Multiple Firewire Connections on a MAC PRO 2008

Wondering if anyone knows if there are any issues with multiple firewire inputs on a MAC PRO? I will be downloading film footage as well as running a Presonus Inspire for Voice-Overs which also uses a firewire connection to the computer.

The MacPro comes with 1 FW400 + 1 FW800 ports in the back and 1 FW400 + 1 FW800 ports in the front. They ALL share the same bus.
You may, or may not, have problems. Some devices play well with others and some don't. For example, AJA STRONGLY recommends you put the io devices on their own bus, canon cameras often will only work when they are on their own bus, and so on.
I've no idea whether your firewire audio device will conflict with your video tape playback device. If it was me, I could pursue this a couple of ways. 1, contact the audio people and get their recommendation or 2, give it a try and see if it works. If it doesn't, I'd purchase a PCIe firewire card and connect the bus hog to it.
Good luck,
x

Similar Messages

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

Hi, I have a mac pro 2008 and I was wondering if it possible to connect to the apple cinema 27'' display

Hi, I have a mac pro 2008 eand I was wondering if it possible to connect to the apple cinema 27'' display.

Yes using an apple 5770 video card and a dual link DVI adapter like the Atlona DP400 adapter.
Look at the hits in this google search for lots of other discussions on this topic.

Adding USB 2.0 ports to a Mac Pro 2008

Hi,
I love my Mac Pro 2008! Great machine, awesome performance, but I need more ports Who needs only three USB ports in the back, that's a joke!
Anyways, I just bought 2 StarTech 6-port USB 2.0 PCI cards from an online vendor, but quickly found out that it didn't fit my Mac. The description of the card even says it is compatible with Mac OS X. I suspect that Apple have changed the PCI slots for something else in the Mac Pro 2008. What are they and can we buy USB card that fit those slots? If so where? I am desperate for more ports.

You may have stumbled upon or checked some of the support pages?
http://www.apple.com/support/macpro/
- which has a link to an article titled "about your PCI Express slots"
http://docs.info.apple.com/article.html?artnum=304122
Specs 2008: http://support.apple.com/kb/SP11:
PCI Express expansion7
Three open full-length PCI Express expansion slots
One PCI Express 2.0 x16 slot
Two PCI Express x4 slots
And of course support for up to four PCI Express video cards; Fibre Channel; Mac Pro RAID.
You could install a powered USB hub, or FW/USB2, as long as you have free slots for more. I have FW800, a 1x Sonnet Tempo (couple storage drives), and a 4x Tempo (multiple RAID sets; Port Multiplier card and multi-drive enclosures and 4 channels).

Mac Pro 2008 won't boot from install disc - black screen

Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.

Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row.

Replacing old HD with SSD and Hybrid HD Mac Pro 2008, 10.7.5

My old 1tb 7200 rpm drive has started doing some quirky things, so I decided to upgrade to a 240 Gb SSD for my OS and App's, and I would install the 2TB Hybrid drive to hold the home folder with movies, pics, music. So I formatted my 2TB disk in disk utilities.
I copied, by dragging and dropping my home folder from old drive to new 2TB, I went into system preferences, under User/Group created a new user at the administrator level, and set the new user to open at login.
When I restarted it was the old galaxy screen, the dock had moved back to the bottom and it was set up different.I also can open Iphoto or itunes and they are empty, "The folder “Pictures” can't be opened because you don’t have permission to see its contents", and the same goes for Itunes, I haven't tried FCPX or the Adobe Products I use.
"So, I think well I probably just need to set up my ssd with my OS and App's so the new disk can see my prefrences", so I format, use Carbon Copy Cloner, deselecting, under the User tab, my old User and the New user I had created for the new 2TB drive, because I have no room for it on the 240 GB drive. And, I deselected some apps I didn't want to come over. I cloned it, changed my start up disk in my preferences, and restarted.
I still get the same thing when I logged into my new 2TB Drive. I am planning on keeping my old drive for archive, and I also backed up to an external using Time Machine before I started messing with the new drives.
Please Help!
Mac Pro 2008
OSX 10.7.5

Mac OS X is inherently a Multi-User system designed to protect each User's data from all other Users. A new User does not have access to your existing files, including the desktop Preferences and the Dock Preferences
You need to do one of:
a) change all the permissions all around -OR-
b) make this change without creating a new User (e.g., by cloning your original User or by Installing a new version of Mac OS X and using Assistants to connect to the old User data. This guide can help:
Setting-up a new Mac from an old one, its backups, or a PC

Mac Pro 2008 Won't Start Up without Option Key

Hi.
I cannot start up my Mac Pro 2008 without holding down the Option key.
My Snow Leopard internal hard drive failed, so I replaced my failed internal drive with a brand new one and put the cloned backup onto it. I also have other internal drives and partitions with systems 10.5.6, 10.7.5, and 10.8.4. I briefly added a Mavericks partition, but removed it.
I THINK the problems started after the HD failure, but I'm not sure. I added no peripherals recently, although I did add 4 gigs of RAM which were faulty and I had to replace them. But they test fine with a memory test.
If I Restart, the Mac comes up with a grey screen and won't boot into any system.
If I Shut down, then Start up, I get the gray screen.
In System Preferences, I can see every single possible Startup Drive, but no matter which one I select, the same gray screen happens on boot up.
However, if I hold down the Option key (from startup or restart), then I can choose any startup volume and it starts just fine.
I've run Disk Utility many times for Repair Disk and Repair Disk Permissions on every volume. I've run Disk Warrior. I've zapped the SMC/PRAM, etc. I've tried starting up from external firewire drives and USB drives. No matter which drive I select in StartUp Disk Preferences, it's the same grey screen.
I've tried starting up with ZERO peripherals attached except for USB keyboard and mouse.
I've taken out all startup and login items.
I'm don't know what else to try. I don't mind using the Option key every time, but I'm worried it's a sign of impending problems.
Thanks!

Barry, thanks for your reply. Yes, that's what I mean when I wrote:
"In System Preferences, I can see every single possible Startup Drive, but no matter which one I select, the same gray screen happens on boot up."
I selected a default startup volume in sys preferences, closed it, and restarted. I tried every volume possible in turn.
But thanks for doublechecking

Need help with Mac Pro (2008) iCloud sync problem

I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing. I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files. I then found that I did have another Mountain LIon partition in which the data syncing all worked. Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work. I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing. I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files. I then found that I did have another Mountain LIon partition in which the data syncing all worked. Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work. I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

Firewire HDs vanish from Mac Pro

I have a series of hard drives connected to my Mac Pro via the rear Firewire 800 connection. This morning, they had all disappeared from the desktop. The connections appear to be fine: the drives all power off if they're not connected to the computer, and they all seem to be working (lights on, disks spinning as normal). Any ideas?

Reset the FW ports and bus; find a better make of FW cases; insure they have latest firmware for FW bridge chipset; check power adapters.
Series: too many and daisy chained; add PCIe FW800 (Sonnet, Aaxeon etc) or switch to native SATA.

Mac Pro 2008 always crash after sleep and after first start

Hello, new in the forum,
2 years ago, I replaced the main disk of a Mac Pro 2008 for a SSD Samsung 470 256 Go.
Until then, it always crashed 1 or 5 minutes after sleep mode (which I didn't used much), and not always 10 to 15 minutes after the first start of the day.
No matter if I was working on it or not… Suitcase installed or not (no font problem here). Rest of the day was fine (if no sleep !).
The difference of speed was so big and "good" that I dealed with it. I though that the Mac Pro was a little old for the SSD technology, and that Apple would fix it, with chance…
2 weeks ago, I installed Maverick :
I got crashs during the work flow too. I needed to re-start 3 times at least… Re-start without extension was ok (or not), re-start, crash, re-start without extension, restart ok. I used Onyx, did PRAM too. And sometimes, I needed to re-install Maverick or even to do a clean-install !
So I suspected the Samsung 470 for all (sleep and work crashs) and replaced it for a Samsung 840 Pro 512 Go.
And the Mac Pro returned to Mountain Lion.
Not really better : no crash one day (yeeeees!) and crash after the first start the next day (nooooo!). Every time I tested sleep mode, it crashed.
My system :
Mac Pro 3.1 - 2,8 GHz - Quad
Mountain Lion, 10 Go ram DDR2, ATI Radeon HD 2600 XT, 30' cinema display.
Adobe CS5 alone (minimal install) with Onyx to repair after each crash.
Could it be the video card, the mother board, the age of the boy ?
Thanks a lot !
Christophe S

Edit !
I said that Finder and apps were blocked after 10 seconds (without extension).
But it was to clic on Launchpad that blocked all, and 5 minutes later it works again.
I did clic again on Launchpad, it blocked and 2 minutes later it appeared full screen but with rainbow circle, and quit.
- Restarted with extensions. Kernel panic!
- Restarted the mac and the grey screen with Apple blocked, without any mouse this time. 15 minutes later, still blocked.
- Forced restart without extension. Here are the reports of Kernel Panic and EtreCheck:
Kernel Panic Report:
Interval Since Last Panic Report: 122463 sec
Panics Since Last Report:          1
Anonymous UUID:                    52E60929-F5AE-D9CD-04B0-1872526C0821
Mon Oct 13 10:58:17 2014
panic(cpu 3 caller 0xffffff8007cb8945): Kernel trap at 0xffffff8007ef69e0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008a, CR3: 0x000000002f749000, CR4: 0x0000000000000660
RAX: 0xffffff80209bb7e8, RBX: 0xffffff801fc6d808, RCX: 0x0000000009000000, RDX: 0xffffff801fc6dde0
RSP: 0xffffff8131b7bbc0, RBP: 0xffffff8131b7bc00, RSI: 0x00000000000c43ff, RDI: 0xffffff801fc6dde0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80220fbfa4, R11: 0x0000000000000020
R12: 0xffffff801fc6dde0, R13: 0x00000000000c43ff, R14: 0x00000000000c43ff, R15: 0x0000000000000002
RFL: 0x0000000000010202, RIP: 0xffffff8007ef69e0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008a, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff8131b7b860 : 0xffffff8007c1d636
0xffffff8131b7b8d0 : 0xffffff8007cb8945
0xffffff8131b7baa0 : 0xffffff8007ccebfd
0xffffff8131b7bac0 : 0xffffff8007ef69e0
0xffffff8131b7bc00 : 0xffffff8007eee0d6
0xffffff8131b7be00 : 0xffffff8007d1a5d6
0xffffff8131b7be60 : 0xffffff8007d092aa
0xffffff8131b7bf50 : 0xffffff8007fe97ba
0xffffff8131b7bfb0 : 0xffffff8007ccf453
BSD process name corresponding to current thread: mdworker
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 121192507210
last loaded kext at 8889944220: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f899fe000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.4.7fc4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.iokit.IOBluetoothSerialManager 4.1.7f4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 8.1.6
com.apple.driver.AppleUSBDisplays 357
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.ATIRadeonX2000 8.1.6
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.CSRHIDTransitionDriver 4.1.7f4
com.apple.driver.PioneerSuperDrive 3.3.1
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.kext.AMD2600Controller 8.1.6
com.apple.kext.AMDSupport 8.1.6
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Bluetooth: Version 4.1.7f4 12974, 3 service, 12 devices, 0 incoming serial ports
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: ST31000524AS, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: hub_device, apple_vendor_id, 0x9120, 0xfd500000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 4
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd521000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd522000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9220, 0xfd530000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed
Report EtreCheck :
Description du problème :
Here is the report of EtreCheck after the Kerner Panic sent before.
Christophe.s
EtreCheck version : 2.0.2 (86)
Rapport créé 13 octobre 2014 11:23:31 UTC+02:00
Informations matérielles : ℹ️
Mac Pro (début 2008)
Mac Pro - modèle : MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU : 8-core
10 GB RAM Pas extensible
DIMM Riser B/DIMM 1
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 2
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 1
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 4
2 GB DDR2 FB-DIMM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Informations vidéos : ℹ️
ATI Radeon HD 2600 - VRAM : 256 MB
Cinema HD Display 2560 x 1600
Logiciel du système : ℹ️
OS X 10.8.5 (12F45) - Uptime: un jour 0:11:6
Informations des disques : ℹ️
Samsung SSD 840 PRO Series disk0 : (512,11 GB)
Statut S.M.A.R.T. : Vérifié
disk0s1 (disk0s1) <non monté> : 210 Mo
MacPro SSD (disk0s2) / [Startup] : 511.25 Go (472.61 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
ST31000524AS disk1 : (1 TB)
Statut S.M.A.R.T. : Vérifié
disk1s1 (disk1s1) <non monté> : 210 Mo
MacPro 1To (disk1s2) /Volumes/MacPro 1To : 999.35 Go (633.08 Go libre)
Recovery HD (disk1s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Verbatim Portable USB Drive 320,07 GB
Statut S.M.A.R.T. : Vérifié
disk3s1 (disk3s1) <non monté> : 210 Mo
320 Go Christophe Syren (disk3s2) /Volumes/320 Go Christophe Syren : 319.73 Go (313.64 Go libre)
USB 2.0 USB Flash Drive 8,17 GB
Statut S.M.A.R.T. : Vérifié
SANS TITRE (disk2s1) <non monté> : 8.17 Go
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Représentants de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.CS5ServiceManager.plist Aide
[désengagé] com.extensis.FMCore.plist Aide
Daemons de lancements : ℹ️
[invalid?] com.adobe.SwitchBoard.plist Aide
Représentants de lancement pour l’utilisateur : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.ARM.[...].plist Aide
Éléments Ouverture : ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Plug-ins internet : ℹ️
OfficeLiveBrowserPlugin : Version : 12.3.6 Aide
AdobePDFViewer : Version : 9.5.5 Aide
QuickTime Plugin : Version : 7.7.1
JavaAppletPlugin : Version : 14.9.0 - SDK 10.7 Vérifier la version
Panneaux de préférences de 3ème partie : ℹ️
Growl Aide
Time Machine : ℹ️
Skip System Files: NO
Sauvegarde automatique : OUI
Disques sauvegardés :
MacPro SSD : Taille de disque : 511.25 Go Disque utilisé : 38.64 Go
Destinations :
Data [Network]
Taille totale : 2 To
Nombre de sauvegardes total : 9
Sauvegardes la plus agée : 2014-10-08 01:39:21 +0000
Dernière sauvegarde : 2014-10-10 11:31:35 +0000
Taille de la disque de sauvegarde : Excellent
Taille de sauvegarde 2 To > (Taille de disque 511.25 Go X 3)
L’utilisation du CPU par processus : ℹ️
      1% WindowServer
      0% ps
      0% fontd
      0% System Events
      0% coreservicesd
L’utilisation de la mémoire par processus : ℹ️
97 Mo Dock
97 Mo Finder
75 Mo WindowServer
64 Mo com.apple.security.pboxd
64 Mo CalendarAgent
Informations de la mémoire virtuelle : ℹ️
523 Mo RAM Disponible
1.04 Go RAM Active
307 Mo RAM Inactive
8.86 Go RAM Résidente
266 Mo Pages entrants
0 o Sorties pages

Can i plug a uk mac pro 2008 in europe

Working in Spain with a Mac Pro 2008 bought in UK.
The plug is UK type.
Can I change the plug cable for an european one (2 PINs)
without risking the computer.

If it is a 2008 Mac Pro (desktop model), it should have a built-in power supply with a three-pin inlet (protective earth).
https://manuals.info.apple.com/en_US/Mac_Pro_Early_2008.pdf
According to the technical specifications, the line voltage is "100-120V AC or 200-240V AC (wide-range power supply input voltage)", whereas it says "100-240 V alternating current (AC)" in the manual above. To be on the safe side, it is never a bad idea to check whether the actual mains voltage in the country of use falls within a range mentioned on a label on the computer.
Mac Pro (Early 2008) - Technical Specifications
In countries using earthed wall sockets of the "Schuko" type, a complete molded cable (IEC cord) is typically used for the connection of computers. Such cables can be bought locally.
http://en.wikipedia.org/wiki/IEC_60320
http://en.wikipedia.org/wiki/AC_power_plugs_and_sockets
http://en.wikipedia.org/wiki/Schuko

Replacement mac pro 2008 motherboard

Hi,
It looks as if the logic board in my dual quad core 3Ghz mac 2008 mac pro has died.
Rebooted it last night and I just get the grey screen, apple logo and spinning icon
Removed all peripherals and network connections - no change
tried to boot into safe mode and the sequence gets so far and then the machine shuts down
removed all internal disks apart from system disk - no change
replaced system disk with backup system disk - no change
reset the EFI - no change
removed some 4Gbyte memory DIMMS I'd installed recently - no change
Took backup system disk into work and put into same age chassis and disk booted just fine.
So
1). Found a mac pro 2008 used motherboard for £345 on ebay - eek!!
2). If all I need is a motherboaed, can I install a newer mac pro motherboard in the chassis I've currently got?
Rgds
Alex

have to agree, $600+ part www.dvwarehouse.com
sounds like they really did not address (all) the problems and went for a superficial renstall the system with a new drive instead.
10.7.5 may not be ideal OS for 3,1 2008s
FBDIMMs are cheap now and higher quality, $64 8GB (I'll bet they soaked you though)
SMC Reset for won't start
the OEM graphic card, those are a MUST replace list, esp for 10.7.5 but for anyone too
10.8.3 makes sense
you have to avoid any old plugin drivers software now or go back to 10.6.8 which some find more reliable and because they rely on Rosetta to run PowerPC coded software.

How to allow multiple users login to a MAC PRO without interruption?

I have a mac pro, which runs Yosemite, (2013 module) to be used as a server. However, I have difficult to let multiple users to use the mac simultaneously.
Objective:
    One person uses the mac directly on his desktop, while the others to login remotely though VNC from PC (win 7/Linux).
    The users have their own workspace, and they will not interrupt each other.
What I tried:
    I created two mange accounts on the MAC.
    Account 1 was used to directly login on the mac desktop.
    Account 2 was used to login to the mac from a PC though VNC. (I also tried this from a Centos workstation with the Tiger VNC viewer)
Problem:
When account 2 is login, the location monitor will automatically change to that account as well. Both accounts shared exactly the same screen, mouse & keyboard actions. It is impossible to let multiple users to use the MAC pro simultaneously without interruptions.
If I use "hdiutil attach" to mount a dmg file though SSH with account 2, the folder will automatically show in the local desktop login with account 1.
Question:
I read something about the "Per-user screen sharing". It says, "You can remotely log into a Mac with any user account on that computer and control it, without interrupting someone else who might be using the computer under a different login." Is it possible to do this from a PC or Linux client?
If the problem is simply due to the poor functionality of the build-in VNC service in Yosemite, I appreciate your help to suggest some other decent VNC server for Yosemite. I know the Vine Server (OSXvnc), but I failed to install it on the mac because it is incompatible with the Yosemite.
Does the SSH is supposed to work in this way in OSX? I mean the local account can see the folder mounted by another account though SSH.
If any specific version of Yosemite is required to allow multiple users to access a mac simultaneously? Just as the win 7 professional allow only one user to login in at each time. But with the remote desktop server of windows, multiple users are able to use the same computer at the same time without any problem.
If you familiar with any of the above questions, please help. Any comments and suggestions are appreciated.
I know the best way to get the solution is to direct call the apple support. However, it is really not easy to call them. Because it always results with long waiting time and then the people pick up the phone will transfer my call to an expert who will make me to describe the problem again.
Since I'm not interested in the technique details of all the problems, it is also grateful if you would provide a direct instruction to let me setup the computer for the purpose.
Thanks you very much for your kindly help.

I cannot help with the screen sharing, although I have just tried it with a RealVNC client on an iPad and it seemed to work OK.
However on the disk showing on all users desk tops have you unchecked the "ignore ownership on this volume" check box? You can check the drives permissions with CMD i command.

My Mac pro 2008, not running after the Apple logo, i rebooting and i rebooting

My Mac Pro 2008 no boot afther the Logo Apple, reboot, reboot and reboot only, and in XP, the graphic is pertubed with bad graphics ... the mémory it's good, and i thinks my card graphic is out. SRY for my english, it's not my language. Help my please, my apple care is finished 10/2011, and i will repared itself. Many thanks. Alain Muno

Not saying this IS your problem, but … I just went through avery similar problem with Mac Pro3,1. Here is my story.
On boot of any Mac OP system drive, internal or externalHDD, (Lion or Snow Leopard), original Mac Pro install CD, Snow Leopard CD,nothing. (Would only go to gray screen,apple logo, spinning gear that would stop spinning after about a minute.) But, it would boot on XP drive. However, in XP, on Windows black startupscreen, had alternating columns of two different patters of blue dots and XPgraphics were not as they should be (larger icons on desk top, slow response,different size of desk top (maybe 600x400 when it should have been1024x768). Supplied hardware test showedno failures. Took it to shop. Their better diagnostics showed nofailures. All peripherals (my drives, myCDs, etc, disconnected. (NOTE: they didnot try a new video card since they did not have one.) Still would not start even using their drives(external or internal). Shop tried a newlogic board. That did not work and theyput the original one back in. Shop saidall they could come up with was new processors. This was not a cost effective option and they had none to try.
After thinking about it more, I figured it could be thevideo card: the original 8800 GT that came with the Mac: that it was so bad itwould not start in Mac OS but would limp along in XP. I was all set to buy another vid card one-bay just to try. While doing thatresearch, came across several articles on the Internet that discussed vid cardfailure due to micro-cracks in some solder joints. These develop due to age/heat cycles. The proposed fix was to ‘reflow’ the solder. Figured it was worth a try before spendingthe money on a new vid card. Found thesedetailed instructions on youtube. http://www.youtube.com/watch?v=T7um_hZYom4 I followed the procedure, put the vid cardback in, and now it works just fine.
I did not and would not do this until I had ruled outeverything else. But, it has worked forothers and it did work for me.

Multiple Firewire Connections on a MAC PRO 2008

Similar Messages

Maybe you are looking for