Multiple groups of the same genre

Ok I just synced my Iphone with my library and when I went to my music I selected genres and there are two hip hop/rap catagories. What happened during my sync and can I possibly fix it?

reset your dock preferences. delete the file homedirectory/library/preferences/com.apple.dock.plist and log out/in. your dock, spaces and exposé will be reset to the defaults. see if the problem goes away.

Similar Messages

How can multiple files for the same genre be consolidated

I organize my iTunes files in genre folders for easy access. ITunes creates multiple folders for some genres and allows a single (preferred) genre file for other much larger files. How can I consolidate multiple files with the same genre?

Thanks. I've done what you selected. The problem is that despite all files being identified with the same genre, iTunes groups some genres in two separate folders. Thus, I have two "Country" folders, for example. More perplexing is that iTunes groups my largest genre folder, "Jazz", in a single folder.

Multiple entries for the same genre in iPod, but iTunes is fine

In the Genre list in my iPod, there are several copies of a few genres -- for example, there are like 4 or 5 "Dance" entries under Genres.
Each duplicate genre contains the same songs, and the total number of songs in my iPod matches iTunes. So why there are there multiple Genre entries, and how can I get rid of them?

A spelling or punctuation mistake, or sometimes a trailing space usually causes this after the artists and/or song/genre name, which fools the iPod into thinking that there are two different artists or songs/genres. The trailing space is the hardest to spot.
Best way to cure this is to go into iTunes, highlight that artist and/or songs, right click on them and select "get info".
This brings up the multiple song info window. If you see the "artist" field (or in your case, the genre field) is left blank, then there is a discrepancy with that name.
So to correct this, in the artist or song box retype the name, as you would like it, and then click ok. You should do this even if no mistakes are immediately visible.
Re sync this new artist/song info to your iPod.

How to fade groups of images or multiple images at the same time?

I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how to fade these groups and multiple images at the same time.
Thanks!

Use TweenMax for this.
the syntax is like this:
var arrayOfDisplayObjects:Array = new Array();
//with arrayOfDisplayObjects.push(DisplayObject)
//you can put any DisplayObject in the Array and when you want to fade them call this
TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
//to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

How can i select some row from multiple row in the same group of data

I want to select some row from multiple row in the same group of data.
ColumnA
Column B
1 OK
1 NG
2 NG
2 NG
3 OK
3 OK
I want the row of group of
ColumnA if ColumnB contain even 'NG'
row , select only one row which Column B = 'NG'
the result i want =
ColumnA Column B
1 NG
2 NG
3 OK
Thank you

That's some awful explanation, but I think this is what you were driving at:
DECLARE @forumTable TABLE (a INT, b CHAR(2))
INSERT INTO @forumTable (a, b)
VALUES
(1, 'OK'),(1, 'NG'),
(2, 'NG'),(2, 'NG'),
(3, 'OK'),(3, 'OK')
SELECT f.a, MIN(COALESCE(f2.b,f.b)) AS b
FROM @forumTable f
LEFT OUTER JOIN @forumTable f2
ON f.a = f2.a
AND f.b <> f2.b
GROUP BY f.a

CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

Hi all,
is that possible to open multiple reports at the same time, like sheets in a excell file ?
Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
The application is in asp.net with VS2010 and CR2010.
The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
thanks !
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

I'll make the suggestion to the Program Management group.
You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
Ludek

HT1473 How do I get iTunes to download an entire album in one file versus splitting it into multiple files with the same Album Title?

I have added several CDs to my iTunes files, several Albums were added in the form of multiple files of the same Album title with random songs listed, but not the entire album in one file.
I have tried to reassemble the Album into one file, but could not find a way to do so.

Generally setting a common Album title and Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2

How can I remove multiple copies of the same song from the iTunes listing?

How can I remove multiple copies of the same song from the iTunes listing. The program seems to be picking up the same songs from, for example, my user area and my public area in the C drive

As above, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library, however it is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve/merge ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Accessing multiple portals at the same time?

Is it possible to access multiple portals at the same time?
For example, what I want to achieve is different properties (layout,
portlets, look & feel) for different groups of users accessing the same
portal. The Associated Groups part on the Portal admin page is not
fulfilling our requirements. So we decided to have different portals for
different groups of users, all working through one portal, and accessing
their custom portals. Is this achievable?
What we are thinking is: put the common functionality in the repository
portal directory, and the custom portlets/jsps in the group-specific portal
directories. This way we can customize portal behavior for different groups
of users. Is this achievable?
Thanks.
Amit

You have to user respective DRILL commands present in WAD to configure the drill operations on multiple characteristics...

Multiple devices with the same GUID

Hi,
According to the Zenworks Command line utilities reference https://www.novell.com/documentation...a/bb15p2z.html
There exists an option to register a device with a new GUID by doing the following...
register (reg) [-g] [-k <key>] [-u <username> -p <password] <ZENworks Server addressort>
Registers the device in a Management Zone.
You can use the following options:
g - Lets you create a new device object with a new GUID and password for the device if you have multiple devices with the same GUID. When you register a device by using this switch, all the associations (policies and bundles) assigned to the original device object are removed. You cannot use this option to create a new GUID for a Primary Server or a Satellite device. The local user must have Local Administrator rights to use this option.
I would like to know if it is possible to have such a command line option for the agent installation. So built into the agent installer, a command line option to force the agent to register with a new GUID.
We are having CONTINUOUS problems with the above scenario. When we move devices from one computer lab to another and re-image the device, Zenworks keps trying to assign the same GUID to the device and this mixes up our Dynamic Workstation groups, which then affect the applicable policies to each device.
I would like to know if there is an option to tell the installer to stop remembering the GUID and simply register the device with a new guid on agent installation.
This way we can build that into the post imaging scripts which install the zenworks agent.

Hi Craig,
OK, I've had a look at the ZCM Reconcile rules and run a few tests to see if it is possible to get the machines not to reconcile (use a new GUID after imaging).
As I have explained before, sometimes this result is desired in our case especially when we move machines around from lab to lab.
So far, no matter what configuration I use, I cannot get Zenworks to generate a new GUID for a device that is getting re-imaged (without doing so only after the fact by unregistering the machine and reregistering the machine via the zac und and zac reg -g).
We use dynamic workstation groups to assign policies and bundles to machines so reconciling the devices is not necessary most of the time. We need an option to tell the machine to register with a new GUID on installation of the agent. Surely such an option can be built into the agent installer?
The options in the ZCM config management "reconcile settings" I tested with are:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Unticked/Unselected
Enable Differentiation - Unticked/Unselected
I then also tested:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Ticked/Selected
and also:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Unticked/Unselected
With all three different configurations, I re-imaged the same machine, which renames the machine via the first post imaging installation script to match the DNS name. Thereafter the Zenworks agent gets installed, which then renames the machine back to what it was registered into the Zenworks database with on first installation.
We need a method of telling Zenworks NOT to reconcile when we want it to. It should not reconcile every time and thereby rename the machine netBIOS name.
Is there any way to achieve this?
Originally Posted by CRAIGDWILSON
Quite Simple,
Let's say a HDD Dies and you replace it.
All you need to do is bring down an image and the machine will come back as it was with all the same WS and Device associations.
The same thing could apply if bringing in new Hardware.
If a new computer were to replace an old computer but the name stayed the same, everything could be automatic depending on the rules setup.
It is all a matter of how you tell ZCM to reconcile devices.
The Help in the ZCC under these items should explain how it works so you can setup your rules to meet your use cases.

ITunes 11... I have multiple artists with the same album name... how do i have them show up as separate albums?

I have itunes 11 with iTunes Match on 2 Macs and 2 ios devices... I know it all has bugs... but I have been ok.
I am wondering how to show my library in the column browser view when I have multiple albums with the same names? I have noticed on my ipod in my car that an album titled "Christmas" plays and includes 2 different albums titled christmas... and in itunes it lists them both when not in the artwork view... (I primarily use the column browser to navigate my library.
Just wondering if anyone else has experienced this/knows how to fix.
Thanks!

Various workarounds I can think of which basically involve playing around with tags. See which meets your needs or come up with others:
Give the albums slightly different names. For example, "Greatest Hits" [ABBA]"
Do the same but do it in the sort album field.
Add a bogus disc number to different albums. It may string them together still but at least they will be slightly grouped.

Use multiple themes in the same project?

I'm making a slideshow in iMovie 09. It consists of approx. 200 pictures. Those 200 pics are then broken down into 5 distinct groups. I've applied the Scrapbook theme to the first 40 pictures. I tried to apply a different theme (Filmstrip) to the next 30 pictures. When I did that, however, it changed the theme for the original 40 pictures to Filmstrip as well.
Am I able to use multiple themes within the same project? I don't think its possible.
Is my solution to make the 5 sections of the slideshow in iMovie 09 using a different theme for each section? I'd export as a movie file and then create the final slideshow that would consist of the 5 movies previously made (each with a different theme).
Thanks in advance. This project is due in 3 weeks.
Martin

This is not possible in iMovie (to use multiple themes).
However, you can do this using your idea of joining multiple movies into one. You can do this with QuickTime Pro, or with MPEG Streamclip. [Here is a video Tutorial by venerable forum member Jon Walker|http://web.me.com/jrwalker4/QuickNotes/MPEGStreamclip/Entries/2008/5/25_Tutorial015.html] which shows the MPEG Streamclip option.

Best practice for multiple instances of the same BEX query

Hi there,
I'm wondering what's the best way to use multiple instances of the same BEX query. Let me explain what I mean:
I have a dashboard with different queries feeding different period of time such as: week to date, month to date and so on. One query for each since it is based on a user exit.
For each query I want to show different data in different sections of my dashboard. Per example: sales per directors or sales per customer group, sales per day, sales per week and the like.I tried to connect a simple bar chart via a direct connection but with no success due to the multiple lines generated by the addition of the sales director, customer group, week number and so on.
My question is about the way to connect the different queries efficiently in order to show the different data while avoiding multiple useless lines.
The image above shows the query browser where, per example, for a Month to date query there will be mutiple line for each week as well as one line for each director. If, for two different components, I want to show data per week and data per director or other representation what is the best practice:
Add another instance of the same query and only put the week information and another one will only the director info?
Should I bind those to the excel file and use formulas to make final calculations?
Will there be a performance issues for adding different instances of the same query
I have 6 different queries (read 6 user exit that filters time via user exit).
Depending on the best practices there might be 4 instances for each for a total of 24 instances in the query browser.
I hope my question is clear enough, if not please do not hesitate I'll clarify as much as possible.
Regards,
Steve

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

Multiple Scopes for the same subnet with Cisco CNR

I have a requeriment from my internal client that he wants to have multiple scopes within the same /21 subnet , but he wants to have different scopes for each group of servers ( in the /21 subnet).
We have 2 Cisco CNR ( I dont know the version they are running because they are managed by an external vendor) but they are in active / standby mode.
My question is .. it is posible to make the CNR have different scopes (ranges of IP's) for the same subnet ( /21) and assign those based on the client ( I dont know what criteria can be followed .. maybe Mac Address ???).
I appreciate any help or pointing to the right documentation
Thank you in advanced

I don't know that you would want a separate PO print. You can print the same PO print twice to provide a copy for the freight vendor. I think it should be okay as long as it is clear that the PO is with the vendor for the products but there is a condition specifying the freight deal. The second vendor (say the freight vendor) should be okay with this PO as well. I don't remember how the standard SAP PO forms handled the vendor condition but it should be enough I would think. I never came across a separate PO for freight since it is usually an value added service that is an integrated part of shipping goods and the paper-work usually is leveraged from PO, bill-of-lading, etc. SAP will make it difficult if you do need a separate PO since there is no way to use account assignment to material and therefore would need to manually account code and invoice verification, post to a clearing account in FI for re-class to material or charge to internal order with settlement to material or something like this.
I would just make sure that the PO print makes sense in terms of being able to see the freight charge and maybe the vendor name or something (look at the standard SAP PO form to see what the best practice is).

Can I purchase multiple copies of the same song

I want to purchase multiple copies of the same song to avoid copyright issues if I make a mixed cd and give it away.

As above, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library, however it is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve/merge ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Multiple groups of the same genre

Similar Messages

Maybe you are looking for