Multiple hardware in Logic? Will it ever happen again?

I was just wondering if anyone out there has heard if Logic will be supporting multiple hardware boxes ever again.
For instance, you can have two MOTU 896's hooked up so you can have 32 inputs (using the ADAT inputs) at the same time. From what I've researched, it's a limitation of Core Audio and it was rumored that Apple was going to address it in OS 10.4 - well, maybe 10.5?
Anyone got anything to share?

It is a pain in he proverbial,but it's for the best,ultimately.PCI-Express is far superior. I'm really not prepared to fork out £1200 for a Magma breakout box. Yes,Wormhole I'm aware of,and am looking at.I expect it to work OK. This might be the time fot me to ditch the MOTU's (which I was thinking of doing),and move over to Apogees and something like Dangerous for my analogue i/o's. I use a Firewire Powercore and is terrible,in terms of reliability.I frequently experience initialisation failures and whatever with it. The plugins are good,but it inhales sharply, reliabilitywise. You can't use the word s**k as a disparagement on this forum, apparently.Sad.
Thanks for the input!

Similar Messages

HT4009 I make an In-App purchase and my device fails to complete the purchase. Could you do something about it and prevent it from ever happening again?

To iTunes Store
I've being trying to make an In-App purchase and it doesn't work. I get this message that says the pruchase can't be completed. Could you do something about it and prevent it from ever happening again?
Sincerely
Cameron

We are itunes users just like you.
You should contact itunes support

If ipod has been dropped in water, will it ever work again?

If ipod has been dropped in water will it ever work again?

Maybe. Do not use or charge until it is dry. Dry using the instructions here:
How to fix a wet iPod or iPhone | eHow.com

CD quality recording on 4G - will it ever happen?

Last year I bought a Griffin iTalk with the expectation of at least having decent mono quality recordings, but was sadly disappointed.
My understanding was that this "feature" existed because Apple crippled the quality for copyright reasons.
Now that the 5G has presumably relaxed the copyright poblems, and now provides good quality recording as part of the operating system, will Apple ever release a firmware update of older iPods (like mine) to remove the crippled feature (since it's only an OS restriction--the Linux version is reported to have proved that the hardware is up to the specs of higher bitrates).
Any one at Apple able to shed some light on progress? My 4G is still under a year old--surely this feature request is still a possibility for current users?
iPod 4G Windows XP Pro

Hi Jodiemcneill,
Welcome to Apple Discussions.
You can get CD quality recording on your iPod using a different operating system. Here are step-by-step instructions for installing iPL (iPod Linux) on a 4G iPod. Your "microphone" is your left earbud. You cannot monitor your recordings. Your earbud functions as a mic only while you record. Full instructions are found on the iPod Lounge and iPod Linux sites.
This procedure is ONLY for those with a 4g iPod on a Mac.
Use this procedure at your own risk.
Okay, for easy updating, here's what you do:
1. Go to http://www.versiontracker.com/dyn/moreinfo/macosx/27660 and download the 4g ipod linux installer
2. If you installed ipod linux already, DO NOT CLICK ON IT! if you don't have it, install it now.
3. Go to http://ipodlinux.org/builds/
4. Go to bottom and download both the most recent podzilla AND kernel with the icon that has the two arrows pointing toward each other.
5. Unzip them
6. Rename the podzilla one to JUST "podzilla" NO DATE!
7. Rename the kernel one to JUST "kernel.bin" if it isnt already. NO DATE!
8. Double-click on the 4g iPod Linux installer you just downloaded in step one.
9. Click on your iPod on the list.
10. In the drop down menu, click on update files.
11. Click next.
12. Check the update podzilla check box.
13. Click on the "Browse..." button and locate the podzilla file.
14. Check the "Update kernel" check box.
15. Click on the "Browse..." button and locate the kernel.bin file.
16. Click "Update."
17. Wait for it to finish
18. Boot into your up-to-date iPod Linux!
19. Enjoy.
You'll have to adjust the contrast in the preferences to read the screen. To restore your Apple software, use your install disks and update to current state.
Good Luck. I hope this helps.

Will this ever happen

will Apple ever make it so us canadians can get movies and tv on our ipod's because not being able to do this makes me angry at america for getting better things then canada

From experience in the electronics industry it is easier to get approval for new products in the United States. My company could get the FCC approval twice as fast as some countries and other countries would not even consider it for their country until it was approved in the USA first. Goofy but true.
Mort

MST Support for MacBook Pro Retina Late 2013 - DisplayPort 1.2 - Will it ever happen? (with sources)

So back in October, I purchased a brand new Macbook Pro Retina (MBPr), fully loaded with top of the line specs. I was soooo excited to have Thunderbolt 2 tech which Intel AND Apple describes as having DisplayPort 1.2a compatibility - which up to this point is unfortunately NOT the case. The point of the information/questions and requests in this article is to engage a conversation about the issues of not having MST support after Apple falsely mislead their consumers to think otherwise - especially when it is clear the MBPr is capable. Please read on...
Apple advertises that the Thunderbolt 2 ports on BOTH the MBPr and the new Mac Pro (NMP) will have 4K Display support with the famed 20gb/sec Ports (DisplayPort 1.2 only requires a little above 17gb/sec). Now that the 10.9.1 update has been released, we have failed to see MST or Multi-Stream Transport enabled on the MBPr Late 2013. Now, as for the New Mac Pro- it DOES have MST enabled in 10.9.1 with the AMD GPUs. For all of you out there that's questioning what this means, short answer is basically the Mac Pro will be able to power a 4K Monitor at 60Hz through the Thunderbolt 2 Port but the New MBPr is stuck with only HDMI 1.4 support which tops out at 4K 30Hz. 30Hz is unacceptable for anything but movies or a photo slideshow. At 30Hz the cursor will jump across the screen, eliminating any of the benefits of 4K.
BUT it gets worse...
Apple can be seen advertising that the new MBPr 15" model can power a 4K monitor THROUGH the Thunderbolt 2 Port here: http://www.apple.com/thunderbolt - This article quotes the following:
"Now with Thunderbolt 2 built into the new Mac Pro and MacBook Pro with Retina display, you can connect the latest 4K desktop displays and get double the bandwidth for your peripherals. And the two generations of Thunderbolt technology are compatible with each other."
Does this not let the consumer assume that the newest MBPr will be able to drive a 4K display through the Thunderbolt 2 Port? I would say yes it does, but at the time I wrote this, the TB2 Ports can't power a 4K display because, as previously stated, MST is disabled in Mavericks for the 15" MBPr Late 2013.
NOW, later on Apple posted the following article on 4K support here: http://support.apple.com/kb/HT6008
4K support on the MacBook Pro (Retina, Late 2013)
MacBook Pro supports 4K displays and Ultra HD TVs at the following resolutions and refresh rates with the built-in HDMI port:
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
In the article above the New Mac Pro is listed as having support for a 4K Display with the Thunderbolt 2 Port (or MST DisplayPort 1.2a Technology) at 60Hz with no problem. This leads myself and many others to believe that MST will NEVER be enabled on the newest MacBook Pro Retina with Nvidia GPUs. Yes, 4K IS supported but ONLY through the HDMI 1.4 port, which has the limitation of only 30hz. This two-faced advertising is extremely upsetting to a LOT of people, including myself.
Interestingly enough, THIS IS NOT a hardware issue. If one ventures into Windows 8.1 via Bootcamp and connects a 4K Display via the Thunderbolt 2 (or through DP1.2) Port, the Display registers at 60Hz, thus proving that the Thundberbolt 2 Hub Controller is completely capable of MST DisplayPort functionality. Clearly this a driver issue with Apple, Nvidia or Intel or any combination. What Apple has done here is forcing any professional that desires stable and clear 4K technology through their MacBook Pro Retina to do so only using Windows 8.1 on their own machines! Definitely an oxymoron if you ask me...
Later on when the Mac Pro was ready for ordering, Apple placed the Sharp PN-K321 as a compatible option for a 4K Display. On the Store page featuring the (over three thousand dollar) Sharp 4K display, located here http://store.apple.com/us/product/HD971LL/A/sharp-32-pn-k321-4k-ultra-hd-led-mon itor?fnode=53 Apple states the following:
"Note that 4K DisplayPort operation is only compatible with the new Mac Pro (Late 2013)."
All of that being said, and I'm terribly sorry for my wordy ranting...
This brings me to a final two requests to ANYONE reading this post:
a) Has anyone working with the new 10.9.2 Beta Update seen evidence that DisplayPort 1.2 capabilities will be enabled for the new MacBook Pro Retina (Nvidia 750M) with the promised "Graphics Driver Updates" within the next Mavericks update?
and
b) To others that purchased or were/are thinking of purchasing a new MacBook Pro Retina with TB2 Ports: If you are just as upset as me about this crushing blow to consumers that just purchased a $3,000 laptop that were promised something that wasn't delivered - I urge you please, write to Apple and let them know they are making a mistake. You can do this though the support page or through http://www.apple.com/feedback
Thank you for your precious time, and if anyone has anything to contribute to this issue, please jump in....

GOOD NEWS!
The Mavericks 10.9.3 update adds official support for Thunderbolt 2, 4K!
I'm not sure if you will be able to daisy chain anything to the 4K display. I've read that the design of Thunderbolt 2 includes support for DisplayPort 1.2 multi-stream (MST), which allows this type of daisy chaining with 4K, but we don't know if Apple has this supported on it's machines. Apparently it's been buggy in development because the graphics driver needs to work correctly with the Thunderbolt 2 host controller. I'm sure they will work it out if they haven't already.
The above is all via found information on this topic, but you can follow some more discussion here:
http://forums.macrumors.com/showthread.php?t=1713876
One more note on Thunderbolt worth sharing: always keep your fastest peripherals closer to the computer in the chain. If you have a TB1 device directly connected to the computer, anything further down the chain will be limited to TB1 speed/capability regardless of it's native speed. Always connect TB2 devices first, and save anything TB1 for the end of the chain.

Soundcap off will it ever happen

Hey everyone do you know if it will ever be possible to remove the soundcap on a 2 gen nano or boost the volume? i know its possible on earlier models but from what ive heard the new nano is totaly different. Is gopod making like gopod 1.5 that will work with ipod ano 2g and is linux trying to work with ipod nano 2g or will it be impossible?

i think you are speakking of something else you are reffering to the volume limet yeah i dont care about that i never have it on im talking about the souncap which all eu ipods have and you cant get rid of on the 2 gen nano for now and that makes eu ipods sound wayy lower than say american ipods ive listened to an american ipod and it sounds great i couldnt put it at full volume but im not gonna spend money on an american one when ive just bought one lol if id known about the soundcap before then i would have bought an american one

Forms 6i and XP - will it ever happen

Anyone in Oracle care to give an update on the promised release of Forms 6i for XP?

We have not yet stated which patchset will contain the XP certification. Whoever told you it was in patchset 12 was incorrect. The official statement can be found on Metalink, in the certification section. (Look up Forms 6i on XP).
If you can't log into Metalink, use this URL:
http://metalink.oracle.com/metalink/certify/certify.istore_welcome
FYI, the currently planned release date for patchset 12 is still Oct 9th.
Regards,
Robin Zimmermann
Forms Product Management

Anyone know about the future of fowarding text? Will it EVER happen???

Any rumours at all???? Please tell me
It is so fustrating to not be able to foward text & also as fustrating that it seems almost impossible to have your own ringtone in the UK

You can forward your text messages. How would you like to forward it?
Take a snapshot of your screen. Go to your photos and find the screenshot.
to mms:
Alltel = [email protected]
AT&T = [email protected]
Boost Mobile = [email protected]
Cingular (AT&T) = [email protected]
Einstein PCS = [email protected]
Sprint = [email protected]
T-Mobile = [email protected]
US Cellular = [email protected]
Verizon Wireless = [email protected]
Virgin Mobile = [email protected]
or you can e-mail it to thier e-mail address.
Message was edited by: Dynamite DJs

Is it possible to expand the toolbar horizontally to see all the tools? If not, will it ever happen

I used to use configurator to make a panel the showed all the tools without the need to expand. Now with cc2014, configurator is no longer available. I would like to see all the tools in the tool bar without the need to hover over the small icon.
Thanks
ronace

HI,
Try Spaces for a virtual desktop.
http://www.ehow.com/how2189851use-spaces-mac-os-x.html
Carolyn

Will IMessage ever work again?

I thought it was a problem with texting. But it's iMessage. Apple told me to do a restore (after I was forced to do this when downloading ios7). Problem is not fixed. I'm not getting about 50% of texts. I've done everything could to fix this.
Will this get better with a new update or fix on its own? Or is it actually my phone? I believe it is still under warranty. He showed me I had severa important l system apps crashing in his diagnostic tool.
I'm frustrated as ****. My phone resets itself randomly.
iOS 7 update was the worst thing I've ever done to my poor phone.
What the **** should I do?
(Besides get an android, not eligible for upgrade yet!)

I agree iMessage is the worst thing Apple have done! Took me 3 days to work out why my text messages were not being sent, more oddly, text message were apearing on my Ipad whcih is is not the 3g model! just switch it off insettings. Other than the iOS 7 is pretty good!

[SOLVED]Will WOL ever work again after suspend to RAM on my server?

I used Ubuntu on this server for a long while and had WOL working after 'suspend to RAM' and after a 'shutdown -h'. Suddenly with 10.10 WOL after 'suspend to RAM' stopped working, WOL after 'shutdown -h' was still working fine, so I used that for the time being. Some days ago I thought, "well, you use Arch on your laptop for years now, so why not try it on your server, you don't like fixed release cycles anyway and Samba on Ubuntu never worked reliably on this machine, too'. So after a little fiddling to install Arch on this server and following the pm-utils entry on the Arch Wiki I am now at exactly the same position as before, WOL after 'suspend to RAM' doesn't work while WOL after a 'shutdown -h' works. The funny thing is that if I stop the network service before calling 'pm-suspend' on the server directly I can wake it with a WOL command from my laptop. I checked (via ethtool) and saw that disabling the network actually leaves the wol flag for the network card on g, but starting the network service again sets it to d. I have read many howtos and forum posts, but am at a loss right now.
Does anyone have hints or an idea to where to look now?
EDIT: Oh man, could this have really been so easy?
It turns out that I simply need to stop the network service at suspend and start it again at resume, I don't even need to unload the driver module of my network card, doh. What put me off track were all my previous attempts under Ubuntu where I had tried the same thing following provided means (trough acpi) of the distro, seems I messed up there or the documentation was out of date. I now just created a hook completely myself following the Arch documentation for pm-utils and it works now!
[root@archi ~]# cat /etc/pm/sleep.d/Start_and_stop_network_service
#!/bin/bash
case $1 in
hibernate)
echo "You didn't really call hibernate?"
suspend)
echo "Stop the network service"
/etc/rc.d/network stop;
thaw)
echo "oh, suspend to disk is over, we are resuming..."
resume)
echo "Start the network service again"
/etc/rc.d/network start;
/usr/sbin/ethtool -s eth0 wol g;
*) echo "somebody is calling me totally wrong."
esac
I also have to re-enable wol in the script, and at a cold boot I do the same through '/etc/rc.local'.
Last edited by signor_rossi (2011-05-10 19:44:07)

I agree iMessage is the worst thing Apple have done! Took me 3 days to work out why my text messages were not being sent, more oddly, text message were apearing on my Ipad whcih is is not the 3g model! just switch it off insettings. Other than the iOS 7 is pretty good!

License Installation for Multiple Hardware Keys in SAP J2EE Engine

Hi Everyone,
I have a question to ask that we have a Failover setup in our Client Enviornment.
But for SAP JAVA System I am seeing a Problem :
Whenever Failover will happen SAP System will be moved to different Hardware box
which has different Hardware Key.
1) In SAP ABAP Systems we can install Multiple Licenses for Multiple HArdware Keys
so that whenever Failover happens , no need to apply license for that Hardware key
2) But in J2ee System under License Adapter , I am not able to see any option under the same
to install another License
Under Licnese Adpater Service , I am able to see license of J2ee-engine_ora , maintanance_ora & Netweaver_ora licneses
Thanks --
Deepak Gosain

Hi,
Try to paste the two licenses in the same file and then import the license file.
Not sure but give it a try it should work.
Regards,
Vamshi.

Will we ever get to drag and drop icons into our schedules, ever?

I was wondering if iCal would ever have icons like most calenders, ones we can copy and paste from out clipboards to use for meeting schedules, dates, anything we like.
will it ever happen YET?

they been around since the 80's, anyone want these feature?
atleast to see the contacts fotos in the calender to have a hint in a months view, as a pop up, something?

Will Apple ever upgrade Keynote 6 to be as good as Keynote 5.3?

I am still waiting for the lost features of Keynote 5.3 to be added to Keynote 6. For example the ability to customize the presenter display. Will this ever happen?

Presenter Screen is adjustable now, whether Apple decide to provide further controls is as usual kept a secret:

Multiple hardware in Logic? Will it ever happen again?

Similar Messages

Maybe you are looking for