Multiple Hyperv connected to singel network over Wifi

Hi All
I have a Problem when connecting more than two hyperv and their Hosts to the same Network. As soon as i connect the third the connection looses 99% of the pings. On the Hyperv Hosts i have created a external switch with the wifi Adapter connected to
it. As expected the System creates a Network Bridge. On every System there is one VM and the host connected to the virtual Switch.
I have tested it with 3 different Accesspoints. In the last Scenario i just used one accesspoint with fixed ip addresses and tryed to ping the VMs on the other Hosts. The result was the same. As soon as i connected the third hypervisor and its
vm to the wifi the communication broke down.
Does anyone have an Explanation for this?
Thank you.

Hi,
Could you offer more information, such as which system version you are using.
In some desktop computer you just can choice one type connectivity, if you choice use the wireless network please shutdown the wire network.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

My Iphone 5 won't connect to a network or wifi

My Iphone 5 won't connect to a network or wifi, I just got the phone less then a month ago.....It is driving me nuts and I don't know how to fix it!I

Have you read through the user guide and taken basic troubleshooting steps? What have you done so far to troubleshoot?

Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

How connect to windows network via wifi?

i try to connect to my windows shared network via wifi,but it doesn't work.
here's the error message
please help me to solve this problem
thank you.

Check the settings on your iPad for automatic downloads.....
Settings>Store>Automatic Downloads>Apps. If it is enabled, turn it off. The apps shouldn't download again as far as I know, but this is a good a place as any to start.

Can't connect to wireless network but wife can...

Hi. I've just bought a Macbook pro. I am trying to connect it to a wireless network. The macbook finds the network (and others), but after I give the correct password it says 'authentication failed'. The weird thing (to me) is that my wife can connect to the same network with her macbook with no problems. These are my Airport details (no working connection)
Software Versions:
Menu Extra: 6.2 (620.24)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2 (620.24)
AirPort Utility: 5.4.2 (542.23)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x8D)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.26)
Locale: ETSI
Country Code: DE
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
Wake On Wireless: Supported
Status: Not Associated
and these are her's (working connection)
Software Versions:
Menu Extra: 6.2 (620.24)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2 (620.24)
AirPort Utility: 5.4.2 (542.23)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x8D)
Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.26)
Locale: ETSI
Country Code: DE
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
Wake On Wireless: Supported
Status: Connected
Pretty similar......
We are both running 10.6.2 with all the latest sofwtware updates. Does anyone have any suggestions as to what might be up? The router is a Netgear DG834Gv5, again with the latest firmware. Security is WPA2.
Thanks in advance,
wrathkeg

Two things I'd check first:
1 - in your router, do you have mac address filtering turned on? If so, add the mac address (Airport id) of your MacBookPro to the 'Wireless Station Access List' in your router. You can find your Airport id under *System Prefs > Network > Airport > Advanced > Ethernet* .
2 - in your MacBookPro, turn Airport OFF. Then go into *System Prefs > Network > Airport > Advanced.* In the Preferred Networks box, delete the wireless network you are having trouble authenticating with. Click OK, then Apply. Exit System Prefs. Then turn Airport ON. Find the network; re-enter your password. See if that fixes things.

Trouble connecting to home router over wifi

Just yesterday I started having problems connecting to the wifi signal in my home. I am able to connect just fine to any other wifi signal. The problem is that I'm able to connect, but cannot transmit data for more than a few minutes at a time, it just stops working. Last night I was able to get it working for about 2 hours then when I woke up this morning it was back to not working. All the other computers in the house are having no problems at all, mine is the only mac in the house. We have a linksys wrt54gs router. I'm not sure whats going on. I've tried resetting the PRAM and the SMC settings to no avail. I've also noticed that when connected to my home network, another category shows up in the drop down when you click on the wifi in the menu bar. It says Devices, and it's got my network there with a check mark. I have never noticed this before, and cannot find any information about it anywhere.

There are lots of people with WiFi routers and other devices using the same bandwidths these days. It's possible that a neighbor just bought one and it is configured to use the same channel yours is on.
You might try downloading AirRadar (free trial from Koingo software --> http://www.koingosw.com) and see how many networks are in your area and what channels they are using. It also displays signal strength and 'noise' levels and a history graph.
My MacBook regularly dropped the connection to my old inexpensive 'b/g' router, regardless of which wireless channel I selected (it was all manual configuration). My new 'draft-n' router has the built-in 'quality of service' diagnostics, and can switch channels and adjust signal strength as needed.
It's 'normal' for the wireless network you're attached to to be displayed with a checkmark on the Airport dropdown menu.
If you press Option and click on the Airport icon, you'll get a bit more information about your wireless connection, including what channel you're currently using and the speed of the connection.

After lollipop update, native email app and third party email apps cannot connect to email server over wifi, only on 4g

Updated to lollipop yesterday. Now I cannot access email server (POP3) on wifi, only over 4G. This is happening on native email app and third party apps such as K9. Any help appreciated.

We're terribly sorry to hear about the email issues. Let's get this resolved immediately. Since the update, have you tried to delete and re add the email account?
SheritaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Connecting to DSL network over Ipod Touch Wi-Fi

Having trouble connecting to a DSL wireless network. Is this even supported or possible?

Never spit into the wind.
Never engage in a land war in Russia during the winter.
Never eat anything bigger than your head.
I had no issues or problems, I just selected my network and input my password.
If you are having problems, what is happening?

Mail won't send emailwhile connected to Ethernet, only over wifi

Here it goes.
I have an iMac 21.5-inch, Mid 2011, with Mac OS X Lion 10.7.4. The issue I have is that when I try to send an email, using Mail, from my company's account it will not do so while the computer is connected to Ethernet.
If I go to network settings and disable that option, connecting trough Wi-Fi, it sends the emails like a charm.
Has anyone experienced something like this?

If you're on the company network, you should ask the network administrator for help.

Can it connect to internet network without wifi connection?

Let's say my house doesnt have wifi connection, can i still connect to apple tv with LAN cable connection? If it works, can i still connect to my apple device from the apple tv?

Yes, you can connect with Lan cable without WiFi

Cannot connect to email server over wifi

After updating to ios 6.0.1 on ipad I am unable to connect to exchange 2003 server while connected to internal office wireless.
This has happened on two new ipad setups. Any help would be greatly appreciated.

Hi !
And thanks for your fast reply. I think I have already solved my problem !!
I was reading some of the other posts here and found on that did the trick !!!!
All I had to do was "reboot" the iPad by "Hold down the sleep/wake button and home button at the same time until it shutsdown, then keep holding it until the Apple logo appear." I didn't even have to delete the mail account
Hope this helps others with the same problem....
Thanks !
tzbikowski
Update: It connected and downloaded new mail .... but just tried to send an email and got an error that it could not send . I'll try removing the email account,shut down and try to reload the account. Will update what I find out .

Cant use iphone4 wifi connect with home network

Updated iphone4 version 4.3.2 the phone still cant connect with home network via wifi! When before updated was everything normal!
Could anyone help?
I switched the rounter on and off and the securty ps from the rounter is correct! But it keeps sayin cannot connect with xxx network, and i have to keep "dismiss" it!
Please help, is the iphones problem or my rounter?

ive tried that also, completely disconnecting the modem and router but still same problem, updated iphone software, reset factory and network settings.. still nada thanks for your input tho

IPhone WiFi will not connect to home network.

iPhone will not connect to home network. WiFi is on and correct password is entered. iPhone error msg says incorrect password. Reloaded network software and did not activate password but iPhone still shows network as locked.

Some people who experience issues connecting to or even seeing there Wireless network should follow these steps.
These steps are just a guideline and its not 100% that it will fix your issue.
Mainly, if the issue persists, its possible there is an issue with your iOS settings or a hardware failure within your iPhone or iPad, specifically the Wifi adapter.
You would want to follow these articles to do a reset & restore prior to saying it is a hardware issue.
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414
You will need to access your Admin control panel for your router.
If you have an Airport Extreme BaseStation, you just need to open the Airport Admin Utility found in Applications > Utilities Folder.
Enter your credentials and you will have access to the settings from there.
For a PC: Do NOT use the CD that came with your router. That is used for people who do not know how to setup a router properly and these settings will not be available for you in most cases.
If you are using anything other than an Airport BaseStation:
Open a web browser:
In the address bar, type:
192.168.1.1 (Mainly used for Asus, Linksys, etc) or 192.168.0.1 (D-link,Belkin)
How to figure out what the IP address is to type in?
Windows:
Hold down the windows key, then press R. This brings up the run box. In that box type "cmd" (without the quotes) and press enter. In the black box that pops up, type "ipconfig" (without quotes) then hit enter. Your default gateway is the IP address for your router. It will start with 192.168.....
Take that number and put it into the address bar in your browser and hit enter. It will then ask you for a user name and password. For linksys, it's admin for both. If you have another brand, just google "default password for ******" replacing the asterisks with the brand name of the router. Once you have entered the correct user name and password, you're there.
Mac:
1.From the Apple menu, select System Preferences.
2.In System Preferences, from the View menu, select Network.
3.Select the appropriate port. For example, choose Ethernet for broadbandconnections, AirPort for wireless, or Internal Modem for dial-up.
4.Click Advanced... , and in the sheet that opens, click the TCP/IP tab.
The number next to "Router:" is your default gateway.
Once you get into your admin panel do these setting changes.
1.On the router change the channel for the 2.4mhz band to channel 1, 6, or 11 (recommended), rather than auto.
2.Also set that channel width to 20hz only, rather than 20hz or 40hz (Auto)
3.Make sure Security is set to WPA/WPA2-Personal. Anything else will cause issues. (of course, make sure you know your password for security)
4.Make sure to Apply/Save these settings. Sometimes the wireless connectivity will go out during this change and will come back on within 15-30 seconds.
5.On the iPhone/iPad go to Settings > Wi fi > click the blue arrow beside the network > Select Forget network
6.Go to Settings > general > reset > reset network settings
7.Power the phone off and on. Connect again
For additional assistance in troubleshooting Wifi connection problems go here: http://support.apple.com/kb/TS1398

TS1398 Having trouble accessing the internet over wifi on my iPhone 5.

Hello, I have a nearly brand new iPhone 5 in perfect condition. So far, I have had not problems with it, however recently, I have had major issues connecting to the internet over wifi. Some things that would happen would be apps that require an internet connection time out, and pages don't load in safari, and the reliabilty would be off and on.However after switching the wifi off and going off of my 4g, the connection was fast and I experianced no problems. I am positive this is not a problem with my home network, because my household had lots of people and LOTS of electronic devices that connect to the internet with no problem. I also have an ipod touch 4th generation that has been able to connect and browse the internet with no problem, it's just the iPhone that is being slow. Also, this isn't really a consistant pattern, occasionaly I will get it to work for like five minutes with no problems then it just time out on whatever it's doing.
Any help would be appreciated.

Well it might still be the Mavericks Wifi issue... slow throughput on an apparently strong signal is part of its behavior from what I've read. So to recap You got a signal (fairly Strong) appeared to be connected but Safari could not display the welcome page.
I'll share something I do in a case like that. I use Firefox. I keep a copy of Firefox, Opera and Chrome on my laptop because some sites use non-standard web code and the different browsers "play" better with the server/router. Safari is a lot better than it was when it first stared out but there are some sites put together (especially financial sites) that just won't let Safari play (they can code to prevent that).
If you have time between flights download Firefox and give it a shot... at this you have nothing to lose.
Good Luck.

HT4946 automatic back up over wifi ios 6 devices

using latest itunes 11 and ios6.0.1, is there a possibility to back up automatically every 24h or so or whenever the device is connected to the power over wifi? iPhone 5 iOS 6.0.1 and iPad 4 iOS 6.0.1

If you use iCloud:
http://support.apple.com/kb/HT1766

Multiple Hyperv connected to singel network over Wifi

Similar Messages

Maybe you are looking for