Multiple Failures Related?

Here's an oddity. Software Update--gets only 15% into action then freezes before finding anything. Disk Utility--searches forever, and can't even find the disks. Downloaded Security Updates and Java Updates--non compos mentis, get part way through, then can't Continue.
B'b'but the OS X 10.4.9 Update (downloaded manually) did its thing just fine.
Is there some easy fix? (Throw away the Xyz, Luke...)
-iNova

Hi,
Please try this guide to make native boot from VHD for Windows 10, I have tested it, and it works fine.
Boot to VHD (Native Boot): Add a Virtual Hard Disk to the Boot Menu
http://technet.microsoft.com/en-in/library/hh825691.aspx
Make sure that you open the command prompts as Administrator before running command to create VHD and deploy Windows 10 into this VHD.
If you still get permission error, considering that permission of current account may be corrupted, please try this again by login with built-in administrator.
Kate Li
TechNet Community Support

Similar Messages

Multiple Failures with Auto Export Private Preview for one DB

My Customer has received 7 failures so far this month for their daily exports for a specific Database. While they understand this service is in private preview,
this failure rate is abnormally high from their experience with this service and the Customer is asking for Microsoft to investigate. They are not experiencing this same failure rate on any of their other production DB exports. The
error logs show the following:
Start Time: Saturday, July 05, 2014 2:08:01 AM
End Time: Saturday, July 05, 2014 2:29:50 AM
Subscription ID: <SUB ID>
Server Name: <SERVER NAME>
Database Name: <DATABASE NAME>
Operation Name: Export
Operation ID: e8f916a6-838d-457c-be3c-83257b7c039b
Status: Failed
Details: Error encountered during the service operation.
Could not connect to database server.
Cannot open database "<DATABASE NAME>" requested by the login. The login failed.
Login failed for user '<DB ADMIN USER>'.
This session has been assigned a tracing ID of 'ebc9b95b-e777-49b1-82d8-064549c6fe95'. Provide this tracing ID to customer support when you need assistance.
Can we please have an Engineer supporting the Auto Export Private Preview review this matter and the error logs further to help us understand if the multiple failures are considered
normal or high?
Thank you,
Frank Ellero
Frank Ellero - Microsoft Corporation

Hi,
The error you have mentioned points to the connectivity issues to the database.Please have a check on the below link for more information:
http://social.technet.microsoft.com/wiki/contents/articles/1719.windows-azure-sql-database-connectivity-troubleshooting-guide.aspx
http://support.microsoft.com/kb/2980233/en-us
If the issue persists, I would recommend that you have a
Technical Support Ticket opened as it would require dedicated troubleshooting.
Regards,
Mekh.

ETL failure relating to SDE_ORA_PersistedStage_WorkforceEvent_Salary_Full

Hi everyone,
I am getting error at ETL failure relating to SDE_ORA_PersistedStage_WorkforceEvent_Salary_Full
READER_1_1_1> RR_4035 SQL Error [
ORA-00907: missing right parenthesis
Database driver error...
Function Name : Execute
SQL Stmt : SELECT
assignment_id
,person_id
,pay_proposal_id
,proposal_reason_code
,CASE WHEN proposal_reason_code IS NOT NULL
              THEN 'PROPOSAL_REASON'
END    proposal_reason_type
,effective_start_date
,effective_end_date
,business_group_id
,salary
,annualization_factor
,salary_change_ind
,currency_code
, NVL(last_sal_incr_dt, LAST_VALUE(last_sal_incr_dt IGNORE NULLS) OVER (PARTITION BY assignment_id order by assignment_id, person_id, effective_start_date) ) last_sal_incr_dt
FROM
select
tab.assignment_id
,tab.person_id
,tab.pay_proposal_id
,tab.proposal_reason_code
,'PROPOSAL_REASON' proposal_reason_type
,tab.effective_start_date
,tab.effective_end_date
,tab.business_group_id
,tab.salary
,NVL(tab.pay_annualization_factor, NVL(tpt.number_per_fiscal_year, 1))
                           annualization_factor
,tab.salary_change_ind
,tab.currency_code
,tab.data_last_update_date
,CASE WHEN tab.salary_change_ind = 1
      THEN tab.effective_start_date
END last_sal_incr_dt
from
(select /*+ USE_HASH(asg pro pet piv ppb) */
   pro.assignment_id
,asg.person_id
,pro.pay_proposal_id
,pro.proposal_reason     proposal_reason_code
,pro.change_date         effective_start_date
,NVL(LEAD(pro.change_date, 1) OVER
         (PARTITION BY pro.assignment_id ORDER BY pro.change_date) - 1
      ,to_date('31-DEC-4712','DD-MON-YYYY'))     effective_end_date
,asg.business_group_id
,pro.proposed_salary_n                         salary
,ppb.pay_annualization_factor
,CASE WHEN pro.proposed_salary_n = LAG(pro.proposed_salary_n, 1) OVER
         (PARTITION BY pro.assignment_id ORDER BY pro.change_date)
        THEN 0
        ELSE 1
   END                  salary_change_ind
,pet.input_currency_code     currency_code
,pro.last_update_date       data_last_update_date
,asg.payroll_id
from
   per_pay_proposals       pro
,per_all_assignments_f   asg
,per_pay_bases           ppb
,pay_input_values_f      piv
,pay_element_types_f     pet
where pro.approved = 'Y'
and asg.assignment_id = pro.assignment_id
and pro.change_date between asg.effective_start_date and asg.effective_end_date
and asg.pay_basis_id = ppb.pay_basis_id
and ppb.input_value_id = piv.input_value_id
and pro.change_date between piv.effective_start_date and piv.effective_end_date
and piv.element_type_id = pet.element_type_id
and pro.change_date between pet.effective_start_date and pet.effective_end_date
)    tab
,per_time_period_types   tpt
,pay_all_payrolls_f      prl
where tab.effective_end_date >= TO_DATE('01/01/2008 00:00:00', 'MM/DD/YYYY HH24:MI:SS')
and tab.effective_start_date between prl.effective_start_date (+) and prl.effective_end_date (+)
and tab.payroll_id = prl.payroll_id (+)
and prl.period_type=tpt.period_type (+)
ORDER BY assignment_id, person_id, effective_start_dateI found a document on metalink which talks about this problem
*ETL failure relating to SDE_ORA_PersistedStage_WorkforceEvent_Salary_Full (ORA-00907 Ignore Nulls) [ID 1068337.1]*
This document talks about the SQL query has "IGNORE NULLS" which does not work on 9i but I work on 10g and the above query works fine when run separately in TOAD over my 10g database
My Environment:
EBS: EBS11_5_10,
Oracle Database: 10g
OBIEE 10g
PC 861 and HF 11
DAC 10.1.3.4.1 with its Patch
DAC server, Informatica Servers, 10g DW, OBIEE, OBIA on RHEL5(64bit)
Clients on Windows 32 bit
OLTP for EBS on RHEL 5 64 bit
Can some one help me please.
Moreover, where should I go and change this query if needed.
Thanks in advance

Try to remove this clause 'IGNORE NULLS' from your NVL statement. This was put in considering sql server and oracle treats NULLS differently when an order by is issued. You should be fine without that cluase. Add the last_sal_incr_dt in your order by clause in the OVER clause of your NVL statement.
Award points if its helpful; Close the thread if its answered and correct.

I purchased CS6 and am now just using it. I am trying to use Illustrator and it keeps giving me multiple errors relating to plug ins. It won't let me do anything, literally.

I purchased CS6 and am now just using it. I am trying to use Illustrator and it keeps giving me multiple errors relating to plug ins. It won't let me do anything, literally.

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

HD blower multiple failure

My question is what issues are expected with multiple HD blower failures?
The 1st HD blower was replaced after 16 months of use.
Then the 2nd HD blower was replaced within 30 days.
Then the 3rd HD blower was replaced eight months later, when it was also discovered that they installed a 27" HD blower instead of a 24" but that one only last two weeks before....
The 4th HD blower was installed.
Does anyone know what repairs, if any, are in the future for this early model 2008 24" iMac?
Wait... the ODD, LCD, CPU blower and temperature sensor cable have already been replaced. Yes, that is right, seven repairs already.

ba rok wrote:
Does anyone know what repairs, if any, are in the future for this early model 2008 24" iMac?
Nobody knows what the future will bring, but if it were my iMac & it had this history of repairs (& they all were done by Apple certified technicians) I would call AppleCare & (politely but firmly) make known my dissatisfaction with the quality of the repairs & of your particular hardware & ask what Apple is willing to do about it.
It is possible your iMac is a "lemon" -- poorly assembled or with defective original parts -- or that there is some as yet undetected problem that can be but as yet has not been corrected that is causing the eventual failure of other parts.
Even if Apple doesn't do anything now, documentation of the problems & repair history gathered together in one Applecare "incident" report (with a reference number you can refer to) may help in the future, beyond when the warranty expires.

Report multiple failures with TestStand reporting

I'm pretty new to TestStand so please bear with me. I'm using LabView to test a connector on a digital interface board. So I'm reading and writing dig. signals on say 15 pins in a test. I'm using TestStand to run my VI's. When a test fails TestStand seems to only report one measurement at a time. I want all of the pins that failed to show up in the TestStand report in a format like :
InputPin:A1 OutputPin:B1 Expected:0 Read:1
InputPin:a2 outpuPIn:b1 expected:1 read:0
I tried using the ReportText section of the TestData Cluster but I couldn't format it properly. All of the data sort of runs into each other like this
input:a1 output:b1 expect:0 read:1 input:a2 output:b2
the carriage returns I tried to put in were i
gnored.
Does anybody know how I can report a lot of failures in one report. I hope I explained properly.Thanks

Hi,
Find attached an example using the MultipleNumericLimitTest step type.
All it does is use the array found in Locals call Digital as the DataSource for the Limits. You can check this by selecting the step and doing a right mouse click - select Edit Limits. Then select the Data source Tab. I have add 16 Measurements, one for each of the array elements.
This will give a you a result of each element of the array in the report for that step. But by default it will look like:
Measurement[0] (Measurement 0):
Limits:
Low: 0b1
Comparison Type: EQ (==)
Data: 0b0
Status: Failed
To get the format you require will mean modifying the report sequence file.
Hope this helps a bit
Regards
Ray
Farmer
Regards
Ray Farmer
Attachments:
Sequence_File1.seq ‏26 KB

Multiple failures after updates Windows 7 64 bit Home Premium

After loading the latest set of updates for my Windows 7 Home Premium 64 bit operating system and rebooting, I am now experiencing a cascade of failures. None of my network (wireless or ethernet) adapter or miniport drivers
will load. my firewall will not load or has failed. I cannot logon to my Event Viewer to figure out what failed and my Microsoft NET is giving me errors when I try to access anything that might help me figure out what went wrong. So far I
have done a system restore back to before the update, but it did not fix the problems. I have tried to use Microsoft Fix it, but that must access the internet. I am sending this from a different computer because I cannot get online with the other.
Can anyone give me a clue where to start fixing these problems or do I have to completely reinstall my operating system?
Thanks.

Hi,
In this case, you can try repairing windows image using DISM command.
http://technet.microsoft.com/en-us/library/hh824869.aspx
If it still can't work, please make a repair install to fix your system.
http://support.microsoft.com/kb/2255099
Andy Altmann
TechNet Community Support

Multiple Failures with Auto Expert private preview for one DB

My Customer has received 7 failures so far this month for their daily exports of a specific Database. While they understand this service is in private preview,
this failure rate is abnormally high from their experience with this service and the Customer is asking for Microsoft to investigate. They are not experiencing this same failure rate on any of their other production DB exports.
Please advise.
Thank you,
Frank Ellero
Frank Ellero - Microsoft Corporation

Hello,
Did you review the import and export history?
You can see the status and history of a scheduled export operation on the History tab of the SQL Database server. It may provider more information about the failed export operation.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Displaying multiple roles related to a single key value in a single view MVC 4

Dear Team,
My name is Ajay Sutar. I am newly learning MVC 4, as we are about to initiate a new project in ASP .NET MVC 4. I am using a details scaffolding to display a single
record. but now my single employee have multiple roles. As example,
Emp_no | Role | Salary
E1 | Software Engineer | 10000
E1 | Tester | 10000
as i have used Details scaffold and FirstOrDefault method of linq for this view, I am unable to display the second role "Tester" in the output. only first role is geeting displayed.
What i want is :
Emp_no : E1 Role: Software Engineer Salary:10000
Tester

Hello,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because you are working with ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Multiple failure captions on one slide...?

Can anyone offer any advice with this please?
I use Captivate 3 to produce training for software applications. In the past I have tried to limit the amount of buttons and/or click boxes that have failure captions to a maximum of one or two per slide. This is purely to prevent the problem where a previous failure caption appears when an incorrect option is chosen later on in the same slide, even where the click box/button is clearly separated from the next one on the time line and the 'focus' is changed as well. This removed the problem but incresed the file sizes
So, in trying to keep the filesize of my software application movies down I have started building cp files where I have fewer slides with graphic elements appearing and disappearing throughout....the difference in the published files is huge but I now have the problem back where I may have several failure captions corresponding to several click boxes/buttons on the same slide. The 'bad behaviour' is that, again, the first failure caption will appear all the way through any incorrect choices made on any of the remaining click boxes/buttons on that slide.
I have separated all the buttons etc. from each other on the time line but the problem persists. Can I really only have one or two click boxes/buttons with a failure caption on each slide or am I missing something?

Hi there
Have you examined the properties for the objects and enabled the pause for the failures?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Can an email be sent to multiple users related to an activity?

Hi,
Is it possible to automatically send and email to all the users who have been added from the Users related information section in an appointment? It should work such that everytime I modify the appointment/task, and email notification is sent to all the users in that list notifying that an update has been made to the appointment.
I tried to use workflows but there doen't seem to be an option to send email to all the users associated to appointment.
Regards,

Not possible directly through workflow email. You could use integration events and web services to retrieve the list of users and their email addresses and use an external email system to send the email.

Fixed Lot Multiple in relation to the Min Order Qauntity

Hello, let me first Introduce myself.
I'm new on this forum , and hope to get some answers to my questions about some possibilities of the Oracle system.
Can someone tell me the relationship of the Fixed Lot Multiple towards the Minimum Order Quantiy. To specify this;
What if the Minimum Order Quantity is lower then the Fixed Lot Multiple?
Thanks in advance,
Joost van de Pol

Hi Niels,
Thanks for your quick reply.
So in the situation as described, the order quantity will be 60 pcs. And I understand this, but when the FLM is lower then the Min Order Quantity?
In my siuation, I don't want to order more then the min order quantity, so the Fixed lot multiplier can be the half of the min order quantity, for example:
Minimum Order quantity---------Fixed Lot Multiplier Good-----------Fixed Lot Multiplier Wrong
50-------------------------------------------------25--------------------------------------30
And when the demand is now 50 pcs, the system will suggest an order for 50pcs(FLM Good) or for 60pcs(FLM Wrong) <-- When you use my given parameters.
I just want to know if the FLM is leading as well as it is lower or higher then the Min Order Quantity.
And yes, it is possible.
Regards,
Joost
Edited by: user10798147 on Jan 15, 2009 6:32 AM
Edited by: user10798147 on Jan 15, 2009 6:32 AM

I seem to have multiple problems related or unrelated. I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line. My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
S

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

Multiple failures after 2 HD changes

I bought an used Macbook about 2 months ago. The very next morning after I loaded all of my files into it, it crashed and I couldn't restart. I kept getting the little file icon with a question mark, which I later learned means that the startup disk couldn't be read or found. I took it to the Apple store and after a very quick look at the machine, got the hard drive replaced. They did all the data migration in-store for me.
Two months later, I am now living in Brazil, and the macbook starts to crash and exhibit the question mark at startup. I run a disk utility diagnosis (it eventually does start up after a couple of hours), and found that the disk needed to be repaired. I took it to an authorized technical support store here, they took 3 days to get back to me and say I had to replace the hard drive yet again. I tried to argue that it made no sense, but they said Apple had issued a recall for that model of HD, so I just let them do it. They wouldn't do the data migration for free, so I did it myself.
I borrowed an external HD, formatted a partition for use with Time Machine, did a full backup of the system before they replaced the internal HD. After I got the Macbook back, I tried to restore the system using Time Machine in the external HD. Problem is, after 3 hours of waiting around with no progress whatsoever, I chose to re-start the process and lost everything. I couldn't even see the MacIntosh HD startup disk. Nothing at all.
Next day, I brought the Macbook to another authorized Apple service store in another city. They took a look and said I just had to install the OS, there was nothing wrong with the disk. Sure enough, I got back home, booted from the OS disk and there it was, Macintosh HD! A disk utility check told me the disk needed to be repaired, I erased it completely and did a clean install of snow leopard. After that, I used the Migration assistant to get all my files, user accounts, and preferences into the Macbook. It seemed to work. This took me all day, yesterday.
By 11pm, the Macbook crashed again (spinning beach ball, not responsive to force quit). I had to shut it down by pressing the power button. Trying to restart, the **** folder with a question mark icon was back.... I couldn't even reboot from the disk image.
This morning, the Macbook start back up as if nothing had happened. I run a "verify disk" for the internal HD, it comes back clean. I verify the permissions, it comes back with several pages or problems, which I tell it to repair. Everything seems fine. However, after about 1 hour of using the computer (for work, mind you), it freezes up again and I can't even force quit anything. I am now wondering if it will crash again in another hour.
What do you think this is? I don't think it is a HD issue. After all, after 3 HDs, it could not possibly be that I always get the bad one in all of those different lots. I am thinking of wiping the hd clean again, installing snow leopard and then just copying the files and apps I need, leaving the users, preferences and all other crap behind. Do you think this will solve it or should I go back to the tech guys and deal with their total lack of customer service?

One additional phenomenon: once the gridlines appear , iTunes becomes very slow, and when I then minimize the iTunes window, the application stops responding completely.
-Jolli

Multiple Failures of iTunes

Hi.
Don't know if anyone has seen anything like this - it's a nightmare. If so, I'm grateful for any help. Hmm, let's see - where do I start...
1. I reinstalled my Vista PC from scratch.
2. After installing iTunes it insisted collecting music from my entire PC. So what do I do
(a) remove all the back-up copies individually from my music library
- there is no option for sorting titles by file location
(b) delete everything and re-import the files from the correct directory
I selected option (b) becasue (a) seemed unreasonable considering I have thousands of songs.
3. I sync'ed my iPod Touch, thinking about it now, probably useless because deleting all music from the library probably emptied the playlists.
4. On the iPod, I noticed that, while all or most of the music was still there, something was wrong with the album art. Looking further, I found cases where, in different views, one song was linked to wrong album art, wrong artist, and pretty much all playlists were completely confused.
5. I restarted the device. No improvement.
6. I reset the device. No improvement.
7. I checked the playlists. As expected empty, but now there were some weird grid lines appearing in the table that definitely don't belong there.
8. I reinstalled iTunes without deinstalling the existing copy - I get the wrong UI language.
9. I removed iTunes and reinstalled it, now getting the right language, but the gridlines still there. With iTunes open, the performance of my PC goes down significantly. A couple of times, the application hung when I tried recreating the playlists.
10. Artwork no longer shows in iTunes.
I gave up - hoping that someone here has some ideas.
Regards,
-Jolli

One additional phenomenon: once the gridlines appear , iTunes becomes very slow, and when I then minimize the iTunes window, the application stops responding completely.
-Jolli

Multiple Failures Related?

Similar Messages

Maybe you are looking for