Multiple I/O's at one time...

I recently purchased a M-Audio Profire 26/26 to connect to AA 2.0, which works fine on it's own. I also have a Lexicon Omega that I was hoping to use in conjunction with the Profire. I have AISO4ALL already installed and have used it in the past. However, When I set up a channel via AISO to my profire and another to the Lexicon, AA will not record. Only if I select one at a time will AA record.
Is there a way to set this up to allow the 8 channels from the profire and 4 channels from the Omega to be recorded simultaneously?
Thanks!

sonorboy wrote:
I recently purchased a M-Audio Profire 26/26 to connect to AA 2.0, which works fine on it's own. I also have a Lexicon Omega that I was hoping to use in conjunction with the Profire. I have AISO4ALL already installed and have used it in the past. However, When I set up a channel via AISO to my profire and another to the Lexicon, AA will not record. Only if I select one at a time will AA record.
Is there a way to set this up to allow the 8 channels from the profire and 4 channels from the Omega to be recorded simultaneously?
Thanks!
ASIO as a standard can only cope with one sound device in your system. If you want to use more than one, then you have to use ASIO4ALL to convert Audition's ASIO stream back to WDM, and use this to talk to the other device. You can quite happily share ASIO channels this way in principle, but it can be a right pain to set up, and there are inevitably latency differences between the two devices - even assuming that you can get them to work like this at all. And that's not guaranteed.

Similar Messages

  • Multiple entries in TEVEN for one time event created by HR-PDC

    Hi experts,
    we have a SAP certified time attendance system connected to our ERP 6.0 system by HR-PDC interface.
    Now it happens from time to time that exactly one time event causes multiple entries in SAP table TEVEN and therefore is shown in the check report PT40.
    The number of duplicate records is always different - up to about 140 entries for one and the same time event in the worst case.
    Except the field PDSNR all the other fields contain exactly the same values.
    I have checkt many of the problematic bookings and I have always just one correct time event in the source application and there is only one data record in the corresponding IDOC too.
    Also the number of transferred records shown in the protocol spool of the report SAPCDT45 is correct and identical to the number of records in the IDOC.
    The first place where I can identify the problem with the duplicate records is the table TEVEN.
    No records are left in the interface table CC1TEV.
    I have seen that within one block of identical time bookings in TEVEN the field PDSNR ist not numbered in one sequence but there are gaps in between that are used for any other entries.
    As I can see in historical entries of TEVEN the problem exists already for years so it does not seem to be in direct connection with the latest support pack or something like that.
    The relevant jobs run every 15 minutes whereby SAPCDT45 is started 5 minutes after RPTCC106.
    Has anyone else experienced this strange behaviour or knows what I could further investigate?
    Many thanks for your replies in advance and best regards
    Günter

    Hi Carlos,
    thanks for your fast reply.
    It seems that an entry for Status A00 or A05 would solve my problems and of course I will try to handle it by this view.
    But do you know whether there is any possibility to find out how it comes to these repeated postings?
    I do not know whether the repeated postings happen in the same package (IDOC) or in an earlier package and to be honest I do not think that the record comes from the source application a second time because there I could find only one record that seems to be correct.
    I also cannot understand how it comes that I have even 140 "identical" entries for one time event.
    Could you please let me know your thoughts about that?
    Anyway I thank you for offering a solution - even if I do not understand the reason for the pborlem.
    Thanks and best regards
    Günter

  • How do I select multiple files for download at one time?

    I'm trying to batch download 24 files at one time. Firefox will only let me select one file at a time for download. Is there a way around this?

    try flash got and DTA plugins

  • How to move multiple images in lr at one time from one subfolder to the next?

    How would i accomplish this procedure in lr5. I know you can click on an image  and drag it to the target folder.  But for multiple images this is the ? Thanks!!

    Same as you would do it in your operating system.
    You select multiple images (click, ctrl-click, ctrl-click, etc., or click on one image and then shift-click on another image to select the entire sequence) and then drag.
    Of course, you might also want to simplify your life and develop a workflow where you don't have to move photos from here to there by using keywords instead of folders to organize.

  • Clearing out multiple email from iphone at one time

    Is there an easier way to delete or empty the multiiple mail from an iphone? I just got this phone & after synching with my laptop, it says there are over 6,000 messages. With my blackberry, all I had to do was hold the caps button while I scrolled & selected as many emails as I wanted, and could delete them all at once. The iphone makes you delete one at a time (very tedious).

    You can select more than one email at a time to be deleted by selecting the Edit button at the top right of the mailbox and selecting the emails you want to delete by scrolling through the mailbox. Select Delete at the bottom left of the mailbox and all emails selected for deletion will be moved to the account's Trash mailbox. The account's Trash mailbox includes a Delete All selection.

  • Can I use Signal Express for multiple customers for only the one time $699?

    How do I go about distributing Signal Expresss applications to multiple customers?

    Hi Nutter,
    Unlike LabVIEW, Signal Express doesn’t have any file distribution capabilities.  If your application uses only basic features, you could install the free LE version of Signal Express on as many computers as necessary.  If you need the full capabilities of Signal Express, however, you would need to purchase a license for each customer.
    An alternative to paying for Signal Express for each customer deployment would be to generate LabVIEW code from the Signal Express project and create an executable.  This process is described in the Knowledge Base articles Generate LabVIEW VIs from Signal Express and Deploying VIs generated in Signal Express.  Note that this method requires that you have LabVIEW installed on your development computer with Application Builder capabilities.
    Regards,
    Message Edited by Luke G on 05-02-2007 12:23 PM
    Luke
    Applications Engineer
    National Instruments

  • I am having issues uploading and sending via email pictures and videos today. Anyone else having this problem? Also, anyone know how to upload multiple pictures to Facebook at one time?

    Post relates to: Pre 2 p102eww (Verizon)

    Jneklason wrote:
    ~snip~
    I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
    On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
    I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
    I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

  • HT204266 How to purchase something from the app store using multiple forms of payment at one time?

    I am trying to purchase Final Cut Pro from the AppStore in multiple forms of payment. And I am just a bit confused as to how to accomplish this. I recieved an Apple Gift card of half the cost of the program, and I wanted to use that then pay the difference of the cost with a credit card. How do I set this up? I need to download the program tonight, so if someone in the community could get back to me ASAP, that would be greatly appreciated.

    Settings > General > Restrictions > Installing Apps > OFF
    Settings > General > Restrictions > In-App Purchases > OFF
    Settings > General > Restrictions > Require Password > Immediately

  • How can I install multiple packages in one time?

    I use Software Update on this PowerBook to download, keep the packages and install onto my 3 Mac's.
    The question is how can I install multiple packages (update stuff) in one time (as we can do with Remote Desktop)? Just to save my time from retarting the machines for every single (required) packages.
    Many thanks, and happy new year.

    320/2766
    Happy New Year Ekapon,
    Instead of downloading the packages in advance,
    check (Software Update default) every software you need, then choose "Install & Keep Package" from the Install menu.
    This will install everything without needing to update prebindings and restart between each installation.
    Axl

  • Multiple file uploads, or only one at a time?

    I have multiple files in folders on my iPad.  I want to upload entire folders of documents.  So far I have only been able to upload one document at a time.  Then after uploading, I have to put them in acrobat.com folders one document at a time.  It is very time consuming.  Is there any way to upload multiple files at one time?  Once the documents are uploaded, is it possible to move multiple documents into a folder at one time?  Or does each document have to be a separate upload action, and each move into folder a separate document-by-document one at a time?

    On my iPad I have been opening and saving pdf's in Adobe Reader.  I would like to upload these pdf files from the iPad Adobe Reader to acrobat.com.  I have thus far been uploading them from the iPad one fie at a time.  It is very slow and tedious.  There is also no way to get multiple pdf files from the iPad Adobe Reader to a computer except one file at a time.  So it seems that once I used the iPad Adobe Reader app to save the files, I am stuck with one file at a time movement.  I did, however, find that once I get files to acrobat.com, I can move multiples files at a time into folders on acrobat.com via the iPad.  The problem is getting them uploaded from the iPad Adobe Reader app to acrobat.com. Is there a solution I'm missing, or am I correct in my understanding of the iPad Adobe Reader app upload situation?

  • I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

    I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
    In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
    For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

    Right click any tab and choose "Bookmark All Tabs".

  • How can I convert multiple files at one time and not one at a time

    How can I convert multiple files at one time and not one at a time

    Hi Plissey1950,
    Sorry for the lengthy delay to a response.  Are you trying to convert multiple files to individual PDF files at the same time? (not combine them).  If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
    Thanks,
    David

  • How can I activate multiple tags at one time?

    How can I activate multiple tags at one time?

    I'm pretty sure you can run this on a sub tree of /etc/tags
    http://dev.day.com/docs/en/cq/current/wcm/page_publish/tree_activate.html

  • How do I select Multiple Pdfs at one time when I am combining files?

    How do I select Multiple Pdfs at one time when I am combining files?
    I can only select one pdf at a time.

    Hi,
    Please use either Firefox or Chrome to selelct multiple files.
    Thank you.
    Hisami

  • How do i delete  multiple emails at one time from iphone Mail account with iphone 4s?

    how do i delete  multiple emails at one time from iphone Mail account with iphone 4s?

    Better than that!
    http://www.youtube.com/watch?v=fKa-KFjUIGE
    Select a message, hold the move button, deselect the message while still holding the move button.
    A new window appears allowing you to move all messages to the trash.
    Bingo!

Maybe you are looking for