Multiple Faxes numbers can be configured for a PO

Hi,
I need to know whether we can configure multiple Fax numbers to a PO. If YES, please let me know the steps to configure to a PO.
Many thanks,
Jay

Mani,
Could you please provide the SAP note you referred to in your reply?  I am also looking for a standard way to accommodate multiple fax numbers per vendor.  Currently contemplating output condition technique by purchasing group/vendor combination to enter multiple output condition records, but realize in the most current release of SAP, you have to supply a 'address number' on the output condition record with medium of 2[fax]....previously, you could enter the fax number directly in the output record.  I would like to avoid having to create a address record containing fax number that would then be attached to the output record.  Any thoughts?
Many thanks!

Similar Messages

  • Multiple Fax numbers

    Hi Gurus,
    Need to know your opinion on this particular situation and whether it is realistic.
    Vendor has 3 FAX numbers.
    When PO is outputted and Faxed, it should go on one particular number, if that number is busy or fax machine is not responding, then the PO should be outputted on the 2 nd fax number and machine and so on.
    Is this possible?
    Regards,
    Pankaj

    this is not possible.
    first thing is that you can maintain multiple fax numbers in a vendor master, but SAP takes only the first one, except you code some own logic in a user exit.
    When you create a PO, then the message is determined according to the message determination setup and condition records maintained in your system. 
    In that moment, just 1 fax number is taken to the message.
    after this the message is transferred from the purchasing application  to the fax appication.
    And only the fax application (transaction SOST) knows if the fax was succesfully sent or not. But the fax application has no option to check any master data for alternative numbers.
    the message is in a graphic format, it roughly has the information that the message is to be send by fax using number 12345, no information about a vendor number anymore.

  • Faxing to multiple fax numbers ...it doesn't work, can you help?

    Hi,
    I need to send one fax to multiple recipients. In the Help section, it says that once I've opened the FAX window, I can open the address book by clicking on the address book icon. That works, but when I click on a group or even just one address I get a beep sound and no results. So it's not letting me. I tried on another Mac and got the same thing. I CAN type in a fax number , but I don't want to sit there and type in all the fax numbers every time. The fax help SAYS I can, but I can't. Does anyone know why this isn't working? Can someone help? Thanks!!!!!!
    Karen

    Try resetting it. Hold down the Sleep and the Home buttons until the Apple logo displays on the screen.  This will not have any effect on your data.

  • Multiple Fax Numbers against Customer

    Hi Gurus,
    Customer has the requirement like if customer Master data has two fax number or more then that how can we generate output for all fax numbers. Like if Billing output gets generated then fax notification should be trigerred to all the fax numbers which is existed in customer master. how can we do that.
    Please reply
    Thanks in advance
    Navi

    hi naveen,
    create a new rol in you order -- let's say Y1 Partner for 2nd Fax-transmission as a Partner ( in German Ansprechpartner ).
    Now you can do a normal message für the ney partner. You can have an access only -as example - with vko.
    If the rol is enterd, the message will be found - if the rol y1 is not in the order, there will be no 2nd fax-transmission
    in my company i have
      - partner for the 2nd quotation
      - partner for the 2.ne order
      - 2 partners for additional deliverys
      - one additional partner for invoice
    It seems to be a lot, but the fax or mailreceivers are not the same as the one adress in the main compalies data -- and it works great.
    hans

  • Single Output to Multiple Fax Numbers

    Hello
            I have a scenario where a single output should be directed to 2 Fax #'s. I tried the standard way in SAP via Fax address management and it had option of entering 2 #;s.
    However, only 1 is being sent. Do we have some other ways of doing it? Yes, i don't want to
    1) Send manually by selecting and re-send
    2) Create/Duplicate the Output and assign the second fax #.
    Any other ways are highly appreciated.
    Thanks
    Ashwini

    Hi,
    As per standard you can not send output to two different fax numbers at once in creation mode. If you want u can enter manually in change mode which you are not interested.
    The only way is with the help of user exit just try to put some code in output program as per your requirement...
    Thanks

  • Hp lj1102w - can't configure for Wifi (HTML Config not working in printer utility)

    I've got an HP LJ 1102w and have never been able to get the Print Utility to work.  I had to set it up for WiFi with a Windows machine, which wasn't too bad, but the network just changed and I don't have the Windows machine available any more.   I've looked at numerous discussions but can't find the right solution.    I've downloaded the driver a number of times , then went to the configuration page for the printer, clicked Utility, but when I click "Open Printer Utility", nothing happens.   Any ideas?
    Thank you!  Ron

    Thank you for the article, HerelsMartin, but that still didn't change anything.  To summarize, I did all of this:
    - Deleted old printer from the MacBook
    - Reset the printer, confirmed old network was gone
    - Set up Java 8.latest, 64-bit, made sure Chrome was updated
    - Set Safari as default browser
    - Rebooted computer just for kicks
    - Went to the new printer, clicked Options, Printer Utility , and got the same result: the "Ok" button got highlighted momentarily and then nothing happened.
    I then tried this step at the bottom of the article (see my comments in [..]):
    On the Apple menu bar, click Go [there was no "Go" in the Apple bar so I did this through Finder], computer, MAC harddrive, Library, Printers, HP [there was no HP folder, just my 4 printers], LaserJet, click on folder for your printer [there was no folder so I double-clicked the printer and it brought me back to the Printer Utility, and I got the same result as above - nothing - so the rest of this doesn't apply], click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings."
    I'm used to Mac doing EVERYTHING for me but this has been extremely time-consuming and frustrating; I'm ready to just go buy another printer.  There must be something that can fix this??
    Thank you, r

  • Multiple Apache-Weblogic plug-in configurations for the same host

              Hi BEA,
              I have a situation where I have more than one weblogic server/cluster both using
              the same Apache to proxy. Reading the Apache plug-in configuration I gather that
              below should work. In Apache (httpd.conf):
              <Location /path1>
              SetHandler weblogic-handler
              WeblogicHost app1
              WeblogicPort 7001
              </Location>
              <Location /path2>
              SetHandler weblogic-handler
              WeblogicHost app2
              WeblogicPort 7001
              </Location>
              In this case the later Location of the two works fine and the other seems like
              it is just not there. (If the two are switched the other works fine...) The thing
              is that, if possible, I would like to avoid splitting the two locations onto two
              different VirtualHosts (which works).
              Does anyone have any ideas on how to solve this and still avoid the use of multiple
              VirtualHost-definitions?
              Is it due to a limitation in Apache module architecture that the configuration
              above does not work or is it a design choice in the plug-in?
              //GG
              

              Gunnar,
              I would post this Apache proxy plug in question to the
              weblogic.developer.interest.plug-in forum
              Chuck Nelson
              DRE
              BEA Technical Support
              

  • UC500 Can't Configure for PPPoE

    I am just starting out and have a UC500 to learn on. I am trying to connect to my ISP using PPPoE through an Alcatel Speedtouch Home DSL modem in relay mode, but when I try to configure the UC500 from the GUI ...the PPPoE settings are greyed out. Can you point me in the right direction?
    --Thomas

    I may have found it in the release notes ...
    • CSCsj92778
    Symptom After the WAN interface on the Modify Internet Connection dialog is disabled and reenabled, the PPPoE check box becomes enabled again even though a firewall configuration is present. Because of this problem, Cisco Configuration Assistant disables the PPPoE check box if it detects a FW/NAT configuration under FA0/0.
    Conditions None.
    Workaround To configure PPPoE, you must first delete the current FW/NAT configuration, then configure PPPoE, and finally reconfigure FW/NAT by choosing dialer0 as the outside interface.

  • SSL and Credentials configuration for webas

    Hi..
    I got a doubt in SSL certificate configuration.When i need to configure a JAVA engine for activating SSL.I would create .CSR and get signed from Trust center which inturn gives three certificate root,intermediate and original certificate and so we can configure the JAVA URL as https://<hostname>:<port no>:500001/...
    Now the same can also can be configured for ABAP WEBAS engine.my doubt is as per note : 510007,SAP has said to generate .PSE file and SSL configuration which will work in 443 port and HTTPS port as in SMICM transaction
    But I have two instances running on single host.I have already configured HTTPS 443 for one instance say for ABAP webas.And If i need to configure for another instance, <b><u>can i change the HTTPS port as per my requirement ????,</u></b>because 443 has been assigned to another instance (earlier) .And <b><u>Can i generate PSE file from that new port and get the certificate installed that is obtained from Trust center ???</u></b>
    Expecting you Ideas and solution for this scenario..
    Thanks
    Gopalakrishnan M

    Hello Gopalakrishnan,
    To specify the https port of ABAP, you can use paramenter
    icm/server_port_<X> as PROT=HTTPS,PORT=<port>
    I think the default port for http is like below
    icm/server_port_0 as PROT=HTTP,PORT=80<instance_number>
    Then you can just specify icm/server_port_1 for https.
    Good luck,
    Victor

  • Please help : How can I upload Multiple Telephone numbers for BP

    Hi
    Iam  Uploading Business Partner Master data of Type Person and Organization with the Below Approach
    LSMW - IDOC METHOD (Messagetype -CRMXIF_PARTNER_SAVE_M, Basic type - CRMXIF_PARTNER_SAVE_M02)
    XIF ADAPTER
    DATA TRANSFER WORKBECH (SXDA)
    with Below Flat File Structure
    1) IDNUMBER
    2)LAST NAME
    3)COUNTRY
    4)TELEPHONE1
    5)TELEPHONE2
    6)TELEPHONE3
    7)TELEPHONE4
    8)EMAIL etc.,
    When we are Uploading the data, the First Telephone number(TELEPHONE1) and the remaining data is uploading successfully except the 3 Telephone Fields
    ( TELEPHONE2,TELEPHONE3,TELEPHONE4)
    We are facing trouble in uploading Multiple Telephone numbers and I created BP Master data with Multiple telephone numbers through SAPGUI.
    Please help, as I am not sure about the procedure of uploading multiple telephone numbers using LSMW Method
    I tried some programming on CONSNUMBER Field (in Maintain field mapping and conversion rules) still I am unable to upload
    Looking for Help.
    Warm regards
    BMS

    Hi vijay
    I am using the below target structures
    E102BUS_EI_COMMUNICATION   External Interface: Communication Types
    E102BUS_EI_TEL_DATA    External Interface: Communication Data Telephone
    E102BUS_EI_BUPA_TELEPHONE   External Interface: Data for Telephone
    E102S_EI_BUPA_TELEPHONE_CON    External Interface: Data for Creating a Telephone Number
    E102BUS_EI_STRUC_TEL_DATA   External Interface: Structure TEL_DATA
    among the above structures
    I am assigning 'M' to target structure field
    E102S_EI_BUPA_TELEPHONE_CON-TASK = 'M'.
    and for E102BUS_EI_STRUC_TEL_DATA   I am using the fields
    country,std_no,Telephone, in the same structure there is field called CONSNUMBER (I came to know that to upload multiple telephone numbers we have to do some programming on this field, pls correct me if I am wrong)
    and there is no other structures for holding telephone numbers

  • How to have Multiple Configurations for a Flex Application

    Hi All,
    I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
    How can something like this be achieved in FLEX?
    Many thanks!
    -Mike

    Maybe my setup is unconventional, I doubt it, though:
    1) SVN repo stores FLEX and PHP codebases in separate projects.
    2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
    3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
    4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
    Now, using ANT, the scenario would look like this:
    1) SVN repo stores FLEX and PHP codebases in separate projects.
    2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
    3) Code is good and developer checks it back into SVN.
    4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
    I am using PHPUnderControl as my build server for PHP.
    I am also unclear as to how my goal could be achieved using ANT?
    Thanks!
    Mike

  • Can I attach multiple phone numbers to my iMessage account?

    So here's my predicament:
    Any time I go travelling somewhere, I like to buy a local SIM card so that I don't have to pay fees for roaming data. The problem is that whenever I insert a new SIM card, iMessage switches to using my new (temporary) number and disconnects from my old (permanent) number. So any new messages I send will either send from this foreign number, or from my email; either one is inconvenient because it tends to start new threads for others in group messages and such. And people who try to iMessage my permanent phone number end up having it fail and then send it as a text message (which I will not receive until I get home and switch my SIM card back).
    Is it possible to have multiple phone numbers connected to an iMessage account? (Without resorting to something drastic like buying more iPhones just to have more active numbers.) It seems like something that should be possible, but I can't figure out how to do it.

    No, it isn't possible.  But you can give Apple this suggestion here: http://www.apple.com/feedback/iphone.html.

  • How can I list all the domains configured for Weblogic Servers?

    How can I list all the domains configured for Weblogic Servers?
    I saw a note, which says the following:
    "WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
    In my case, I just want to list all the domains, is that possible by using any scripts?
    Thanks
    AJ

    If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
    <MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
    Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

  • Multiple Phone numbers for Multiple addresses

    Hi Folks,
    We have a requirement to build a solution for the following :
    Every Business partner may have multiple addresses, and each address may have multiple phone numbers !!
    We already have a qualified lookup table to house the multiple addresses but we are stuck at accomdating multiple phone number to each of the addresses !!
    Any smart ideas !!?
    Regards,
    Vinay

    Hi Vinay,
    I got your point .But I guess you are talking about a lookUp Qualified inside a lookup Qualified table which I believe  is not possible.But u can nest a lookup Flat table inside a qualified Table.
    To your problem I have a different solution.
    Let suppose Master record is as shown below:
    Id | Name | Home_Add | Business_ADD | Landline | Mobile.
    1 | abc | 123 | - | 078821 | 93709.
    1 | abc | - | 345 | 080145 | 98932.
    Here customer 'abc' have Multiple address like Home address and Business address.And each address has multiple phone numbers like Landline and Mobile.
    In this case if you design repository as;
    Main Table: ID,Name,Addres_Type
    where Address_Type is a LookUp Quaified Field (multivalued)
    Qualified Table:Address Type(Non-Qualifier),Landline(Qualifier)and Mobile(Qualifier),Address(Qualifier).
    Address Type is a Flat LookUp Table with values Home address and Business Address.
    After You Import in Data Manger your record will look like:
    Id | Name | Address Type
    1 | abc |Home Address;Business Address.
    and when you see in Record detail pane for Address Type
    you will find values like
    Address Type: Home Address.
    Landline : 078821
    Mobile : 93709.
    Address :123
    Address Type: Business Address.
    Landline : 080145
    Mobile : 98932
    Address :345
    Hope this will help to solve your problem.If any further qury then do post to me.
    Reward points if helpful.
    Regards,
    Neethu.

  • Fax configuration for PO printing...

    hi,
    how to configure the FAX for PO printing....plz suggest me the corresponding tcodes and how to proceed with...i am using ME9f for Po printing...
    thanks
    jaideep

    In scot we are linking fax machine to sap.
    In  nace we are making setting for condition type as well as we can create condition record.
    again u have to do configuration for output determination.
    User parameter u have to check for use of fax machine.

Maybe you are looking for