Multiple Images Import template?

Hi folks,
First of all, I cannot find the link to product import templates anywhere after an hour's search. That is just wrong!
Secondly, as I remember seeing one, it doesn't offer multiple views of a single product. But i've seen stores with multiple product views.
Can someone direct me to the proper database templates and import files for adding multiple images to a product?
TIA

Hi Liam,  So are the poplets connected to the product database and is there a way to bulk upload them with the csv file?  Or does this have to be done individually by hand? If there isn't a place for the additional items in the csv file, then it seems they aren't directly linked in the product database?
I think I found the template before when I was doing research for the BC product in the product information area and not in the actual product import area. I couldn't see the download template until after I pressed product import. That was very deep in the system, with multiple clicks to get there.

Similar Messages

  • How to add metadata to multiple images via Template

    Hi
    Wonder if anyone can tell me if it is possible to add Metadata to multiple images using a metadata template.  I see that I can add to multiple using Organizer but with that you have to type in the metadata.  In Elements 11 I can do it using a template but only for 1 image at a time.
    Is there a way to do this in Elements 11 or Organizer?
    Thanks in Advance.

    In the File properties dialog of the editor you can enter your values in the metadata tabs, then use the 'Import' button on the bottom of the dialog, switch to 'Export' and that exports your values as a template.
    As far as I know, this is to be used in the advanced dialog of the downloader : you can use your templates at import time for a batch of images.
    Otherwise, when you have selected many images in the organizer, you can click on the 'Add IPTC data' button in the tags panel on the right side : you have to enter the data which will be applied to all the selected files.

  • Exporting a template with multiple images

    Let's assume I want to have a large print made at an outside commecial lab because my printer does not handle the size.
    In the Print Module, is there a way to export a template with multiple images so that it can be sent to an outside lab for printing?
    Or, is this not possible and I would have to design the template in Photoshop and send the file to the lab?
    If Lightroom is not yet capable of this, it certainly seems like a worthwhile feature.

    Thanks for sticking with this thread to help me.
    I am on Windows and I do have PDF capability, the full Adobe Acrobat Professional.
    I have been experimenting with your suggestions and, yes, saving it as a PDF and bringing it into Photoshop is a workaround. The images and Identity plate come into Photoshop as they appear in the template in Lightroom.
    What doesn't appear in Photoshop is the whitespace(margins)around the images. They appear in the PDF, but they don't appear when I open the PDF in Photoshop. Is there a setting I'm overlooking in the PDF settings dialog that will correct this? Or, is this just the way importing a PDF works when it comes to margins? Must I always go to Image/Canvas size to get the canvas I want? Is there a way of not having to do this?

  • How to import multiple images at the same time in illustrator?

    How to import multiple images in a document at the same time in illustrator?
    It's possible?

    Script: Place Multiple Files in Illustrator (Kelso)
    http://kelsocartography.com/blog/?p=2047

  • Creating a simple Template for multiple images

    Hello,
    I work for an online company, and we deal with displaying multiple images on our site.  I've been just cropping sets and just droping them in a file and organizing them that way, but I was wondering if there is a faster way of doing this in Photoshop with Templates maybe? but it needs to be easier and faster than the process I'm using now. Any help would be greatly appreciated.

    When I read what you have written "we deal with displaying multiple images on our site.  I've been just cropping sets and just droping them in a file and organizing them that way, but I was wondering if there is a faster way of doing this in Photoshop with Templates maybe?" I don't comprehend what your doing now.   Photoshop is not a file editor however it can create files that have more then one image. Perhaps you could describe what you want to do.  What is a set, what is in the set, how many images in a set is that number always the same how do you want to crop do you have some layout in mind some size requirement?

  • Importing multiple images as inline objects

    I know Indesign allows for multiple images to be placed in a grid, but is there a way to import several images straight into a story as inline frames?

    After digging around in the scripting section of this forum, I managed to find a snippet of a script which replaces image names in the text with the actual image. Very useful stuff.  
    // reset the Find/Change dialog app.findGrepPreferences = app.changeGrepPreferences = null; // formulate a grep search string app.findGrepPreferences.findWhat = '@.+?@'; // find all occurrence of image names between @, last one first f = app.activeDocument.findGrep (true); for (i = 0; i < f.length; i++) { // construct file name name = f[i].contents.replace (/@/g, ''); // place the pdf and REPLACE the destination with the folder of links f[i].insertionPoints[0].place ('Insert image folder here' + name)); } // delete all @??@ codes app.activeDocument.changeGrep()

  • InDesign CS3 Scripting XML Import Multiple Images into same Text Frame

    I am having trouble importing multiple images into the same Text Frame using XML import. I imported 5 images into the text frame. However, all 5 images are laying on top of one another. Does anyone know if there is a way to have all images laying out like how Microsoft Word handles inline images, i.e., laying out next image to the right of previsous image in the same line and if there is not enough space left in the line, then wrap to next line. Thanks in advance. I understand I could use JavaScript to do post import processing, e.g, calculate the image size and place each images accordingly. But I am trying to see whether there is a way to do this without scripts.

    You can apply an object style to all anchored images by script. A text frame containing main flow should be selected.
    var doc = app.activeDocument;
    var textFrame =  app.selection[0];
    var rectangles = textFrame.texts[0].rectangles;
    if (rectangles.length > 0) {
         for (var i=0; i < rectangles.length; i++) {
              rectangles[i].appliedObjectStyle = doc.objectStyles.item("Cover");
    However, there is a better approach:
    Step 1
    Create place holders for a single "Book" element and format it as needed -- apply an object style to the cover.
    Step 2
    Import the xml file -- the placeholders are replaced with data from the 1st xml element
    Step 3
    Drag & drop the element containing all "Books" elements into the main flow -- all elements are placed and formatted the same way as in step 1.
    Finally, add a new page, click the overset text icon and autoflow text to add pages so that to fit all the text.
    Hope this helps.
    Kasyan

  • I am trying to import photo's on i photo.  It downloads all of the pictures on my camera, how do i only select the photos i want?  Is there a way to do this without selecting one photo at a time? is there a way to select multiple images?  thanks!

    I am trying to import photo's on i photo.  It downloads all of the pictures on my camera, how do i only select the photos i want?  Is there a way to do this without selecting one photo at a time? is there a way to select multiple images?  thanks!

    To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
    To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
    Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
    OT

  • Multiple images in pscs5 when importing from bridge

    Hi Guys
    Hope someone can throw some light on my problem?
    When I bring an image from bridge into photoshop CS5 the image sometimes (more than I would like) breaks up into multiple images in the same window. (see attached example). It was suggested that my video driver may need updating but on checking I have the latest drivers!
    This problem has only been happening for about a month and  everthing was working fine before that. Im running win7pro 64 bit and am running photoshop from my ssd drive. The display driver is a Nvidia Geforce 240 which again has been fine previously. Would it be worth unistalling/reinstalling the program, just a thought!
    Any help from you guys would be more than welcome.
    Thanks trev

    Chris and Noel
    Thank you both for your advice. Chris I tried the update driver from Nvidias web site and it also said that my driver was uptodate 'do you want install anyway' which i did! It made a slight difference but still the problem showed up, so I disabled the Open gl drawing box in preferences menu and then reset it changing the advanced setting to normal in the advanced menu. This seemed (not holding my breath) to have done the trick! and Noel I saw the option for what you have said but I didnt have the confidence to go manual, that'll be my plan B.
    Thanks again guys, I'll be back for more advice
    Trev

  • How do I import multiple images (from Aperture) to multiple pages in Pages?

    I can select and drag multiple images from Aperture to Pages, but they all are inserted on the same page. If I have 100 images, can I force Pages to insert one image on each of 100 pages?
    Thanks,
    Rick

    Burn for what purpose? To share with others?
    Export the photos to a folder on the Desktop. Burn that with the Finder. Result: a folder of images that any computer can read.
    Using iPhoto's Burn command creates an iPhoto Library on the disk and is suitable only for others also using the same version of iPhoto.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.
    Note that rewriteable disks do not necessarily mean that you can append files to them, and require special burning software to do so.
    Regards
    TD

  • Bridge CS4 won't output to pdf multiple images with same filename

    Hiya...my googling efforts have thus far failed!
    I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3.  Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
    The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place).  So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice.  And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
    I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway?  It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
    The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc).  But I've tried using the standard bridge templates and it does the same thing.
    http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
    Any help would be appreciated...even if to tell me that I am being unreasonable!
    UPDATE 16/11/09
    Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
    Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
    Message was edited by: djtun71 (16/11/09)

    When I click import from disc I am asked to choose a disc and then I get this message:
    The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
    This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
    Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

  • Multiple Images Questions

    Hi,
    I am a total beginner with Flash however I have bought a
    template for my website and wish to make some additions to it.
    Basically when the template loads up it always has a main
    image present and the page options down one side. What I would like
    to do is have multiple images set for the opening image so that
    everytime you enter the site you will view a different main image.
    I'm sorry if I haven't explained this correctly. If you
    follow this link www.gsa.ac.uk and hit refresh a few times you
    should get what I mean.
    Is there some sort of online guide I can follow to do this ?
    Thanks
    Euan

    Aperture excels at converting your digital negatives from RAW, organizing them in any way you want, and developing each Image to be as good as you can make it.  It is not, however, a graphics program -- the difference being, primarily, that graphics programs are built from the ground up to perform compositing.  Photoshop, and the like, are excellent at compositing.  Aperture is not.
    The answers to your questions:
      1.  No.
      2.  This is actually a more complex question than it seems.  With Aperture you can Lift adjustments from any Image and Stamp them onto any other Images.  For panoramas, however, what you want is not "the same exposure _adjustment_", but rather the same final exposure.  There is no way to do this, afaik, in Aperture.  Good panorama stitching programs will make adjustments for you to even out the shot-to-shot variation in exposure.  You should not use any automatic exposure modes when capturing the pictures you intend to stitch together.
      3.  Let the panorama program do it for you.  I make RAW captures, convert and stack in Aperture, export as TIFFs, create the panorama (I've used Hugin  -- open source and free -- and found it excellent for my modest needs), import it into Aperture and set it as the Stack Pick.  I use Aperture to make adjustments to the imported panoramic Image.
    Message was edited by: Kirby Krieger -- link added.

  • How do I stop iWeb outputting multiple image files? It makes my site slow!

    I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
    I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
    I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
    To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
    As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
    This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
    Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
    Perhaps there is a setting somewhere I've missed. If so, let me know someone!
    It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
    Clean it up and sort it out Mr Jobs!
    PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?

    Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
    If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
    Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
    Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
    Download iWebBackup Here
    You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
    http://iWebFAQ.com

  • Problem in Loading Multiple image in Single Sprite/MovieClip

    Hi All,
    I am having a killing problem in loading multiple images in single movie clip/sprite using a separate class.
    Here is the ImageLoader.as class
    package com.project.utils{
        import com.project.*;
        import com.project.utils.*;
        import flash.events.EventDispatcher;
        import flash.display.MovieClip;
        import flash.events.Event;
        import flash.events.ProgressEvent;
        import flash.display.Loader;
        import flash.events.IOErrorEvent;
        import flash.net.URLLoader;
        import flash.events.MouseEvent;
        import flash.net.URLRequest;
        import flash.display.Bitmap;
        public class ImageLoader extends EventDispatcher {
            public var imgloader:Loader;
            public var imgMc:MovieClip;
            public var imgObject:Object;
            public var loaded:Number;
            public function ImageLoader():void {
                imgMc = new MovieClip();
                imgObject = new Object();
                imgloader = new Loader();
            public function loadImage(imgHolder:MovieClip, imgObj:Object):void {
                imgMc = new MovieClip();
                imgObject = new Object();
                imgloader = new Loader();
                imgMc = imgHolder;
                imgObject = imgObj;
                imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
                imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadProgress);
                imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadFailed);
                imgloader.load(new URLRequest(imgObj.FilePath));
            private function onImgLoad(Evt:Event):void {
                var image:Bitmap = Bitmap(Evt.target.content);
                try {
                    imgMc.removeChildAt(0);
                } catch (error:Error) {
                imgMc.addChild(image);
                try {
                    if (imgObject.URL != undefined) {
                        imgMc.buttonMode = true;
                        imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
                        imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
                } catch (err:Error) {
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
            private function onImageClicked(evt:MouseEvent):void {
                trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
            private function onImgLoadProgress(Evt:ProgressEvent):void {
                if (Evt.bytesLoaded>0) {
                    loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
                    dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
            private function onImageLoadFailed(Evt:IOErrorEvent):void {
                trace("Image Loading Failed");
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
    Here I am loading some images using the above class in a for loop, like
                for (var i=0; i < 3; i++) {
                    //imgLoader=new ImageLoader;
                    imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
                    var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
                    target.list_mc.visible=false;
                    var imgObj:Object=new Object;
                    imgObj.FilePath=list[i].Thumbnail;
                    imgObj.Url=list[i].Url;
                    imgObj.Target=list[i].Target;
                    target.list_mc.urlObj=new Object  ;
                    target.list_mc.urlObj=imgObj;
                    imgLoader.loadImage(target.list_mc.imgholder_mc,imgObj);
                    target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
                    target.list_mc.imgholder_mc.buttonMode=true;
                    target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
                    mcCount++;
    In this case, the ImageLoader.as works only on the last movie clip from the for loop. For example, if i am trying to load three image in three movie clips namely img_mc1,img_mc2 and img_mc3 using the for loop and ImageLoader.as, I am getting the image loaded in the third movie clip only img_mc.
    See at the same time, If i uncomment onething in the for loop that is
    //imgLoader=new ImageLoader;         
    its working like a charm. But I know creating class objects in a for loop is not a good idea and also its causes some other problems in my application.
    So, help to get rid out of this problem.
    Thanks
    -Varun

    package com.project.utils{
        import com.project.*;
        import com.project.utils.*;
        import flash.events.EventDispatcher;
        import flash.display.MovieClip;
        import flash.events.Event;
        import flash.events.ProgressEvent;
        import flash.display.Loader;
        import flash.events.IOErrorEvent;
        import flash.net.URLLoader;
        import flash.events.MouseEvent;
        import flash.net.URLRequest;
        import flash.display.Bitmap;
        public class ImageLoader extends EventDispatcher {
            public var imgloader:Loader;
            public var imgMc:MovieClip;
            public var imgObject:Object;
            public var loaded:Number;
            public function ImageLoader():void {
    // better add you movieclip to the stage if you want to view anything added to it.
                imgMc = new MovieClip();
                imgObject = new Object();
                imgloader = new Loader();
            public function loadImage(filepath:String):void {
                imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
                imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadPr ogress);
                imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadF ailed);
                imgloader.load(new URLRequest(filepath));
            private function onImgLoad(Evt:Event):void {
                var image:Bitmap = Bitmap(Evt.target.content);
                try {
                    imgMc.removeChildAt(0);
                } catch (error:Error) {
                imgMc.addChild(image);
                try {
                    if (imgObject.URL != undefined) {
                        imgMc.buttonMode = true;
                        imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
                        imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
                } catch (err:Error) {
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
            private function onImageClicked(evt:MouseEvent):void {
                trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
            private function onImgLoadProgress(Evt:ProgressEvent):void {
                if (Evt.bytesLoaded>0) {
                    loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
                    dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
            private function onImageLoadFailed(Evt:IOErrorEvent):void {
                trace("Image Loading Failed");
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
    Here I am loading some images using the above class in a for loop, like
                for (var i=0; i < 3; i++) {
                    var imgLoader:ImageLoader=new ImageLoader();
                    imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
                    var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
                    target.list_mc.visible=false;
                    var imgObj:Object=new Object;
                    imgObj.FilePath=list[i].Thumbnail;
                    imgObj.Url=list[i].Url;
                    imgObj.Target=list[i].Target;
                    target.list_mc.urlObj=new Object  ;
                    target.list_mc.urlObj=imgObj;
                    imgLoader.loadImage(pass the image file's path/name);
                    target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
                    target.list_mc.imgholder_mc.buttonMode=true;
                    target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
                    mcCount++;

  • How  to fade groups of images or multiple images at the same time?

    I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how  to fade these groups and multiple images at the same time.
    Thanks!

    Use TweenMax for this.
    the syntax is like this:
    var arrayOfDisplayObjects:Array = new Array();
    //with arrayOfDisplayObjects.push(DisplayObject)
    //you can put any DisplayObject in the Array and when you want to fade them call this
    TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
    //to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

Maybe you are looking for