Multiple Fonts in one subtitle and subtitle layer.

I am trying to use a music notes font to start some text that is sang. I am using MusiSync and Bell Gothic Std all in one subtitle. It works great on the very first subtitle on the track. Every subtitle after that uses all Bell Gothic Std without using MusiSync. So now I have a weird symbol instead of the music notes that I want.
I have tried creating the subtitles using the "Add Subtitle" option in the Encore monitor window and I have also tried clicking and dragging a new subtitle area using the "T" tool from the top toolbar. Neither work properly.
Any ideas?

Chet,
I found it. It wasn't Joe, it was Larry. (I'll skip the obvious puns centered around "Curly")
Here's the text:
The easiest workaround I've found for this problem is to do the following:
1) Select all subtitle clips in the timeline (lassoing all the subtitle tracks is the quickest way to do this).
2) Make a change to the Leading attribute in the Character tab.
3) Undo.
This will force all the subtitle clips to write correctly to disc.
I worked with David on this and the above steps seemed to work for him. Also, the problem only appears in certain workflows. Specifically, when you've made subtitle edits and closed your project without burning to disc, then reopened the project and immediately burned it to disc without any further edits. This is where Encore's burning engine gets confused; it doesn't regenerate new subpicture overlays and instead uses the previous bitmaps. It's definitely a bug and engineering has been made aware of it. Sorry we didn't catch this one in time!
Larry
Encore DVD QE

Similar Messages

  • How can I convert multiple files at one time and not one at a time

    How can I convert multiple files at one time and not one at a time

    Hi Plissey1950,
    Sorry for the lengthy delay to a response.  Are you trying to convert multiple files to individual PDF files at the same time? (not combine them).  If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
    Thanks,
    David

  • Is there an all in one printer that allows me to scan multiple pictures at one time and put them directly into iPhoto?

    I am looking to replace an old HP psc 2210 all in one printer  with a new all in one that will let me scan multiple photos at one time and put them directly into iPhoto.  Dos anyone have suggestions for a printer that will do this?

    I use an HP Photosmart, but most scanners will scan multiple photo's. I just make sure in the scan preferences, I tick the box to "Detect Seperate Items". I normaly scan 6 to 8 photo's at a time, size depending on how many I can fit on the scanner bed. I set the preferences to scan directly to iPhoto.
    Hope this helps.

  • Insert multiple images in one slide and setting dsiplay time for each

    Hi,
    I am using Adobe Captivate4.
    I could not able to insert multiple images in one slide and set display time for each image.
    Need help in this regard.

    This is not about background image.
    I have 3 images and want to insert in one slide only. I could able to insert image1 for first time, but could not able to insert image2 and image3.
    I have followed the same steps: Insert Menu>Image.

  • Multiple libraries for one ipod and match?

    Ok, so... I've got about 1500 songs purchased via itunes, and own about 3500 CDs, which I'm in the process of adding to my library.  All but about 50 of the discs were already ripped years ago, and I'm just copying the backup mp3s onto my new external drive after the last one failed.  Anyhow, I just got itunes Match and I'm wondering if I made a mistake in doing so.  Is there a way to have songs from multiple libraries on my ipod?  Due to the sheer volume of music (and other thigns) I own, I'm wondering if I should just make a comedy library, a blues library, a synthpop library, a metal one, a rock & roll one, an oldies one and so on.  If I do that, will I be relegated to having to decide what style of music I want on my ipod at any given time, or is there a way for me to load different items from multiple libraries onto the thing?
    I'm halfway tempted to just delete my entire library from itunes and just be SUPER picky about what tracks I add in order to be able to get under the 25K limit.  As is, right now I've got 21411 items in my library, over 20000 of which are in match, but it keeps crashing on step 3 right now.  As is, I already know I need to re-mp3 some of the discs since when I did them originally they were less than 96K (oddly, I'm finding it's mainly on my "oldies" discs like the American Graffiti soundtrack), and that doens't bug me, but the idea of having to go through song by song and add only what I want is one I'm not too fond of and that I'd like to avoid if at all possible.
    I'm really digging match, but not so much now that I realized there's a hard limit to the number of songs available.  I don't think Apple is used to folks like me who live & breathe music and attend well over 100 concerts in the average year.
    Thanks for anyone who's read all of my rambling, and any of y'all who can provide me a bit of guidance!
    -Ann

    This would be making is WAY less difficult. This is a MUCH needed feature in iTunes that they should add. As a DJ I absolutely hate having all my music in one library. Certain genres, like Electronic music, deserve to be in their own library. I would like to be able to hit the Music icon on my iPod and have it ask me what library of music I would like to access.
    This would allow siblings to share one iPod and not have to combine all of their music together. Or you could make a library of music with no explicicit music on it (and passcode it) so that you don't have to worry about kids having access to your explicit material if you let them use your iPod.
    You can already make multiple libraries in iTunes, why not just add the obvious next step and be able to add multiple libraries onto one iPod.

  • Multiple entries for one album and tracks are diveded between entries

    After adding all my music into iTunes I have some albums listed multiple times with one or two tracks listed in each one. How can I get all the tracks for that album listed all together? Also is there any way to import album art from another program. Windows media player has all the album art and iTunes is missing about 40 percent of them?

    Well, I tried everything in that article and when all my albums are in cover flow view multiple albums covers show for that one album. When I type in the album name, it narrows down to 1 CD.
    As far as not being able to retrieve album artwork, I just do a google image search. After I have saved the pictures I go to the info for any song in that album and add it to artwork.

  • HT1495 Using multiple iPads on one computer and account

    How to set up multiple iPads one one computer and one account?

    Not a problem since each device is distinguished by a unique name and has its own sync settings for apps, music, photos, etc.

  • HT1495 Multiple logons for one computer and multiple devices trying to use one itunes account.

    I have one computer with a logon for Kids and one for Adults.  There is a touch and nano that was added to a single itunes account tied to my email on the adult logon and the shuffle that is on the kids account.  I can't seem to get the multiple devices access to all the songs with out erase and re-sync error message when not using the right device on the assigned logon to the computer - why and can we change this?

    It sounds like each Windows user has it's own iTunesLibrary.itl file.  If that is the case, then you are correct, the correct device must be connected when logged in with the correct login.
    If all Windows logins share an iTunesLibrary.itl file... then it does not matter which login is used or which device is connected.

  • Can I use multiple IDs for one iTunes and multiple devices

    We have one family computer with iTunes, my older brother has an iPhone and I have an iPhone. A family ID was previously used to purchase songs for the family to share. My older brother has created an apple ID for his iPhone, and l have a yet unused apple ID. my brother downloaded songs etc onto the family iTunes that I would like to share, there are songs on the family apple ID that we would both like. Can you download purchases from multiple apple IDs into one iTunes  account, then sync that data onto multiple phones that each have a separate ID? Is iTunes linked to one ID? Can purchases from multiple IDs be grouped together in our family account. Also do I Actually need a separate Apple for my iPhone to prevent private messages and contacts being shared?
    Thanks for any advice

    I forgot to add my iPhone is brand new and unused, and also that the iTunes account has non purchased songs on there. Can these be shared. As it is a new computer the purchases from the family ID have not been downloaded yet

  • PSC 1210 Mac OS 10.6 Scan multiple pages into one pdf., and ink levels

    Now that I upgraded my Mac OS to Snow Leopard (10.6.8), I have needed to scan on my HP all-in-one psc 1210 either from Preview or from Scan & Fax in System Preferences. Once I scan a page and that page opens up, I AM able to scan additional pages, but each becomes a separate document. The only system driver available from HP is print only and also doesn't include a utility to check ink levels. Can someone help me with these two issues? (1) how to scan multiple pages into a single pdf. doc with my configuration, and (2) how can I check ink levels
    This question was solved.
    View Solution.

    Hi C_Maier,
    I can not see the available options when it is disconnected. A screenshot when it is connected would be best. I have done some research though, and believe the option to select 'save all pages to a single file' may only be available if your printer has a document feeder, and of course as you know, yours does not
    I know with 10.7 and higher the option is there even with flat bed only printers. You might consider upgrading the OS.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Why can I not print multiple files to one sheet and create a PDF of that format via Print dialogue on Mac? Very important part of workflow!!!!

    Try this if you use mac.
    Create a multiple page PDF. Three pages.
    Go to print.  - Multiple pages per sheet so that you see all three pages on your sheet to be printed.
    At this point, on a windows machine, you can print this as a PDF.  On Mac, it only lets you save as PDF (Not with the format selected).
    WHY has this functionality been removed from the Mac version of Acrobat XI??? Adobe?

    Jon,
    Unfortunately, Rave's response is quite incorrect on two major points.
    The Adobe PDF PostScript printer driver instance was indeed part of the Macintosh version of Acrobat Pro until a few years ago.
    However, it was NOT Adobe that killed the feature. Apple did! In one of the MacOS updates, Apple fully removed the capability that Adobe had to support this virtual printer. There was nothing that Adobe could do about this, regrettably. Adobe didn't cripple anything. Complain to Apple!
    However, Adobe does provide a replacement for it that will yield similar results, but it is not available in Acrobat or Adobe Reader!!! In most applications' print dialogs (such as Word) - which printer you select is irrelevant, click on the PDF button and select the Save as Adobe PDF option. This will save your document as a PDF file with Adobe technology. But again, this is not available from with Acrobat or Adobe Reader.
    However, you should note that the process that you previously followed and you would like to continue to use is commonly referred to as “refrying a PDF” and is strongly discouraged even where it continues to work under Windows. Why? The print function of Adobe applications including Acrobat and Reader is optimized for PostScript for printing, not for creation of PDF. Resultant PDF files have lost any transparency (it has been flattened) and all color management has been lost.
    What you are really trying to do is to create a pre-imposed PDF file from an existing PDF file. Going through PostScript was and still is a very bad idea.
    There are some third party plug-ins to Acrobat, such as Quite Imposing (Quite Software, <http://www.quite.com>) and PDF Snake (<http://www.pdfsnake.com>) as well as some “free” (you get what you pay for) solutions you can look up on the web that can do PDF imposition without ruining your PDF via PostScript.
    Hopefully this can assist you.
              - Dov

  • Measuring of Text with Multiple Fonts in One Single Line

    I am following a request to write C++ code for a label that contains several text elements in one single line, varying by font, size, color.... Ok, that can be done easily in GDI+ by measuring each element's width and then execute a DrawString
    for each of the text elements starting at its calculated position.
    So far, I failed miserably.
    The horizontal text positions did not appear to be correct. I reverted now to very simple text width measuring tests where the results are still puzzling.
    Test 1 (GDI+): Use of MeasureString
    With the same font, the width of the string "MM" does not match the double with of the string "M". This cannot be explained with eventual rounding problems.
    Test 2 (GDI+): Use of MeasureCharacterRanges
    Used the same font as for the first test. The width of "MM" is now exactly double of the width of "M". But: The width of the "M" ist lightyears away from the measurement result in the first test.
    Test 3 (GDI): Use of GetCharABCWidthsFloat
    Attempted to create a GDI font as close as possible to the GDI+ font in the previous tests. Unfortunately, this third test shows results which do not match the previous results at all.
    I am appending the full example here; the results I found during the debug session have been added as comments:
    void ApplWindow_TextDrawTest(HDC hDC)
    Gdiplus::Graphics *G = new Gdiplus::Graphics(hDC);
    G->SetTextRenderingHint(TextRenderingHint::TextRenderingHintClearTypeGridFit);
    Gdiplus::StringFormat MyFormat;
    MyFormat.SetAlignment(Gdiplus::StringAlignment::StringAlignmentNear);
    MyFormat.SetFormatFlags(Gdiplus::StringFormatFlags::StringFormatFlagsNoWrap);
    Gdiplus::Font TextFont(L"Calibri", 36, Gdiplus::FontStyle::FontStyleBold, Gdiplus::Unit::UnitPixel);
    const wchar_t *Text1M = L"M";
    Gdiplus::PointF TextOrigin1M(0, 0);
    Gdiplus::RectF TextBounds1M;
    const wchar_t *Text2M = L"MM";
    Gdiplus::PointF TextOrigin2M(0, 50);
    Gdiplus::RectF TextBounds2M;
    //--- Test #1: using MeasureString ----------
    G->MeasureString(Text1M, (INT)wcslen(Text1M), &TextFont, TextOrigin1M, &MyFormat, &TextBounds1M);
    G->MeasureString(Text2M, (INT)wcslen(Text2M), &TextFont, TextOrigin2M, &MyFormat, &TextBounds2M);
    //--- Results: Text 1 Width= 44.414 ("M")
    //--- Text 2 Width= 76.828 ("MM")
    //--- Test #2: using MeasureCharacterRanges ----------
    Gdiplus::Status RCode;
    Gdiplus::RectF LayoutRect(0, 0, 1000, 100);
    Gdiplus::Region RegionsList[3];
    Gdiplus::CharacterRange CRanges[3];
    CRanges[0].First = 0; CRanges[0].Length = 1;
    CRanges[1].First = 1; CRanges[1].Length = 1;
    CRanges[2].First = 0; CRanges[2].Length = 2;
    MyFormat.SetMeasurableCharacterRanges(3, CRanges);
    G->MeasureCharacterRanges(Text2M, (INT)wcslen(Text2M), &TextFont, LayoutRect, &MyFormat, 3, RegionsList);
    RCode = RegionsList[0].GetBounds(&TextBounds1M, G); // Result: Text 1 Width = 32.000 ("M")
    RCode = RegionsList[1].GetBounds(&TextBounds1M, G); // Result: Text 1 Width = 32.000 ("M"; the second char)
    RCode = RegionsList[2].GetBounds(&TextBounds2M, G); // Result: Text 2 Width = 64.000 ("MM")
    //--- Test #3: using the good old GDI ----------
    int MapModeResult = SetMapMode(hDC, MM_TEXT); // MM_TEXT is equivalent to Unit::UnitPixel?
    HFONT TextFont3 = CreateFont(36, 0, 0, 0, FW_BOLD, false, false, false, ANSI_CHARSET, OUT_TT_ONLY_PRECIS, CLIP_DEFAULT_PRECIS, CLEARTYPE_QUALITY, VARIABLE_PITCH | FF_DONTCARE, L"Calibri");
    HGDIOBJ PrevFont = SelectObject(hDC, TextFont3);
    ABCFLOAT ABCCharData;
    BOOL RFlg = GetCharABCWidthsFloat(hDC, (UINT)'M', (UINT)'M', &ABCCharData); // Results: abcfA = 2.000; abcfB = 22.000; abcfC = 2.000
    //--- End of Test ---
    delete G;
    Does anybody have an idea why I get so different results?
    Thanks in advance.

    This is a development question and should be directed to a forum that assists in coding. The forum you posted to is for Windows 7 related questions.
    Sorry I cannot help you
    Don't forget to mark the post that solved your issue as &quot;Answered.&quot; By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

  • Multiple exams in one project and variable

    Hello captivators,
    How do I make a captivate project with multiple exams. And with variables (widgets) that I need in the whole project.
    In the intro of the project you can select a character. That selected person is the visual coach (different branding) for the course.
    The student needs to through an intro module, next he can choose 6 parts of the course.
    One part = intro,n * show me, n * practice me, 1 * exam.
    The student needs to follow 1 part to the end. And then return to the intro.
    1st option: one project
    I can’t seem to make multiple examns with multiple results
    2nd option: multiple CP’s
    Then I have problems with the variables that are only known in one CP (SWF)
    3th option: Aggregator
    Then I can’t make condition. And I can’t hide the captivate menu when exported. I need conditions.
    HEEEELP Please,
    Koen

    I've not tried something like this to advise on whether it's possible in Captivate natively...but you've seem to have looked at all options and not found it possible. If that's the case, then perhaps the best option is to make the 'aggregator' in Flash, where you load each related CP file as the condititions are met. It's definitely possible to do, as one of my colleagues always uses his own 'Flash Shell' for this sort of thing. Possible for you, and ok in the project constraints?
    Erik

  • SRM MDM - store multiple pricing for one entry and have it select the price based on a users site

    I've had an interesting request. We have a region where they have one supplier who will support some products for multiple sites. The sites are in different cities and so the pricing varies based on the location of the user. I know how to do price scaling in SRM MDM but wasn't sure if there was a way to have one part that could someone pick the right price based on the user. I don't think this can be done since we don't pass any "user" information in the OCI connection.
    Has anyone run into this scenario and was there some other way to not duplicate the entries or create a separate view just because the pricing was different for the same product but different site? I'm open for suggestions. I'm looking to make long term maintenance of the data as easy as possible.
    We are still running SRM MDM 5.5 SP6
    Thanks,
    Cathy

    Tom,
    Check if the below given link can give you some lead.
    http://help.sap.com/saphelp_NW04/helpdata/en/dc/dc7614099b11d295320000e8353423/content.htm
    Thanks,
    K.Kiran.

  • Combining multiple databases into one in the physical layer

    I have several databases in the physical layer that I would like to combine into one database. How can I do this safely without interfering with the existing physical joins in the physical layer and the column mappings in the BMM layer ?
    Can you recommend the best procedures to follow in order to get this accomplished?
    Boniface Ntawutarama

    hi Boniface,
    I think so No,you cant combine all databases into single one.Actually why you want to do this?
    According to the requirement you select a database and concerned tables to build the repository,same way with other databases also you build RPD and establish joins in physical layer
    Lets wait for any more specific answers on this from experts.
    By,
    Kranthi.

Maybe you are looking for