Multiple files to single using bpm

Hi,
Scenarion : 6 files to 1 file using BPM
( 6 files are generated from the tool in a folder )
Files
abc1xyz_20101210.txt
abc2xyz_20101210.txt
abc3xyz_20101210.txt
abc4xyz_20101210.txt
abc5xyz_20101210.txt
abc6xyz_20101210.txt
Conditions
1) Sender File Adapter needs to pick the files when all the files are generated .
2) Should not pick the duplicate files
(eg : abc1xyz_20101210.txt
abc2xyz_20101210.txt
abc1xyz_20101211.txt
abc1xyz was repeated 2 times , ignore the file before file is picked.
ponints will be awarded
Thanks

Hi,
I prefer these kind of check can be easily done by the sender system or tool while generating those files itself..
that is during the generation of file if the file already exists then overwrite the content or delete the existing file and create new file...
other option can be..using OS scripts to validate the file name till 4 characters..read the file name and take first four chars and compare it with the all other files...
I cannot provide the exact code but check with some scripting guys..I think the above logic can be achievable..
HTH
Rajesh

Similar Messages

How To Split File In to Multiple Files With out using B.P.M

Hi Guys,
How To Split File In to Multiple Files With out using B.P.M.
Thanks in advance
Regards's
KIran.B

Hello
below r the links were u will find message spilitting by graphicaaly i.e without using BPM.
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
Sender File Adapter with file conversion Multimapping --file content conversion with split messg mapping
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2748---- [original link is broken] [original link is broken] [original link is broken]
multimappig
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
hope this resolve your problem
thank's
Chetan

Problem with File RFC File scenario without using BPM

Hi all,
I am trying a File RFC File scenario without using BPM with the help of the following thread:
File - RFC - File without a BPM - Possible from SP 19.
The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
"Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
Can any body help me out in getting my problem resolved?
Thanks,
Adithya K

CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
URL: http://<host>:<port>/CPACache/refresh?mode=<b>delta|full</b>
The Monitoring url is like this: http://<host>:<port>/CPACache
Thanks & Regards,
Farooq.

File to Webservice Using BPM

Dear Friends,
Kindly give me some walkthrough doucment for File to Webservice Using BPM
it is urgent. Kindly help.

/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
refer that to design your interface. Note that instead of RFC you will require to use a WSDL for the WS call.
Fotr more about WSDL and its usage in a scenario ref:
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

File to Database Using BPM

Hi All,
I am trying to do one of the End-To-End scenarios which are described in the following document published by Mukeshlal Parida https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
I followed the steps described for the File to Database Using BPM.
I created a software component File Workshop and DB Workshop and created the respective products. I created the appropriate namespaces under the specified products. However, when I go to create the container elements in the Integration Process, I am only able to view and add the Abstract interfaces created in the specific software component where I am creating the integration process.
The instructions are not clear. I am on XI 3.0 (SP16). Any help would be appreciated.
Thanks
Sandeep

Hi,
U can use the abstract interfaces in BPM.
U have to define all the Interfaces as Abstract and use in BPM transformations. The Container elements are specific to the Software component.
From...
Yallabandi.

How to send multiple files in parallel using ftp with single connection

Hi.
i have written code for file upload manager using ftp..
it perfectly working with sequence file uploading in single connection..
And i tried to upload multiple files with parallel processing in a single connection.... but it is not working properly.. i also used thread concept
but single file only transfered and connection refused...
my code here...
//////////////////// main class //////////////////////////////////////////
ftp.connect();
ftp.login();
String [] archivos = new String[100];
                                  File dir = new File("C:\\Files Uploading\\");
                                   archivos = dir.list();
                                   for (int s=0; s<archivos.length;s++)
     //Start Data Transfer Here
     new DataTransfer(archivos[s]).start();
                                   Thread.sleep(1000);
/////////////////////// thread class ////////////////////////////////
class DataTransfer extends Thread
      String FileName="";
      String LocalPath="",RemotePath="";
       public DataTransfer(String fname)
     FileName = fname;
     LocalPath = "C:\\Files Uploading\\" + FileName;
     RemotePath = FileName;
     System.out.println(LocalPath);
        public void run()
                    System.out.println("DataTransfer Started");
     /File Transfer Here
     try
           FileInputStream input = new FileInputStream(LocalPath);
                           Ftp_Client.storeFile(RemotePath,input);
     System.out.println("Successfully sent : " + RemotePath);
     catch (Exception exc)
          System.out.println(exc.getMessage());
          System.out.println("DataTransfer Ended");
     }otherwise tell me any other alternate way

And i tried to upload multiple files with
parallel processing in a single connection....
but it is not working properly.FTP isn't a multiplexing protocol. How could it work at all?

File to Idocs using BPM

Hi,
Current Interface Flow - File (xml) to Idoc (single Idoc type)
Thirdparty sends a File for Goods Receipt. This file may have multiple orders.
Orders are sorted in an xslt by ORDNUM. Each record has a delivery type (Deliver Type PO or Delivery Type STO). For each order Graphical Message mapping occurs.
In case of PO, inbound delivery number and item number have to be received from ECC via an RFC call and passed to VBELN and POSNR. While in case of STO, source field ORDNUM and ORDITEM are passed to VBELN and POSNR. (RFC call happens only for POs, not for STOs)
In case of STO, TCode will be MB0A.and IDoc would be WMMBXY (As is the case right now)
In case of PO, there may be two cases -
a) There is at least one response from ECC for all the line items inside an order --> in this case TCode will be MB0A and IDoc is WMMBXY .
b) If there is no inbound delivery number for any line item from ECC inside an order --> TCode MB01 will be used and IDoc used is WMMBXY
So for all the above cases Target IDoc is WMMBXY.
Changes to be done - Now File (xml) to Idoc (Two different Idoc types, WMMBXY and DELIVERY03)
Now there is an additional requirement that I will be using an additional IDoc (DELIVERY03) in above case a).
I want to use BPM in this case
1) RFC call in message mapping to get the inbound delivery number (for POs only) (Should be before the message enters BPM)
2) Separating the messages based on IDoc type
3) Interface / Message mapping for each IDoc type
4)Send the message to ECC
Please suggest how to proceed with BPM
Thanks,
Varun
Edited by: Varun Reddy on Feb 4, 2011 4:47 PM

Hi Varun,
Follow this thread... You have answer for this.
This link gives design ideas for your requirement
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Follow Bhavesh discussion. It might be helpful too
Message Split: File to Multiple IDOC Types

How to upload multiple files in Webdynpro using File upload Screen Element

Hi Experts,
Can anybody tell me how to upload multiple files/pdfs in webdynpro using file upload screen element, and also please tell me what is the maximum storage limit of RAWSTRING data type,Advance Thanks.
Regards,
Sandesh

Hi Sandesh,
this is simply not supported, not in WebDynpro nor in standard HTML.
A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
I hope it will help u..
----------------------OR-------------------------
As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
http://scn.sap.com/docs/DOC-2270
----------------------OR-------------------------
You can use Table UI element.
Regards,
Deepak Singh

FILE TO IDOC USING BPM

Hi,
I am the fresher and new to XI. I want to know the step-by-step procedure for file to idoc scenario using bpm.I require it urgently.
Please help me out.
Thanks and have a nice day.

Sangeet - Check this blog :
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to multiple IDocs using IP in ccBPM</a>
Hope this helps.
Cheers!
Shireesh M

Unable to load multiple files to Essbase using MaxL and wildcards

I have multiple data files to load:
Files:
Filename.txt
Filename_1.txt
Filename_2.txt
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
However, when I try to run the following I receive the following error:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename*.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Error:
ERROR - 1003027 - Unable to open file [DB01/oracleEPM/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/MyApp/DB/../../Filename*.txt].
ERROR - 1241101 - Unexpected Essbase error 1003027.
I can run the following fine without any problem, but this only deals with the first of several files, and I’d rather not hard-code multiple files since the number might vary in the future:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Any ideas? And how about ASO databases?

JamesD wrote:
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
That is the tech ref for 11.1.2.2, are you on 11.1.2.2?
Import Data
11.1.2.2 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_imp_data.html
11.1.2.1 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref_1112100/frameset.htm?maxl_imp_data.html
Cheers
John
http://john-goodwin.blogspot.com/

File to RFC using BPM

hey guys
i m doin a synchronous File to RFC scenario using BPM and getting a 'NO receiver found error' in MONI,i checked my File as well as RFC adapter in RWB,the sender File adapter is green,RFC adpater is also green and the receiver file adapter is green but says 'no message processing until now'
i m takin help from the followin blog
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
the error in MONI is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I checked SM58 as well but it does not have any error XML messages.
and idea where shuld i check?
i check my mappin by using payload from MONI,mapping is working fine
thanx
ahmad
Message was edited by:
Ahmad ansari

Hi Ahmad,
In which step is the error occurring?
Have you checked your BMP status using SXMB_MONI_BPE?
PS: Usefull link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c">How To Monitor Integration Process (ccBPM)</a>
Regards,
Sergio

How to merge/append two files in sequence using BPM

Hi All,
My senario is to append two files data into a new file on target system, only if the two files are available on source system. In case one file on the source system, no need to process file. Data in the new file should be in sequence means 1st file data then 2nd file data.
Please suggest me how can i achieve this functionality using BPM.
Thanks & Regards
Sreeni

For the first part (two files required) design as per Prateek's suggestion
Data in the new file should be in sequence means 1st file data then 2nd file data.
create a data structure which will be a combined structure of File1 and File2....target structure should have first reference for File1 and then for FIle2....than having two MTs (File1 and File2) at the source and the target MT at the receiver create your mapping......this will ensure that File1 data occures first and then File2 data.
Regards,
Abhishek.

Send Separate Remittance Advice - Can I send multiple files to single supplier based on custom groups

I want to send multiple emails to single supplier based on the Legal Entity of the invoice paid.
eg. If a supplier has two invoices in a payment, both are paid by different legal entities of invoices payable .. then I want to send to different emails to the same supplier
I am able to create 2 pages in the RTF using <?for-each-group:OutboundPayment;DocumentPayable/DocumentPayerLegalEntityName?>
But I am unable to send 2 emails
please help..

When I know i'll be transforming or adding additional filters, I prefer to go directly to creating smart objects rather than grouping them first, since the relevant layers are automatically "grouped" by being pulled into the smart object. My thought is that the default name for a smart object (or a group, for that matter) should be the lowest layer on the selected stack that has a non-default name, since in most cases that's the one you'd want to use for the new smart object. I don't know exactly how Photoshop recognizes layer names, but since it knows what number to assign to new layers or individual types of adjustment layers, it should also be able to recognize when a layer name is not a default name.

Multiple files to idoc without bpm

Hi
I have gone through the previous threads and came to know that n:1 is not possible without bpm. But in case of idocs you can collect them in r/3 system itself using RSEOUT00 program. But if my scenario is like.......you have 10 files which are coming through ftp and we have to send the idoc to the target system. Is there any way to do this scenario without bpm ??
Thanks
kumar

Hi palnati !
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Multiple IDocs without BPM(occurance change)
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
In case you have multiple IDoc types ref:
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Have a look at this blog.. Might be helps to you..
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2748. [original link is broken] [original link is broken] [original link is broken]
Pls reward if useful

Combined FIles in PI using BPM without correlation

Hi All
I have a requirement, I have two files coming from the source system one file with Header Detials & other file with Item Detials and I have to combine these two files into a single file.
I have used the BPM in PI to combine the two files uisng correlation.
This scenario is working fine if both the files are having equal number of records wiht the same correlation ID.
Based on the correlation ID files will be combined in PI and send to the target system.
Now in case I am receiving the files in which corelation is not matching for few records then in that case process in waiting in BPM and get cancelled after some time & files will not be processed.
Do we have any option in BPM which will just cominge two files without correlation & passed through BPM & files got processed?
Thanks for your help in advance.
Thanks
Ajay

Hello Ajay,
I do agree with Anudeep that corelation is necessary to in order to merge the two messages.
I am sure you will find a correct corelation factor in order to merge the messages.
If there is no corelation, you can ask the functional consulatant to add certain veriables in the incoming messages that will corelate the messages.
Tx
Saurabh

Multiple files to single using bpm

Similar Messages

Maybe you are looking for