Multiple idoc to flat file

Hi,
i have a scenario from idoc to flat file.There is two idoc that send message in same file.Without flat file content messages come succesfully.the format should be following:
at the first row should be the first idoc,
at the second row should be the second idoc
01 1FONEX0045               FONEX0045               FONEX SIVI SABUN 400+850ML FLOWERS                    =>1.idoc
02 1FONEX0045               8691988000162           8691988000162                                                             =>2.idoc
01 1DOVE0199                DOVE0199                   DOVE SAC DOKULMELERINE COZUM SAC BAKIM M     =>1.idoc
02 1DOVE0199                8718114638348           8718114638348                                                               =>2.idoc
Thanks in Advance
Nurhan

Hi,
You have to MessageTransformBean Module.
The MessageTransformBean module enables conversion of XML files to flat files and vice versa. You can use this module in the sender and receiver communication channels.
In receiver communication channel, specify MessageTransformBean module before standard adapter module CallSapAdapter and use
Module Name: localejbs/AF_Modules/MessageTransformBean
Module Key : XML2Plain
Please see the below links, it might be useful to you.
/people/gabrielsagayaselvam.panneerselvam/blog/2009/12/07/standard-adapter-framework-modules-afmodules-in-pi-71-150part-2
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/frameset.htm
Regards,
P.Rajesh

Similar Messages

Multiple IDocs - XI - Flat file

We are looking at a scenario to send multiple IDOCS from SAP to Flat File. We implemented this using the Collect Pattern in BPM, merge all the IDocs into a single message and write it in a file. But is there any a way to avoid BPM and still be able to send multiple IDOCS in a package to be written onto one file?
Thanks
Vinoda

Hi,
I think this is possible using PACKAGING.
Check this note 814393 on Service Market Place.
You want to create or process an XI message with multiple instances of an IDoc (of the same IDoc or extension type) in the mapping.
The payload of the relevant message is to have the following the format:
<IDOCTYP>
<IDOC>...</IDOC>
<IDOC>...</IDOC>
</IDOCTYP>
To be able to process these messages in the message mapping of the source system and to create them in the target system, you need an XML schema for the IDOC that allows multiple instances of the IDOCtag.
If the relevant IDOC is imported into the Integration Repository, the system generates an XML schema that sets the number of instances of the IDOC tag to exactly one.
The following describes how you can manually change the XML schema so that multiple instances of the IDOC tag are allowed, and how you can make the modified XML schema available to an adequate message mapping.
Other terms
IDoc packaging
Reason and Prerequisites
The relevant IDoc is imported into the Integration Repository.
Solution
1) Log on to the Integration Repository.
2) Open the relevant IDoc in the object editor.
3) Select the "Export XSD" menu option in the "Tools" menu.
4) In the subsequent dialog box, assign a file name and save the data to the hard disk of your local PC.
5) Open the file that you have saved in step 4 in an adequate editor (for example, Notepad) for editing.
6) Locate the first entry: <xsd:element name="IDOC" type="<
Idocname>"> and add the following expression, maxOccurs="unbounded", between the value of the type attribute and the closing angular bracket.
Example:
<xsd:element name="IDOC" type="ADR2MAS.ADR2MAS02"
maxOccurs="unbounded">
7) Save the modified file to the hard disk of your local PC.
8) In the message mapping, use the file saved in step 7 instead of the imported IDoc by using the "Import XML or XSD" function in the mapping tool to select the source or target messages.

Regards,
Bhavesh

Conversion of multiple xml idocs to flat file

Hi,
I did ABAP mapping to convert xml idoc to flat file by using the reference how to do abap mapping in xi3.0.pdf
It is working for only one idoc at a time.
If I have multiple idocs in a single xml file, the above code is not working.
Please let me know what cchange to be done to work out for this.
Hope am clear.
Regards,
Anil.

Look For the Occurances of target Field node...It should be 1 to unbounded

IDOC to flat file and vice versa

Dear community,
we should send IDOCs to flat files and read plain files and map them to IDOCs.
Is there any comfortable way to do this without doing a huge content conversion for
IDOCs? Exist a SAP standard for such process?
We receive the IDOC as normal IDOC. Would it be more easy to save the IDOCs
directly as flat file on ERP file system??
System PI 7.11
IDOCS: WHSCON, WHSORD and WMMBXY
Regards
Chris
Edited by: Christian Riekenberg on Feb 1, 2012 2:41 PM

Hey folks!
We have a PI 7.31 SPS5 Java-only installation here and are using the module IDOCFlatToXmlConvertor. For single IDocs with one line for the EDC_DC40 header and the others for the IDoc payload the conversion works. But when we want to process multiple IDocs from the same type within one file, we see this error in the log:
Module Exception 'com.sap.aii.af.idoc.exception.IDOCModuleException: No data segments for DOCNUM = ' found, cause: <null>
Are there any requirements how the multiple IDocs have to be structured within the file?
Best regards
Heinrich
Update:
I found out that the module wants each record to contain the corresponding DOCNUM to find the matching records. The non-SAP sender system normally does not set this value. Is there a way to "convince" the module to convert the IDocs nevertheless?

Packaging IDOCs - SAP R3(IDOCs) - XI - Flat File

Hi,
I've got the scenario SAP R3(IDOCs) -> XI -> Flat File.
The IDOCs are sent from R3 with the Option Send by Packet. There is 10 Idocs per packet.
What I want to do is create one flat file for each packet.
So one packet of 10 Idocs must create 1 flat file.
Is it possible to do that whithout BPM ?
Regards,
Vincent

Hi,
Refer to this weblog which gives step by step process for IDoc to file scenario.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Use BPM to collect tyhe Idoc, standard pattern is available for the same.
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
This following weblog explains the collection of Idoc.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
This also explains the IDoc package.
/people/sravya.talanki2/blog/2005/12/09/xiidoc-message-packages
Thanks,
Prateek

IDoc to Flat File in SAP PI 7.11

Hi Experts,
I am working on PI 7.11 and I have scenario from Idoc to Flat File.
Idoc is posted from source side R/3 system.My requirement is "With out Converting the Idoc structure to XML Structure i want to send the data to Target system i.e. File system.
But the structure of the target structure is different from source structure.
My questions are:
1). Is it Possible to send the data to Target system without converting Idoc structure in to xml format through our PI 7.11 ?
2). If possible please provide me the way that executes in the Interface is?
Could you please provide the Inputs.
Best regards,
satya.T
Edited by: satyatanuku on May 24, 2010 3:26 PM
<Moved from Trial, Preview~ forum>
Edited by: Prateek Raj Srivastava on May 25, 2010 1:02 PM

Hello Folks ,
I am also facing the same scenario please provide me any options to achieve this scenario .
I am searched in Forums of SDN but no inputs or blogs available.
Let me know i am having one solution is it right or wrong ?
we have to achieve this IDOC Tunneling .... is it right friends ?
Still inputs required....
Regards,
Ravi.

Doubts in SAP(Idoc)-XI-Flat file scenario

Dear All,
I am sending Delivery Idoc from R/3 and I am able to view the Idoc in XI in transaction IDX5. Also i m able to see the XML structure with the data of the idoc in SXMB_MONI.
Now as per my scenario I have to download this to a flat file from XI.
My question is, should I have to do the creation of Data types, message types, mapping interface & interface mapping in IR or should I directly do the designing in the ID.
waiting for your reply.
Warm regards,
N.Jain

Hi,
DT, MT, MI : you will create these things for receiver flat file only.
First create
In Integration Repository :
1.     Import structure of IDOC in your scenario, In imported objects  IDOCs
              a.     In Interface Objects
1.     Create Data type for your flat file
2.     Create Message Type
3.     Create Message Interface (inbound Asy.)
              b.     In Mapping Objects
1.     Message Mapping : IDOC to Message Type of Flat File.
2.     Create Interface Mapping : IDOC to Flat file by using Message Mapping which you have created.
Make activate all these things.
In Integration Directory :
1.     Create Communication channel for File Receiver.
2.     Sender Communication channel is not required.
3.     Create Receiver Agreement.
4.     Sender Agreement is not required.
5.     Interface Determination
6.     Receiver Determination
At sender side you will take your IDoc and at receiver side you will take your flat file.
It can help you,
Regards,
Sandeep Kaushik

R/3 46C(IDOC) -- XI -- Flat file scenario

Hi
Is there anyone who could give me information on a R/3 46C(IDOC) --> XI --> Flat file scenario?
Many thanks!
br
Göran

Hi Manish
We are using a standard IDOC called PROACT.PROACT01
(We are using transaction sa38(Report RSMIPROACT) in R/3 to send our IDOC.)
First we create the technical and business systems in SLD
Second we transfer these to the repository.(I think the only thing you need to do is to update the SLD cache to get them there - Design : Integration builder --> Environment --> clear SLD cache)
Then we just use the configuration wizard(Configuration : Integration builder --> Tools --> configuration wizard) to map everything together - defining sender and receiver etc(You get the configuration wizard tool by patching XI to patch level 4 or 5).
I assume that you have made all the configurations accordingly to the XI configuration guide which you can download from the service marketplace.
This is just a hint but maybe it can give you a start.
br
Göran

IDOC to flat File----Problem in File Content Conversion at receiver

hi experts,
I am doing a IDOC to flat file secnario.
My requirment is IDOCXI-Flat file
Format of flat file is like:--
Every segment in the IDOC will be converted into a single line of file(without any delimiter). So number of lines in flat file will be equal to number of segments in IDOC.
I am facing problem in File Content conversion.
Please help me out..
Thanks
Jaideep

Check this doc...
[How To...Convert an IDoc-XML structure to a flat file and vice versa in XI 3.0 |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a]

Idoc to flat file using Integration process does not show up at all

Hello All,
I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
However when I send the IDOC from SAP then the Integration Process scenario just does not work.
I Checked SXMB_MONI There is no entry for the Integration Process.I can see entry for other without Integration Process.
SXI_CACHE : I can see my Integration Process active
SWEQADM : I have activated the Event Queue and Background job
SWF_XI_ADM_BPE : ALL BPE is showing green status.
All syntax check on IP are fine.
There is no Basis Help for me so there could be some additional basis steps which need to be configured. Has anyone faced such an issue with Integration Process?
Regards
Prashanta

Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
1. let us split the scenario into two.
a. Sender to BPM ( Integration Process).
b. BPM to Receiver.
2. First let us configure the first Sender to BPM.
a. Sender Agreement( Not required ).
b. Receiver Agreement( NOT Required).
c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(Integration Process).
d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
3. Now let us configure the Second BPM to Receiver.
a. Sender Agreement( NOT Required)
b. Receiver Agreement( Sender Service(Integration process), Receiver Abstarct Interface,Receiver service, Inbound Interface).
c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
d. Interface Determination( Inbound Interface, Message Mapping(NOT Required)).
So Finally we have One Receiver Agreement, Two Receiver Determinations, Two Interface Determinations.
Please let me know if you have any more queries.
Regards
Gopi

IDoc to Flat file scenario - abap mapping

Hi All,
I have to do some IDOC to Flat file scenarios. In Order to generate the file in required format I will have to add all segments(Nodes) of Idoc in FCC receiver. We also have other option of doing it through ABAP Mapping which I found in one blog.
Now my question is : Is it better way of doing it through FCC or ABAP Mapping?
Ofcourse from development point of view ABAP Mapping looks easier as FCC is very time consuming task.
Is there and performance issues in either of the approach?
Thanks and Regards,
Atul

Hi VJ and Harald,
Thanks for your replies.
I am not having PI7.1 however the given blog was very informative.
I will try using file port approach as suggested.
Thanks and Regards,
Atul

Idoc to flat file mapping using XSLT

Hi,
i am using XSLT mapping. my requirement is mapping between idoc and flat file(xml to text). as i do not want to use FCC, i have opted for xslt mapping. please let me know any article which would be helpful for this.
regards,
Meenakshi

Hi Meenakshi,
Two things:
1. Achieving this functionality using XSLT is very difficult.
2. Secondly you may not be able to find a direct document to convert IDoc-XML to flat file using XSLT in sdn. Try google.
I found one link like that may be you can get some idea from there
http://www.stylusstudio.com/SSDN/default.asp?action=9&read=6453&fid=48
Also if you have a XSLT editor like XMLSPY or stylus studio then creating your specific XSLT will b much more simpler
Regards
Suraj

IDOC to flat file without XML conversion

Hi,
I want to implement a scenario like this:
IDOC --> XI --> flat file
The flat file has to have the IDOC structure as you have when you write an IDOC to the R/3 file port. But we want to have this process running through XI.
When you use the IDOC Adapter the IDOC is converted to XML first, which is time consuming. So this I want to skip this step.
So is it possible to receive the IDOC directly in XI without converting it to XML? How should this process be designed.
Ron

Ron
Looks like you need IDOC tunneling. It is possible by making a configuration parameter.
You can find more information in http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
While you try it, I will try to simulate this requirement in our system and let you know the result.
KK

PO Idoc in Flat File format

Hi all,
I am able to generate the PO Idoc in Flat file format using standrad FM IDOC_OUTPUT_ORDERS. but the Flat file appearing is not in a appropriate format.
I'm looking to generate the Flat file in such a way that there will be only one line for each Idoc Segment.( with Line termination).
How to Achieve this.
Regards,
S Anand

Resolved.
we can use CG3Y transaction.
Regards,
S Anand

Multiple idocs in a file

Hi,
How to transfer multiple idocs in a file? ( We can use BPM) but i dont know how to implement using BPM.
Kindly help.
Regards
sai

Do you wish to have multiple idocs coming through SAP merged into a single file
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/906fda31-0e00-2c10-4fb4-e264988a9263
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b?quicklink=index&overridelayout=true
saptechnical website /Tutorials/XI/CollectMultipleIDocs/Collect1
Regards
Ninad

Multiple idoc to flat file

Similar Messages

Maybe you are looking for