Multiple functions not working after upgrade to Yosemite

We have an iMac (see specs below) that I upgraded to Yosemite a few weeks ago. We have had no luck launching Safari or the App Store. In fact Chrome is the only browser that will work since the upgrade. Another weird issue is when we go to Youtube it wont load any videos? Everything worked great with Mavericks and I not sure if there is a way to fix my Yosemite issue? I'd appreciate any and all feedback.
Regards,
Greg
Here's the specs on my machine:
iMac (21.5-inch, Late 2012)
Processor: 3.1 GHz Intel Core i7
Memory: 8 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GT 650M 512 MB

Hello Michael Dixon2,
Thanks for using Apple Support Communities.
In order to troubleshoot this issue where the optical drive does not accept discs, please follow the steps below.
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Apple Computers: Troubleshooting the slot-loading SuperDrive - Apple Support
Cheers,
Alex H.

Similar Messages

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

Iphoto Not Working After upgrading to Yosemite

I am unable to use iPhoto after upgrading to Yosemite.
I have two apple id and when I used one of them i get the message This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled'. I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
I can't use iPhoto and the iPhoto library to does not work

I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
Sign out of the App Store and then sign back in with the other Apple ID.

Thunderbolt ethernet not working after upgrading to Yosemite

After a very long and frustrating 2 days I have managed to upgrade my MacBook Air (13 Inch, Early 2014) to Yosemite. I have the official Apple thunderbolt to ethernet adapter but System Preferences/Network reports that the cable has been disconnected. It has not and other devices connected to the ethernet cable work fine. Any suggestions to get it working? Anyone else having the same problem?

I have a similar problem. My Macbook Pro Retina 15" (1st generation) can no longer connect to my university network through a Thunderbolt-to-Ethernet adapter since upgrading to Yosemite. (Actually, OSX 10.9 on a different machine altogether also has the same problem -- tested and verified.) I tried multiple dongles and multiple Ethernet cables, and finally called our tech support. We found a workaround for the problem by purchasing a USB to Ethernet adapter, but this now means that instead of a single device chain leading into the laptop, I am now using multiple ports. I hope a patch for this is in the works.

USB headset does not work after upgrading to Yosemite

I upgraded MacBook Pro 13" retina to Yosemite and lost Logitech PC Headset 960 sound.
System preferences shows it in input and output, but no sound.
After I plug in and out headset I loose even internal sound for Spotify.
When headset is plugged in Youtube videos on Chrome stops playing, when I take them out - video resumes.
Hardware should be ok, because I have 2 pairs of such headset (both of them are not working) and the same hardware on Windows 7 (bootcamp) do work with headset perfectly.
Have anyone the same/similar problem. Does anyone has solution? Should I migrate back to Maverick and how to do it?
Already reset everything what was recommended to reset etc.

1. System Preferences > Sound> Sound Effects
Play sound effects through:
Select Logitech/headphone and then back to "Selected sound output device".
2.Launch iTunes and play a song through headphone and adjust the volume.

Kodak printer will not work after upgrading to Yosemite.. Please Help

I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this?

I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

Hp laserjet cp2015dn not working after upgrading to Yosemite

After upgrading to OS X Yosemite 10.10.3 my HP Laserject CP 2025n printer is not working. It worked perfectly in the old system. I have tried deleting hte printer. Then when I add it back on it gets to the steps wher it says Setting up HP Color Laserect CP2025dn and it stalls (it stays at this step for more than 3 minutes) . It says "Setting up the device" In this window I have two options configure or cancel. After waiting 5 min I selected connfigure but this does not work.
I tried turning it off/on before trying a second time, this did NOT work.
I checked for new drivers, there are none. I seem to have the latest.

OS X Yosemite: Reset the printing system

Headphone jack is not working after upgrade to yosemite

My headphone jack was perfectly ok till i was using Mavericks. However as soon as i upgraded to Yosemite the headphone jack stops working. I am not 100% sure that the software update has caused the issue but it is likely.

I had the same problem and chatted with tech support and they told me to reset the PRAM and SMC which did not fix the issue. After contacting them a second time I was told my computer needs to be repaired. Which is not the problem it is a software issue.
What finally fixed it was (this was done after resetting the PRAM and SMC):
* Note: you can try this first and maybe it will solve your issue if not reset the PRAM and SMC then do the following.
1. Open system preferences
2. Chose sound
3. Chose Output then headphones
4. With headphones plugged in I checked the mute box on the bottom right and unchecked it they worked.
Then when unplugged the speakers didn't work so I did the same but choosing the internal speakers
OS X Mavericks: Reset your computer’s PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Hope this helps others!!

Logitech USB Speakers not working after upgrade to Yosemite

After upgrading my MacBook Air to Yosemite, my Logitech Z305 USB speaker no longer work. In fact, it isn't even recognized in the Output list in Sound in the System Preferences. It worked nearly all the time with Mavericks, with an occasional need for a system reboot if no sound was coming out, but it was always displayed under the Output tab regardless.
I just killed the coreaudiod process in the Activity Monitor, but this didn't do anything of note.
Any ideas of what has to happen for these speakers to work again?
Here are the system specs:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfa
FaceTime Camera (Built-in):
Product ID: 0x850a
Vendor ID: 0x05ac (Apple Inc.)
Version: 6.46
Serial Number: CCGBCM031JDL8LLX
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa200000 / 3
Current Available (mA): 500
Current Required (mA): 500
Built-In: Yes
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfa100000 / 2
Current Available (mA): 500
Current Required (mA): 2
Built-In: Yes
BRCM20702 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa110000 / 5
Current Available (mA): 500
Current Required (mA): 94
Built-In: Yes

I zapped the PRAM and SMC, but that did nothing. https://discussions.apple.com/docs/DOC-3604
The speakers are still not recognized, nor do they work.

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

Photon plus not working after upgrading to yosemite from mavericks

I upgraded to yosemite. Now my photn plus is not working. Please solve my problem.

HI
some apps are not working anymore with yosemite and sometimes you have to buy it (server apps case) or just upgrade it from appstore (iPhoto,... Case)

Wireless Keyboard functions not working after upgrade

I have a HP Pavillion Elite m9080a desktop with a wireless keyboard 5189URF Running originaly on Vista but last week I upgraded to Windows 7 Home Premium. My problem is that the feature buttons on my keyboard are not working ie no volume control, CD/DVD controls not working, typing is ok. Also the caps lock / number lock icon is not appearing on the task bar. Also on my Monitor w2207h the two USB outlets are not working either. I need help please to restore these functions.

Yes.. its for windows vista.. run it with recomended settings..
if it dosent work then try following..
go to your device manager and see can you see some devices named " unknows devices"
if yes then >
Try following some steps
go to your device manager > right click on unknown devices > go to Properties > then Details tag
select from drop down list called Hardware ID's (PCI\VEN...) Copy it via right click...
and search it according to it on google or any serch engine you will get the right drivers..
here are the print shoot of process!
Hope it helps!
**Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
**Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**

Pinch open and close function not working after upgrade

I'm having trouble with the pinch open and close function on my trackpad. It was working fine until I installed the new Google upgrade and now it doesn't seem to be working. Any suggestions. The other functions are working fine.

Click on the Apple icon at the top left of the screen. Select "System Preferences", then "Trackpad".
Be sure to select:
"Pinch Open and Close" in the "Two Finger" Menu...
Sly

Cd not working after upgrading to Yosemite

The cd drive in my iMac (2010) quit working after installing Yosemite

I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
Sign out of the App Store and then sign back in with the other Apple ID.

Automator not working after upgrade to Yosemite

I created a fairly simple Folder Action within Automator in Mavericks that went like this;
1) Receive file in Folder e.g Folder 1
2) Move file from Folder 1 to Folder 2
3) Label file Red
Now I cannot get anything to work in Automator since upgrading to Yosemite, I've tried rewriting it as a new workflow, and even creating new simple ones such as move file from a to b, and nothing is working.
If I run it from within Automator, it works fine, but doesn't do it automatically outside of Automator.
Has anyone else had this problem? So far, for this and a number of other reasons Yosemite is nothing but a waste of time.

The same problem here.
I tried do the same as you but it looks like the Automator don't "check" defined folder and therefore don't start. Accessibility for Automator is checked.
My workflow file:
Get Folder Contents
Filter Finder Items
Move Finder Items

Multiple functions not working after upgrade to Yosemite

Similar Messages

Maybe you are looking for