Multiple Hard Drives (USB)?

I have a USB Hub (powered) and connected a USB Printer and USB HD...no probs. The Printer shows up as does the HD, and I'm off and running.
I added a new HD (2nd one) and the Airport Disk Utility doesn't see it at all. I can't access it.
But in the setup on Airport Utility (the new one), I see both new and old disks no problem. Shows name, size, size used, etc.
I just can't access the 2nd disk and I've unpowered and restated the Extreme twice since...green light.
What's to do?

I've tried the solution outlined, and it still doesn't see my other drives.
I've got a powered USB hub connected to the USB port on my Airport Extreme, and I have 3 USB drives attached to the hub.
When I first set this up, I connected only 1 disk, and everything worked fine, setup the password and worked as expected. I then added to the 2 additional drives, and it can see them in the Airport Utility, but does not show their drive names like it does the first.
I then went in and changed the password, allowed it to restart the Airport Extreme, and it still only shows the 1st disk.
Any other ideas?

Similar Messages

  • Wiki: Using multiple hard drives, LVM & encryption

    I have lately found myself with the issue of having multiple hard drives and wanting to do LVM stuff & encryption with while retaining maximum flexibility. After scanning through wikis, manpages and forum entries I came up with a solution for myself. The only thing I don't cover with it is mounting while booting as I don't need and can't test it.
    I want to share the knowledge I gained and help other people find a solution faster and so I wrote a Wiki entry (first on my user page). I would now like to hear the opinion of the community regarding the following questions:
    Do you see any security risks with my solution (especially the part on storing the unencrypted keyfile on a ramdisk)?
    Do you think this text is worthy for a wiki entry or should I keep it in the forums?
    Do you spot any errors (typing or else)?
    Would you improve this article anywhere?
    Of course, if you have further comments, I would like to here them as well. And now without further ado: Using multiple hard drives, LVM & encryption.
    Regards,
    javex
    P.S.: As a small side question: Is my user page a good playground for article creation or would you recommend some other area where to do this (since here noone else could improve the article while in this early stage)?

    mwmmartin wrote:
    I have a 1 TB hard drive; but I have a 500GB and 250GB usb external hard drives.
    Wouldn't it be cool if I could make the two external hard drives a RAID drive and use Time Machine to use all the 750GB of external memory to do my backups???
    You can, but I would +*strongly recommend against+* it. See +Concatenated RAID+ in the Help for Disk Utility.
    There are several potential problems:
    Depending on how much data is on your 1 TB drive, 750 GB may not be enough to back it up. See #1 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
    To set up a +Concatenated RAID+ set, both drives will be erased.
    When (not if) either drive fails, you'll lose all the data on both.
    Both drives must be connected any time you do a backup or want to browse your backups.
    Especially with USB, if one drive wakes from sleep, or spins up, quickly enough, but the other one doesn't, the backup may fail and/or your backups may be corrupted.
    For now, it looks like my only solution is to go buy a bigger external hard drive and spend more money,,,
    That's your best solution +*by far.+* Anything else is taking a large risk with your backups.

  • Multiple hard drives question

    Hi:
    I have multiple hard drives on my Mac Pro and I also have an iMac.  I currently have Photoshop CS5 loaded on both Macs using the Snow Leopard operating system.  Does anyone know if I try to load Photoshop CS5 on another hard drive on my Mac Pro swith Lion as the operating system, will that be considered like another "computer" and go beyond the two computers normally allowed?
    Herman R

    Does anyone know if I try to load Photoshop CS5 on another hard drive on my Mac Pro swith Lion as the operating system, will that be considered like another "computer" and go beyond the two computers normally allowed?
    To my knowledge the restriction for PS activation is per computer and not per drive or operating system. At least I was able to have an old and a new system on separate HD in my MacPro  with both CS5 able to run while also installed a version on my MacBook. All using Snow Leopard but I have no reason to believe this has changed for Lion.
    But you are always able to install PS on more then two computers, the only downside is that you first have to deactivate one of them and activate the version on another computer. And activating and deactivating is not much work, just select it in the  Help menu

  • External hard drive USB 2.0 OS 10.9.3 won't work now

    external hard drive USB 2.0 OS 10.9.3 won't work now

    Disconnect the external drive and reset the SMC, as per > Resetting the System Management Controller
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds. one minute.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    and reconnect the external drive.
    Then if the external drive fails to work...?
    1. Try a different cord.
    2. Try a different external drive.

  • Hard drive is full, how to make iTunes span multiple hard drives?

    My mp3 drive is full. How do I tell iTunes to use multiple hard drives? It seems to only want to deal with one.

    Hi, Mister Beefy.
    All you have to do is go to the iTunes Edit menu > Preferences > Advanced tab > General sub-tab and change the location of your iTunes Music folder.
    New files added to your Library will go to the new location, old files will remain in the old location.

  • How to work with database files on an external hard drive (USB 2.0 or 3.0)

    I have Oracle 11gR2 installed on my laptop. I would like to create a database instance on my laptop, but to put the datafiles on an external hard drive (USB 2.0 or 3.0). The external drive will always be attached to the laptop, whenever the database is used. This is going to be a development machine, just to develop a prototype. Laptop is limited to 150 GB on local disk and I want to have a 1 TB database on it. Can this be done with Oracle 11g for Windows XP SP2 ?
    I presume that a network attached storage NAS device would be better solution, but I cannot attach it on my LAN.
    Thank you,
    Milan

    Sure. You can put the data files wherever you'd like assuming that the external drive is going to be mapped to the same drive letter (I'm guessing your laptop is running Windows).
    Justin

  • Automated deployments of Windows 7 on systems with multiple hard drives

    Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives.  The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1.  Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port.  The bug is documented by Microsoft in KB937251:
    http://support.microsoft.com/kb/937251
    MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed.  And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
    The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART.  This will always return the disk that is connected to the lowest SATA port.
    To configure this in MDT2010, use the following steps (refer to the attachment):
    1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share. 
    2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
    3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
    4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
    5. under section [Default], add the following entries (see Rules.jpg)
        - UserExit=SystemDisk.vbs
        - DestinationDisk=#DiskID#
        - DestinationPartition=1
    Hopefully this info will help someone else!
    Attachments:
    MDT2010.zip ‏261 KB

    Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives.  The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1.  Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port.  The bug is documented by Microsoft in KB937251:
    http://support.microsoft.com/kb/937251
    MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed.  And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
    The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART.  This will always return the disk that is connected to the lowest SATA port.
    To configure this in MDT2010, use the following steps (refer to the attachment):
    1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share. 
    2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
    3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
    4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
    5. under section [Default], add the following entries (see Rules.jpg)
        - UserExit=SystemDisk.vbs
        - DestinationDisk=#DiskID#
        - DestinationPartition=1
    Hopefully this info will help someone else!
    Attachments:
    MDT2010.zip ‏261 KB

  • Is it possible to use multiple hard drives with iphoto?

    I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so, How do I set it up. I have tried importing to a external drive, but when I check the file path of the photos it shows my Imac hd in the address. I seriously dont know why I cant just add the external hard drive as a library and have Iphoto work, Help

    There are instructions - and not the caveats - on how to do what you want below.
    However, you'e not quite grasping iPhoto:
    I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives.
    When you do this, you're using the Finder (or file manager) to categorise the photos. All well and good, but why? That's exactly iPhoto's job. iPhoto is a database designed to help you manage your pics - including categorising them.
    Anyway:
    *How to do it:*
    Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
    *What Happens:*
    Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
    *Some things to consider:*
    1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    4. *Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.*
    My own opinion:
    I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
    If disk space is an issue, you can run an entire iPhoto Library from an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    If you really want to spread your photos across volumes like this, Aperture would be a better fit.
    Regards
    TD

  • Combining Multiple Hard Drives

    If I have a lot of data that needs to be split between multiple hard drives, is there any way of installing the drives but having the OS treat them as a single drive? The idea being that my file system would be just as easy to manage but I could have a huge amount of extra storage.
    I've read a bit about using a RAID 0 array in order to do this, but apparently this splits up individual files between the drives to make the system faster, so if one drive fails, you've lost everything.
    Is there a way of setting up the drives so that one drive is filled to capacity, then the second is filled and the third and so on? So it's just treated as one big hard drive without any file separation taking place?
    Any help appreciated,
    Thanks,
    Adam
    Message was edited by: AdColvin

    what drives & capacity do you have? are they the same - match with one another?
    RAID 0 "stripes" your data between a pair of usually matched drives - capacity, brand, model. 1TB drive + 1TB drive = 2TB of total storage. This makes things go fast, but isn't safe.
    RAID 1 "mirrors" the data between a pair of usually matched drives - capacity, brand, model. 1TB drive + 1TB drive = 1TB of total storage. This isn't fast but keeps data safe.
    RAID 10 combines both qualities above. it takes at least 4 drives, all identical, & is half of total storage. 4 x 1TB = 2Tb of total storage.
    SPAN is when you take a group of disks & "add" them together to make one big pool of storage. it's not safe nor fast. a drive falling out of the array can create data loss.

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

  • What is the Best way to consolidate projects from multiple hard drives?

    I am working on my first tv show. My team and I have been editing various clips on multiple hard drives. What is the best way to put all these different projects into one timeline while still maintaining the ability to edit individual "tracks"?
    xmls?
    omfs?
    Please help

    In project library > right click on project > consolidate media
    Also
    http://support.apple.com/kb/PH12706?viewlocale=en_US

  • Image Selection Rule Properties - Multiple Hard Drives

    How can I specify machines with multiple hard drives? I only see options for Hard drive size.

    On Thu, 06 Nov 2008 05:46:01 GMT, jayen wrote:
    > How can I specify machines with multiple hard drives? I only see
    > options for Hard drive size.
    only in the script I would say..
    Marcus Breiden
    If you are asked to email me information please remove the - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.didas.de

  • Connecting multiple hard drives to WRT160NL via usb hub

    I have a regular usb hub with 3 hard drives connected.  Will i be able to just plug the hub right into the
    WRT160NL, and therefor have all 3 hard drives connected wirelessly to the network?  Thanks! 
    -Jim

    Who has correctly answered this question?
    http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&message.id=146291#M...

  • Multiple Hard Drives for Video Editing with Premiere Elements 8?

    I'm using Premiere Elements 8 for video editing. These are the specs I'm using:
    The camcorder I used to shoot the footage is a Sony Handycam with  model number HDR-SR12. It's a digital HD video camera recorder that  shoots in NTSC 1920x1080i HD  recording. The footage was shot with AVC  HD  9M (HQ), which records in higher image quality mode. The  video  camera is connected to my computer through a USB cable.
    The  computer  itself is a Windows 7 desktop computer. The CPU is an HP  Pavilion Elite  HPE-150f PC with Intel Core i7-860 processor. I imported  the video into  Premiere by selecting "File" --> "Get Media From"  and then choosing the third  option from the top.
    My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    Even with the patch 8.0.1 that should be preventing crashing, the program keeps crashing upon startup with one specific video project. Using the exact same video files for that project, I recreated the video, with Elements, and never ran into the problem. Both times, I had the patch installed.
    At the moment, I am using only the single internal hard drive for everything (software, OS, video editing, etc.). It is 1 TB in size. However, I am informed that one hard drive is not recommended for video editing, and that I need at least two hard drives, one for OS and one specifically for video editing. I was also informed of FireWire 800 and eSata; however, it does not appear that my computer supports eSata.
    Can this problem be resolved if I have an external hard drive and connect it to my computer with FireWire 800 (which the computer supports)? If not, what can be done so this problem doesn't arise in the future?
    Thanks for the help.

    staring-into-space wrote: My import  option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the  specs of the camera I shot the footage with.
    When you import the footage is there a red line across the whole of the timeline?
    staring-into-space wrote:
     I recreated the video, with Elements, and never ran into the problem.
    As you have the recreated project working fine I'd be inclined to put this down as a one-off glitch. If it happens again on a different project then it may be more worrying. You may want to consider using save-as to create multiple versions of your project (note this does NOT duplicate the source clips - so you won't be eating up much extra disk space). You could for example use save-as to create a daily version - ProjectName-Mon, ProjectName-Tue etc....
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • How to use multiple hard drives with RnR??

    I am backing up my T61p's 500GB internal hard drives to an 750GB external USB. I just got a 1.5TB FreeAgent Seagate. I want to use that drive too to backup. I want to keep the backups that are currently on the 750GB. I simply want to *also* make a full backup to the 1.5TB. Is there an easy way to create multiple backups on multiple drives with Rescue & Recovery?
    Once you choose an initial destination (USB drive), there does not seem to be an easy way to start backing up to another drive. Did I miss something?
    Thanks,
    Michel

    Hello,
    Sorry you're having problems. Assuming you've already mounted the drive so that an external drive icon appeared on the desktop, what DO you see when you open it? ANY files?
    Did any of those "weird things" include okay/cancel windows?
    Is your external drive fat32, NTFS, or something else? OSX doesn't play nice with all types of partition types, so this information could help us help you.

Maybe you are looking for