Multiple Images - selection for pre loading
The preload image behaviour supplied within Dreamweaver is fine up to a point, but it inserts javascript files and is a pain to use if, for instance, you have 20 or so images to load. Or maybe I'm just lazy!
It is possible to preload images using CSS2 (see http://www.thecssninja.com/css/even-better-image-preloading-with-css2 ) and in CSS3 (see http://perishablepress.com/press/2010/01/04/preload-images-css3/ )
But none of these give you the option to browse to a folder, select a group of images from it and paste the results into the the code.
Has anyone found an extension that will do this?
>>What seems to be happening the first time is the
image isn't loaded before
>>the fade is finished, so the image just appears after
a short pause the
>>first time.
As has been said many times in thos forum - use the
MovieClipLoader class to
load images, and then use that class' onLoadInit method to do
things with
the loaded image. Loading is asynchronous - you _have_ to
wait until the
image is done loading before doing a fade.
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/
Similar Messages
-
Multiple images selected; rate just one?
Is there a way in Aperture to have multiple images selected but change the rating on just the primary select? I could have sworn I've done this before but now, if I (for example) shift-click to select three images, clicking on one of them and changing the rating affects all three.
Regards,
fhEdit>Primary Only
Ian -
Rating 1 image when multiple images selected in Viewer
In the Viewer is there a way to rate only 1 of multiple images selected.
One usually views multiple variations or versions in the Viewer to be able to make a choice of which particular one to keep. However when you try and rate one of those all selected images take on the same rating/label etc.
Is there a way to rate only one image?
CheersIt is, thanks very much for prompt response.
-
How do I change the image selected for the finalized movies pane in all events?
How do I change the image selected for the finalized movies pane in all events? I made a movie some time ago in iMovie, and a still from this now appears as the image for Finalized Movies in the All Events pane (as well as showing up if I then click on this pane to take me to Finalized Movies). Anyone know how to change or delete this image, please?
Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com -
F-44 ZBAPI MULTIPLE LINE SELECTIONS FOR WEB SERVICES
HI TO ALL,
I HAVE WRITTEN ZBAPI FOR POSTING MULTIPLE LINE SELECTIONS FOR TCODE F-44, THE ZBAPI CONSIST OF BDC PROGRAM, WHICH IS WORKING IN SAP SYSTEM PERFECTLY BUT WHEN I AM USING IT IN WEB SERVICES IT IS THROWING A ERROR MESSAGE.
PLEASE CAN ANY ONE TELL ME DOES THIS PROCESS WILL WORK OR NOT, IF YES HOW IS IT POSSIBLEHi Gabriel,
Let me try to answer some of your questions:
1) The "Requires Secure Access" attribute of a resource handler controls whether this handler must be accessed/consumed only over SSL (HTTPS). Oracle Database Cloud Schema Service is only offered over SSL, so this attribute does not have any effect on RESTful services deployed in this environment (because secure access is always required and there is no other way). That said, if you want to access such web service from your own APEX instance, your instance must have Oracle Wallet configured with appropriate SSL certificate.
2) The URI parameters are not required. If your web service returns data for many entities (for example, list of employees in employees/), you may not need a parameter. If your web service returns data for one specific entity (for example, details of one employee in employees/{id}), you may want to identify that entity with a URI parameter.
3) You can have many URI parameters, for example: customers/{id}/orders/{order_id}.
4) Yes, these are the same HTTP methods/verbs you would use from PHP.
5) If you are trying this POST example from your own APEX instance (not Oracle Database Cloud Schema Service) and you are trying to access a web service over SSL, then it is likely that the Oracle Wallet used by your instance does not include the required SSL certificate(s), or the Oracle Wallet is not configured at all.
6) I recommend to check RESTful Web Services for the Oracle Database Cloud white paper and Oracle REST Data Services Developers Guide. Oracle REST Data Services is the technology that enables RESTful services in the Oracle Database Cloud Schema Service.
You can certainly create your own web services in the Oracle Database Cloud Schema Service and consume them from the same environment.
Vlad -
Multiple Range Selection for field Material in CS14
Hi friends ,
Is it possible to make multiple range selection for material field in tcode CS14 [used to compare primary and secondary BOM] i have made it ZCS14.
if i make matnr2 to matnr2-low
but my doubt is it feasible solution
please through some light on this
regards
sooryaDear Soorya,
What's your requirement? is that to compare the Alternative BOM's for multiple materials at the same time?
If it's going to be for comparing one more alternative for the same material,then it's a good report.
As per to my knowledge if the report is going to be for a list of materials Alternative BOM's means I dont
think whether it will be a fast(time wise) report.
Check & revert back.
Regards
Mangalraj.S -
Multiple line selection for RRI in WAD
Is it possible to select multiple lines from 1 query and do a RRI to the receiver query. Eg : Select multiple POs and then go to PO details query which shows PO details of multiple POs in WAD and both the results shown in the same web report?
I tried the below solution, but all I get is the display of the entire Master data dump and not the filtered values. Any suggestion?????
Rao
Posts: 135
Registered: 6/24/04
Forum Points: 8
Re: Multiple line selection for RRI
Posted: Feb 4, 2008 2:22 PM in response to: LAKSHMI HARINDRAN Reply
Yes. You can do this. You create web template with ANALYSIS web item. In the item parameters of ANALYSIS web item, you can set a property, single line or multiple for the runtime selection. Once you do this, you create a button option or context selection menu option to jump target. In the button (RRI button) in the command sequence, the first command should be SET_SELECTION_STATE_BY_BINDING and then, the RRI command to jump to the target. Hope it will help.
Venny.Hi, Do you have any solution on this. please suggest. Thanks
-
Multiple image selection.
Hi java professionals...
I have a coursework, to write an interface for NIM game.
My main problem is to select multiple images.
Basically I need to code something similar to this (http://www.robtex.com/robban/nim1.htm) design, like select several images, press the button and images should disappear.
Does anybody now how to do multiple selection of images? if it is possible of course..You just need to capture mouse presses and do your
painting (images and such) onto a component.
You can use this to emulate "selecting images".
It would work something like this.
Paint your image somewhere in the component.
On a mouse click check if an image resides at that location on the
screen. If so set a virtual "selected" flag and draw whatever is
necessary to present it as such.
Good luck. -
Delete Versions/Delete Master and All Versions w/ Multiple Images Selected
When I select multiple images from a project (one image has a thicker white line around it and the other selected images have a thinner white line) and then select Delete Master and All Version the ONLY image that gets deleted is the one with the thicker white line. Whereas if I were to choose Delete Version all of the images are deleted?
Am I not able to perform Delete Master and All Versions on multiple files? It is not working for me.Try turning off:
Edit >> Primary Only
DLS -
Aperture 3 - Multiple Image Selection Bug?
I am experiencing an issue within Aperture (v3.0.3) where by from a project folder containing a large number of photos, I rate the ones I wish to keep (typically 3 * and above) and these are all automatically selected for an album.
Whilst this smart album shows the correct number of images, If I use these as the basis for a book or even a static album, a larger number of images (seems to include any within a series) appear.
Am I using Aperture incorrectly?
Why does it show the correct number of images within the smart album, but copying everything shows a higher number within a book?
It also doesn't seem possible to show just a subset of photos within a book, so I have to get the number correct to save having to go through all photos for the book selection.
Is this a bug? It certainly appears to be a bug with the way in which this is working.
Thanks for your feedback...Thanks for the response Kirby.
Essentially when I refer to 'series' I am talking about Aperture's stacks (I used the wrong phrase originally).
If I have a stack of 10 photos, however only a single one has been rated as 3 star or above (my criteria for being selected into the smart album and/or book), it seems that all 10 photos would appear in the books' photo selection.
This means that from one photo project where approximately 1800 photos were taken, I had rated around 200 of these as 3 star and above, which is the number of photos that correctly appears in the smart album.
If I then 'select all' from the smart album and use these as the basis for a book, I would expect to see only the 200 photos for selection within the book, however I see nearly 800 photos which is the total number of photos within the stacks visible in the smart album (whether photos are visible and rated sufficiently or not).
It's not possible to change the view of photos for the book selection process, so it appears to only list those photos you have chosen, however I see many photos I didn't "choose"...
Does this make it any clearer?
Thanks -
Multiple keystrokes selection for a JComboBox in JTable
Has anyone used multiple keystrokes selection in a JComboBox inside JTable before? I can get it done outside JTable by using: http://javaalmanac.com/egs/javax.swing/combobox_CbMultiKey.html
Looks like JTable has all kinds of problems to support JComboBox.
Suggestions?
Thanks,
JamesIf I read you right, you want to use a multiple keystroke combo box as an editor in a JTable?
If you create the JComboBox as you would like it and then install it as an editor in the column(s) JTable the editor will work like the JComboBox
Example:
//- you would have that keyselection Manager class
// This key selection manager will handle selections based on multiple keys.
class MyKeySelectionManager implements JComboBox.KeySelectionManager { .... };
//- Create the JComboBox with the multiple keystroke ability
//- Create a read-only combobox
String[] items = {"Ant", "Ape", "Bat", "Boa", "Cat", "Cow"};
JComboBox cboBox = new JComboBox(items);
// Install the custom key selection manager
cboBox.setKeySelectionManager(new MyKeySelectionManager());
//- combo box editor for the JTable
DefaultCellEditor cboBoxCellEditor = new DefaultCellEditor(cboBox);
//- set the editor to the specified COlumn in the JTable - for example the first column (0)
tcm.getColumn(0).setCellEditor(cboBoxCellEditor); Finally, it may be necessary to to put a KeyPressed listener for the Tab key, and if you enter the column that has the JComboBox:
1) start the editting
table.editCellAt(row, col);2) get the editor component and cast it into a JComboBox (in this case)
Component comp = table.getEditorComponent();
JComboBox cboComp = (JComboBox) comp;3) give this compent the foucus to do its deed
cboComp.requestFocus();Hope this helps!
dd -
Issue rating individual images when multiple images selected
In Lightroom 4.1 when rating (flags, stars or colors) a selected group of images all images selected will have the same flag applied. For instance if I select 10 images to view in the survey mode to compare and select 1 to be flagged as rejected all 10 will be flagged rejected, not just the one. Is there a way to turn this off to select a group of images and flag each differently?
Wonderful! Thank you so much, that worked. It has been driving me crazy for days!
-
Multiple row select for table not working..
Hi Experts,
I have a table in ABAP Web Dynpro where I have enabled the multiple row select functionality. I can select all and deselect all. I can also select a block of adjacent rows of table by choosing first and last by pressing Shift key.
But I am not able to select multiple individual records for that table.
I tried the same thing in different system and it works fine there.
Please let me know if we are missing some standard plugin or we need to enable this in some settings.
System where the issue is:
SAP_APPL: release 600, level 18
SAP_BASIS: Release 700, level 22
System where it is working fine:
SAP_APPL: release 604, level 8
SAP_BASIS: release 701, level 8
Regards,
Anand KolteHi
Press CTRL key and Select records, you can select multiple records, continuously or randomly your desired selection.
Cheers,
Kris. -
In prod order multiple batch selection for my raw material /sf possible
Dear All,
One of problem I am facing is regarding multiple batch selection .
Scenario is like this
Finished prdt _ FMBLD003
RAW matl - 2RCH001
In prodn order my BOM requirement quantity for 2RCH001 IS 75 kg , I have material available in stock in three diffrent batches
0000111 40 kg
0000112 15 kg
0000113 30 kg
I can select any one batch at a time. Is there any option or possibility available wherein we can select multiple batches .
or Is there possibility that system should automatically split bom quantity as per the batch quantity available shown below
40 0000111
15 0000112
20 0000113
I tried but didnt found possible solution.
Please suggest .
Edited by: sapitheprabhu on May 3, 2011 7:28 AM
Edited by: sapitheprabhu on May 3, 2011 7:48 AMDear Prabhu,
When do batch determination you maintain req qty against to batch number in batch determination co: select batch.
0000111 40 kg
0000112 15 kg
0000113 30 kg
Jainashu -
Multiple row selection for table element
Hi,
I have a requirement where I require to select multiple rows from a table element in a WD for abap application.
I have defined a node with cardinality and selection set to 1..n.
The contex node contains 4 fields : emp_name, pernr, manager and position.
The attributes of the table element for selectionmode is set to 'multi' and 'selectionchangebehaviour' is set to 'auto'.
I have defined an action on the 'onleadselection' event.
The code in this method also includes the statement 'lo_el_team_view->set_selected( EXPORTING flag = abap_true ).'
When I execute the application only 1 row is highlighted at any one time when I select it. You can select multiple rows by holding down the 'ctrl' key but I want to avoid having to do this. Is there anything I have missed out causing multiple row selections not to be all highlighted.
Thanks in advance for any assistance.Hi raj,
you can try the following code in the 'onleadselect' event of the table,
create one attribute ' Flag' of type WDY_BOOLEAN under the node which has been binded to the table.
DATA lo_nd_node_tab1 TYPE REF TO if_wd_context_node.
DATA lo_el_node_tab1 TYPE REF TO if_wd_context_element.
DATA lo_elements TYPE wdr_context_element_set.
DATA lo_ele_select_new TYPE REF TO if_wd_context_element.
DATA lv_deselect TYPE wdy_boolean.
DATA lv_flag TYPE wdy_boolean.
DATA lv_select TYPE wdy_boolean.
DATA lv_index TYPE i VALUE 0.
lo_nd_node_tab1 = wd_context->get_child_node( name = wd_this->wdctx_node_tab1 ).
get the current selected element
lo_ele_select_new = wdevent->get_context_element( name = 'NEW_ROW_ELEMENT' ).
CHECK lo_ele_select_new IS NOT INITIAL.
check whether it has been selected or not
CALL METHOD lo_ele_select_new->is_selected
RECEIVING
flag = lv_select.
lo_ele_select_new->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_deselect ).
check whether element has been previously selected or not,if not, set the flag to select it
IF lv_select IS NOT INITIAL AND lv_deselect IS INITIAL.
lo_ele_select_new->set_attribute( name = 'FLAG' value = 'X' ).
if selected currently and previously then set the flag as false,in order to delect it
ELSEIF lv_select IS NOT INITIAL AND lv_deselect IS NOT INITIAL..
lo_ele_select_new->set_attribute( name = 'FLAG' value = ' ' ).
ENDIF.
CALL METHOD lo_nd_node_tab1->get_elements
RECEIVING
set = lo_elements.
according to the falg, select and delect the elements
LOOP AT lo_elements INTO lo_el_node_tab1.
lo_el_node_tab1->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_flag ).
IF lv_flag = 'X'.
lo_el_node_tab1->set_selected( abap_true ).
lo_nd_node_tab1->set_lead_selection_index( lv_index ). * this statement deselects the lead selection index*
ELSE.
lo_el_node_tab1->set_selected( abap_false ).
lo_nd_node_tab1->set_lead_selection_index( lv_index ).
ENDIF.
ENDLOOP.
I hope this resolves your problem.
Thanks,
krishna
Maybe you are looking for
-
SWC PNG's invisible when compression is set to JPEG in Flash Builder 4.7/AIR 3.4
Moved my ActionScript Mobile Project game from Flash Builder 4.6 / AIR 3.2 yesterday to the new release of 4.7 / AIR 3.4. One side effect was that when my PNG's in my assets SWC were set to use JPEG compression instead of PNG, they are invisible at r
-
how do we upload vendor master data into SAP from legacy system.can anyone give me a detailed explination. regards, deepthi
-
Is there a way to save InDesign CS6's help files to hard drive for access off-line?
I can't figure out how to do this. I often take my laptop where there is no internet or weak internet. Help doesn't work when I'm there. Surely there's a way to do this, right? How? I'm using the Middle Eastern version 8.0.2 (Hebrew-English). I need
-
Create a reciprocal relationship on customers from order import
We are working on importing customers from an order. When we import two accounts it is able to create the relationship but it doesn't make it reciprocal. We tried setting the checkbox "Allow Reciprocal Relationship" in AR to see if that would do anyt
-
Move or write to not doing conversion routine
I have two types of a file structure TYPES: BEGIN OF ty_est_archivo, mandt TYPE mandt, bukrs TYPE bukrs, gjahr TYPE gjahr, monat TYPE monat, xblnr(20), nacem(16), ctasc(10), transact_number TYPE cjtransnumb, transact_name(30), mwskz TYPE mwskz, cbase