Multiple gateway on the same network with VPN

Dear all,
i have problem of multiple gateway with VPN, please refer to the attached pics:
PC B cannot ping PC A if PC A's gateway is not pointing to the VPN Router
if i change the PC A default gateway to 192.168.1.2 ( VPN router) , then PC B can ping it. but the fact is we have to keep the default gateway stick to 192.168.1.1 . is the any way to make it happen ?
Thx

Hi,
Can you add static route on Linksys router 'ip route 192.168.2.0 255.255.255.0 192.168.1.2' and give a try..?
hth
MS
**Rate helpful posts**

Similar Messages

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!

Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
The only thing different is I just moved, but I have the same router/phone/internet provider.
I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
Thanks!

If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.

Multiple Apple TV's on the same network with airplay issues.

I work at a school with 37 Apple TV's. They are all on the same network, some of them are wired while others are wireless. The problem I am having is that airplay works and then doesn't work for some unknown reason. The Apple TV's are connected to the network and internet when they are experiencing this and I believe that the issue is bonjour. Does anyone know any way of solving this issue.

Yeah, I think wiring them is the only solution to this problem.
We've only got three (well, had one and bought two more this summer - that's when the trouble started).
The first one I got had trouble connecting with the wireless network, so Apple support said to reboot the main router. That is, shut down the entire network while we reboot for one Apple TV. So...OK, I get it, Apple is a CONSUMER company and we're trying to use their products in a school...in spite of that, so far, it has been worth the effort.
But YESTERDAY I got that message about too many devices on the network and to "disconnect a device..." (you know the rest).
So, I called Aruba, knowing that it was a wireless issue and that I've had issues with them and, particularly
Bonjour. Aruba appears to be a Windows only network - would that I would have known that three years ago. But Aruba TAC has NO CLUE what the issue is. So I called Apple Tech Support and they have NO CLUE - weren't even aware of this posting, what, six months ago? (Shows you how much they read and value the forum - we're on our own, boys and girls!)
So...I wired the front of the school Apple TV to a nearby wireless access point and now it's a steady as a rock. But prior to that I actually stood in front of the ATV and watched as it connected, then disconnected, then connected, then disconnected (ad nauseum). Interferrence? Well, maybe, there are only about 150 rogue networks detected in the immediate vicinity - but Aruba ASSURED ME that their WAPs were sophisticated enough to recongnize that and filter them out. (Maybe not?)
So the ATV at the front of the building ocassionally just drops off the network. I can tell because we run a Flickr slideshow on it all day long with announcements and stuff. When I go by the TV and see the thumbnails and no slideshow, I know it has dropped off the network. Usually I can reconnect it. But that's not good enough.
Finally, yesterday, a teacher called me who has an ATV (long story on how she got that) and said she was not longer connected to the network. A shudder ran through my body as I expected (and realized) the worst.
So, my installer is coming tomorrow to wire her ATV into the WAP in her classroom. But TODAY, I have to call Aruba and enable the additional port since it's not enabled by default.
I'll tell you, every day, I get this horrific feeling in the pit of my stomach that this whole world of technology we have built is held together with bailing wire and duct tape and that it just has to blow at some point.
Then I watch Bob Ross do his paintings (and a NEW KID on the block - watch out for him - Kevin Hill - this kid takes Bob Ross to the next level and he's only 18 years old) and think - "What the heck am I doing here, anyway? Why am I not home painting?" But them I start feeling guilty that I'm leaving the school in the lurch. Who will stand up to these bozos who don't have a clue what's going on and, further, don't seem to care, yet, get this, think they are doing a GREAT JOB! I'm telling you, I'm living on Superman's Planet Bizarro!

Multiple Users Mounting the Same Network Share?

Hello, first time posting...
I'll cut right to my main question: Is it possible, on OS X v10.3.9, for multiple users to simultaneously connect to the same network share?
Here in my office, we have a single Mac that is used by multiple people throughout the day. It has two accounts on it, 'Communications' and 'Studio'. 'Communications' is an Admin account that is used by a co-worker who spends the most time on the Mac. He created the no-limitation 'Studio' account for the rest of us to use.
There is a certain Windows network share that we both frequently use. We've found that if one user connects to the share first, the other user will not have access to it; using 'Go -> Connect to Server' will result in the share being greyed out in the list, and the share will not show up in the Finder.
However, there is one way around it. If Studio connects to the share first and then Communications (the admin account) attempts to make a connection of it's own *through a shortcut on the dock*, then a 'clone' of the share will be created on Comm's desktop, with a "-1" after the name (though it might be some other number).
This may sound like I've answered my own question, but what I'm looking for is a way for the non-Admin account to access the share after the Admin account already has (so that we don't have to log-in and disconnect Communications everytime Studio needs to manage files on the share).
We have Thursby Software's DAVE installed on the Mac, but I'm not sure how it fits into all this.
Any thoughts, suggestions or advice?
Thanks.

Bizarre. It turned out I could merge them, but only in to the mapped drive - L: - and only by explicitly clicking on the drive icon - if I typed L:\series in to dialog box it converted it back to \\nas\share\series... Not helpful.

Multiple Scopes for the same subnet with Cisco CNR

I have a requeriment from my internal client that he wants to have multiple scopes within the same /21 subnet , but he wants to have different scopes for each group of servers ( in the /21 subnet).
We have 2 Cisco CNR ( I dont know the version they are running because they are managed by an external vendor) but they are in active / standby mode.
My question is .. it is posible to make the CNR have different scopes (ranges of IP's) for the same subnet ( /21) and assign those based on the client ( I dont know what criteria can be followed .. maybe Mac Address ???).
I appreciate any help or pointing to the right documentation
Thank you in advanced

I don't know that you would want a separate PO print. You can print the same PO print twice to provide a copy for the freight vendor. I think it should be okay as long as it is clear that the PO is with the vendor for the products but there is a condition specifying the freight deal. The second vendor (say the freight vendor) should be okay with this PO as well. I don't remember how the standard SAP PO forms handled the vendor condition but it should be enough I would think. I never came across a separate PO for freight since it is usually an value added service that is an integrated part of shipping goods and the paper-work usually is leveraged from PO, bill-of-lading, etc. SAP will make it difficult if you do need a separate PO since there is no way to use account assignment to material and therefore would need to manually account code and invoice verification, post to a clearing account in FI for re-class to material or charge to internal order with settlement to material or something like this.
I would just make sure that the PO print makes sense in terms of being able to see the freight charge and maybe the vendor name or something (look at the standard SAP PO form to see what the best practice is).

Multiple windows of the same class with a different argument

Suppose I have a main window with a list of users. If I click on any one user, the "chat window" should open with the argument as that "user".
If i click on another, a similar "chat window" should open but with a different user.
I can't have so many stages because I don't know how many users are there.
How do I open multiple windows of the same class but with a different argument?

Here is a sample (opens, at random locations, a bunch of child windows parameterized by color).
Could be simpler, but hopefully you get the gist.
import java.util.Random;
import javafx.application.Application;
import javafx.geometry.Rectangle2D;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.layout.StackPane;
import javafx.stage.*;
public class ColoredStages extends Application {
final String[] colors = { "firebrick", "palegreen", "azure", "chocolate", "goldenrod" };
final Random random = new Random(42);
Rectangle2D screenBounds;
public static void main(String[] args) { launch(args); }
@Override public void start(Stage stage) {
    screenBounds = Screen.getPrimary().getVisualBounds();
    stage.setTitle("Primary");
    stage.setScene(new ColoredScene("cornsilk"));
    stage.show();
    for (String color : colors) {
      Stage coloredStage = new ColoredStage(stage, color);
      coloredStage.show();
class ColoredStage extends Stage {
    ColoredStage(Stage owner, String color) {
      super();
      initOwner(owner);
      initStyle(StageStyle.UTILITY);
      setX(screenBounds.getMinX() + random.nextInt((int) screenBounds.getWidth()));
      setY(screenBounds.getMinY() + random.nextInt((int) screenBounds.getHeight()));
      setScene(new ColoredScene(color));
class ColoredScene extends Scene {
    ColoredScene(String color) {
      super(new StackPane());
      StackPane layout = (StackPane) getRoot();
      layout.getChildren().addAll(new Label(color));
      layout.setStyle("-fx-font-size: 20px; -fx-padding: 30px; -fx-background-color: " + color);
}

Time Capsule and Extreme on the same network with different roles

I've just bought a new Time Capsule device which replaces my slightly older Airport Extreme Base Station. The TC is attached directly to my broadband modem via ethernet. This works fine. I want to use the old AEB as a 'print server', in other words a device I can plug printers into to enable wireless printing. This is because the printers are in a different place to the telephone line in.
With the TC running on its own, everything works fine. But as soon as I switch on the AEB, I get errors up on screen such as "IP Configuration; 91.84.115.158 in use by 00:1f:f3:3e:95:6d, DHCP Server 192.168.1.1". Alongside this error message (which occurs every 30 seconds) the internet connection frequently cuts out and comes back online by itself. Also, some computers are connecting to the AEB instead of TC for an internet connection. It's chaos!
I have tried TC in various wireless modes such as "Participate in a WDS Network". Likewise I have set the old AEB in "Bridge Mode" for internet connectivity and the WDS is set as a remote. It seems I can only have one on and not the other. I have tried using different radio channels too without much luck.
I have looked through the designing Airport Networks manual, but the illustrations have an AEB before the TC whereas my network is the other way round.
Can anyone point out where I might be going wrong or offer some design advice / good links?

I've done a hard reset of both devices and swapped them over vice-versa. The problem seems to be the network will only support a SINGLE device. In Airport Utility I can only get one of the two devices to show in the sidebar, rarely both devices are temporarily present. I've configured both to use the same network names and WPA passwords in the hope they will 'merge' together onto the same network. But one just seems to cancel out the other.
Right now I've go the old AEB plugged back into the modem and its working. But the new TC device which I've plugged into the printers wont show on the network and has the amber light flashing.

TS2972 I have multiple libraries on the "same computer" with two different desktops, can't I share between two libraries on the same computer?

I'm trying to use home sharing to share content between libraries so some of the combined content in a given library, can be synced to an ipad. Instad of having mulitple computers, i have multiple libraries on the same computer using two desktops. How do I share within the same computer?

iTunes must be running for home sharing to work. There is no way to have home sharing running simultaniously for two users on the same computer.
Simply add the media files using File > Add File/Folder option in iTunes.

How can I connect my mobile device on the same network with my printer

I have pictures on my mobile device but I am unable to print them on my HP Photosmart plus printer. I was wondering how am I able to make sure that my printer and my mobile device is on the same network so I can print my pictures or either be able to save them to my memory card?

Hi,
Are you talking about iPad, iPhone ?? If YES then please check your printer on this list,(updated on 15Dec2011) it must be an AirPrint enabled printer to be able to print from iPad, iPhone. If YES (again), you can use AirPrint on your iPad to print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Multiple printers on the same network problem

I have 2 HP OJ Pro 8600 printers and one HP OJ Pro 8500 Plus printer on the same network. My question is whether it is possible to change the network name of these printers so that it is easier to identify them.
The printers are in three different buildings so there is little stress to run around to find out where the print comes.

Hi JObbern
If all the printers are on the same network you won't be able to change the network name on the printer.
You can change the name of the printer though on each computer. Depending on the operating system you are using, go to the printers window, right click and rename. Example Office1, Office 2.
If the option isn't available you can go to the printer window and add a printer and change the printer name through the wizard.
Hope that helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I merge multiple instances of the same network share?

In my (large) Lightroom 5.2 (Windows) library I have three instances of, essentially, the same network share (a Drobo NAS) which appear separately in the library.
One appears as Share (\\nas) L:, one as \\nas\Share and one as \\nas\share. The contents of the share are spread randomly across the three - so one might contain the folders series\event1, series\event4 and series\event5 and another series\event2, series\event3 and series\event6.
Is there an easy way to convince Lightroom that they're all the same physical location and merge them in the library? No amount of dragging, dropping, importing or synchronization seems to have had any effect so far!
Guy

Bizarre. It turned out I could merge them, but only in to the mapped drive - L: - and only by explicitly clicking on the drive icon - if I typed L:\series in to dialog box it converted it back to \\nas\share\series... Not helpful.

WLC-2106 and multiple interfaces on the same network

Hi there,
I recently created a TAC request to the Cisco support regarding our WLC-2106, but they could not help me. Basically I just learned that you can create new interfaces for the wireless LAN controller and then dedicate them to a given wireless network (SSID). This way I could more effectively utilize network bandwidth also. Problem is that all of the interfaces have to be in a different network segment in order to work, which is not what I want. I specifically want to have several interfaces on the same network segment.
Has anyone tried to accomplish the same?

Basically what I've misunderstood is that all the traffic generated by our wireless clients have been going through the single 100Mbit/s ethernet port on the wireless LAN controller (management interface), and to mitigate this I thought I could create new interfaces (ports) and dedicate those to given WLAN networks.. I see now that this is not supported. Not inside the same network at least.
So, by reading further and consulting my best friend Google I learned about a setting called "AP Mode". Changing that from Local (the default) to H-REAP the APs should not route their traffic anymore through the management interface on the wireless controller, but instead route all the client traffic directly to the local LAN. This way you effectively remove the 100Mbit/s bottle-neck when all the APs were using the management interface both for configuration and client data traffic.
It seems you also have to enable H-REAP Local switching from a given WLAN network in addition to changing the AP Mode of your access points to H-REAP. I'm still in the testing phase here so should anyone have any insight to this, I'd be greatful to hear more.

Airplay from Multiple Sources on the Same Network

Hi,
I have a question that I was hoping someone could answer. I recently upgraded to iTunes 11 and bought a B&W A7 Airplay system. It works fine (bar the odd drop out). My question is, if I buy another A7 for another room and someone else in my house on the same network wants to airplay music from thier iOS device to that speaker whilst I am using iTunes to play music through the speaker in my room will that cause a problem?
In other words, can you have 2 different speakers recieving an airplay stream from 2 different devices?
Thanks in advance.

Hi JObbern
If all the printers are on the same network you won't be able to change the network name on the printer.
You can change the name of the printer though on each computer. Depending on the operating system you are using, go to the printers window, right click and rename. Example Office1, Office 2.
If the option isn't available you can go to the printer window and add a printer and change the printer name through the wizard.
Hope that helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I use multiple accounts on the same Mac with Apple TV2?

I have home sharing turned on in two separate accounts on a single MacPro. When I am logged into both accounts, I can see both accounts' iTunes Libraries available in the AppleTV2. However, when I try to open each account iTunes Library in the AppleTV2, only one account will open (whichever one I logged into first). (In other words, I log into Account1 then open iTunes with Home Sharing On, then log into Account2 (while Account1 is still logged on), open iTunes with Home Sharing On. AppleTV2 shows Account1 Library and Account2 Library under Computers, but will only load Account1 Library. Account2 Library will just cause AppleTV2 to search for the Library then give an error.) How come AppleTV2 can see both Libraries but will only open one Library? How can I fix this?
Thanks,
zpockets

Thank you for replying. Both of the accounts are Admin accounts. The Libraries are kept in the user/music/itunes/itunes media folder on each account. However, I do use multiple iTunes Libraries on my Account1. One of the Libraries I use in Account1 is on a separate internal HD. However, the other Libraries I use in Account1 are stored in user/music/itunes/itunes media folder on the main HD (which hosts both Account1 and Account2). It doesn't seem to matter whether I am using an iTunes Library on an external drive or the main drive in Account1, I still get the same problem: only account1 library will load. AppleTV sees that the Account2 Library is there, but it won't load it.

Multiple gateway on the same network with VPN

Similar Messages

Maybe you are looking for