Multiple i pod question

my brother had an i pod first then i bought an i pod touch and it worked great then he bought an i pod touch and now the apps go to his i tunes account not mine ....any way to switch this....its really annoying... we share a computer and ive tried logging on and going through the settings and syncing my i pod touch again... help would be greatly appreaciated

If you have separate iTunes account log-ins, you need to have separate user accounts on your shared computer to maintain separate iTunes Libraries, so that you each get your own purchases.

Similar Messages

What could be causing my multiple response survey question to show a non-response in LMS report?

I have a 10 question survey that has been running fine and providing accurate responses in reports generated from my LMS. I made a property change to a multiple response type question that is now causing the reports to show a date/time (2003-01-01 18:00:00) response instead of the actual multiple responses the user made. The change I made to the question was to change the "Numbers property from" [ a), b), c) ] to [ 1), 2), 3) ]. This property change did not affect the reported responses for the single response questions, only the multi-response. This problem occured Using Captivate 4. I then tried using the same properties in Captivate 5.5 thinking it was a bug in CP4, but got the same results. Has anyone else run into this issue? I'm going to bring this to the attention of my LMS provider, but want to make sure CP is clean first.
Thanks,
Dave

First things first. I am not an LMS expert, so this is not about troubleshooting.
However, to ensure that your course works fine on a SCORM-compliant LMS, you can upload it to cloud.scorm.com and test it out. If the course works fine there, rest assured that it will work fine on any SCORM-compliant LMS. If your LMS team comes back with an issue after this, you can counter them with this evidence that the problem is with the LMS and not your course.
Sreekanth

Partial-credit scoring in multiple response and multiple hot-spot questions

Hello everyone,
I'm calling on your generosity in the spirit of the holidays to help out a noob. I would like to create matching, multiple-response and multiple-hot spot questions where the user receives credit based on the number of correct answers within the question. For example, in a matching question where there are four items; if the user gets 2 out of the four items matched correctly, I would like for him to receive 2 out of 4 points.
I understand that Captivate doesn't support partial-credit scoring of this type, but a few posts have implied that it can be done with variables. Is there anyone who can walk me through this process, or send me to a link that will walk me through it? (I've scoured these forums and tried the Cp tutorials, to no avail.) And if it's not asking too much, please make it understandable to someone who has very little experience with variables.
Thanks, and Merry Christmas.
JR
(Running CP 5 on Windows Vista)

Hello,
I did publish an article more specific on partial scoring, perhaps this could help you:
Partial scores and customized feedback
And since you are asking for more basic information, on my blog I point to some other articles to explain the meaning of variables with/without advanced actions. Feel free to have a look (there are more postings about advanced actions and links to articles over there):
Curious about variables ?
Unleash the power of variables with advanced actions
Lilybiri

Multiple Headphone outs question

Hi there,
I recently asked for a bit of help getting my home studio setup sorted and I just need a bit more advice please!
While I'm experienced in the live room of a studio, I'm still very much an amateur on the other side of the glass! Basically I'm just putting together a basic setup to track some demo's / ideas with my band. So far, I've got a Motu 8PRE interface running the drum and instrument mics into Logic and the outs from the 8PRE going to the monitors. My question is this...
How do I set up multiple headphone outputs with independent mixes so band members can have a custom mix in their headphones? I'm having a hard time figuring out how this would work and have no idea what I need to do in Logic to set it up, and also what hardware I might need.
If anyone could explain this, both how to set it up in Logic and the kind of hardware I would need that would be fantastic!
Many thanks in advance

1) Yes
2) Sorry - I assumed that box had 8 outs too - I assumed wrong. You could get an additional multi-channel interface which accepts ADAT inputs as well as analog, which would give you great flexibility. MOTU makes several - better yet check out RME, Focusrite, and others. There are dozens on the market - it depends on your budget and future expansion plans.
3) Yes, or a headphone distribution system - but again, your budget will determine this. Hear, Furman and Aviom all have systems. Or for much less, Presonus headphone amps. Depending on your physical set up, you might need a snake unless you're using an already wired recording room.
Good luck.

Multiple I-pods on one computer

My Wife had a Sony MP3 player, which Sony no longer supports. She bought a new I-pod and wants to put all of her Sony songs into my I-tunes (we have a single lap top computer). How can we seperate her songs and my songs and have the ability to sync her i-pod and mine seperately and distinctly with a single laptop and one version of I-tunes on that laptop?

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single Mac or Windows user account
c) Creating multiple Mac or Windows user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): iPod - Syncing Music
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod and iPhone
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page: Adding songs to iPod shuffle - Windows
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Using Windows XP User Accounts

Multiple Column Report Question

Post Author: LCS213
CA Forum: Crystal Reports
I'm creating a student transcript report that has multiple columns, and is three groups deep. The first two groups need to be in a columnar layout. However, I'd like the third group to contain a subreport that spans the width of the entire page.
Are there any options within Crystal XI to do this? I know in the Section Expert, i can format the detail level with multiple columns, and on the Layout tab, I can select "Format Groups with multiple columns". But that seems like it either formats ALL groups or NO groups. Am I mistaken? Is there a workaround I'm missing?
Thanks in advance for any help on this issue!

Hi Dan,
According to your description, we are not clear about the “6 sections for each Additional task”. Do you mean six data records? If so, based on my understanding, there are three groups and eighteen records in your report. You want to make those records appear
on eighteen separated pages, right?
In Reporting Service, we can add a page break to groups within data regions to control the amount of information on each page. In your scenario, you should add page break to group “Sub task”, group “Additional Task” and details. As we tested in our environment,
add page break to these records, the report appears in eighteen pages. Please refer to steps below:
1.On Group Properties of Details1, choose “Between each instance of a group” option on Page Breaks page. Please refer to screenshot below:
Choose same option on Group Properties for group “Month” and “Name”.
2.Click drop-down button next to Column Groups, then choose Advanced Mode.
3.Click on Static under Row Groups, set RepeatOnNewPage as True in Tablix Member Properties.
4.Click Preview, the results before and after adding page break look like below:
If you still have any question, please post some detail information or screenshot about the report design you expect.
Best regards,
Qiuyun Yu

Multiple page report question

My client would like to run a report by project. A project can have multiple sub-tasks and each sub-task can have additional tasks. Each additional task has 6 sections on the report which all need to be separated by page breaks. The report
need to separated by the additional tasks so in the example below I would have 18 pages of reports, grouped by Sub task and Additional task. How do I group this report to make it work correctly? Would sub-reports work better - still having trouble
with the grouping issue as well on those.
Project
         Sub task 1
                      Additional Task1
                      Additional Task 2
         Sub Task 2
                      Additional Task 1

Hi Dan,
According to your description, we are not clear about the “6 sections for each Additional task”. Do you mean six data records? If so, based on my understanding, there are three groups and eighteen records in your report. You want to make those records appear
on eighteen separated pages, right?
In Reporting Service, we can add a page break to groups within data regions to control the amount of information on each page. In your scenario, you should add page break to group “Sub task”, group “Additional Task” and details. As we tested in our environment,
add page break to these records, the report appears in eighteen pages. Please refer to steps below:
1.On Group Properties of Details1, choose “Between each instance of a group” option on Page Breaks page. Please refer to screenshot below:
Choose same option on Group Properties for group “Month” and “Name”.
2.Click drop-down button next to Column Groups, then choose Advanced Mode.
3.Click on Static under Row Groups, set RepeatOnNewPage as True in Tablix Member Properties.
4.Click Preview, the results before and after adding page break look like below:
If you still have any question, please post some detail information or screenshot about the report design you expect.
Best regards,
Qiuyun Yu

Multiple TOCs Security Question

Hello,
Just getting started with RH7. I'm building a project with
approx. 30 TOCs and will be limiting access to them for multiple
user types for a software application. I had a question from the
tech group and am wondering if someone can help. Forgive me if this
seems like a 'duh' question... just not thinking about this
straight. The tech guys are concerned that if we publish multiple
TOCs that they then integrate into each of the user groups for the
app, security from one group to another might be an issue. The
system is educational and the concern is that students might be
able to get their hands on the help files since they sit on the
server. Again - new at this and want to know if anyone has
encountered this or if there is something that I can tell them to
help them wrap their minds around what is actually produced when
webhelp is published so that they can build in the proper security.
As a further note, each user group enters a password protected
area.
Thanks so much for not laughing and for helping!

Hi PeggyUF and welcome to our community
Wow, 30 TOCs? I'm unclear on exactly how you will be limiting
access. Are you building 30 different versions of your help? That's
the only way I can fathom using 30 different TOCs. You certainly
can't do it by publishing a single WebHelp to a common area. You
would need to generate WebHelp 30 different times to 30 different
folders. Then publish each output folder to a corresponding server
folder. Then restrict each user to only seeing their assigned
folder.
Hopefully that helps... Rick

Multiple Database Servers Question

Hi,
Please forgive this ignorant question, but can someone tell
me how one would go about using multiple database servers?
Just as there comes a time where one would need more than
one web server and would need to use a load balancing
solution, what happens when one would need more than one
Database Server?
How does one go about implementing that solution?
Is there some way to have two database servers carrying the
same information with some kind of load balancing solution
in front of it(?) or does one place some tables on one
Database
server, and other tables on the other database server?
(I have no clue as to how things would work.)
Thanks in advance,
Joe

Microsoft SQL allows for clustering of SQL databases, so for
instance two servers connected to a fileshare and a virtual address
shared across the two physical boxes. Database connections are made
to the virtual addres which will then be handled by the active
node. Becuase a database is ultimately a file(s) on a disk it can
only be attached to one node at a time so you end up with an
active/inactive cluster.

Multiple-jar applet question

Here's a basic question that none of the examples seem to address. If my applet is comprised of multiple jars (some dynamically loaded based on system configuration), do they all have to be signed, or does just the jar file containing the applet entry point need to be signed?
Conversely, could it be that only the jar files that contain code that wants to write files to the local file system need to be signed, or does everything need to be signed?

Conversely, could it be that only the jar files that contain code that wants to write files to
the local file system need to be signedThe Stack needs to be "trusted" code. If an unsigned applet "not trusted" calls a method
of the signed applet it should not be allowed to do "trusted" things.
One example is when you call a public method of the applet from javascript. There is a
sollution other that signing all.
http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
second post

Multiple AP Managers Question

Hi,
I've got a question concerning the configuration of multiple AP manager interfaces on -for example- a cisco WLC 2504. I've read the configuration guide but I'm not sure whether this is the way the protocol works. Say I want to distribute AP's (and traffic) across various AP Manager interfaces on the WLC. I would configure the following:
Create one management interface (which will automatically also be an AP-Manager interface)
Configure 1 (or more) Seperate ap-manager interfaces, assign them to a port number, and select "Enable dynamic AP Management". VLAN ID's will be the same.
Create a WLAN and configure it's interface to "management"
Is it correct if I state that the LWAPP protocol takes care of the discovery from the Access Point and sends information about the available AP-manager interfaces back to the AP and the AP knows which ap-manager interfaces are available, connecting to the least loaded one?
Thanks in advance for your time.

The AP manager communicates with the AP's using CAPWAP. The use for multiple AP managers to me doesn't make sense to do especially since its a 2504. I have always just used the management interface for AP management and assign a primary and backup port. You can do it the way you have stated, but what is the benefit. I have seen 5508's deployed using only one gigabit port and over 250 AP's and they had no problem.
Thanks,
Scott Fella
Sent from my iPhone

Multiple Image Uploading Question

Please forgive my ignorance here but I saw the question on multiple image uploading and this is something i have been trying to do for a few days now without any success.
I am using CS3 with ADDT and PHP
I want to allow my users to be able to upload say 5 pictures at a time, each user has multiple photo albums the names of which are stored in mysql table, the image name is stored in a different table with a reference to the album id.
So, I assume that i put an insert record on the page, I followed the usual process used to have a single image upload and thought it would give me or add the extra file field options on the form when telling the multi upload to allow 5 images to be uploaded, not the case. Do i have to create a form on the page first with 5 file fields or am i just missing the plot here.
Sorry if this is just something that seems simple but i just don't seem to be able to get it to work at all. I have no working example to look over and have serach google to see if there are any tutorials for doing this but can't find any at all.
Thank you in advance of any help and guidance given
Regards
Ray

Hi Günter
Thank you for your reply and also for the great tutorial site you run which has helped me quite a lot with several things.
ok, so i am maybe a little confused here, so what is the multiple image uploader for if not for uploading multiple images, and how does it give you the option to select more than one file or is it that you can't use it when inserting the image file into a database?
Please forgive my ignornace again, i can see when i have tried using the multiple image upload thatit puts a text link called upload, what is that for because it doesn't seem to do anything on the page i have tried it on?
Kind Regards
Ray

Hooking up multiple I-pods to Itunes

We have 2 ipods but need to use one computer to hook up to but not all at once. Is there a way to use one I-tunes and have 2 seperate accounts on it. Everytime I hook my I-pod up it want to put my wifes songs on it. Any help would be appreciated.

The following is form kbase article 300432. The article has links to walkthroughs on setting up your own playlists and configuring your ipod options accordingly. You can find this article here:
http://docs.info.apple.com/article.html?artnum=300432
How to use multiple iPods with one computer
Method One
If you share your computer with other people, the simplest way is to maintain separate user accounts on the computer for each person and his or her iPod. This is useful if everyone has different musical tastes; each person gets to maintain his or her own personalized iTunes music library, and can customize the iPod with his or her music.
Mac OS X users:
See "Mac OS X: How to Share a Computer with Other Users" to learn how to set up additional user accounts.
Windows users:
Look in your computer's Help documentation to learn how to set up additional user accounts. To locate this information, do the following:
Click the Start Menu, and then point to Help or Help and Support.
Enter new user in the Search field.
Press Return.
If you create multiple user accounts on one computer but want the same music to be available in iTunes for all users, see "iTunes: How to share music between different accounts on a single computer."
Method Two
If one person wants to use multiple iPods on a computer, or you don't want to create multiple user accounts to support multiple iPods, you can set iTunes to update each iPod with only certain playlists. This way, you can put all your music on, say, your iPod photo and keep just your workout music on your iPod mini. Here's how to do this:
First, create a new iTunes playlist for each iPod that contains all the music that you want to send to that particular iPod.
Then configure the iPod Options in iTunes so that each iPod gets updated with only your selected playlists.

Using iTunes/Ipod mini on multiple computers (many questions)

Hello I recently purchased another computer for myself. I would like to use iTunes and my ipod mini on this computer but I would also like to continue to use it on my family's main pc. Is this possible? Do I have to worry about that deauthorization of computers, or the license, or is it fine to use on two pcs? I just don't know how all that stuff works but I think I remember something about having iTunes on one pc only.
Now for the second part of my questions. How do I actually go about transfering iTunes and my ipod to another pc? Do I just install iTunes like normal and transfer my files using an external hard drive? My family pc will remain as the main one for now but eventually I'll switch it to my laptop. I don't care about playlists and song ratings because I don't bother with that. What I want to do is simply have the music that's on my family pc put onto my laptop. I have bought an external hard drive so I could transfer the music without much problems.
Finally can I switch between my laptop and home pc? I mean can I use my mini from my laptop and then later update it from my home pc and do other things like that. I'll use the songlist from my home pc for now but eventually my laptop will become my main one. I know I read something about clicking no if I want to change the music library when plugging in my ipod to another pc. Do I have to keep both iTunes updated to the same version and the songlist the same? I'm wondering if there will be any conflicts between the two.
I'm sorry about how confusing this all is and the many questions I have but I hope somebody can help out. Thank you.
Ipod mini (not 1st generation) Windows XP

hi Gerhard!
you can authorise up to five PCs at one time:
iTunes: About Music Store authorization and deauthorization
this Buegie post is an excellent resource on moving your itunes to a different computer:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=2231034
and these resources should be helpful with managing the mini from different computers:
Using iPod with multiple computers
Transferring songs to iPod using iTunes
Copying music between authorized computers with iTunes for Windows
love, b

Adobe Captivate - Multiple Choice Quiz Question - Radio Button and Text Alignment

I have created a quiz with multiple choice questions.
No matter what I do I cannot align the radio button and the text for the choices (see below).
I would like to align the center of the radio button with the center of the letter A) and B).
I have tried every option that I can think of in the Properties options.
Please let me know if anyone has a solution for this.
Thank you

Thanks for the reply.
Previously I tried several different combinations of fonts and font sizes, but didn't see any change.
Does anyone else know of anything else that could effect this situation?

Multiple i pod question

Similar Messages

Maybe you are looking for