Multiple images per page

We use Qimage to produce, for example 2 7"x5" images on an A4 page. This doesn't seem to be possible in Aperture or have I missed something ???

I had asked a similar question a few days back, and here's a link to that thread. There may be some short term workarounds, but there are quite a few folks who really want to see a "Qimage" type function added to the print module in Aperture (and Lightroom for that matter!).
Here's the link:
http://discussions.apple.com/thread.jspa?threadID=663413&tstart=0
-Tom
Powermac Quad Mac OS X (10.4.7)

Similar Messages

Multiple images per page printing

I am trying to print 2 images per page..I've selected "multiple" and "pages per sheet:2"

I have a screenshot

Create a PDF with multiple images per page

So this seems really simple, but i cannot figure it out... i am creating a PDF from 30 JPGs and rather than having an image on each page in the PDF I would like to set it up so that there are 6 images per page... any thoughts .. thanks in advance
cheers
matt

Once you have the PDF with a single image per page, print it out to a new PDF with 6 pages per page.
Either that, or use an authoring application like Word or InDesign.

Printing same photo multiple images per page

Using the new version how do you print the same picture 4x on one page?

Do the following:
1 - duplicate the photo so you have the number of photos that you want on a single page.
2 - select all of the duplicates and start the Print process.
3 - select the paper size.
4 - select the Custom layout
5 - select the aspect ratio ratio you want to have or a custom aspect ratio.
6 - adjust the width and height until you get the number of images per page that you want.
OT

Printing multiple images per page

I'm sorry for this potentially stupid question, but how do I print multiple 4x6 images per 8.5x11 sheets - or in general, mulitple - defined size prints per page of whatever dimension. I have Aperture 1.1, iMac dual core, Epson 2200... I'll be back with many more stupid questions... bear with me!! T

Actually that's not a dumb question at all. Right now there's no way to say directly what size images you want on a page - you can only specify number of images on a page, and border sizes.
So what you do is figure out how many 4x6s can fit on your paper (2 on an 8.5x11.5 sheet of paper) and then figure out what border you need to get your images to be about the right size. In the case of 8.5x11.5, it's a border of about 0.75 in (perhaps a little more or less depending on the native border your printer has for a sheet of paper).
I think different orientations might screw that system up, so be aware of that and perhaps only print like orientations together.
If you are doing individual borderless prints of any size, do not overlook the handy "calibrate" button which prints out a test target to fine-tune exactly where the edges are in borderless prints!

Trouble printing multiple pages, not multiple images per page

I have just upgraded to PS Elements 10 and am having a challenging time printing multiple pages of the same document (image). These are labels that will be run, so we do 300 of the same image at a time, one per page (label). From the open Elements .psd file I choose print and set the printer settings, and then choose the amount of labels to print. No matter what number I put in for the Print X copies of each page, it still only prints one. When I convert it over to the organizer it seems to work with printing multiple copies. Having to move each file over especially if we are just wanting a quick test run is very time consuming and troublesome. It seems like there should be a simple fix that I am missing in the Elements program.

Hi,
Try following the steps below and check if that may help:
- Open the HP software by clicking the HP ENVY 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
- Click the Network tab.
- Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
- Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
*Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
- Click the HP ENVY 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
- Type the manually configured IP address, click on Save and confirm.
- Open the control panel and go to Devices and Printers.
- Right click the HP ENVY 5530 icon and select Printer Properties.
- Open the Ports tab.
- Click the Add Port button, select Standard TCP/IP and click on New Port.
- Follow the steps by typing the manually configured IP address and confirm the changes.
Now try printing and check if the issue been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can see only one photo per page. How to revert to multiple images per page?

First noticed on my iMac and now on my Macbook (10.4.9)--I'm no longer seeing a month's worth of photos on a single page. Only one photo per page, sometimes with miniature ones in the top border. I thought it was simply an inadvertent click on by part and easily corrected. But all attempts on both computers and reading of Help index haven't led to restoration of an entire page of photos and elimination of the annoyance. I'm wondering now if something I downloaded might have altered iPhoto program itself, making it impossible to view large numbers of photos at the same time. Any suggestions appreciated.
Cap

Cap,
This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
Regards.

"Layout" option in iPhoto 09 - multiple photos per page

I am trying to printing several different photos on a single page. While I can achieve this by selecting a smaller image size and letting iPhoto arrange them automatically I would like to adjust the layout. When I selected "Layout" (under "customize") earlier I was offered layouts for One, Two, Three etc. images per page but now I can't find how to get iPhoto to offer more than One image per page. Am I doing something wrong? With several pictured selected, how do I customize the layout?
Thanks
Duncan

Thanks - That is what I figured but the strange thing is that when I clicked on "Layout" 20 minutes before I posted this question it offered me page layout options for "One", "Two" "Three" and "Four" images per page with different configurations for each......but now I can't get those options - frustrating! And thinking about it, why would it say "One" under layout if there were no other options available?
Has anyone else experienced this? Do other iPhoto 09 users get multiple images per page options under "Layout"?
Thanks
Duncan

Data Merge Multiple Records Per Page Greyed Out

I am using InDesign cs5.5. I am attempting to create a catalog with the data merge option. I am attempting to do a data merge from the Master Page.
As you can see in the image, I have inserted my fields from the data source file. All images, original file, and data source file are in the same folder. I am inserting this info on the left sheet of the master file. When I select "Create Merged Document" the "select multiple records per page" is greyed out, however, there is plenty of room on the page for the 8 records I want it to show. See image below.
After watching tutorials, reading, etc. I made sure that my document does not have facing pages. I deleted my "page 2" to avoid that conflict. I made sure that the placeholder "allows overwrite from the master". I also deleted my "cache"/settings" by doing "ctrl, alt, shift" when reopening the program. I read that it may be because the files need to be on the right hand sheet of the master, however, when I move my info to the right sheet, I get the following message.
I have watched the tutorial videos, read the entire help section regarding data merge, and have correctly created my data source file. I've tried everything I've seen on the forums, apart from uninstalling and reinstalling. Please tell me that someone can help me figure this out as soon as possible. I'm in crunch time!
Thanks a lot.

Thanks Peter. That helped me un-grey the multiple records. I was able to complete a data merge, however, this is what happens.
As you can see in this image, I have the margins setup the way I prefer, and the data merge previews correctly.
Once I click to merge, this is the new document I get - it's only putting one record per page (even though the multiple records per page is selected), and it inserts this layout, not onto actual pages in indesign. It looks reall odd.
And when you scroll down,
Any suggestions on fixing this?
Also, my InDesign freezes up when I try and do a merge of my entire sheet (182 items). The images above are when I tested doing just records 1-32.
Thanks in advance and thanks for being so prompt yesterday. Very helpful.

Is it possible to datamerge more than one image per page?

I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Add image fields in the data source file
By adding image fields to the data source file, you can allow a different image to appear on each merged record. For example, when you merge documents that include information from various companies, you may want to include an image of each company’s logo as part of the merge.
Open the data source file.
At the beginning of the data field name, type an “at” symbol (@) to insert text or paths that refer to image files.The @ symbol is required only in the first line; subsequent lines should include the image paths. Paths, which are case-sensitive, must follow the naming conventions of the operating system in which they’re stored.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.
(Windows) Example of image references in data source file
Bill Tucker
36
C:\Photos\BillTucker.jpg
Dat Nguyen
53
C:\MyDocuments\dat.gif
Maria Ruiz
26
C:\Photos\Ruiz.psd
(Mac OS) Example of image references in data source file
Bill Tucker
36
Mac HD:Photos:BillTucker.jpg
Dat Nguyen
53
Desktop:Family:dat.gif
Maria Ruiz
26
Mac HD:Photos:Ruiz.psd
You can use InDesign to view the path of an image on your operating system. Insert an image in an InDesign document, and then use the Links panel to view the image’s location. With the image selected, choose Copy Info > Copy Full Path from the Links panel menu. You may need to edit the path after you paste it in your data source. This technique is especially useful for images on a server.

anna-rees wrote:
I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Yes, pretty much exactly as you describe. You would then just add those fields to the boxes in your page. I tend to add an apostrophe before the @ symbol in Excel so it doesn't think it's a function - as per text you quoted above.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.

How can I create a one image per page caption sheet that includes the description in Bridge?

I am trying to find a way to create a one-image-per-page caption sheet for my workflow. I currently place each image into Word and copy the description onto the document, then repeat for each image. I am hoping that there is a way to automate this process using Bridge. I know that it can be done using Lightroom, however, that is not currently an option for me. Is this something that can be done or am I bound, like Sisyphus to Microsoft Word? I have a very limited grasp of scripting, but I feel like this is possible.
Thanks for any help.

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

How to save a pdf with multiple slides per page

I have multiple pdf files that I would like to combine but for some of those files, there were originally from powerpoint. For those files, I would like to change the pdf so that there are multiple slides per page. I don't have a copy of the original powerpoints. I am trying to find an easy way to do this because I have at least a hundred pdfs to do. Thank you!

You could print a PDF to the Adobe PDF printer, and select multiple Pages per Sheet on the Layout tab of the printer Properties dialog. Printing a PDF to PDF is generally frowned upon, but once it a while it comes in handy. It could have some unwelcome side effects though like wiping out your carefully crafted accessibility tags, bookmarks, and some document properties.

How to print multiple sheets per page?

Please advise how, if it is possible, to print multiple sheets per page with Acrobat 7.0 Pro. I have a PDF that's about 24" x 60". I'd like to make a "poor man's poster" by printing on several pages and taping them together -- sort of like Microsoft's "Fit to <x pages> tall by <y pages> wide" feature. Can this be done with Acrobat 7.0 Pro? Thanks. -Kurt

That is typically a function of the print driver for Acrobat. One way to do it is to print to a new PDF and select the printer properties and select multi-up. Bill

Multiple photos per page not working :( Please help

I see the option for multiple photos per page. It was available 5 minutes ago but now is grayed out and I can not get it back. This is very annoying. Can someone tell me why iPhoto won't let me print multiple photos on the same sheet?
Thanks

Remember that we know nothing except what you tell us - that it is not working is not much
The most common reason that print multiple photos per page is grayed out is that you either have a photo size/paper size combination that will not fit multiple photos (ie trying to print 2 8x10 photos on an 8 1/2 x 11 paper) or you have not selected but one photo
If these do not help please give us some more detail on what you are doing
:LN

Help! Error when data merging multiple records per page

I managed to get one record per page to display great.
When I try to insert the text box into my master page and run to create multiple entries per page it gives me only one result:
Any ideas on where I'm going wrong?

Before merge
After Merge

Multiple images per page

Similar Messages

Maybe you are looking for