Multiple file copies

Before I buy Lightroom, I want to know if it will help me fix an issue I have.
I've copied my Nikon D70 and D200 RAW files to multiple locations (C:\folder, C:\other folder, C;\other folder\subfolder, E:\yet another location, E:\this is dumb Fred) on one server while trying to consolidate hard drives and not over write files!
This has created multiple duplicates and I don't want to loose any file that may have the same name at the OS level.
I understand that Lightroom uses a data base to keep information about files and you can use this "off line"
Can I map the server drives to my laptop, import the mapped drives into Lightroom and then go thru them disconnected?
If I delete a file in Lightroom, does the actual deletion from the drive happen when the drives are "on line" again? Can I see "thumbnails" for the pictures during the "Off line"
Thanks for your help, I couldn't find the answer in the FAQ

Why not use the command to import into a new place, and keep "Don't import duplicate" in force? Then when you have brought everything in, you can delete all your copies, and then make a fresh back up.
You can see the thumbs and 1:1 previews when the images are offline. As to deleting files you marked when offline, when you are online again, I am not sure but I think you have to select the photo and then hit Delete. Probably easier to mark with an x when offline.

Similar Messages

Multiple file copies just randomly miss a few of the files

This is something that has happened to me on all networks I've used. My home network (gigabit LAN or 802.11n), work network, and any client network I've ever been on while supporting.
I can select say 10 files on my MBP in finder. And either copy/paste or just drag to copy onto an SMB share (windows 2003 at home for my windows home server, also 2008 and 2008 R2 servers at work and clients). And the file copy goes fine. I see the progress window, it goes and I see the files populating the network share as it progresses. It runs the normal amount of time I'd expect for the speed of the network, and when it's done I get my sound. Then anywhere from three to nine of the files just disappear off the network share as the copy finishes. So it takes the time to copy them but does not complete.
And it's not an every time thing. And it ONLY happens with multiple files, i NEVER have a problem doing files singularly. The same files that fail in a batch go fine when I copy them one by one in the same session after it failed doing them all at once.
No errors on the windows side of things in the logs, disks are fine. Never happens with my MBP when I do it from windows either via VMware or booting directly into boot camp.
No errors on the mac side, for all intents and purposes it completed successfully. Yet almost every time I do group copies, only a couple actually are on that network share when all is said and done.
No AV or firewall on the server at the moment so it happens whether I have them enabled or uninstalled. No AV on the MBP.
And no disconnects, etc. I'm watching things in an RDP session while the copy is happening and I never lose the network, it never drops. Downloads that I sometimes have going on are working just fine, everything is just perfect in every respect as far as networking goes, except for those copying of multiple files.
Saw someone else had disabled write caching on the windows machine to overcome an actual error they had, and i had tried that in this instance long ago to no avail.
This has happened since I first bought the laptop in July of '09 and it was running leopard, and has continued through every single version update since. Wired or wireless...
Thanks for any suggestions.

hey JDThree, i'm having the SAME EXACT PROBLEM!!! i've tried restarting both my server and my MBP, and it does the job a bit, but it's so random. even doing a single file copy doesn't seem to work. i tried copying over one file, then when it finished and was on the server, i copied the next file, and it removed the first file. so strange. anybody have any ideas?

Multiple file formats and stacking

Like many on this forum I need to keep track of the original RAW and other formats of the same file. This is for several reasons:
1. I have a large number of already converted RAW files into JPG and TIFF files, which I want to manage in the LR library.
2. As I go forward in time, I want to keep my RAW files, with the associated metadata edits and an exported JPG or TIFF copy, which is used by other programs and sent to others on short notice. I want the LR library to manage these as well. I do not want to have to go through an LR export process every time I want to use a JPG or TIFF in another application.
At present, if I rename the JPG and TIFF files (ie filename_LR.JPG) then I can import them into the same folder. However, the auto-stack feature does not work for a capture time between stacks of zero seconds, even though the capture time is the same. The program logic appears to be (greater than 0) where it should be (greater than or equals 0). If I set the capture time between stacks to 1 second then I get multiple different photos in the stack when there is less than 1 second between captures.
LR team - please give this some thought. I am confident you can come up with an elegant solution to the multiple file copies in the same or diferent formats, and a grouping mechanism, preferably in addition to the stacking feature (the stacking feature appears to really be meant to group similar photos). This feature should work in conjunction with import. The grouping of multiple file versions at the same capture time should also work across folders, so that LR does not impose upon existing file management structures.
Thanks
Rory

It is fine to post such here, but also try the official suggestion route at
Adobe - Contact Us and submit a Comment.
This is U2U forum, so you will get discussion, but they may otherwise get to see it that way.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/

SQL Loader to Load Multiple Tables from Multiple Files

Hi
I wish to create a control file to load multiple tables from multiple files
viz.Emp.dat into emp table and Dept.dat into Dept table and so on
How could I do it?
Can I create a control file like this:
OPTIONS(DIRECT=TRUE,
SKIP_UNUSABLE_INDEXES=TRUE,
SKIP_INDEX_MAINTENANCE=TRUE)
UNRECOVERABLE
LOAD DATA
INFILE 'EMP.dat'
INFILE 'DEPT.dat'
INTO TABLE emp TRUNCATE
FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"'
(empno,
ename,
deptno)
INTO TABLE dept TRUNCATE
FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"'
(deptno,
dname,
dloc)
Appreciate a Quick Reply
mailto:[email protected]

Which operating system? ("Command Prompt" sounds like Windows)
UNIX/Linux: a shell script with multiple calls to sqlldr run in the background with "&" (and possibly nohup)
Windows: A batch file using "start" to launch multiple copies of sqlldr.
http://www.pctools.com/forum/showthread.php?42285-background-a-process-in-batch-%28W2K%29
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/start.mspx?mfr=true
Edited by: Brian Bontrager on May 31, 2013 4:04 PM

Acrobat Standard 9.0 automatically opens multiple files on startup

This problem was originally posted as "Acrobat Standard 9.1.2 update problem?"
In Vista Ultimate, I installed the Acrobat Standard 9.1.2 update, and afterward, my terminal began automatically opening multiple PDF files whenever Acrobat was started. At one point, I let it run for several minutes, and got up to 33 opened files before I forced the program to shut down.
Although this problem was resolved by a program removal and reinstallation (restore previous version didn't work), it came back again, after I had worked on several PDF files since the reinstall. Apparently, Acrobat feels compelled to open all of the PDF files I have worked on since the reinstallation, whenever it starts up. In addition, it opens copies of all of these files when I open a Website PDF file. So I have two copies of the same filename open at the same time (usually impossible in Windows). Since I removed v9.1.2 and reinstalled v9.0, the problem might not be connected to the 9.1.2 update I installed before it began; however, the 9.1.2 update might have made changes to the registry that the uninstall didn't correct.
HAS ANYONE ELSE EXPERIENCED AUTOMATIC MULTIPLE FILE OPENINGS IN ACROBAT STANDARD 9.0 OR 9.1.2, AND IF SO, WHAT DID YOU DO ABOUT IT? I'm desperate enough to seek technical advice from a random group of strangers.

I was having this problem on a Vista Ultimate machine after upgrading to Acrobat Pro 9.2, and solved it in the following way.
1. Exit Acrobat, open the task manager and be sure the acrobat.exe task is no longer running.
2. Open the directory C:\Users\<username>\AppData\LocalLow\Adobe\Acrobat\9.0
3. Locate the file named Organizer90 and drag it to the desktop
4. Open Acrobat from the Start menu
Problem should be solved! If not, exit Acrobat and drag the original Organizer90 file back to the original directory (replacing the newly created file). I have no idea what the Organizer90 file does, so I don't know if you may be losing anything important using this method, but it did work for me in solving the "opening multiple files" problem.

Process Multiple Files in Photoshop Elements 4.0.

Please Help,
I have a lot to learn about digital photos and when I retire I will have time. However, I have 4000+ digital photos at 900.0 plus KB (approximate 42.66x32 72ppi) each. Now I discover they take up lots of room (my backup is huge) and need to be resized to properly email. I figure I will resize them all at the same time. I found process multiple files via the file drop down menu > Process Multiple Files by selecting one photo and opening Standard Edit. I then selected Folder in the process files from drop down menu, found my, large, digital photo folder via the browse button, checked include all subfolders, destination same as source, and quit at image size.
Am I on the right track? What is a reasonable image size? PSE uses width, hight, and resolution which is confusing when everyone else talks about file size. I found the PSE help information difficult to understand. I want to do this right the first time and would appreciate your suggestions.
I will change the settings on my Pentax Optio W30 Camera; after I get some help regarding the size issue, so my future photos will be easier to manage.
Thanks

Your images are already smaller than expected. The Pentax Optio W30 is a 7 mega pixel camera, which will produce images of about 3+ MB, when set to highest quality.
It is recommended to shoot at the highest possible quality, keep those images as "originals" and make copies for other purposes, such as email attachments.
If you are planning to resize and overwrite your originals, you will cause serious quality deterioration.
My suggestion is that you 1) set your camera to the highest quality and 2) get an exterior hard drive for storage.
Juergen

Applying security to multiple files

I am using Acrobat X and have multiple files that I must apply/change security settings for. Is there a way to do this without having to go into every file and do them one by one? I appreciate the help.

To create a new action, select: Tools > Action Wizard > Create New Action
For the Steps section, select "Protection > Encrypt" from the left panel and then select the Options button and select "Password Security" as the security method. You'll then be able to set the various options you want. Save the action and you can run it on a folder of documents. Be sure to work with copies of your files. More information about working with Actions is in the Acrobat help doc, but post again if you get stuck.

Packaging and Collecting Multiple files

Hi,
Does anyone know of a quick way to collect multiple files for artwork.
I have 60 individual fact sheets that I need to send to print, doing each individually will drive me mental!
Ta
Jim

Hi, sorry, I'm a bit technology-illiterate, and I replied to this post because it looked the most relevant to what I was hoping to accomplish.
I don't have InDesign, so I guess I'm in the wrong forum, but any help ANYONE can provide would be appreciated.
I do apologize for not posting in the right place, but frankly the help page for Adobe Reader 9 (which is what I have) had absolutely no answers to my question.
Basically, the task at hand is to create a coherent, single PDF file, if possible, from 33 images that I have. These images are copies of pages from a primary source document found via the Library of Congress. When I hit the "save image" button on the website, that is the format that they downloaded in.
My OS is Windows Vista. I know that I have, at some point in time, managed to jury-rig a PDF from multiple files before, but I can't remember how on earth I did it the first time because I came about it by accident.
I'll understand if it's impossible to make a PDF out of the files the way that they're currently formated, and I do appreciate your timely response.
Thanks so much for trying to help, and please let me know if you can think of anything I can do (without paying to download a program - I'm way too poor for that)

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

Ability to view multiple files in ONE window

I can see here that this is not a new topic really but the thing with Acrobat 9 is so frustrating that it is just unbelievable.
This is another pearl:
Acrobat 9 "lost" its predecessors ability to view multiple files in ONE window. After opening four only documents I cannot see anything on the screen because the toolbars on each individual window cover all necessary view and nothing is left for the actual document. And sometimes I need to open 20 documents!
This is ABSOLUTE DISASTER!!!
I found some explanations from Adobe on the Web that are more than a year old.
I was sure that by now this unfortunate mishandling of that feature (apparently it was dropped out from A9 deliberately - WHO'S IDEA WAS THAT?) would be somehow restorable.
Would anyone happen to know if this feature can get restored to how it was working in A7 or 8 (without the need to uninstall A9 and install A8)?

No, it can't be restored, unless Adobe decides to change the way Acrobat works (which is possible, but not likely).
By the way, it was Microsoft's idea... Adobe were just following their example on this.
You can make a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Upload multiple files WITH correct pairs of form fields into Database

In my form page, I would like to allow 3 files upload and 3 corresponding text fields, so that the filename and text description can be saved in database table in correct pair. Like this:
INSERT INTO table1 (filename,desc) VALUES('photo1.jpg','happy day');
INSERT INTO table1 (filename,desc) VALUES('photo2.jpg','fire camp');
INSERT INTO table1 (filename,desc) VALUES('photo3.jpg','christmas night');
However, using the commons fileupload, http://commons.apache.org/fileupload/, I don't know how to reconstruct my codes so that I can acheieve this result.
if(item.isFormField()){
}else{
}I seems to be restricted from this structure.
The jsp form page
<input type="text" name="description1" value="" />
<input type="file" name="sourcefile" value="" />
<input type="text" name="description2" value="" />
<input type="file" name="sourcefile" value="" />The Servlet file
package Upload;
import sql.*;
import user.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.Map;
import java.util.HashMap;
import java.util.Date;
import java.util.List;
import java.util.Iterator;
import java.io.File;
import java.io.PrintWriter;
import java.io.IOException;
import java.text.SimpleDateFormat;
import org.apache.commons.fileupload.servlet.ServletFileUpload;
import org.apache.commons.fileupload.disk.DiskFileItemFactory;
import org.apache.commons.fileupload.*;
public class UploadFile extends HttpServlet {
private String fs;
private String category = null;
private String realpath = null;
public String imagepath = null;
public PrintWriter out;
private Map<String, String> formfield = new HashMap<String, String>();
//Initialize global variables
public void init(ServletConfig config, ServletContext context) throws ServletException {
    super.init(config);
//Process the HTTP Post request
public void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException {
    request.setCharacterEncoding("utf-8");
    response.setCharacterEncoding("utf-8");
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    Thumbnail thumb = new Thumbnail();
    fs = System.getProperty("file.separator");
    this.SetImagePath();
     boolean isMultipart = ServletFileUpload.isMultipartContent(request);
     if(!isMultipart){
      out.print("not multiple part.");
     }else{
         FileItemFactory factory = new DiskFileItemFactory();
         ServletFileUpload upload = new ServletFileUpload(factory);
         List items = null;
         try{
            items = upload.parseRequest(request);
         } catch (FileUploadException e) {
            e.printStackTrace();
         Iterator itr = items.iterator();
         while (itr.hasNext()) {
           FileItem item = (FileItem) itr.next();
           if(item.isFormField()){
              String formvalue = new String(item.getString().getBytes("ISO-8859-1"), "utf-8");
              formfield.put(item.getFieldName(),formvalue);
              out.println("Normal Form Field, ParaName:" + item.getFieldName() + ", ParaValue: " + formvalue + "<br/>");
           }else{
             String itemName = item.getName();
             String filename = GetTodayDate() + "-" + itemName;
             try{
               new File(this.imagepath + formfield.get("category")).mkdirs();
               new File(this.imagepath + formfield.get("category")+fs+"thumbnails").mkdirs();
               //Save the file to the destination path
               File savedFile = new File(this.imagepath + formfield.get("category") + fs + filename);
               item.write(savedFile);
               thumb.Process(this.imagepath + formfield.get("category") +fs+ filename,this.imagepath + formfield.get("category") +fs+ "thumbnails" +fs+ filename, 25, 100);
               DBConnection db = new DBConnection();
               String sql = "SELECT id from category where name = '"+formfield.get("category")+"'";
               db.SelectQuery(sql);
                while(db.rs.next()){
                  int cat_id = db.rs.getInt("id");
                  sql = "INSERT INTO file (cat_id,filename,description) VALUES ("+cat_id+",'"+filename+"','"+formfield.get("description")+"')";
                  out.println(sql);
                  db.RunQuery(sql);
             } catch (Exception e){
                e.printStackTrace();
        HttpSession session = request.getSession();
        UserData k = (UserData)session.getAttribute("userdata");
        k.setMessage("File Upload successfully");
        response.sendRedirect("./Upload.jsp");
//Get today date, it is a test, actually the current date can be retrieved from SQL
public String GetTodayDate(){
    SimpleDateFormat format = new SimpleDateFormat("yyyyMMdd");
    String today = format.format(new Date());
    return today;
//Set the current RealPath which the file calls for this file
public void SetRealPath(){
    this.realpath = getServletConfig().getServletContext().getRealPath("/");
public void SetImagePath(){
    this.SetRealPath();
    this.imagepath = this.realpath + "images" +fs;
}Can anyone give me some code suggestion? Thx.

When one hits the submit button - I then get a 404 page error.What is the apaches(?) error log saying? Mostly you get very useful information when looking into the error log!
In any case you may look at how you are Uploading Multiple Files with mod_plsql.

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

Flash Player on Android, select multiple files

We have a web app that uses a flash uploader and it works on Android phones and tablets but it will not let us select multiple files on these devices. Is this possible or is there a trick to get these devices to allow us to select more than one file at a time?
Thank you,
Keith

Flash Player for Android is no longer available. For more information, see here:
http://blogs.adobe.com/flashplayer/2012/06/flash-player-and-android-up date.html
Android users can still download and install Flash Player from the Archived Flash Player Versions page on the Adobe website.
Please refer : http://forums.adobe.com/thread/1061194
Please see this page for a list of all certified devices:Flash Player Certified Devices

How do you select multiple files on a macbook pro?

Can anyone tell me how to select multiple files at one time? I am so frustrated with the way macbook pro works that I really regret buying it. I hate that you can't select multiple files, and that my contact stuff keeps changing. It is certainly not like I was told...that I would never want to use a PC again. I would not buy another apple computer. I spent a lot of money to NOT be able to do things that I have always done with ease. Every time I think I have something figured out, it doesn't work the next time I go to use it in another program. If anyone has an answer to this, I would sure appreciate it.
And all of these so called wonderful updates to the operating system on all mac products have left me frustrated and liking my apple products far less than I did before. On my iphone I had to make the texts just huge to even be able to see the white writing on a blue background. Not sure who made these designs, but from my perspective, I can tell you they certainly weren't thinking about being user friendly in any way when they did it. So disappointed in all of my devices! I do not enjoy using my computer, ipad, or iphone even close to what I did before.

This is some information on the Finder.
http://support.apple.com/kb/ht2470
To select multiple files you can use the shift key with the mouse if they are in a contiguous list or the CMD key with the mouse if you have breaks in that list. You can also use the mouse to drag over the files you want to select.
The Macs are easy to use, I have used many versions of Windows, Linux and other operating systems and I find OS X is far the easiest, but that is me.
There are many instructional videos and texts on Apples web site and if you are near to an Apple store they do classes to help.
Hope you get used to it.

Running multiple files

Hello
I am trying to run multiple files with my java app on a Unix server. I compiled with javac, and run it thus:
java SNL *.mef
meaning I want to run all of the files with .mef suffix. Unfortunately it does nothing. If I just run one file at time this way:
java SNL bach.mef
it will work just fine. My main method looks like this:
public static void main(String[] args) throws IOException {
if (args.length != 1) {
System.exit(-1);
} else {
File file = new File(args[0]);
SNL parseSNL = new SNL(file);
Any help would be greatly appreciated.
JM

public static void main(String[] args) throws IOException {
if (args.length != 1) {
    System.err.println( "Usage: java SNL x.mef y.mef ..." );
    System.exit(-1);
} else {
    for( int i=0; i<args.length; i++ ) {
      File file = new File( args[i] );
      System.out.println( "Parsing " + file.getAbsolutePath() + " ..." );
      SNL parseSNL = new SNL(file);

Multiple file copies

Similar Messages

Maybe you are looking for