Multiple FXS ports on a 3745 to the PSTN

Hi,
I'm putting together a spec to have 35 FXS ports routed directly to the PSTN via an ISDN PRI.
Can anyone foresee any issues with doing this with a 3745, fitted with 3 x NMHDA-4FXS + 3 x EM-HAD-8FXS + appropriate PWDM2 mods + NM-HDV-E1 (or AIM-MFT VWIC?) + appropriate IOS image?
This would be a standalone system (e.g, not controlled by a CallManager), and all the phones will need dedicated lines. And each port will need to be able to generate a line reversal signal.
Any input on this would be appreciated.
Cheers,
J.

You can go through the following document and check whether the current IOS version supports it .
http://www.cisco.com/en/US/products/hw/routers/ps282/products_data_sheet09186a0080091ba1.html

Similar Messages

Aggregating multiple fiber ports on MDS directors

Hi All,
Going forward our new servers will have the capability of aggregating multiple fiber ports into fewer connections on the SAN switch. I am told that there is a particular setting that needs to be enable on the switch for this functionality to work, kindly let me know more details on this?
What we intend is to reduce the port usage on Cisco MDS9509 like in map in many hba's to few physical ports instead of one to one?
regards,
Samir

Switch-Server port channeling feature was added in MDS NX-OS 4.1(3). Make sure your MDS at least runs that release.
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/pc.html#wp1291942
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/pc.html#wp1209658
Regards,
Roman

HT1688 Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Hello csmithhisler,
Congratulations on your new iPhone 5c! I am sure you are eager to get your new iPhone set up, but sounds like your iPhone is not appearing in iTunes. I recommend following the steps in this article to troubleshoot the issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

Multiple Input Ports on BAPI to submit at the same time

Hi
I have looked at previous threads and still not getting this right. When I click the submit button I need it to all go to the BAPI at the same time.
I'm using BAPI SalesorderCreatefromdat2, I need to use at least three input ports.
I have done the following.
-dragged the bapi on the page
-selected the ports required, flipped a port of required
-the for ports I have created 1 form (Order Headr I n Port), 2 tables (Order Itmes In port, Order Partners Port).
-the have connected the form and tables to the bapi, so have three different lines.
-For each one the eventname is *SubmitAll
-Then there is one button,on the action tab I selected custom action,the name is SUBMITALL, Apply To is Self
Is the above correct??
Please let me know, thanks in advance

Hi Basheer
Thank you for your reply.
I have changed the buttons to Action Type "System Action", the field System Action to "Submit Form", the Apply To is "Self"
I however get the error "Please enter sold to party or ship to party"
Can you please help me. I have changed my BAPI to use SalesorderCreatefromdat1 like yours.
I'm using the following input ports and fields
-Order Header in form, using fields DISTR_CHAN, DIVISON, DOC_TYPE, SALES_ORG
-Order Partners Table in table, using fields PARTN_NUM and PARTN_ROLE
-Order Itmes Table in Table, using fields MATERIAL and TARGET_QTY.
Is this correct? Thank you for the response.

Can multiple PCs access one remote panel at the same time?

I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
"LabVIEW: Serial port receive buffer overflow.
LabVIEW: The network connection was refused by the server."
My question is: Can multiple PCs access one remote panel at the same time?
Thanks in advance!
Y

Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

Cisco 2432-24FXS Calls won't ring FXS ports when placed in Huntgroup

Hi,
I am having an issue getting calls to ring through on the FXS ports when using the "trunkgroup" command under the POTS dial-peers. Calls will ring through fine if I use the "port" command under the pots dial-peer. What I am trying to accomplish is getting a single number to hunt through 13 FXS ports in a round-robin fashion. With the below setup I am getting a SIP 404 not found message in the SIP debug info. I am not sure if I am missing something here or what the deal is. If the below information is not enough I would be happy to provide additional info. Any idea's why this configuration doesn't seam to work?
trunk group HuntGroup1
hunt-scheme round-robin both up
dial-peer voice 1 voip
translation-profile outgoing 7to11
destination-pattern .T
progress_ind setup enable 3
no modem passthrough
voice-class codec 1
session protocol sipv2
session target dns:XXXXXXXX
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
no vad
dial-peer voice 300 pots
trunkgroup HuntGroup1
description TEST NUMBER
destination-pattern XXXXXXXXXX
voice-port 2/0
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 1
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/1
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 2
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/2
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 3
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/3
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 4
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/4
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 5
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/5
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 6
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/6
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 7
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/7
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 8
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/8
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 9
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/9
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 10
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/10
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 11
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/11
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 12
station-id number XXXXXXXXXX
caller-id enable
voice-port 2/12
trunk-group HuntGroup1
timeouts interdigit 3
description HuntGroup 1 Line 13
station-id number XXXXXXXXXX
caller-id enable
Message was edited by: Thomas Schmidt
Added CCSIP Debug and Router Config.

Hi.
Can you please attach the complete config and a debug ccsip message?
Thanks
Regards
Carlo
Sent from Cisco Technical Support iPhone App

How to submit data from multiple Input Ports in single SUBMIT button click

Hi,
I am in SPS8.
What exactly steps I need to perform to submit data from multiple Input Ports.
I couldn't able to submit One input Form and one Input Table to BAPI data service in single SUBMIT button click.
I debugged the VC application in SPS8.
While debugging, I found that when I click the SUBMIT button in the Input Form, Only data in that Input
form are being passed to the BAPI, But not the Table Form data.
If I click on the SUBMIT button in another Input Table, Only data from that table is being passed to the BAPI, but not the Input form data.
Essentially I need to submit both of them in one SUBMIT button.
Thanks,
Ramakrishna

Ramakrishna,
From the word document that you sent to me the steps you are missing to map the appropriate information into the BAPI is first you are not mapping all data rows into the table input port. To do this double click on the input table view and change your selection mode from single to multiple. Then when you click on your link between the BAPI and your input table you will see a new option appears under data mapping "Mapping Scope" select All Data Rows.
That's the first part of the problem to get the BAPI to recognize both the inputs coming from the form and the table eliminate the submit button from the form. Drag and drop a link from the output port of the table view to the Input port of the BAPI. Double click on the link between the BAPI and the table view and open the expressions editor for the two fields:
1/ Automatic Source
2/ SKIP_ITEMS_WITH_ERROR
On the hierarchical folder structure on the right expand expand the Data Fields node to find the fields from the form and map them accordingly.
Now when you hit the submit button on your table it should pass the BAPI all the parameters from both the form and the table.
Hope this helps,
Cheers,
Scott

SPA9000 Configuration Issue with FXS Port(s)

Successfully configured SPA9000 PBX with two VoIP providers setting Voice->Line 1/2 parameters. One phone set is connected to FXS 1 (or FXS 2) port and able to chose the proper VoIP provider when making outbound calls.
Issue is that once outbound call is established, SPA9000 is not responding to additional numbers dialled for called party extension number. Same issue when dialling a number where voice prompt answers the call offering selection of activities to be chosen by dialling specific number. None of the entered selection works as nothing is entered on the dial.
Located in Canada. VoIP providers: freephoneline.ca & callcentric.com
SPA9000 configuration:
Software version: 6.1.5; Hardware version: 1.0.5(a)
Voice -> SIP -> PBX Parameters -> Call Routing Rule: (<:L1>9xx. | <:L2>8xx.)
Voice -> SIP -> PBX Phone Parameters -> Phone Dial Plan: ([89],[3469]11S0 | [89],1[2-9]xxxxxxxxxS0 | [89],011xx. | [89],xx.)
Voice -> FXS 1/2 -> Dial Plan: ([89],[3469]11S0 | [89],1[2-9]xxxxxxxxxS0 | [89],011xx. | [89],xx.)
Voice -> Line 1 -> Dial Plan: (<9:>xx.)
Voice -> Line 2 -> Dial Plan: (<8:>xx.)
Voice -> Regional -> Call Progress Tones:
Dial Tone: 350@-19,440@-19;10(*/0/1+2)
Second Dial Tone: 420@-19,520@-19;10(*/0/1+2)
Outside Dial Tone: 420@-16;10(*/0/1)
Prompt Tone: 520@-19,620@-19;10(*/0/1+2)
Busy Tone: 480@-19,620@-19;10(.5/.5/1+2)
Reorder Tone: 480@-19,620@-19;10(.25/.25/1+2)
Off Hook Warning Tone: 480@-10,620@0;10(.125/.125/1+2)
Ring Back Tone: 440@-19,480@-19;*(2/4/1+2)
Confirm Tone: 600@-16;1(.25/.25/1)
SIT1 Tone: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT2 Tone: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
SIT3 Tone: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
MWI Dial Tone: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding Tone: 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication Tone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone: 350@-16;*(.1/.1/1)

Hi @sglumac, it seems that your SPA9000 is a Cisco product. Please repost this to this link: https://supportforums.cisco.com/ for solutions.

CLID not shown on FXS port

I am using Call-manager 6.0.1b, a MGCP controlled Gateway.On the Gateway i have installed a NM-HD-2V with a Vic2-2FXS module. On this module i connect 2 analog phone with capability to display the Caller-ID. When i call the analog port from a ip phone or from the other analog phone the Dn is not shown. When i connect the phone directly to the PSTN and dial this nr via my cell phone the nr is shown so i expect that the nr format received is not correct. How can this performed that the correct format is shown to the FXS port connected phone ?

Hi,
Yes - you are correct. Looked at this one too quickly.
You will want to make sure the CPTONE defined on the port is for the country the phone is manufactured for, and that the voice-pport has the 'caller-id enable' command.
If those are both correct, and I'm guessing that they are since some caller-id works, then you need to inspect the gateways that take the calls to begin with.
Do you have caller-id trouble for internal calls also?
How do these calls come into your network?
hth,
nick

Multiple Input ports - Single Form

Hi,
I have a RFC which has multiple input ports. How do i use a single form to provide data to all the input ports.
Regards
Bharathwaj

Hi,
you can create the single form direct, if you pull a line out of the RFC, then the form must be created with the fields. If not, then you have to create it manually and map the fields with the input port.
Best Regards,
Marcel

CFwd on FXS-Ports (mgcp)

hi!
How can I forward the Calls on an Phone witch is connected to an FXS-Port (mgcp, vg200)?
How can I use the other Features, like PickUp etc.
vy Markus

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

FXS Ports & Pickup Groups

Is there a way to make an analog phone connected to an FXS port a part of a call pickup group that contains both analog phones & IP phones? I setup a lab and used MGCP to add the gateway and I was able to add the DN associated with the FXS port to a call pickup group. However, I am unable to figure out how to answer the call from the analog phone when another IP phone in the call pickup group is ringing.
Thanks in advance

Hi
You are going down the right track with this.
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde5372/0#selected_message
See this other post I made (for a different purpose, but the principal is the same - it just opens up features available to IP phones for FXS ports by registering them using SCCP).
Regards
Aaron
Please rate helpful posts...

Restricting FXS ports to internal calls only

Hi,
I have recently intalled Call Manager 8.5.1 with a H323 Gateway. On the gateway, I have a number of FXS ports for lobby phones. Is there a way I can restrict these phones to allow only internal calls only? Do I need to use COR lists like in Call Manager express or is there a more practical way?
Thanks,
Derek

Hi Derek,
It sounds like these FXS ports are NOT registered to CUCM 8.5.1? If they aren't, then yes COR lists is the most pratical way to do this. You could do a "connection plar xxxx" to a receptionist extension and her her/him forward the calls to the correct extension.

MGCP FXS ports requires a license in CUCM9

Hello!
I am connecting Some analoge phones to VG350 FXS ports which is configured as a MGCP Gateway in CUCM. I beleive MGCP did not requires any license for it. Can some confirm this ? is there any Cisco doc on it ?
Thanks & Regards,

Hi Sambit,
Technically u are correct but legally I think u would be requiring license.
even the ordering guide says Analog devices are supported with Essential USer license and must be purchased through UCL.
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/finalcopy.pdf
regds,
aman

Groupwise Mobile Issue - multiple SOAP Ports

Hi All,
I'm having an issue with Groupwise Mobile.
I've got multiple POAs hosted on the same server (using different ports), and GMS can only access one of them. The one that it can access is using the standard 7191 SOAP port.
Is there a trick to get mail to pass across another port? Users can authenticate, but synchronization doesn't work.
Thanks,
Matt

Originally Posted by mikebell90
There used to be a known issue with soap that if you had multiple poas
on the same ip, you could only access one
It seems to be working now. But I'm not sure how I fixed it.
To complicate things, I think I was suffering from two separate issues that presented themselves as one problem.
One of the changes I made was to install GWM as a trusted app, rather than using user based authentication. This seemed to help GWM access POAs with SOAP ports other than 7191.
The other "issue" I had seemed to "heal" itself. The user account I was using to troubleshoot this showed up with the following message in it's inbox:
Syncing resumed - password resupplied
Your password was resupplied, and Intellisync Mobile Suite is now syncing normally again
...so I'm assuming that GWM was caching bad authentication data. I just couldn't seem to get this data to flush out, even after deleting and re-adding the user in GWM, cycling services, and rebooting servers.

Multiple FXS ports on a 3745 to the PSTN

Similar Messages

Maybe you are looking for