Multiple GR with Same inspection lot

Hi QM Experts,
In a standard system, when we take GR of same material for two different line items of PO or two different POu2019s, inspection lot created for each GR post with different batch number.
But what we want is one inspection lot for all of this GR and same batch number, because we make only one inspection for the goods received with same batch.
Can any expert suggest idea about this thing, thanks a lot.
Gkude

hi
better you post this question in QM forum
check following settings
SPRO-->Quality Management --> Quality Inspection ---> Inspection Lot Creation ---> Define Default Values for Inspection Type
here under control key check options of Control of Inspection Lot Creation (Lot Summary)
here try specifying value of for each material document.....
regards
kunal

Similar Messages

  • Multiple notification against single inspection lot (03 inspection type)

    Dear friends
    While recording the defects multiple times against single inspection lot (03type) , all the defects are added in single notification, but my client requirement is they want different notification.  if any body knows please tell me.
    Note : in inspection type there is a option of multiple notification against single inspection lot, but this is
    not working (i think it will work only serial number,equipment and  functional location get changed)
    Please do the needful
    Regards

    Hi Karthikeyan
    As you mentioned it is not possible to create notification  other than based on the object types.
    A work out can be make an action box in the notification for creating another notification with the help of ABAP ( call transaction QM01) and while doing this the entire datas of the inspection lot gets copied into the notification. you may have to use a user exit also.
    Defect can be recorded in the item level by the user.
    Sounds difficult but certainly possible
    Regards
    gajesh

  • Multiple notifications for an Inspection lot

    Hello
    I  would like to create one notification by defect  keyed for an inspection lot .
    If I work with serial numbers I can create one notification by defect
    If I don't use serial numbers , all defects are linked to a single notification even though I remove the tick  for "One notification by Inspection lot " in the Inspection lot category customizing ?
    I would like to know if there is a way to do that.
    Thanks for your help
    Regards
    Regis

    It seems this link has got some useful replies:
    Multiple notification creation for defects recorded during UD
    Also other similar discussion:
    Multiple notification against single inspection lot (03 inspection type)

  • Read multiples files with same extension

    how to read multiples files with same extension in java.
    for ex : i would like to read all .DAT files from C drive using java.
    How is it done

    - You create the filter
    - You get the list of files
    - You open and read each file.
    For the first two above you look at java.io.File and listFiles(FileFilter filter).
    For the third you find whatever input stream is appropriate from java.io.*

  • Multiple accounts with same email

    I have multiple accounts with same email
    The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
    When I try to reset my password, it only keeps asking me to change my FB password
    Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
    I am only interested in the one that originally connected to my FB as it has all my contacts
    As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

    Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
    I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
    I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

  • Multiple members with same alias

    I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

    Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

  • Mounting multiple directories with same name on different severs to a single mount point on another server

    We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
    The files in these directories will be different.
    These same name directories on multiple severs has to be mounted to a single directory on another sever.
    We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
    Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

    You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
    No sure if this works. If this works, then you will have in this case just an additional level in the tree.

  • Multiple accounts with same email can't acces original account

    ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the  password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.  

    Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
    I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
    I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

  • Quality Certificate Issue with multiple batchs with same delivery note

    Hi,
    Hi,
    My Company Business Process:
    Quality certificates are generated prior to the good receipt through IDOC process.
    When we  receive the goods, GR should look for existing quality certificates and trasnfer the inspection results to inspection lot.
    When we are trying to receive for single batch & delivery note, It is looking for existing quality certificates. There is no problem in this senario.
    But when we receive the multiple batchs with the same delivery note, system is generating new quality certificates. It is not looking for existing QC which got generated through IDOC process. This is the actual proble.
    Note: I am not sure is standard SAP does not supprot  to receive the multiple batchs with the same delivery note or not at the time of GR. Please advise me.
    Thanks,
    Suman

    In data origin in certificate profile SAP supports " mix the origins within a characteristic. For example, the results data can originate from an inspection and the specification data can originate from batch determination."
    Now here question arises Is batch determination of one batch or multiple bacthes took place against a single delivery note.
    As per my understnading it should be one batch with is supported in std SAP.

  • Bridge CS4 won't output to pdf multiple images with same filename

    Hiya...my googling efforts have thus far failed!
    I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3.  Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
    The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place).  So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice.  And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
    I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway?  It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
    The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc).  But I've tried using the standard bridge templates and it does the same thing.
    http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
    Any help would be appreciated...even if to tell me that I am being unreasonable!
    UPDATE 16/11/09
    Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
    Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
    Message was edited by: djtun71 (16/11/09)

    When I click import from disc I am asked to choose a disc and then I get this message:
    The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
    This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
    Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

  • Multiple images with same filename-how does iphoto deal?

    I recently lost a several pictures from iphoto on my imac running snow leopard. I have tried multiple things with the guidance of a senior advisor from apple, but the pictures are not retrievable. I have multiple backups for many, but I lost about 20 images. Naturally, I am a bit paranoid now about the stability of the remaining photos in my 66gb library, so have made multiple backups of the entire library and plan to migrate to aperture 3 with a vault.
    It just struck me though, that because we use multiple cameras with the same canon file naming scheme, I have several instances where I have multiple photos with the same filename. Is this potentially a problem, or because the EXIF info is different for each one, am I okay? If this is a problem, do any of you have any remedies? I plan on adjusting the naming scheme on our cameras for the future.
    Thanks in advance!

    To add to Terence's reply: the only time you might run into a problem is when you might try exporting photos with the same file name to the same folder on the HD. If that were they case you could batch rename the photo's titles with Photos->Batch Change->Titles to Text with the option to add a sequential number at the end of the file name, i.e. Text - 001.jpg, etc.
    Another alternative would be to upload each new shoot to a folder on the desktop and rename them with a renaming app likeName Mangler or Renamer4Mac . I rename them with the date taken and a brief description: 2009-05-10-MomsDayBalboaPark-001.JPG. You also could add an identifier to the description to tell which camera it came from.
    This method will avoid any name conflict down the line and make it easy to identify photos as to their general content when used outside of iPhoto. I've found that a little extra effort up front has saved me a lot of problems on down the line.

  • Podcast synching on multiple macs with same account

    How do I get my podcasts to synch on multiple macs and therefore ipods with same itunes authorized account, ie the subscriptions I have on home computer don't show up on my work itunes account and therefore when I'ved watched flying one way, when I land I want to load the next set of episodes, but find the need to create entirely new subscriptions?
    Thanks
    george

    I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
    I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
    Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

  • Material document posted on the same inspection lot but using another batch

    Hi, May I request your assistance with regards to our issues on iinspection lot For this inspection lot, there were three movements created. When doing Usage Decision, it is reporting that there are still remaining quantity 13,332.413 LPA open in the inspection lot using batch X But checking in MMBE, the amount is in batch Y and there is no remaining qty in batch X. can you help me UD the inspection lot? Thanks, sara

    Hi Sarah,
    In UD screen, there is a message next to "insp End Date" that is " Actual Quantity of lot is greater than lot quantity". I guess, actual quantity has been changed using transaction QAC1.
    Kindly check for corresponding entries in MB51.
    There might be inconsistency between QM and MM stock.
    Use Sap Note 48815 and check for any inconsistencies.
    Amol.

  • To create multiple files with same content but with different names

    Hi SapAll.
    here i have got a tricky situation on Idoc to File Scenario.
    in my interface of an Idoc to file ,there  is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
    which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
    so here for now iam using one reciever file communication channel.
    can any body give me the quick answer.
    regards.
    Varma

    What do you mean by different names?
    when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
    You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
    If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
    Do not use a BPM!
    Regards,
    Abhishek.

  • Topic: Incorrect Tag:Multiple Attributes with Same Collection Type

    I have an Object Type that contains multiple attributes with the same collection type. When I use OracleXML getXML to generate xml, the tag for all elements created for any of the matching types is the tag for the 1st of the similar attributes.
    work_t_v is an object view of a relational schema
    SQL> desc work_t_v
    Name Null? Type
    WORK_ID NUMBER(38)
    TITLE_OF_WORK VARCHAR2(512)
    MESH_HEADINGS MESH_HEADINGS_T
    AUTHORS AUTHORS_T
    COMMENT_ON WORK_REFERENCES_T
    COMMENT_IN WORK_REFERENCES_T
    ERRATUM_IN WORK_REFERENCES_T
    REPUBLISHED_FROM WORK_REFERENCES_T
    REPUBLISHED_IN WORK_REFERENCES_T
    SQL> desc work_references_t
    work_references_t TABLE OF WORK_REFERENCE_T
    Name Null? Type
    REFSOURCE VARCHAR2(255)
    NOTE VARCHAR2(255)select
    work.work_id,
    work.title_of_work,
    work.comment_on comment_on,
    work.comment_in comment_in,
    work.erratum_in erratum_in,
    work.republished_from republished_from,
    work.republished_in republished_in
    from work_t_v work
    where work_id = 99350984
    results in tag of <comment_on> for all the elements built from the work_references_t type (i.e., there are no <comment_in>, <erratum_in>, <republished_from> or <republished_in> elements)
    sample result is:
    <COMMENT_ON>
    <COMMENT_ON_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
    </COMMENT_ON_ITEM>
    </COMMENT_ON>
    <COMMENT_ON>
    <COMMENT_ON_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
    </COMMENT_ON_ITEM>
    </COMMENT_ON>
    <COMMENT_ON>
    <COMMENT_ON_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
    </COMMENT_ON_ITEM>
    </COMMENT_ON>
    <COMMENT_ON>
    <COMMENT_ON_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
    </COMMENT_ON_ITEM>
    </COMMENT_ON>
    <COMMENT_ON>
    <COMMENT_ON_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
    </COMMENT_ON_ITEM>
    </COMMENT_ON>
    The above xml should be:
    <COMMENT_ON>
    <COMMENT_ON_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
    </COMMENT_ON_ITEM>
    </COMMENT_ON>
    <COMMENT_IN>
    <COMMENT_IN_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
    </COMMENT_IN_ITEM>
    </ERRATUM_IN>
    <COMMENT_ON>
    <ERRATUM_IN_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
    </ERRATUM_IN_ITEM>
    </ERRATUM_IN>
    <REPUBLISHED_FROM>
    <REPUBLISHED_FROM_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
    </REPUBLISHED_FROM_ITEM>
    </REPUBLISHED_FROM>
    <REPUBLISHED_IN>
    <REPUBLISHED_IN_ITEM>
    <REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
    </REPUBLISHED_IN_ITEM>
    </REPUBLISHED_IN>bracketed portion [] is contained within the refsource string to indicate what type of reference it should be displayed as.
    I also found that if I use the -withDTD parameter to include the dtd, the dtd includes the appropriate elements (comment_in, erratum_in, republished_from and republished_in). However, it incorrectly defines refsource and note multiple times (once for each WORK_REFERENCES_T attribute).
    Are these known problems? Will they be fixed? I'm more concerned about the XML problem than the DTD problem.
    Thanks! -- John Butler
    null

    Using the version of XML SQL Utility that comes with the next XSQL Servlet release 0.9.8.6 I did the following:
    create type foo as object (a number);
    create type foolist as table of foo;
    create view fooview
    as select
    cast(multiset(
    select sal from emp where rownum < 2)
    as foolist) list1,
    cast(multiset(
    select sal from emp where rownum < 2)
    as foolist) list2
    from dual;
    When I request a "SELECT * FROM FOOVIEW"
    through getXML I get:
    <?xml version="1.0"?>
    <ROWSET>
    <ROW num="1">
    <LIST1>
    <LIST1_ITEM>
    <A>800</A>
    </LIST1_ITEM>
    </LIST1>
    <LIST2>
    <LIST2_ITEM>
    <A>800</A>
    </LIST2_ITEM>
    </LIST2>
    </ROW>
    </ROWSET>
    So this appears fixed in the next code drop.
    In the interim, I'll email you the new JAR file until (since it won't be on OTN for a few more days).
    null

Maybe you are looking for