Multiple Flows of Same Name in One File
(FM11 on Win7)
The Compare Documents utility reports that the same file has multiple flows of the same name, and so does not compare the files. Doh!
The report from the utility seems accurate.
I see two end-of-flow markers in the file, one on the second page and another on the final page.
The flow tag names of the text frames on the body pages are identical: BodyText.
The AutoConnect box on each is selected.
I still want to compare the files, so I try this:
When I do View > Master Pages and then go back to View > Body Pages, FM says some body pages in the file override their master page layout.
Do I want to override? I say yes.
I go to the body pages. Everything looks the same.
I try Compare Documents again. Same message.
So how do I join those two flows, even though they apparently are already Autoconnected and have the same name?
Or, as an alternative, how do gain the benefits of a Compare Documents operation in a file that contains two flows of the same name?
Best regards,
iPhone will duplicate if you import contacts from your SIM card or namually add new contacts and save in iPhone memory instead of save in iCloud. So you have contacts from iCloud and from iPhone memory too.
Try to save your contacts just one place, like iCloud.
Hope it will be helpful
Similar Messages
-
can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.
Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it. -
We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree. -
im having a problem with my ipod making Multiple albums of same name in itunes it shows all the songs under the same album name but on the ipod in album view the same album comes up multiple times..how can i fix that?
Hi, welcome to Apple Discussions.
See my previous post on Grouping Tracks Into Albums, in particular the topic One album, too many covers
tt2 -
How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?
How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...
Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.
-
I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync contacts separately?
How to rename your device in iTunes
-
My own package of the same name as one in the repo...
In a nutshell, how does pacman handle a user-created package of the same name as one in the repo? I ask because I'd like to customize the build options on a package that's in the official repo. Is it best to simply change the name of my package or is pacman smart enough to know that package xyz installed locally is not to be upgraded to package xyz from the repo?
thayer wrote:What I typically do is bump the release number to 99, such as foopackage-1.0-99. By doing it this way pacman won't upgrade the package unless a new upstream release is made, such as 1.1 in the previous example.
Similarly, if you build a package locally to fix some packaging bug, and you expect that you'll be interested in any updates at all, I bump the release number by 0.1 so it's bigger than the version I'm fixing but smaller than whatever the Arch maintainer will supply next. -
I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping! -
With all the trouble I've been having with App Store update inconsistencies, I went and looked at the directory where the .ipa files are stored. (These are the actual application files.) I was already aware of the multiple generations of files that are kept in the directory when apps are updated, but I noticed something else...
There are some applications that have the same name. In my case, I have more than one Solitaire game simply called "Solitaire" and I have more than one Sudoku game with the name "Sudoku". It looks like the way iTunes differentiates them is by giving them generational number. For example, one Sudoku program is called "Sudoku.ipa", and another is called "Sudoku 1.ipa". Then if there is an update to the first program, it gets the new name "Sudoku 2.ipa". You can see that different programs have different files sizes, but by looking at names there is no way to tell which is which.
I wonder if this factors into some of the problems with application updates and synching them to the iPhone? It seems odd that the same sequential numbering scheme is used for two different purposes: 1. Distinguishing different applications that have the same file name, and 2. Keeping multiple generations of the same program in the directory. It could get pretty confusing.If I delete extra .ipa files when two different applications have the same name, then I need to keep track of which is the current version of what. "Sudoku 4.ipa" might be the latest version of one program, and "Sudoku 7.ipa" could be the latest version of another.
I wish Apple would create a naming scheme where every application has a unique name, and sequential generations are not used. This would make it much cleaner, and there would be no ambiguity as to either which program is which, or which version is which.
I find the safest way to get rid of all the dups is to just delete them all and re-download the app. The bugs in iTunes still make a mess of things, though. -
Migrating multiple domains with same name - how? Rename? Migrate through temporary domain?
Hi,
we have acquired another company, and they have multiple, separate domains with the same name (every site has a domain with NetBIOS name "COMPANY" and DNS name "company.local"). Now we want to migrate all these domains into ours using
ADMT.
Unfortunately, we did not manage to migrate one of these domains completely, so the trust must remain established for some time. But we have to continue with the second domain - which normally would require a trust, but of course we can't establish a trust
to two domains with the same name at the same time.
I found two potential solutions for the dilemma, but I'm not sure if both are reasonable:
1) Rename the domain with RENDOM.EXE to COMPANY2 and company2.local and then migrate with ADMT
2) Migrate COMPANY to a temporary domain such as COMPANYTEMP and then migrate from COMPANYTEMP to our domain
Given that there are roughly 100 users, 2 domain controllers and 8 other servers, what would be the better approach? Is option 2 possible at all, so would I be able to use the sidHistory attribute migrated from the original COMPANY domain in our domain at
all?
There is also an Exchange 2007 server, which seems to make option 1 impossible unless we find another way to migrate it (like, export all mailboxes to PST before migration) ...Ok, that's what I expected. Still, I have servers in the old domain, so if I do these steps:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
disconnect the domain COMPANY(right) ,
users will lose connectivity to any servers in the domain. I understand that it does not work with all domains connected? Of course I can't make OURCOMPANY's domain controllers see the DCs of COMPANY (right) in DNS (though I could achieve it the other way
round).
My original plan was:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from
COMPANYTEMP --> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
remove trusts and old domain
But I see that this will not work out, right? So, my only option would be:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
Migrate computers and servers to COMPANYTEMP
Install new Exchange server in COMPANYTEMP
migrate mailboxes to COMPANYTEMP
disconnect / abandon COMPANY(right)
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from COMPANYTEMP
--> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
Migrate mailboxes
remove trusts and old domain
And to minimize user impact, all this would have to be done in one go (over night), which is hardly possible ......................... -
Utility that makes jpg files with same name as avi file
I would like to have my avi files catalogued in Photoshop elements 2.0 as I do with my photos - tagging etc.
but I do not want to include the avi files in my photoshop catalogue since when backing all photos all clips would be included = to many GB ( I already back up the avis separately)
So what I want is an easy way to automatically convert a frame from an avi file and save it with the same name as the avi.jpg - so I can import that to Phel and tag it.
Any one who knows of such an utility?>So what I want is an easy way to automatically convert a frame from an avi file and save it with the same name as the avi.jpg - so I can import that to Phel and tag it.
Jan,
Are you aware that the Photoshop Elements Editor has a function that will create a still photo from a frame of a video? Look at File > Import > Frame from Video in the Editor workspace.
And I think that Premiere Elements 2 may also have a function for capturing a single frame and saving as a photo file. (I don't have Prem Elem 2 available at the moment to verify that it is present in v2.) I believe that it was in Prem Elem 3 that I used this function.
However, I don't think that either the Photoshop Elements or the Premiere Elements functions satisfy your request that it be automatic. I think that you would need to invoke that command for each video clip and then choose which frame of the video. -
Can i have xml elements with same name but one is having attrbt..?
Hi all,
I am suppose to take input from one system into BPEL.That system is auto gererating xml file. But that file is strange. It has two xml element with
same name but with completely different sequence. First one is having two comlexTypes while second is having 5 simple types.
Now the difference is First element is having attribute while second is not.
So is that file is correct.?
thanks a lot.
/mishitcan you post the file? or load the file into JDeveloper and check the syntax or use XMLSpy for validation of the XML.
-
Global Address List for multiple people with same name?
When writing a new email, I want to add a name from the global address list of my microsoft exchange Contacts group. I select the blue plus button and type in the name. If there is more than one person in my company with the same name, both people will show up. However, Mail is not letting me see the details of either of the two people so I don't know which one is the right one.
However, if I start from Contacts, Groups, Exchange and type in that person's name, when I select a name, a second screen will show up with the details (email address, title, etc) of the person. That way, I know which one is the correct person who I want to email. Why can't I do this directly from Mail? If I need to send an email to multiple people from the GAL, I don't want to have to search for them via Contacts.
Thanks!I don't know the exact and complete specification of your intended schema...
anyway, from what I can see in your post, I assume that
<deed>
<deed_type>
<name>Quit Claim</name>
<value>Sheriff</name>
</deed_type>
<deed_type>
<name>sheriff's deed</name>
<value>Sheriff</value>
</deed_type>
<deed_type>
<name>Warranty</name>
<value>W</name>
</deed_type>
</deed>would be the "proper" way to go...
which makes your "deed_type" a complexType, including a sequence of two kinds of xs:string elements : "name" and "value" -
Bug: Application Express - Multiple pages with same name
In my APEX application, I have mulltiple pages with the same name (user requirement). In SQL Developer, it shows the pages with the same name under the MAX Page ID. For instance, I have pages 18, 21 and 22 with the name of "Binder". In SQL Developer I see 3 APEX Page entries for Page 22. And it shows all of the page items for Page 22 in all of the entries.
Thanks,
DanIf I delete extra .ipa files when two different applications have the same name, then I need to keep track of which is the current version of what. "Sudoku 4.ipa" might be the latest version of one program, and "Sudoku 7.ipa" could be the latest version of another.
I wish Apple would create a naming scheme where every application has a unique name, and sequential generations are not used. This would make it much cleaner, and there would be no ambiguity as to either which program is which, or which version is which.
I find the safest way to get rid of all the dups is to just delete them all and re-download the app. The bugs in iTunes still make a mess of things, though. -
How do I automate merging multiple layers with same name?
It was suggested I ask this question in this forum - any advise gratefully received!
I have to combine over a 800 files into one photoshop file. Each file has with sixty layers. The 60 layers in each file are named identically: Layer 1, Layer 2, Layer 3 up to Layer 59, Layer 60. My intention is to create a final composite file with 60 merged layers (for an animation). That is, with all the Layer 1's merged, all the Layer 2's merged, all the Layer 3's merged and so on. What I need is a script which will merge all layers with the same layer name, ie all the Layer 1s, all the Layer 2s etc (ideally without having to merge each set of layers separately).
I am using Photoshop CS6 and at present I am merging by using the find/name function, then highlighting all the layers selected and then using 'merge layers'.
Any ideas?
Best
JRThis might be close, it will prompt for a folder containing all the 800 files, it will use tif or psd files.
Once you have selected the folder sit back and watch...
#target photoshop
app.bringToFront();
main();
function main(){
selectedFolder = Folder.selectDialog( "Please select input folder");
if(selectedFolder == null) return;
var fileList = selectedFolder.getFiles(/\.(tif|psd)$/i);
open(fileList[0]);
checkBackGround();
setLayersVisOn();
for(var z = 1;z<fileList.length;z++){
open(fileList[z]);
checkBackGround();
setLayersVisOn();
dupLayers(app.documents[0].name);
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
if(z % 9 == 0) mergeSameNamedLayers();
mergeSameNamedLayers();
function checkBackGround(){
activeDocument.activeLayer = activeDocument.layers[activeDocument.layers.length-1];
if(activeDocument.activeLayer.isBackgroundLayer){
activeDocument.activeLayer.name=activeDocument.activeLayer.name;
function twoOrMoreSelected(){
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
var desc = executeActionGet(ref);
if( desc.hasKey( stringIDToTypeID( 'targetLayers' ) ) ) return true;
return false;
function mergeSameNamedLayers(){
//Get a list of the layer names
var layerNameList = getNamesPlusIDs();
//create an array for unique layer names
var uniqueName = new Array();
for(var s in layerNameList){
if(layerNameList[s][2] == "false") uniqueName.push( layerNameList[s][1].toString());
//now we should have unique layer names
uniqueName = UniqueSortedList( uniqueName ).sort();
//select all layers with the same name, merge them and set blendmode
var BlendMode = new String();
for ( var w in uniqueName){
deselectLayers();
for(var z in layerNameList){
if(uniqueName[w].toString() == layerNameList[z][1].toString()){
//select these layers and get blendmode.
BlendMode = layerNameList[z][3].toString();
selectLayerById(Number(layerNameList[z][0]), true);
if(twoOrMoreSelected()) activeDocument.activeLayer.merge();
setBlendMode(BlendMode);
function setBlendMode(blendMode) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var desc2 = new ActionDescriptor();
desc2.putEnumerated( charIDToTypeID('Md '), charIDToTypeID('BlnM'), stringIDToTypeID(blendMode) );
desc.putObject( charIDToTypeID('T '), charIDToTypeID('Lyr '), desc2 );
executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
function deselectLayers() {
var desc01 = new ActionDescriptor();
var ref01 = new ActionReference();
ref01.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc01.putReference( charIDToTypeID('null'), ref01 );
executeAction( stringIDToTypeID('selectNoLayers'), desc01, DialogModes.NO );
function UniqueSortedList(ArrayName){
var unduped = new Object;
for (var i = 0; i < ArrayName.length; i++) {
unduped[ArrayName[i]] = ArrayName[i];
var uniques = new Array;for (var k in unduped) {
uniques.push(unduped[k]);}
return uniques;
function selectLayerById(ID, add) {
add = (add == undefined) ? add = false : add;
var ref = new ActionReference();
ref.putIdentifier(charIDToTypeID('Lyr '), ID);
var desc = new ActionDescriptor();
desc.putReference(charIDToTypeID('null'), ref);
if (add) {
desc.putEnumerated(stringIDToTypeID('selectionModifier'), stringIDToTypeID('selectionModifierType'), stringIDToTypeID('addToSelection'));
desc.putBoolean(charIDToTypeID('MkVs'), false);
executeAction(charIDToTypeID('slct'), desc, DialogModes.NO);
function dupLayers(DocName) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var ref2 = new ActionReference();
ref2.putName( charIDToTypeID('Dcmn'), DocName);
desc.putReference( charIDToTypeID('T '), ref2 );
desc.putInteger( charIDToTypeID('Vrsn'), 5 );
executeAction( charIDToTypeID('Dplc'), desc, DialogModes.NO );
function selectAllLayers() {
var desc29 = new ActionDescriptor();
var ref23 = new ActionReference();
ref23.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc29.putReference( charIDToTypeID('null'), ref23 );
executeAction( stringIDToTypeID('selectAllLayers'), desc29, DialogModes.NO );
function setLayersVisOn(){
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
try{
activeDocument.backgroundLayer;
var i = 0; }catch(e){ var i = 1; };
for(i;i<count;i++){
ref = new ActionReference();
ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
var desc = executeActionGet(ref);
var layerName = desc.getString(charIDToTypeID( 'Nm ' ))
if(layerName.match(/^<\/Layer group/) ) continue;
if(!desc.getBoolean(stringIDToTypeID('visible'))){
var list = new ActionList();
list.putReference( ref );
desc.putList( charIDToTypeID('null'), list );
executeAction( charIDToTypeID('Shw '), desc, DialogModes.NO );
function getNamesPlusIDs(){
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
var Names=[];
try{
activeDocument.backgroundLayer;
var i = 0; }catch(e){ var i = 1; };
for(i;i<count;i++){
if(i == 0) continue;
ref = new ActionReference();
ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
var desc = executeActionGet(ref);
var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
if(layerName.match(/^<\/Layer group/) ) continue;
var layerType = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'layerSection' )));
desc.hasKey( stringIDToTypeID( 'smartObject' ) ) ? SO = true : SO=false;
var blendmode = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'mode' )));
Names.push([[Id],[layerName],[SO],[blendmode]]);
return Names;
Maybe you are looking for
-
Crystal Reports + parameters + jsp
Can any one help to resolve this problem .....thanks in advance .. 1) I have a crystal report designd using the crystal reporting tool, in which the sql query used has one parameter field specified as {?parametername}. 2) I want to invoke this report
-
I can't register my apple care protection
i can't seem to register my apple care protection plan. I was stuck at Step 3 after i click submit using link http://www.apple.com/support/products/ can anyone help?
-
My ipod wont turn on, charge, or reset.
my ipod wont charge or be reset when i pulg it into the computer. what do i do.
-
I've got some old lotus wordpro files I want to open with my mac. Tried it a while back and there was a free program on the net that would do it on a pc but not a mac. any suggestions?
-
Adobe Indesign CS6 - 30 day trial version link?
Hey, I would like to try out Adobe Indesign CS6, I can't run Creative Cloud yet, because my Mac laptop is 8 years old and runs an older OS, so thats why I want to try and older version - where on earth can I download a 30 day trial? I can't find a li