Multiple Fax numbers

Hi Gurus,
Need to know your opinion on this particular situation and whether it is realistic.
Vendor has 3 FAX numbers.
When PO is outputted and Faxed, it should go on one particular number, if that number is busy or fax machine is not responding, then the PO should be outputted on the 2 nd fax number and machine and so on.
Is this possible?
Regards,
Pankaj

this is not possible.
first thing is that you can maintain multiple fax numbers in a vendor master, but SAP takes only the first one, except you code some own logic in a user exit.
When you create a PO, then the message is determined according to the message determination setup and condition records maintained in your system.
In that moment, just 1 fax number is taken to the message.
after this the message is transferred from the purchasing application to the fax appication.
And only the fax application (transaction SOST) knows if the fax was succesfully sent or not. But the fax application has no option to check any master data for alternative numbers.
the message is in a graphic format, it roughly has the information that the message is to be send by fax using number 12345, no information about a vendor number anymore.

Similar Messages

Multiple Faxes numbers can be configured for a PO

Hi,
I need to know whether we can configure multiple Fax numbers to a PO. If YES, please let me know the steps to configure to a PO.
Many thanks,
Jay

Mani,
Could you please provide the SAP note you referred to in your reply? I am also looking for a standard way to accommodate multiple fax numbers per vendor. Currently contemplating output condition technique by purchasing group/vendor combination to enter multiple output condition records, but realize in the most current release of SAP, you have to supply a 'address number' on the output condition record with medium of 2[fax]....previously, you could enter the fax number directly in the output record. I would like to avoid having to create a address record containing fax number that would then be attached to the output record. Any thoughts?
Many thanks!

Faxing to multiple fax numbers ...it doesn't work, can you help?

Hi,
I need to send one fax to multiple recipients. In the Help section, it says that once I've opened the FAX window, I can open the address book by clicking on the address book icon. That works, but when I click on a group or even just one address I get a beep sound and no results. So it's not letting me. I tried on another Mac and got the same thing. I CAN type in a fax number , but I don't want to sit there and type in all the fax numbers every time. The fax help SAYS I can, but I can't. Does anyone know why this isn't working? Can someone help? Thanks!!!!!!
Karen

Try resetting it. Hold down the Sleep and the Home buttons until the Apple logo displays on the screen. This will not have any effect on your data.

Single Output to Multiple Fax Numbers

Hello
I have a scenario where a single output should be directed to 2 Fax #'s. I tried the standard way in SAP via Fax address management and it had option of entering 2 #;s.
However, only 1 is being sent. Do we have some other ways of doing it? Yes, i don't want to
1) Send manually by selecting and re-send
2) Create/Duplicate the Output and assign the second fax #.
Any other ways are highly appreciated.
Thanks
Ashwini

Hi,
As per standard you can not send output to two different fax numbers at once in creation mode. If you want u can enter manually in change mode which you are not interested.
The only way is with the help of user exit just try to put some code in output program as per your requirement...
Thanks

Multiple Fax Numbers against Customer

Hi Gurus,
Customer has the requirement like if customer Master data has two fax number or more then that how can we generate output for all fax numbers. Like if Billing output gets generated then fax notification should be trigerred to all the fax numbers which is existed in customer master. how can we do that.
Please reply
Thanks in advance
Navi

hi naveen,
create a new rol in you order -- let's say Y1 Partner for 2nd Fax-transmission as a Partner ( in German Ansprechpartner ).
Now you can do a normal message für the ney partner. You can have an access only -as example - with vko.
If the rol is enterd, the message will be found - if the rol y1 is not in the order, there will be no 2nd fax-transmission
in my company i have
- partner for the 2nd quotation
- partner for the 2.ne order
- 2 partners for additional deliverys
- one additional partner for invoice
It seems to be a lot, but the fax or mailreceivers are not the same as the one adress in the main compalies data -- and it works great.
hans

Can I attach multiple phone numbers to my iMessage account?

So here's my predicament:
Any time I go travelling somewhere, I like to buy a local SIM card so that I don't have to pay fees for roaming data. The problem is that whenever I insert a new SIM card, iMessage switches to using my new (temporary) number and disconnects from my old (permanent) number. So any new messages I send will either send from this foreign number, or from my email; either one is inconvenient because it tends to start new threads for others in group messages and such. And people who try to iMessage my permanent phone number end up having it fail and then send it as a text message (which I will not receive until I get home and switch my SIM card back).
Is it possible to have multiple phone numbers connected to an iMessage account? (Without resorting to something drastic like buying more iPhones just to have more active numbers.) It seems like something that should be possible, but I can't figure out how to do it.

No, it isn't possible. But you can give Apple this suggestion here: http://www.apple.com/feedback/iphone.html.

Multiple asset numbers in Single PR/ PO line item

Hello,
If we enter multiple Asset Numbers in single PR/ PO line item then we get following error message while doing GR -
' Entry 7100000256 00001 not in table XACCOUNTING (system error) '
Message no. M7000
For this PO, in account assignment we have selected 'Distribution' as 'Distribution on quantity basis' and 'Partial Inv' as 'Distribute to following row'
In case of procurement of materials like chair, we are procuring few hundred materials and for each chair we are creating one asset number.
Please help to resolve.
Regards,
Milind Dumbre
Edited by: Milind Dumbre on Feb 2, 2011 3:24 PM

Hello,
Check these SAP notes 1386249, 1550451 is relevant for you. These notes are applicable for your system. these notes are non industry specific.
You can try these note , i think your problem may get resolve.
Regards
Mahesh Naik

Sending Multiple Fax/E-mail Recipients at once

I'm a RightFax integrator and am trying to assist a customer that would like to integrate RightFax with Oracle Purchasing.
What we would like to do is provide the user with the ability to transmit one purchase order to multiple fax recipients and/or e-mail recipients at once from the Oracle interface. It was initially thought that this might be able to be accomplished with the RightFax integration module but RightFax only processes the data stream from Oracle and makes no change to its functionality. If Oracle can only fax to one recipient at a time then so can RightFax.
Does anyone know if there's a way to customize Oracle to allow sending to multiple recipients at once or of another add-in product that might offer this functionality?
Please feel free to post replies here or send directly to me at [email protected]
Thanks in advance for any assistance.
Mike Bishop

See the response to your other post

Upload vendor master with multiple phone numbers through LSMW

Hi,
I am trying to upload vendor master data with multiple telephone numbers. I am using BAPI BUS4001 , method SAVEREPLICA . It has allow me add only phone number. Is there any workout to short out this issue?
Thanks in advance.
Regrads,
Suresh Yerra.

Dear All,
the telephone structure in bapi is a table. so append each telephone record to the table for multiple phone numbers.
Thanks,
Suresh Yerra

Multiple automated numbering in the same page

Hi everyone,
I am using InDesign CS4 and am trying to print CD labels with CD numbers on them. Each page has two CD labels on it and I have to serialize them. For example, the first page will have 001 - Disk 1 of 500 and 002 – Disk 2 of 500. The page numbering option can only do one serial number per page. How can I create a multiple automated numbers like that? If InDesign can’t do it, is there any plug-in that can do this?
Thank you for your time.
Teddy

Ok Nearly did it with a Paragraph Style
You will need to convert the numbering to text and GREP Search
Find
^\b(\d\d\s)
Change To
0$1
But it works, you just need 500 paragraph returns
See screen shot
Why is everything queued these days?
Direct link here
http://img26.imageshack.us/img26/8734/67851396.jpg

Contacts with multiple mobile numbers

Hello all,
This is my first post here, so please be patient with me. I searched through previous threads, but did not find an sufficient answer to the problem I am having. To set the stage, I will give you what I am working with
g-mail account with close to 500 contacts
iPhone 5, latest version 6.1.3
MacBook Air, latest version 10.8.3
I have my g-mail account linked to my iPhone as an Exchange connection so that I can view the contacts. I have my computer contacts program connected with Google as well. The problem I am having is that most of these 500 contacts have multiple mobile phone numbers. I am able to create this contact easily in g-mail and can relabel the phone types to match what they are. Let's say for instance:
Name: John Smith
Home: 111-111-1111
Mobile: 222-222-2222
Mobile:333-333-3333
etc.
I have done quite a bit of testing and found that the computer contacts matches up perfectly with whatever I put in there, including multiple mobile numbers. My iPhone on the other hand, does not show the second Mobile number. It will recognize multiple home, work, and pager numbers, but not multiple mobiles (it only shows the first one on the list). Why would it allow multiple numbers of the other types and not mobile numbers?
Is there something I am doing incorrectly, or has Apple overlooked a simple, important function? The things I do not want to do are:
create custom phone labels for my contacts as in mobile1, mobile2 - there are too many and this is an inefficient solution.
change all of the cell numbers to be work numbers - same as above, and what if someone else is updating g-mail contacts and does not follow the rule?
unlink the Google tie I have on the computer - this seems to be the only one of the two that works, and I do not want to have to constantly remember to download an updated contact list. The list changes constantly, and I know I would eventually forget ( I am looking for a poka-yoke here).
Any ideas about solutions?
Thank you for the help

I have no prblem syncing multiple mobile numbers so I don't think it's a universal issue with iOS. The only difference I see is I am using CardDav instead of using the Exchange option. Have you tried it that way? You can urn off contacts in the Exchange account and add the CardDav account separately.

How to update multiple telephone numbers of a customer in ADR2 table?

Can anyone please help on how to update multiple telephone numbers of a customer. Is there a function module available for the same?
Does SD_CUSTOMER_MAINTAIN_ALL Func Mod. update only the default telephone number in adr2?

Hi,
check this link
link:[Customer tel number change.;
hope u'll get some idea.
Regards,
Sneha.

Is it possible One Vendor Code assing to Multiple TIN numbers

Hi Team,
We have vendor where we need to assing Multiple TIN numbers in Vendor master based on the plan location from where vendor supplying the goods
Same time I need to track with TIN number wise details in future
Regrds,
Anil

Hi Anil,
Exactly we are looking to update but can you please help me with more detailded way
For particular state you have to assign 1 TIN no
Ex:
Hyd, 1 TIN No
Ban 1 TIN No
Mumb 1 IN No etc.,
Taking above example how(where) we are going to assign in Vendor Master data and One vendor is supply material from different states how excise report takes in system
Thank you
Anil

Handle multiple material numbers as import parameter in a function module

Hello Folks,
I want to handle multiple material numbers as import parameters.. I have tried using table types but having problem while reading the data....
My requirement is user will input say 10 materials , now i need to get all the information for that particular material ..
I am unable to use for all entries as it is saying that it is not internal table... I have found table types which is having sigon , option, low and high fields but user doesn't want it... He wants to enter only materials... Currently am using this MD_T_MATNR(table type)
I am stuck up here..
Appreciate any kind of help.
Regards,
Raj

Hi,
it looks like you are on a good way, just something little is missing. Type MD_T_MATNR is suitable for your issue. I have tried it and probably your problem is that You have to use
SELECT ... FOR ALL ENTRIES IN it_matnr WHERE mara~matnr EQ it_matnr~table_line.
instead of
SELECT ... FOR ALL ENTRIES IN it_matnr WHERE mara~matnr EQ it_matnr~matnr.
In this example I suppose that a name of your variable of type MD_T_MATNR is it_matnr. Problem is that table line is not structure, but data element, therefore You have to use ~table_line instead of ~matnr.
Hope it helps.
Adrian

CATS: Creation of SES through TX-CATM with multiple personnel numbers

Hi Gurus,
We need to create through CATM SES for multiple personnel numbers.
We need also to be able entering hours for multiple personnel through CAT2. Tried using settings u201Center for several personnel nosu201D and u201Cselect via personnel listu201D but did not work .
Any idea how to accomplish both requirements?
Thanks,
VL

Hello,
Please let us know the Error Log or ERROR Message for this Issue when you carry out this CAT2
Also Please check this SPRO
Cross-Application Components>Time Sheet>Specific Settings for CATS notebook-->Set up data entry profiles
In Persnol selection Tab
Enter for Several Personnel Numbers & Select Via Pers. List Check Box Should be Marked.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Oct 14, 2010 9:58 AM

Multiple Fax numbers

Similar Messages

Maybe you are looking for