Multiple HDD and Bootloaders

Hello everyone I have a question.
Alright here's the deal I have a 1TB HDD with only Windows XP on it. and I have a 1.5TB HDD with Windows 7 64-Bit installed on it with 75 GB partition for Linux
Currently I have Windows Bootloader setup to allow me to boot into either Windows XP on one HDD or Windows 7 on the other. I'd like to be able to boot into Windows XP or Windows 7 or Linux.
Now if I had to install Linux First how would I make it only take up 75-80GB? I mean I only want about 15-20Gb for a Root partition, max 4 gb for an unnecessary swap partition, and the other 55GB for my files in Arch. Then the other 1.48TB for Windows 7
I'd prefer not to mess with a good thing as I can boot into either HDD for either Windows version. and do not want to screw that up I wish I could boot the Linux partitions using Windows Boot Manager.
In order to get the Arch Installer to recognize my HDD's I had to edit the kernal options before booting from the Live CD by adding pci=nomsi and then pressing enter then b for boot as I was having problems with my drives I guess.
Thanks please ask questions if you didn't follow mine....

If you don't want to touch the existing MBR of your disks, you can install grub to the boot record of your arch partition instead. Then it may be possible to tell the Windows Bootloader to "boot the OS on that partition". If it's not, you can use a grub CD instead. See http://www.gnu.org/software/grub/manual … D-ROM.html.

Similar Messages

  • How to Format HDD and Install newest OS on a Powerbook G4 Titanium (1Ghz, 512mb Ram)

    I have just recently acquired an old Tibook from a friend. The thing is slow and just needs alot of internal work done. Not to mention it's running OS X 10.2 which doesn't allow me to do much.
    I have never owned a Macintosh (Apple) in my life so I'm a serious layman when it comes to this albiet I am very litterate with PCs (don't hate).
    I would simply like to format the HDD and install a fresh OS because the computer has multiple problems that I have been troubleshooting for hours without any luck. Let me know if and how I can just do an installation over the current OS while wiping all of the old data. I just want a fresh install.
    So how do I go about doing this? And whats the newest version of OS X that I can run on this computer? I think this computer is from 2002. If you need more information just let me know!
    I'm really excited to learn the other spectrum of computing!

    The newest version of Mac OS X that machine can run is Mac OS X 10.5.8 Leopard. However, with only 512mb of RAM, that OS will run very, very slowly. Even if you install 1gb, which is probably the max for that model (can't tell for sure because I am guessing at the exact model), it will be only marginally usable. My own old G4 PowerBook has 2gb of RAM and it runs Leopard pretty well, but I wouldn't want to use Leopard with less than the 2gb with the 1.25ghz processor in my PowerBook.
    I'd recommend installing 10.3 Panther instead of 10.5 Leopard. Panther will run fine with 512mb of RAM and will be very comfortable and speedy if you give it the 1gb upgrade. RAM is very inexpensive right now. Panther also requires less hard drive space, which is a good thing since the hard drive in your machine is probably pretty small. There are lots of good email clients and web browsers to use with Panther in place of Mail and Safari; check out Low End Mac for suggestions and discussions.
    Neither Panther nor Leopard are sold by Apple anymore. You can find both at retailers sometimes and frequently on eBay. Leopard tends to be ridiculously expensive, but Panther can often be found for under $40.
    http://www.lowendmac.com/

  • HDD and SSD trouble

    Hi!
    A couple of days ago I left my Macbook Pro 13 inch Mid 2012 at my desk for a couple of minutes. When I returned it showed a grey screen with a folder icon and a question mark within this icon. I remember not putting it down smoothly but more or less dropping it on my desk. Restarts did not work and after searching the web for the meaning of the error icon, I figured that my hard drive must have failed.
    I also have an external hard disk which I use for storage of some video files/projects. I took this hard disk out of the casing and also removed the internal hard disk from my Macbook. I placed the external hard disk in my Macbook, and I placed my former internal hard disk in the casing of my external hard disk drive. I then restarted my Macbook holding down the Alt-key. I was again able to boot OS X through the USB connected hard disk. In finder, my former external hard disk, now connected internally, also showed up. All files were accessible and it showed no sign of faulty internal connection.
    My guess is, after reading through several threads on multiple fora, that the SATA cable in my Macbook might be faulty. It doesn't make sense that it does work for my external storage disk, but doesn't for the original start up disk. On the other hand,  I've read that it can be more sensitive for different hard disks.
    Now, due to all these problems, I thought it was a great idea to finally buy an SSD, as I was planning on upgrading to SSD anyways. I bought a Samsung 840 EVO 250GB SSD Drive. As I already expected, the SSD wasn't recognised by the internal SATA connector. Then I booted using my original hard drive connected using my external hard drive SATA to USB connector, and plugged in my SSD using the Samsung SATA to USB connector. I did a fresh installation of Yosemite on the SSD. I tried booting Yosemite from the SSD using the internal SATA but no luck. So what it comes down to: I can only boot the two drives (my original boot disk and my fresh Yosemite SSD) using the external hard disk SATA to USB connector.
                             Storage Device >
    Connectors
    SSD     
    Hitachi Orignal Boot Disk
    External Hard Drive
    Samsung SSD SATA to USB
    ✓ but not bootable
    ✓ but not bootable
    ✓
    External Hard Drive SATA to USB
    ✓
    ✓
    ✓
    Internal SATA connector
    ✕
    ✕
    ✓
    I then tried to update the firmware of the SSD: made a bootable DVD with the Samsung firmware update and tried to boot from it. Now here a strange thing happens. The boot DVD will only boot when the internal SATA connector is connected to a hard disk, so at the moment it will only boot when the internal drive is my former external hard drive (this is the only one that works internally). When the firmware update runs, it says that no Samsung SSD is found, while it is plugged in via USB.
    I've read things about Trim Enabler and for some reason I used this utility and its currently set on 'on'. I don't know if this is important but I guess the more information the better.
    Now, my questions related to this story are:
    1. I'm currently running Yosemite from an USB plugged storage device. This is obviously not very comfortable. What might be the issue for not being able to boot from the SSD when internally connected to the SATA port?
    2. The SSD firmware won't detect the USB connected SSD. How can this be possible? I will also contact Samsung for this issue.
    I really hope someone can help me out, because currently I'm not exactly sure what the problem is
    Regards,
    Dirk

    Quote from: moxieman117 on 11-August-12, 08:22:42
    Hey guys, just picked up a Z68a-G45 (G3) and I'm currently running the following hardware on it:
    i5 3570k 3.4ghz at 95w (I have verified that the mobo is compatible with this chip) with stock cooler
    1 DIMM of 4gb Kingston HyperX ddr3 1600 ram
    OCZ ZT series 750 watt modular PSU
    I currently have the graphics card, SSD, HDD, and CD-ROM out for trouble shooting purposes.
    Currently, when I start her up it thinks for a second, powers up, fans spin, and then after a few seconds it dies and restarts.
    I went down to 1 DIMM, cleared CMOS, checked for bent pins, even tried a different PSU all with the same result. Is this likely due to the board?
    Thanks!
    Verified how exactly? Yes that CPU is compatible, but only when an Ivy UEFI/BIOS update has been performed.

  • Install a fully encrypted systems on multiple HDD

    I've been reading through the forms and all I can find is how to install on multiple partitions not multiple HDD.
    Here is what I have
    2 1TB Drives /dev/sda and dev/sdb
    I tried encrypting them both then using LVM and extending my Volgroup to include /dev/sdb and creating lvcreate on the extended Volgroup.
    The issue I have is when the system boots it can't find root.. 
    I've done this a number of times with multiple partitions but never multiple HDD any help would be greatly appreciated.

    Unfortunately the encrypt hook included with mkinitcpio is only set up to work for one drive.  There is a mkinitcpio-encrypt-multi hook in the AUR but I am pretty sure it is outdated.  I have seen something in these very threads about how to take what is there and adapt it to the current mkinitcpio though (I ran into this issue a few months ago).
    What I ended up doing (and I felt like it was a cleaner solution) was to put the whole Luks/LVM setup on top of a software RAID setup.  So it essentially made the two drives a since block device, which you have mkinitcpio put together before doing and decryption.  This is because I typically stripe my LVM anyway, so I figured it was not much different, functionality wise, to have a separate device-mapper function handling that for me.

  • How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

    How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

    You can migrate a copy of the data to a new account, then delete the other person's data from each account.  To do this, on the phone that will be changing accounts, if you have any photos in photo stream that you want to keep on the phone, save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you have any synced notes that you want to keep on the phone, email these to yourself so you can create new notes in the new account.
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.  You will create a new icloud email address with you turn Mail to On.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

  • Can I back up the HDD and an External drive at the same time?

    Hi -
    I have a 250Gb HDD (tiny!), but I have just bought myself 2 x 2Gb external drives which I have now formatted.
    I intend to move my complete iTunes library on to 1 of the externals and I want to use the other external as a back-up for both the HDD and the other external.
    My question is: If I plug both the external drives via USB into my Mac (both then appear on my desktop - one named 'Media', the other named 'Time Machine', is it possible to use Time Machine to back-up not only the HDD, but the 'Media' external drive as well at the same time, or would this be a seperate exercise??
    Thanks.

    OK - upon backing up and seeing the results, I see that it has backed up both the HDD and the external, so i kind of answered the question myself...

  • Upgrade HDD and Memory

    Hello
          I recently bought an mac air 2012 and want to upgrade the internal memory HDD and simms ( from 4 to 8 gigs) is it possible and also worth it.

    If you already bought it, then the RAM can't be upgraded. It can only be configured at time of purchase. The Memory is integral with the motherboard, and there are no expansion slots.
    Aftermarket SSD's are available, but it is something you may want to wait upon until after the warranty expires.
    Your alternatives? Sell your underconfigured device, and buy one that is configured the way you want it.

  • Random I/O errors (hdd) and failing to boot, Windows not affected

    I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
    Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
    Partition layout:
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 ntfs System Reserved D8B40750B4073094
    ├─sda2 ntfs 00EA107FEA107360
    └─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
    sr0
    All three are primary partitions. Using ext4 yields the exact same result.
    The problem is easy to reproduce:
    Install Windows 7 to first half of HDD and Arch on the second half
    At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
    Windows seems to work just fine
    Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
    [ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000022f000000 aka 8944M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x9FB7C000 000040
    [ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1668MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
    [ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
    [ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
    [ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
    [ 0.000000] On node 0 totalpages: 649053
    [ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 3337 pages used for memmap
    [ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
    [ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
    [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] allocated 5234680 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
    [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
    [ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1630000 - 0xc16be000 ( 568 kB)
    .data : 0xc146853a - 0xc162ec80 (1817 kB)
    .text : 0xc1000000 - 0xc146853a (4513 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1896.408 MHz processor
    [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
    [ 0.000032] pid_max: default: 32768 minimum: 301
    [ 0.000037] ACPI: Core revision 20140424
    [ 0.009582] ACPI: All ACPI Tables successfully acquired
    [ 0.015209] Security Framework initialized
    [ 0.015217] Yama: becoming mindful.
    [ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015472] Initializing cgroup subsys memory
    [ 0.015491] Initializing cgroup subsys devices
    [ 0.015498] Initializing cgroup subsys freezer
    [ 0.015502] Initializing cgroup subsys net_cls
    [ 0.015507] Initializing cgroup subsys blkio
    [ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.015531] CPU: Physical Processor ID: 0
    [ 0.015532] CPU: Processor Core ID: 0
    [ 0.015536] mce: CPU supports 7 MCE banks
    [ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    [ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
    [ 0.016347] ftrace: allocating 19356 entries in 38 pages
    [ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
    [ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
    [ 0.162668] ... version: 0
    [ 0.162670] ... bit width: 48
    [ 0.162671] ... generic registers: 6
    [ 0.162672] ... value mask: 0000ffffffffffff
    [ 0.162674] ... max period: 00007fffffffffff
    [ 0.162675] ... fixed-purpose events: 0
    [ 0.162676] ... event mask: 000000000000003f
    [ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
    [ 0.186179] x86: Booting SMP configuration:
    [ 0.186182] .... node #0, CPUs: #1
    [ 0.218942] Initializing CPU#1
    [ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
    [ 0.226179] #2
    [ 0.258736] Initializing CPU#2
    [ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
    [ 0.266180] #3
    [ 0.276300] Initializing CPU#3
    [ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.279379] x86: Booted up 1 node, 4 CPUs
    [ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
    [ 0.280484] devtmpfs: initialized
    [ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
    [ 0.281973] pinctrl core: initialized pinctrl subsystem
    [ 0.282053] RTC time: 22:28:26, date: 09/21/14
    [ 0.282107] NET: Registered protocol family 16
    [ 0.282225] cpuidle: using governor ladder
    [ 0.282228] cpuidle: using governor menu
    [ 0.282436] ACPI: bus type PCI registered
    [ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.282558] PCI: Using MMCONFIG for extended config space
    [ 0.282559] PCI: Using configuration type 1 for base access
    [ 0.293370] ACPI: Added _OSI(Module Device)
    [ 0.293374] ACPI: Added _OSI(Processor Device)
    [ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.323484] ACPI: Interpreter enabled
    [ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.323519] ACPI: (supports S0 S3 S4 S5)
    [ 0.323522] ACPI: Using IOAPIC for interrupt routing
    [ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
    [ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
    [ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.335971] PCI host bridge to bus 0000:00
    [ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
    [ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
    [ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
    [ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
    [ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
    [ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
    [ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
    [ 0.336266] pci 0000:00:01.0: supports D1 D2
    [ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
    [ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
    [ 0.336417] pci 0000:00:01.1: supports D1 D2
    [ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
    [ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
    [ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
    [ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
    [ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
    [ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
    [ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
    [ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
    [ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
    [ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
    [ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
    [ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
    [ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
    [ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
    [ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
    [ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
    [ 0.340177] pci 0000:00:12.2: supports D1 D2
    [ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
    [ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
    [ 0.343004] pci 0000:00:13.2: supports D1 D2
    [ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
    [ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
    [ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
    [ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
    [ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
    [ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
    [ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
    [ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
    [ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
    [ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
    [ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.344446] pci 0000:01:00.0: supports D1 D2
    [ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
    [ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
    [ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
    [ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
    [ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
    [ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
    [ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.356487] pci 0000:03:00.0: supports D1 D2
    [ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    [ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
    [ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
    [ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    [ 0.363129] pci_bus 0000:00: on NUMA node 0
    [ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
    [ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.367456] vgaarb: loaded
    [ 0.367458] vgaarb: bridge control possible 0000:00:01.0
    [ 0.367505] PCI: Using ACPI for IRQ routing
    [ 0.369255] PCI: pci_cache_line_size set to 64 bytes
    [ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
    [ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
    [ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
    [ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
    [ 0.369516] NetLabel: Initializing
    [ 0.369518] NetLabel: domain hash size = 128
    [ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.369532] NetLabel: unlabeled traffic allowed by default
    [ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.371730] Switched to clocksource hpet
    [ 0.378213] pnp: PnP ACPI init
    [ 0.378231] ACPI: bus type PNP registered
    [ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
    [ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
    [ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
    [ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.378841] system 00:04: [io 0x04d6] has been reserved
    [ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
    [ 0.378846] system 00:04: [io 0x077a] has been reserved
    [ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
    [ 0.378850] system 00:04: [io 0x0c14] has been reserved
    [ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
    [ 0.378855] system 00:04: [io 0x0c6c] has been reserved
    [ 0.378857] system 00:04: [io 0x0c6f] has been reserved
    [ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
    [ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
    [ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
    [ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.382206] pnp: PnP ACPI: found 6 devices
    [ 0.382211] ACPI: bus type PNP unregistered
    [ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
    [ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
    [ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
    [ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
    [ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
    [ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420484] NET: Registered protocol family 2
    [ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.420733] TCP: reno registered
    [ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420798] NET: Registered protocol family 1
    [ 0.420831] pci 0000:00:01.0: Boot video device
    [ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 1.038759] PCI: CLS 64 bytes, default 64
    [ 1.038818] Unpacking initramfs...
    [ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
    [ 1.112753] Simple Boot Flag at 0x44 set to 0x1
    [ 1.113077] perf: AMD NB counters detected
    [ 1.113122] LVT offset 0 assigned for vector 0x400
    [ 1.113138] perf: AMD IBS detected (0x000000ff)
    [ 1.113149] apm: BIOS not found.
    [ 1.113200] Scanning for low memory corruption every 60 seconds
    [ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.116388] zbud: loaded
    [ 1.116669] VFS: Disk quotas dquot_6.5.2
    [ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.116962] msgmni has been set to 1707
    [ 1.117034] Key type big_key registered
    [ 1.117325] bounce: pool size: 64 pages
    [ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.117448] io scheduler noop registered
    [ 1.117452] io scheduler deadline registered
    [ 1.117524] io scheduler cfq registered (default)
    [ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.118114] GHES: HEST is not enabled!
    [ 1.118129] isapnp: Scanning for PnP cards...
    [ 1.513691] isapnp: No Plug & Play device found
    [ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.514746] rtc_cmos 00:01: RTC can wake from S4
    [ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.515246] TCP: cubic registered
    [ 1.515386] NET: Registered protocol family 10
    [ 1.515657] NET: Registered protocol family 17
    [ 1.516096] Using IPI No-Shortcut mode
    [ 1.516269] registered taskstats version 1
    [ 1.516866] Magic number: 14:856:502
    [ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
    [ 1.517032] PM: Hibernation image not present or could not be loaded.
    [ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
    [ 1.517350] Write protecting the kernel text: 4516k
    [ 1.517388] Write protecting the kernel read-only data: 1332k
    [ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [ 1.529660] systemd-udevd[57]: starting version 216
    [ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
    [ 1.568048] ACPI: bus type USB registered
    [ 1.568103] usbcore: registered new interface driver usbfs
    [ 1.568141] usbcore: registered new interface driver hub
    [ 1.568537] SCSI subsystem initialized
    [ 1.574578] usbcore: registered new device driver usb
    [ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.594746] ehci-pci: EHCI PCI platform driver
    [ 1.594935] QUIRK: Enable AMD PLL fix
    [ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.595002] ehci-pci 0000:00:12.2: debug port 1
    [ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
    [ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.595830] ohci-pci: OHCI PCI platform driver
    [ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.602284] libata version 3.00 loaded.
    [ 1.602306] hub 1-0:1.0: USB hub found
    [ 1.602325] hub 1-0:1.0: 5 ports detected
    [ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.602912] ehci-pci 0000:00:13.2: debug port 1
    [ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
    [ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 1.612308] hub 2-0:1.0: USB hub found
    [ 1.612317] hub 2-0:1.0: 5 ports detected
    [ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
    [ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
    [ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
    [ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
    [ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
    [ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
    [ 1.613374] hub 3-0:1.0: USB hub found
    [ 1.613388] hub 3-0:1.0: 2 ports detected
    [ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
    [ 1.616754] hub 4-0:1.0: USB hub found
    [ 1.616768] hub 4-0:1.0: 2 ports detected
    [ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
    [ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
    [ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.673072] hub 5-0:1.0: USB hub found
    [ 1.673098] hub 5-0:1.0: 5 ports detected
    [ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
    [ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
    [ 1.729803] hub 6-0:1.0: USB hub found
    [ 1.729831] hub 6-0:1.0: 5 ports detected
    [ 1.730166] ahci 0000:00:11.0: version 3.0
    [ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
    [ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.731131] scsi0 : ahci
    [ 1.731321] scsi1 : ahci
    [ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
    [ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
    [ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
    [ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
    [ 2.218438] ata2.00: configured for UDMA/133
    [ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
    [ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.318651] ata1.00: configured for UDMA/133
    [ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
    [ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
    [ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.338885] sda: sda1 sda2 sda3
    [ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
    [ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 2.438989] ata1.00: irq_stat 0x40000008
    [ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
    [ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 2.439127] ata1.00: status: { DRDY ERR }
    [ 2.439166] ata1.00: error: { ICRC ABRT }
    [ 2.439207] ata1: hard resetting link
    [ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.586950] usbcore: registered new interface driver usbhid
    [ 2.586953] usbhid: USB HID core driver
    [ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
    [ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
    [ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
    [ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
    [ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
    [ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
    [ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.039928] ata1.00: configured for UDMA/133
    [ 3.039955] ata1: EH complete
    [ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
    [ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
    [ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
    [ 3.089128] ata1.00: irq_stat 0x40000008
    [ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
    res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.089265] ata1.00: status: { DRDY ERR }
    [ 3.089304] ata1.00: error: { ICRC ABRT }
    [ 3.089346] ata1: hard resetting link
    [ 3.115583] Switched to clocksource tsc
    [ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.694602] ata1.00: configured for UDMA/133
    [ 3.694621] ata1: EH complete
    [ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
    [ 3.809168] ata1.00: irq_stat 0x40000008
    [ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
    res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.809305] ata1.00: status: { DRDY ERR }
    [ 3.809343] ata1.00: error: { ICRC ABRT }
    [ 3.809385] ata1: hard resetting link
    [ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4.404835] ata1.00: configured for UDMA/133
    [ 4.404858] ata1: EH complete
    [ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
    [ 4.453760] ata1.00: irq_stat 0x40000008
    [ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
    res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
    [ 4.453894] ata1.00: status: { DRDY ERR }
    [ 4.453932] ata1.00: error: { UNC }
    [ 4.637639] ata1.00: configured for UDMA/133
    [ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
    [ 4.637691] sd 0:0:0:0: [sda]
    [ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
    [ 4.637695] sd 0:0:0:0: [sda]
    [ 4.637697] Sense Key : 0x3 [current] [descriptor]
    [ 4.637700] Descriptor sense data with sense descriptors (in hex):
    [ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 4.637710] 00 00 09 b8
    [ 4.637714] sd 0:0:0:0: [sda]
    [ 4.637716] ASC=0x11 ASCQ=0x4
    [ 4.637718] sd 0:0:0:0: [sda] CDB:
    [ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
    [ 4.637727] end_request: I/O error, dev sda, sector 2488
    [ 4.637786] Buffer I/O error on device sda1, logical block 55
    [ 4.637826] Buffer I/O error on device sda1, logical block 56
    [ 4.637866] Buffer I/O error on device sda1, logical block 57
    [ 4.637905] Buffer I/O error on device sda1, logical block 58
    [ 4.637945] Buffer I/O error on device sda1, logical block 59
    [ 4.637984] Buffer I/O error on device sda1, logical block 60
    [ 4.638024] Buffer I/O error on device sda1, logical block 61
    [ 4.638063] Buffer I/O error on device sda1, logical block 62
    [ 4.638105] Buffer I/O error on device sda1, logical block 63
    [ 4.638188] ata1: EH complete
    [ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
    [ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
    [ 4.879364] ata1.00: irq_stat 0x40000008
    [ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
    res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 4.879502] ata1.00: status: { DRDY ERR }
    [ 4.879540] ata1.00: error: { ICRC ABRT }
    [ 4.879583] ata1: hard resetting link
    [ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 5.469816] ata1.00: configured for UDMA/133
    [ 5.469845] ata1: EH complete
    [ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 5.582859] ata1.00: irq_stat 0x40000008
    [ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
    [ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 5.582997] ata1.00: status: { DRDY ERR }
    [ 5.583036] ata1.00: error: { ICRC ABRT }
    [ 5.583078] ata1: hard resetting link
    [ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.191135] ata1.00: configured for UDMA/133
    [ 6.191166] ata1: EH complete
    [ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
    [ 6.256073] ata1.00: irq_stat 0x40000008
    [ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.256212] ata1.00: status: { DRDY ERR }
    [ 6.256250] ata1.00: error: { ICRC ABRT }
    [ 6.256292] ata1: hard resetting link
    [ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.845773] ata1.00: configured for UDMA/133
    [ 6.845806] ata1: EH complete
    [ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
    [ 6.986223] ata1.00: irq_stat 0x40000008
    [ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
    res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.986360] ata1.00: status: { DRDY ERR }
    [ 6.986399] ata1.00: error: { ICRC ABRT }
    [ 6.986440] ata1: hard resetting link
    [ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 7.578097] ata1.00: configured for UDMA/133
    [ 7.578124] ata1: EH complete
    [ 7.587216] random: nonblocking pool is initialized
    [ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
    [ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
    [ 7.602850] ata1.00: irq_stat 0x40000008
    [ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
    [ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 7.602982] ata1.00: status: { DRDY ERR }
    [ 7.603020] ata1.00: error: { ICRC ABRT }
    [ 7.603061] ata1: hard resetting link
    [ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.188490] ata1.00: configured for UDMA/133
    [ 8.188517] ata1: EH complete
    [ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
    [ 8.216361] ata1.00: irq_stat 0x40000008
    [ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
    res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.216500] ata1.00: status: { DRDY ERR }
    [ 8.216539] ata1.00: error: { ICRC ABRT }
    [ 8.216581] ata1: hard resetting link
    [ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.809726] ata1.00: configured for UDMA/133
    [ 8.809758] ata1: EH complete
    [ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
    [ 8.836295] ata1.00: irq_stat 0x40000008
    [ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
    res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.836429] ata1.00: status: { DRDY ERR }
    [ 8.836467] ata1.00: error: { ICRC ABRT }
    [ 8.836507] ata1: hard resetting link
    [ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 9.430994] ata1.00: configured for UDMA/133
    [ 9.431018] ata1: EH complete
    [ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 9.837542] ata1.00: irq_stat 0x40000008
    [ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
    [ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 9.837680] ata1.00: status: { DRDY ERR }
    [ 9.837719] ata1.00: error: { ICRC ABRT }
    [ 9.837761] ata1: hard resetting link
    [ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 10.515900] ata1.00: configured for UDMA/133
    [ 10.515972] sd 0:0:0:0: [sda]
    [ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
    [ 10.515978] sd 0:0:0:0: [sda]
    [ 10.515979] Sense Key : 0xb [current] [descriptor]
    [ 10.515983] Descriptor sense data with sense descriptors (in hex):
    [ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 10.515992] 5e 89 08 20
    [ 10.515997] sd 0:0:0:0: [sda]
    [ 10.515998] ASC=0x47 ASCQ=0x0
    [ 10.516001] sd 0:0:0:0: [sda] CDB:
    [ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
    [ 10.516010] end_request: I/O error, dev sda, sector 1586038816
    [ 10.516148] ata1: EH complete
    [ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
    [ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
    [ 10.529786] ata1.00: irq_stat 0x40000008
    [ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
    [ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
    res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 10.529924] ata1.00: status: { DRDY ERR }
    [ 10.529962] ata1.00: error: { ICRC ABRT }
    [ 10.530004] ata1: hard resetting link
    [ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.139673] ata1.00: configured for UDMA/100
    [ 11.139723] sd 0:0:0:0: [sda]
    [ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.139728] sd 0:0:0:0: [sda]
    [ 11.139730] Sense Key : 0xb [current] [descriptor]
    [ 11.139733] Descriptor sense data with sense descriptors (in hex):
    [ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.139743] 5e 89 08 d4
    [ 11.139747] sd 0:0:0:0: [sda]
    [ 11.139749] ASC=0x47 ASCQ=0x0
    [ 11.139751] sd 0:0:0:0: [sda] CDB:
    [ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
    [ 11.139761] end_request: I/O error, dev sda, sector 1586038992
    [ 11.139889] ata1: EH complete
    [ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
    [ 11.153169] ata1.00: irq_stat 0x40000008
    [ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.153306] ata1.00: status: { DRDY ERR }
    [ 11.153345] ata1.00: error: { ICRC ABRT }
    [ 11.153386] ata1: hard resetting link
    [ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.749884] ata1.00: configured for UDMA/100
    [ 11.749918] sd 0:0:0:0: [sda]
    [ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.749923] sd 0:0:0:0: [sda]
    [ 11.749925] Sense Key : 0xb [current] [descriptor]
    [ 11.749928] Descriptor sense data with sense descriptors (in hex):
    [ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.749938] 5e 89 08 28
    [ 11.749942] sd 0:0:0:0: [sda]
    [ 11.749944] ASC=0x47 ASCQ=0x0
    [ 11.749946] sd 0:0:0:0: [sda] CDB:
    [ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
    [ 11.749956] end_request: I/O error, dev sda, sector 1586038824
    [ 11.750093] ata1: EH complete
    [ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 11.763206] ata1.00: irq_stat 0x40000008
    [ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.763343] ata1.00: status: { DRDY ERR }
    [ 11.763382] ata1.00: error: { ICRC ABRT }
    [ 11.763424] ata1: hard resetting link
    [ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.360321] ata1.00: configured for UDMA/100
    [ 12.360370] sd 0:0:0:0: [sda]
    [ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.360375] sd 0:0:0:0: [sda]
    [ 12.360377] Sense Key : 0xb [current] [descriptor]
    [ 12.360380] Descriptor sense data with sense descriptors (in hex):
    [ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.360390] 5e 89 08 c8
    [ 12.360394] sd 0:0:0:0: [sda]
    [ 12.360395] ASC=0x47 ASCQ=0x0
    [ 12.360398] sd 0:0:0:0: [sda] CDB:
    [ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
    [ 12.360407] end_request: I/O error, dev sda, sector 1586038984
    [ 12.360543] ata1: EH complete
    [ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.370005] ata1.00: irq_stat 0x40000008
    [ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.370143] ata1.00: status: { DRDY ERR }
    [ 12.370182] ata1.00: error: { ICRC ABRT }
    [ 12.370224] ata1: hard resetting link
    [ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.959379] ata1.00: configured for UDMA/100
    [ 12.959426] sd 0:0:0:0: [sda]
    [ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.959432] sd 0:0:0:0: [sda]
    [ 12.959433] Sense Key : 0xb [current] [descriptor]
    [ 12.959437] Descriptor sense data with sense descriptors (in hex):
    [ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.959447] 63 89 08 3a
    [ 12.959462] sd 0:0:0:0: [sda]
    [ 12.959464] ASC=0x47 ASCQ=0x0
    [ 12.959466] sd 0:0:0:0: [sda] CDB:
    [ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
    [ 12.959476] end_request: I/O error, dev sda, sector 1669924920
    [ 12.959616] ata1: EH complete
    [ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
    [ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.973247] ata1.00: irq_stat 0x40000008
    [ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.973384] ata1.00: status: { DRDY ERR }
    [ 12.973423] ata1.00: error: { ICRC ABRT }
    [ 12.973464] ata1: hard resetting link
    [ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 13.569691] ata1.00: configured for UDMA/33
    [ 13.569750] sd 0:0:0:0: [sda]
    [ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
    [ 13.569755] sd 0:0:0:0: [sda]
    [ 13.569757] Sense Key : 0xb [current] [descriptor]
    [ 13.569761] Descriptor sense data with sense descriptors (in hex):
    [ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 13.569771] 5e 89 08 c0
    [ 13.569775] sd 0:0:0:0: [sda]
    [ 13.569777] ASC=0x47 ASCQ=0x0
    [ 13.569779] sd 0:0:0:0: [sda] CDB:
    [ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
    [ 13.569789] end_request: I/O error, dev sda, sector 1586038976
    [ 13.569933] ata1: EH complete
    [ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
    [ 13.583360] ata1.00: irq_stat 0x40000008
    [ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
    [ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 13.585478] ata1.00: status: { DRDY ERR }
    [ 13.585516] ata1.00: error: { ICRC ABRT }
    [ 13.585558] ata1: hard resetting link
    [ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.180020] ata1.00: configured for UDMA/33
    [ 14.180069] sd 0:0:0:0: [sda]
    [ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.180074] sd 0:0:0:0: [sda]
    [ 14.180076] Sense Key : 0xb [current] [descriptor]
    [ 14.180079] Descriptor sense data with sense descriptors (in hex):
    [ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.180089] 63 89 08 30
    [ 14.180094] sd 0:0:0:0: [sda]
    [ 14.180095] ASC=0x47 ASCQ=0x0
    [ 14.180098] sd 0:0:0:0: [sda] CDB:
    [ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
    [ 14.180108] end_request: I/O error, dev sda, sector 1669924912
    [ 14.180245] ata1: EH complete
    [ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
    [ 14.190153] ata1.00: irq_stat 0x40000008
    [ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
    res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.190290] ata1.00: status: { DRDY ERR }
    [ 14.190328] ata1.00: error: { ICRC ABRT }
    [ 14.190371] ata1: hard resetting link
    [ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.779168] ata1.00: configured for UDMA/33
    [ 14.779214] sd 0:0:0:0: [sda]
    [ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.779218] sd 0:0:0:0: [sda]
    [ 14.779220] Sense Key : 0xb [current] [descriptor]
    [ 14.779223] Descriptor sense data with sense descriptors (in hex):
    [ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.779233] 63 89 08 80
    [ 14.779237] sd 0:0:0:0: [sda]
    [ 14.779239] ASC=0x47 ASCQ=0x0
    [ 14.779241] sd 0:0:0:0: [sda] CDB:
    [ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
    [ 14.779251] end_request: I/O error, dev sda, sector 1669924976
    [ 14.779391] ata1: EH complete
    [ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
    [ 14.793513] ata1.00: irq_stat 0x40000008
    [ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.793651] ata1.00: status: { DRDY ERR }
    [ 14.793690] ata1.00: error: { ICRC ABRT }
    [ 14.793733] ata1: hard resetting link
    [ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.378218] ata1.00: configured for UDMA/33
    [ 15.378240] sd 0:0:0:0: [sda]
    [ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
    [ 15.378245] sd 0:0:0:0: [sda]
    [ 15.378247] Sense Key : 0xb [current] [descriptor]
    [ 15.378250] Descriptor sense data with sense descriptors (in hex):
    [ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 15.378260] 63 89 08 28
    [ 15.378264] sd 0:0:0:0: [sda]
    [ 15.378266] ASC=0x47 ASCQ=0x0
    [ 15.378268] sd 0:0:0:0: [sda] CDB:
    [ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
    [ 15.378277] end_request: I/O error, dev sda, sector 1669924904
    [ 15.378427] ata1: EH complete
    [ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
    [ 15.390148] ata1.00: irq_stat 0x40000008
    [ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
    res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.390285] ata1.00: status: { DRDY ERR }
    [ 15.390324] ata1.00: error: { ICRC ABRT }
    [ 15.390366] ata1: hard resetting link
    [ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.977410] ata1.00: configured for UDMA/33
    [ 15.977500] ata1: EH complete
    [ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
    [ 15.986916] ata1.00: irq_stat 0x40000008
    [ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.987054] ata1.00: status: { DRDY ERR }
    [ 15.987093] ata1.00: error: { ICRC ABRT }
    [ 15.987135] ata1: hard resetting link
    [ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 16.576437] ata1.00: configured for UDMA/33
    [ 16.576509] sd 0:0:0:0: [sda]
    [ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
    [ 16.576514] sd 0:0:0:0: [sda]
    [ 16.576516] Sense Key : 0xb [current] [descriptor]
    [ 16.576519] Descriptor sense data with sense descriptors (in hex):
    [ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 16.576529] 63 89 08 20
    [ 16.576533] sd 0:0:0:0: [sda]
    [ 16.576534] ASC=0x47 ASCQ=0x0
    [ 16.576537] sd 0:0:0:0: [sda] CDB:
    [ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
    [ 16.576546] end_request: I/O error, dev sda, sector 1669924896
    [ 16.576642] ata1: EH complete
    [ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
    [ 16.586847] ata1.00: irq_stat 0x40000008
    [ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
    [ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 16.586980] ata1.00: status: { DRDY ERR }
    [ 16.587018] ata1.00: error: { ICRC ABRT }
    [ 16.587058] ata1: hard resetting link
    [ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 17.175907] ata1.00: configured for UDMA/33
    [ 17.175963] sd 0:0:0:0: [sda]
    [ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
    [ 17.175968] sd 0:0:0:0: [sda]
    [ 17.175970] Sense Key : 0xb [current] [descriptor]
    [ 17.175973] Descriptor sense data with sense descriptors (in hex):
    [ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 17.175983] 5e 89 08 54
    [ 17.175987] sd

    I have only Arch installed, 64 bit, UEFI boot.
    The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
    Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
    res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
    Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
    Sep 24 06:13:59 kernel: ata6: hard resetting link
    Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:13:59 kernel: 00 00 0e 87
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
    Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
    Sep 24 06:13:59 kernel: ata6: EH complete
    Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
    Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
    res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6: hard resetting link
    Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
    Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    and so on... It somehow booted, but now journalctl says:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
    while the Error hasn't occured yet.
    I think I wil take the emergency procedure, and start backing up my files and system ...
    I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.

  • My touch screen isn't working and stopped working after I went running with it. I have restarted it multiple times and restored it on my MacBook. It will still not let me slide it to even look at the phone. Please help ASAP.

    I took my iPhone running today and when I returned I was not able to slide it open or type in my pass code. All buttons are still responding. I have tried restarting it multiple times and even restored it, but the touch screen will not respond to anything. I also cleaned the screen off with a damp cloth. Please help! I WAS able to slide it open in the middle of restoring it but not able to click on any apps. Help! My life is on my iPhone and I am a nurse on call!

    Try restore as new using computer iTunes.

  • Recently bought a new HDD, and encrypted it, and it no longer works on any machine, help?

    Recently bought a new HDD, and encryped it and it no longer works...
    Does anyone have any idea how or why?
    I can't seem to press anything except repair and verify...

    I followed what it said on another one of these discussion forums, by going onto the disk and changing it to encrypted, created a password then pressed erase, and it no longer will open at all, even on normal windows
    Sean

  • Can anyone advise how to close apps on iPad with new iOS? I have multiple open and cannot close them.

    Can anyone advise how to close apps with the new iOS?  I have multiple open and cannot close them

    Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
    Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB.

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • Multiple users and shopping carts, one searchable index?

    Hi all,
    I've got an idea but I would like to know if it possible with Business Catalyst. I'll try and explain as simply as possible:
    I have multiple users (let's say 10). They all need separate shopping carts as they are all selling different products. They all need their own admin areas that keep track of their incomes, workflows, shopping carts, etc. They are essentially 10 independent users. Will the WebCommerce10 plan satisfy their needs, or will 10 separate WebCommerce single plans need to be sold?
    Taking the above into account, is there anyway to have 10 independent shopping carts, but they can all be searchable simultaneously? e.g. think eBay, lots of users with their own independent admin areas and products, but one search field returning many results from all the user's shopping carts? Is there anyway to achieve something like this with BC? Can subdomains do this? Any other ideas how to achieve this if none of the above is possible?
    My plan B is having a landing page where a link for each of the 10 users will take them to their relevant shopping carts, but this experience isn't quite as integrated as I would like, from a web surfer's point of view.
    Thanks.
    Clint,
    Komma Media

    Hi Robbie,
    Yes, this would require significant modification to the shopping cart functionality. As it is now, it's very dependent the ShoppingCart being associated with the session and therefore the user. To change that would be significant work.
    Additionally, if you had two people logging in to the same account and editing the same order around the same time, this would tend to not to work well. This is because two users would be two sessions and they would often get routed to different app server instances. Because the way orders are managed, there's no way to immediately sync up the changes between multiple instances, and if you managed to do it would likely slow things down drastically. I would not recommend trying this with ATG.
    Thanks.
    Nick Glover
    Oracle Support for ATG Products

  • HT5616 I have multiple phones and iPads and all are linked to one iCloud account and one iTunes Account.  I want to keep the same iTunes Account so I can share music, etc., however, I want each device to have its own iCloud account.  How do I do this?

    I have multiple phones and iPads and all are linked to one iCloud account and one iTunes Account.  I want to keep the same iTunes Account so I can share music, etc., however, I want each device to have its own iCloud account.  Any help on how I can I do this?

    You'll need to create an Apple ID for each device. Use the new Apple ID for FaceTime, iMessage and iCloud on the device. Use the original Apple ID for Settings>iTunes & App Store.

  • Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

    Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

    Hi LRagsdale517,
    You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
    Please let us know how it goes.
    Best,
    Sara

Maybe you are looking for

  • Entries missing in J2I8 Capital goods transfer of credit

    HI Experts, R23C part 11 register entries are not matching with J2I8 entries.Some entries found in RG23C part 11 Register are missing in J2I8 - Capital goods transfer of credit.What may the probem. Some entries found in J2I8 has to be deleted.Is it p

  • Stop gnome 3.2 from trying to adjust brightness [SOLVED]

    I see this error a lot in my .xsession.errors: (gnome-settings-daemon:1207): power-plugin-WARNING **: failed to restore backlight to 100: out of brightness range: 100, has to be 8 -> 0 This is probably because I have samsung-tools and easy-slow-down-

  • Macbook Pro Earphone/Headphone Problem

    Hello. Whenever I plug my earphone/headphone into the headphone jack, the music or sound coming out of the earphones will increase quickly and then suddenly drop back to its 'normal' sound. This happens within 1-2 seconds of plugging it in. I contact

  • Add search bar to Navigationbar in IOS 8 problem ?

    The search bar is set as self.navigationItem.titleView = self.searchBar; For cancel button : [self.navigationItem setRightBarButtonItem:cancelBtn animated:YES]; It is coming in correct alignment for IOS7 , But in IOS 8 search bar and cancel button ar

  • Continious File Names?

    Hi. I would like to import my photos from my digital camera into iphoto with continous file names. I want to keep the same file names that are in my existing folder just adding a number. For example all my photos in the album are called Lilly. I wish