 2:29:50 AM
Subscription ID: <SUB ID>
Server Name: <SERVER NAME>
Database Name: <DATABASE NAME>
Operation Name: Export
Operation ID: e8f916a6-838d-457c-be3c-83257b7c039b
Status: Failed
Details: Error encountered during the service operation.
Could not connect to database server.
Cannot open database "<DATABASE NAME>" requested by the login. The login failed.
Login failed for user '<DB ADMIN USER>'.
This session has been assigned a tracing ID of 'ebc9b95b-e777-49b1-82d8-064549c6fe95'. Provide this tracing ID to customer support when you need assistance.
Can we please have an Engineer supporting the Auto Export Private Preview review this matter and the error logs further to help us understand if the multiple failures are considered
normal or high?
Thank you,
Frank Ellero
Frank Ellero - Microsoft Corporation

Hi,
The error you have mentioned points to the connectivity issues to the database.Please have a check on the below link for more information:
http://social.technet.microsoft.com/wiki/contents/articles/1719.windows-azure-sql-database-connectivity-troubleshooting-guide.aspx
http://support.microsoft.com/kb/2980233/en-us
If the issue persists, I would recommend that you have a
Technical Support Ticket opened as it would require dedicated troubleshooting.
Regards,
Mekh.

System failure during locking GL account 5555 by 13113910 Message no. 8I076 and the time of saving out going excise invoice.

Hi SAP Gurus,
We are configuring the CIN Settings for our client and at the time of testing, while saving the Out going excise invoice the system is giving the error as “Balance in Transaction Error” and when pressed enter the system displays the error as “ system failure during locking GL account 5555 by 13113910.”
We have configured Out going excise duty condition types in the SD pricing procedure
and
also maintained the same condition types as mentioned below in the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / MAINTAIN EXCISE DEFAULTS
under the headings
AR BED Cond – JEXP
AR Cess Cond – JECS
ECS AR – JHEC
And also maintained the settings in the Path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / SPECIFY EXCISE ACCOUNTS PER EXCISE TRANSACTION and also in SPECIFY G/L ACCOUNTS PER EXCISE TRANSACTION .
But still the above mentioned error is comming.
Note : error in not coming when I am removing the JHEC condition type from the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / under the heading ECR AR, But we need the JHEC(ie. Higher education cess) also in out going excise invoice.
Please let me know what is the issue and how to resolve it.
Thanks & Regards
Shashi

Dear We faced the same issue and almost for 20 days to get it resolved.
For this kind of error firstly Check have you activated the Liable for AT1 indicator in(IMG>>Log.General>>Tax on goods Movement>>India>>Basic Settings>>Maintain Excise registrations)
Also Have you assigned Proper GL account in (IMG>>Log.General>>Tax on Good Movement>>>India>>>Account Determination>>Account determination per Excise transaction type.
Here pl check the relevant GL has been assigned for
1.RG23A BED(for Both incoming and outgoing excise invoice updations against your ETT)
2 RG23C BED, (for Both incoming and outgoing excise invoice updations against your ETT)
3 .OFF SET,(for Both incoming and outgoing excise invoice updations against your ETT)
4 MODVAT.CLEARING, (for Both incoming and outgoing excise invoice updations against your ETT)
5 PLA BED& AED & SED,(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
6 PLA CESS(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
7 CENVAT ON HOLD(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
8.CENVAT SUSPENSE(for Both incoming and outgoing excise invoice updations against your ETT at the time of invoice posting)
9.PLA ON HOLD((for Both incoming and outgoing excise invoice updations against your ETT at the time of TR6c)
10. CENVAT REVERSAL(For cancellations vs ETT)
11. RG23A ECS(for Both incoming and outgoing excise invoice updations against your ETT)
12. RG23C ECS(for Both incoming and outgoing excise invoice updations against your ETT)
13. PLA ECS(for Both incoming and outgoing excise invoice updations against your ETT )
14. RG23A AT1(check this more carefully)
15. RG23C AT1(check this more carefully)
16. PLA AT1(check this more carefully)
Hope this helps you...
Phanikumar

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

Shell Script For Export And Import Of Table Records

Hello,
We have production and test instances and for constant testing we need to copy data from production to test or development environment.
At the moment what we do is manually doing export and import table records. At times this could be very tedious as we may need
to do this exercise a couple of times in a day.
Is it a good idea to do this exercise using shell script? If so how could I do this? If this is not a good idea what are the best alternatives?
Any input is highly appreciated.
Thanks

Ah I see, your company prefers stupidity over efficiency. It would be possible to do it in a controlled environment, wouldn't it? Also the test database would be allowed to select only.
So the non-allowance is just plain stupid.
To the second question: do you use hard-coded passwords in shell scripts?
Don't you think that poses a security risk?
Don't you think that is a bigger risk than a database link, properly set up?
In my book it is!
Sybrand Bakker
Senior Oracle DBA

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Read this
http://support.apple.com/kb/ts1583

ARRAY and records at multiple level ? please help

Hi experts!!
I am struck up with a problem. If u can please help me.
I need a structure of this type.
create type GRADE as object(
grade varchar2(30)
/ -- works fine , creates
create type GRADE_ARRAY as VARRAY(10) of GRADE;
/ -- works fine and creates
create type SPECIES as object
Species_number number,
array_of_grade GRADE_ARRAY
/ works fine
create type SPECIES_ARRAY as VARRAY(20) of SPECIES;
-- error comes here.. Can not have multiple level..type error
and so can not go ahead. In fect I wanted to use next level also. like this.
The next command remains my dream only then because I could not create the SPECIES ARRAY it self..
create type TIMBER as object
timber_mark varchar2(6),
no_species number,
array_of_species(20) SPECIES_ARRAY
the problem is for multiple level ARRAY AND RECORD/object combination..
I tried with OBJECT AND VARRAY it does only for one level.. not even two level.
my Mail ID:
[email protected]
Thanks and Regards..
Virendra chauhan

I think multi-level collections was first implemented in 9.2. You failed to mention what version of the DB you are using.

Multiple failure during exporting and recording

Similar Messages

Maybe you are looking for