Multiple header pages
I am creating a large report where the header section spans 2 pages. Currently, reports prints just the first page in the header section. How can I get the other page to print? I tried the vertical panels per page property, but that doesn't seem to work.
Thanks
Avril
I'm using reports 6i. The behaviour is in the previewer and output. I will also like to get the page header information (eg page number, outside the margins) printed on all the pages in the header section.
Thanks for your help.
Avril
Similar Messages
-
How to avoid multiple Header(TOP-OF-PAGE) because of page break
Hi All,
I am working with a classical report in which we are getting multiple header because of page break.
can we get a single header, in other words can we trigger TOP-OF-PAGE event only once not every
time when a page break occurs.
Regards
Manishuse TOP_OF_LIST Event Instead of TOP_OF_PAGE.
Sandip Sonar. -
Multiple head tags on instance pages
Hi there,
I have a problem whereby pages created from a template are
producing multiple head tags, 3 pairs in fact.
I have used the Check Template Syntax and it is OK.
If I remove the doctype it does not create these duplicate
head areas.
Here is my doctype in the dwt:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xml:lang="en">
<head>
<!-- TemplateInfo codeOutsideHTMLIsLocked="false"
-->
and here is what is being output in instance pages:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xml:lang="en"><head></head><head></head><head></head><!--
InstanceBegin template="/Templates/master.dwt"
codeOutsideHTMLIsLocked="false" -->
I have searched the forums and the web in general but have
found no help. Any help would be greatly appreciated.
kind regards> Have you ever heard of editable-head-areas being
duplicated?
No. But I have recommended consistently that Nested templates
are too
complex for casual use. Frankly, I have not found a good
scenario that
would compel me to use them at all. I don't encourage that
you use them
either - why are you?
> I have a master template, and the head area has a
Dreamweaver
> editable-area
> tag around the entire head area.
Why would you do this? All you need there is the doctitle and
the head
region.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"scratchmybrain" <[email protected]> wrote
in message
news:[email protected]...
> Hi Murray
>
> sorry if that was confusing.
>
> What it meant is, and some more of the story, as
follows:
>
> I have a master template, and the head area has a
Dreamweaver
> editable-area
> tag around the entire head area.
>
> I have made new nested templates from the master, each
of which have the
> editable-area tag around the entire head.
>
> However, whenever I made a new template based on the
master, Dreamweaver
> would
> assign a second editable-area tag immediately after the
head, but which
> was
> *also* called the 'head'.
>
> And since I had 2 areas called the 'head', the second of
which (an empty
> tag)
> seemed to take precedent over the former, and
obliterated the head of
> subsequent child pages.
>
> Indeed just by editing the master it applied the same
extra set of tags to
> each nested template.
>
> All of this happened before I became aware of what the
problem was, and by
> hunting around I found this extra editable-area tag to
be the culprit.
>
> I do not have access to the files until Monday next
week, so I can't
> attach
> anything.
>
> Have you ever heard of editable-head-areas being
duplicated?
>
> thanks Murray
>
> cheers
>
> Darryl
>
> -
Hi Guys,
I got an issue , My flat file having multiple header lines
TPS27RPR MOME THRIFT (SAVING) PLAN SYSTEM Page 2
09:54 05 JAN 2014 List of Contributors w/Company Contributions Phase DAY Unit TRE
Company No: xxxxxxxx - xxxxxxxxxxxxx.
Employee/ Employee/
Employee Full Name/ Company Company Allocation
Number ID Number PS PN End Date Contribution Profit Total Balance Percentage
some lines of data and again
TPS27RPR MOME THRIFT (SAVING) PLAN SYSTEM Page 2
09:54 05 JAN 2014 List of Contributors w/Company Contributions Phase DAY Unit TRE
Company No: xxxxxxxx - xxxxxxxxxxxxx.
Employee/ Employee/
Employee Full Name/ Company Company Allocation
Number ID Number PS PN End Date Contribution Profit Total Balance Percentage
in this case how could I separate the header lines from the flat file and update the details to my internal table.
kindly help me on this issue.
Thanks and regards,
M.S.Amirtharajvijay.Hi Amirthraj,
If the flat file is static (if the content within it is same for all) then use the offset concept. First get the contents of the flat file into an internal table and later find the field that has to be in final internal table within the line, calculate the offset for the line and get the value into an workarea. Finally modify/append the work area into an internal table. Also wait for other experts answers for any other hassle free way to achieve the requirement.
With Regards,
Giriesh M -
I understand how to make the top row on a table a header row that will appear on all pages of a multiple page sheet.
Is it possible to get the top 2 rows (or any other number, for that matter) to act as a header row as well? I would like more than one row of the first printing page of a sheet to appear on all sheets.
Thanks.Hello
you wrote:
+Simple solution to the multiple header rows.+
+Not being able to select where I start filtering my data and also allowing multiple filters on data would be helpful too. But that's a different subject.+
And this forum is not the better way to send a request about Numbers.
Most of us are users trying to help other users, we aren't Apple employees.
This forum is rarely entered by Apple engineers so the hope to get one of them reading your post is near zero.
It would be more efficient to use the standard track:
go to "Provide Numbers Feedback" in the "Numbers" menu and describe your wishes
Yvan KOENIG (from FRANCE mercredi 3 octobre 2007 19:10:19) -
How can I setup multiple home page tabs?
I am trying to setup mozilla like I have internet explorer. This is to say with multiple home page tabs on opening. Can I do this, if so how?
See:
* https://support.mozilla.com/kb/How+to+set+the+home+page -
How can I use multiple summary pages in a single OPM project ?
If possibly using JS/Jquery anyway, I'd suggest you don't need multiple summary screens but instead a a single summary screen from OWD with a single list of goals presented by default. Use JS to add a search function and dynamically modify the HTML to make the sorted/grouped lists appear as you desire (on the same page without any requests to the server). Only upon clicking on a goal would the question pages in pursuit of the selected goal begin.
You might get some good ideas on implementation from the searchable combo-boxes in v10.4.1 - summary video available at: http://www.youtube.com/watch?v=PmmQeFt6qCQ&list=UUtUHPDCD1EFH_ftnhR_i-dQ&index=5&feature=plcp shows the properties that control behavior.
You'll probably want to look at the velocity templates in \Release\web-determinations\web-inf\classes\templates\ (after a build). Look at question_screen.vm for an example of how the comboboxes are rendered and for javascript inclusion within a velocity template. Also look at summary_screen.vm as that is what renders the summary screen and will likely be where you will want to add your JS search functionality. (also shows how the list of goals is rendered by default). -
My old version of Firefox had the option for me to set multiple home pages. My hard drive recently failed and had to be replaced, so I had to install the newest version of Firefox. The only option I see when I go to tools, options, general is to set the one home page. (and maybe tabs) I would like to open several of the same pages every time I open my Firefox. Does anyone know how to get this back, or which version had this feature so I can downgrade to that particular version?
Also, I was wondering if there is a way to get the bookmarks I had on the old version back. I think they are lost forever, but if anyone knows, I would be thankful. I do still have the old hard drive, but the way it failed was actually when you tried to open any browser, the hard drive would go and blue screen, this is why the old hard drive had to be replaced. Thanks. :)So you mean you want to open new windows with the same page when you open Firefox?
[[How to set the home page#w_set-more-than-one-website-as-your-home-page|Set more than one website as your home page]] should help if you want to open multiple pages when you open Firefox.
As for recovering your bookmarks, you can try to plug that hard drive into a working computer, and then read [[Recovering important data from an old profile]] to copy your bookmarks from it. However, if it is failing you may not be able to do that. -
Multiple Header line in Receiver File adapter
Hi,
I have an issue in Receiver File adapter with multiple header lines. I am able to get only 1 header lines in the receiver file but not multiple header lines with 'nl' since it is static in file mode
[CommunityTag:Header]
empNo,EmpName,Age
[CommunityTag]
I tried with the below in content conversion one as below with no luck
Root.addHeaderLine=1
Root.headerLine=[CommunityTag:Header] 'nl' empNo,EmpName,Age 'nl' [CommunityTag]
Root.fiedSeparator=,
Root.endSeparator='nl'
I am getting the Header line as same row as static text.
Can you advise this.Hi Gabriel, I suggest to produce the header lines from additional nodes in the message payload. That means you need to modify the data type of the target message in order to generate an extra structure in the payload. Use constants in message mapping to generate the header column names, e.g.
<Header>
<H1>CommunityTag:Header</H1>
<H2>empNo,EmpName,Age</H2>
<H3>CommunityTag</H3>
</Header>
In content conversion you have to convert the Header row with
Header.endSeparator='nl'
You won't need parameter addHeaderLine anymore then.
Regards, Martin -
I have a Macbook Pro using the 10.7.4 version. I recently bought a Brother HL-5470DWT Laser Printer. I can't seem to tell the printer to print multiple size pages in my pdf files.
No matter what I do it still prints all the documents as 8.5x11! It isn't pulling the paper from both printer trays.
Please Please help me out....
debContact Brother tech support.
-
Rearrange pages when printing adobe form with multiple master pages
Hello!
Good day to you all.
I have an issue in regards with printing my adobe form with multiple Master pages. I have 4 master pages:
1st master page: a
2nd master page: b
3rd master page: c
4th master page: d
all with different headers and footers all having the same contents (items). I don't have issue with one page content (it just prints 4 pages with different headers and footers). The issue comes out once the items exceed 1 page.
What happens is that the preview/print shows (example: 3-page item)
a1-a2-a3-b1-b2-b3-c1-c2-c3-d1-d2-d3.
What i need is to print these such that all 1st pages of the 4 master page to be printed first, then all the 2nd pages, then all 3rd pages. Please see below:
a1-b1-c1-d1-a2-b2-c2-d2-a3-b3-c3-d3
This is because we will be using carbonless copy paper during printing and it's possible that it would be printed on batch jobs. Please suggest ways to do this.
Thanks a lot in advance!
Best Regards,
abap_peer_dangsHi,
Is that requirement of multiple pages as groups only at the time of print or at print preview also...?
Can you have a Print button on this screen or you should be using the Abobe toolbar's Print button..?
Well if this on a click of a button in the form and the requirement is only at the time of print and not on print prieview I can have a JS script which does this...
Let me know if this suffice, I can try with a local file and send you the script.
@ Chris: I didn't understand what do you mean by reported, I was eager to hear and learn a solution from you may be a new approach which I am not aware of ...?
Cheers,
Sai. -
WHEN I TRY TO OPEN A PDF FILE, THE READER OPENS HUNDREDS OF MULTIPLE BLANK PAGES .
I TRIED TO OPEN A PDF FILE ALL I GET IS HUNDREDS OF EMPTY PAGES
WHAT IS THE PROBLEM WITH ADOBE 9 READER?
OTHER PEOPLE CAN OPEN THE SAME MSSG WITH NO PROBLEMI DID THE UNINSTALL AND INSTALL DID NOT SOLVE PROBLEM
STILL OPEN MULTIPLE EMPTY PGS
WHAT CAN I DO?
Date: Wed, 14 Apr 2010 10:28:56 -0600
From: [email protected]
To: [email protected]
Subject: WHEN I TRY TO OPEN A PDF FILE, THE READER OPENS HUNDREDS OF MULTIPLE BLANK PAGES .
Something is definitely wrong with your install of Reader.
A PDF consists of only the number of pages it was created with. Reader can and will only open those pages... IF it's installed and working properly.
Opening multiple blank pages from a document which contains none is a clear sign that the software isn't functioning. It's like putting a movie into a DVD player, and your TV starts a picture slide show of your last Summer's vacation. Not possible unless there's something seriously wrong.
Uninstall Reader 9.
Use either Adobe's clean uninstaller or Windows Installer Cleanup Utility (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2. exe) to remove all Reader installer files from your system.
Reinstall Reader 9 from a new download (do not use the old one if you still have it on your system)
> -
Check on multiple header line data.
Hi All,
I have one requirement where i need to check the multiple accounting document header line.
Kindly suggest how to check the above requirement.
Thanks in Advance!
Regards,
ChiragHi All,
Sorry for the short description.
Currently i am validating only the one header line data of expense spread sheet file with vendor. but the now requirement has changed and there can be a multiple header line item also.
So i need to check for each header line item whether vendor already exist or not.
I am able to check it for 1 header line item, Kindly suggest how to check it for multiple header line item.
Thankyou.
Chirag -
Multiple blank pages follow body of message in webmail
Approximately after the update to iOS 7.0.2 and whatever version of updated Safari, when checking web mail using Safari, I get multiple blank 'pages' at the bottom of emails. These multiples will grow in number/size each time I view a message. If I try to print a message out using Airport Extreme and a compatible HP wireless printer, the blank pages ( with notation of the page number, etc.) will number in the hundreds and as high as 1600. I have spoken with Apple customer support and with HP customer support and they have found no problems with my iPad3. If I forward my problem email to someone running an original iPad with the iOS 5 and older Safari, they open the mail in web mail through the same provider (noip.com) and have no problems with the lengthening blank space on the bottom of the emails. Not a perfect test perhaps, but.... When looking at the message source, there is no apparent blank space or coding after the end of the body of the message. I know I can retrieve my mail using Mail and IMAP on the iPad. But, if possible would like to figure out what is the issue if I can before I switch over.... Has any one got ideas as to what could be causing this?
Thank you!Tap Settings > Safari
Tap to clear Cookies, Data, and History
Then reset your iPad.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then try printing a page from email in Safari.
if that didn't help, tap Settings > General > Reset > Reset All Settings
Then restart the iPad and try again. -
Hello ,
I have a requirement to display Multiple heading in ALV Grid, I am using the Class 'cl_gui_alv_grid'. please let me know if you have Any suggestions.
Ex:
| Divison |
Sub D:1
Sub D: 2
Sub D: 3
Like wise i have few more divisions to display and Under we need to display the Sub Division also .
Thanks in Advance.. Waiting for your suggestions.
With Best Regards
NagsHi,
I had attempted to do it in the object oriented way, but found no ready solution, so I settled for the below solution.
Please use the function REUSE_ALV_COMMENTARY_WRITE.
This allows you to print multiple lines in the header.
I had a requirement of showing 5 lines in the header.
So i went on like:
DATA: it_list_commentary TYPE slis_t_listheader,
wa_list_commentary TYPE slis_listheader.
wa_list_commentary-typ = 'H'.
wa_list_commentary-info = <text>.
APPEND wa_list_commentary TO it_list_commentary.
wa_list_commentary-typ = 'S'.
wa_list_commentary-info = <text>.
APPEND wa_list_commentary TO it_list_commentary.
I fed he internal table with all 5 lines like above.
Finally I called the function.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_list_commentary.
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Jan 28, 2009 6:14 AM
Maybe you are looking for
-
Troubleshoot Error - Unable to perform table-based value assignment config
After to creating class, characteristics, and value assignment type, the system is unable to perform table-based value assignment configuration. The following error is displayed:
-
How to deinstall Adobe Drive - This is very nasty
Hello all, during the installation of the TCS2, an application called Adobe Drive has been installed as well. This was not announced, there was no way to avoid the installation and now it cannot be selected in the system settings for deinstallation.
-
Is there a way to get my iPod touch to charge using an Alpine CDA-9856
I have had the Apline CDA-9856 for several years (about 6) because I wanted to use it with my iPod (I had an old mini at the time, followed by a nano) and had no issues until I started using my daughter's iPod Touch. It works fine, except for it won
-
Hello, i want to integrate LSO in Portal, i follows https://websmp106.sap-ag.de/~sapidb/011000358700004942762004/, but i havent idea how to find "SAP Learning Solution iView", because iviewstudio is not working, 2. Edit the Web Application Server --
-
Yep a Duplicate Tracks Question, Again!
I had a problem with the file structure on my Power Mac becoming unstable and took the machine in for repair. Coincidentally I asked for a WD bigger drive I fitted sometime ago to be the boot drive. As the reason for the disintegrating file structure