Multiple imaging storage server

Hello
We have 2 Netware server. The first with Netware 6.5 SP7 and ZEN 6.5 (Imaging, PXE, .....). In this server, we have all of ours zmg files.
The second with Netware 6.5 SP7.
We want to put some images on the second server, and can use them when we make a computer, or can upload image by Imaging.
I think we must install Imaging services on the second server, but is it all ?
Must we configure something ?
Thanks for your help
KissKool

On Mon, 17 Mar 2008 08:56:02 GMT, kisskool72 wrote:
> I think we must install Imaging services on the second server, but is
> it all ?
yes.. except the PXE part.. you can have that too on the second server but
it isn't needed
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please remove the - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.didas.de

Similar Messages

Multiple Image Storage

Hi all,
I need to store multiple images into the database. I am using stored procedure for the same.
I am passing image as byte[] and since i have to store multiple images at one go, I am just switching between my Java code and the database procedure for each image.
And in each rotation, the record is committed.
I have a small problem here.
If I have a total of 5 images and if the 4th image was not stored b'coz of some reason; so.. i'll have the other 4 images stored successfully.
I was actually thinking of a way to store all the images or none.
I hope i made my problem clear.
I had posted an issue earlier. Pls refer to this link:
Reg: Stroring multiple images in a single transaction
After some browsing, I found that bytes sent inside an XML might get corrupted. And I need to encode the bytes to character data to send in XML.
But, if i encode this byte[] in my java program, how do I decode this image character data inside the stored procedure?
I surfed for this on the net... but could not get much info.
And I was asked not to use dbms_lob at all.
Any help would be highly appreciated.
Thanks n Regards,
Edited by: user637029 on Feb 24, 2013 12:15 AM

To address the question regarding "store all the images or none at all"
that's easy: don't commit in between the loading of the images. Then it will be a single transaction which can be either committed or rolled back.
And I was asked not to use dbms_lob at alllike I said before today: forget about the idea of a database independent application with a single code base.

Multiple Image Upload and watermarking

Hi,
I am using a gallery script which takes main images from a dynamic folder and creates thumbnails on the fly.
It gets the main images dynamically from
$config['fulls'] = $_GET['imgfolder_id'];
Then GD is applied to create thumbnails on the fly. There is no GD role for the main images. I use lightbox to show pop-up image. And the images are uploaded to a dynamic folder using ADDT multiple image upload server behavior.
My requirement: want to apply water mark on the large (pop-up) image. Not on the thumbnail.
Is it possible to have the water mark applied at the time of Multiple Image Upload?
Thanks for any help
Jay

Hi Jay,
if it were a single image upload, I would have suggested to apply a PHP watermark script to the uploaded image by embedding that code in a Custom Trigger, type AFTER -- but as the multiple upload gets proceeded by a flash file, I have no clue how to do that.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How do I stop iWeb outputting multiple image files? It makes my site slow!

I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?

Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com

ADDT multiple image upload: "error 500"

Right now, I have managed to get the update record form wizard working, the right input ends up in the correct fields in the database.
So I'm left fighting with the "multiple image upload", which gives me an "error 500" message (error connecting to server)
The window does show me the correct files in the correct folder, but when I try and upload an image I always get the error 500 message.
I have read that the "multiple file upload" uses a temporary folder, and Im assuming that the "multiple image upload" does the same, and I suppose that I should CHMOD that folder to 777.
Do you know where I can find that folder?
Can anyone help me with that error?
Please?
Sorry about my name, I tried a lot of other names, and all were taken, but this random name went just fine

I thought it did - When I used the upload and save to database it saved the original images in a folder and created a sub folder called "thumbnails" and saved the thumbnails - origianl filesname just with width and height appended at the end.
I checked my server files and their definately created.
I browsed the java script and the help files which mentions it does this but I would like to be able to change the naming format of the thumbanils if possible

Multiple image upload CRASH!!! but works with simple image upload

I'm getting MAD.
I'm using php and GD
While the simple image and re size works like a charm, the multiple image upload or the multiple file upload have a strange behavior.
It opens the pop-up with flash, then eventually shows me files or thumbnails but when I try to up load I just wait and get the typical "system becoming unstable" flash error.
As I can see the directory is always generated (I've tried also to put a static directory) but after stargin the upload the flash uploader just crashes and no result.
Any help would be really appreciated

Hi Fonzie,
as the folder is getting created, the issue you´re having is not related to wrong folder permission - it´s something else...
As I wrote before, che common upload and resize function works perfectly
this one works perfectly, because it´s just one file to upload and to process, wheras doing that with multiple files might collide with some settings on your server
So for sure it's not a simple issue as the max filesize
Are you sure ? Did you check the current "max_upload_filesize" setting ? As long you don´t check it, you can´t know :-)
As a general rule of thumb, it´s important to be aware of the fact that uploading & resizing images on the server might collide with several PHP settings -- and the more images you upload and resize in one swoop, the closer you´re getting to these limits respectively might even be exceeding them. The following "directives" are those which have an effect on whether your image/file upload & processing will work or not:
- "max_upload_filesize" :: is sometimes set to just 8 MB on a shared hosting, sometimes 16 MB, sometimes more. This setting will affect the file upload procedure only
- "set_time_limit" (e.g. 30 seconds) :: if the execution time of a script exceeds this limit for whatever reason, the server simply shuts it down without letting you (respectively the flash uploader) know it´s been shut down. This *might* be the reason why ADDT´s flash uploader hangs respectively returns that error message after some time, because it´s waiting for some response from the server which never comes.
- "memory_limit" (e.g. 8 MB) :: this directive is a sort of "allocated server RAM" for your account, and it´s in particular the image resizing process which will grab more or less memory resources -- the higher the the resizing factor is, the more RAM is spent, and the more images are getting resized in one swoop, the worser it gets.
However, all these PHP directives can be changed, and your host might even be so courteous to increase the currently defined values of those abovementioned directives for you -- and that´s what I´m suggesting at this point.
Cheers
Günter Schenk
Adobe Community Expert, Dreamweaver

Windows storage server 2008 R2 ISO

Hi All,
from where I can download ISO image for Windows storage server 2008 R2 Standard?
The key is written on the sticker which is on the Server which is for windows server 2008 Storage r2.Please let me know can i use this key for windows server 2008 r2 standard standard as well for this server?
For how much time that key will be validated?
Need Urgent response.
Thanks.

Hi,
Windows Storage Server 2008 R2 is vendor specified OS and it should be pre-loaded by hardware manufacturer. You may not able to get it without contact OEM manufacturer.
For more detailed information, please refer to the thread below:
How to install Windows 2008 R2 Storage Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/575a6b4b-c026-4d2d-98a8-44a19783e59a/how-to-install-windows-2008-r2-storage-server
You cannot use Windows Storage Server 2008 R2 OME key for Windows Server 2008 r2 Standard.
OEM activation is valid as long as the customer uses the OEM-provided image on a system.
Learn About Product Activation
http://technet.microsoft.com/en-us/library/ff793423.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Storage Server 2008 - unzip with drag & drop from Windows 7 client fails

Hello.
As i asked this question in German and got no answer so i try it in English now.
I have the following problem:
We have a Windows SBS 2008, where we store our files. If somebody opens a ZIP-file on a network share from a Windows 7 Client (64 Bit) it is possible to drag & drop the content (multiple files) to a directory. So far everything works as expected.
We now have an additional Windows Storage Server 2008 integrated in our domain (Buffalo Tera Station WS-QV8/R5), where we also store files. If somebody opens the same ZIP-file on a network share of this server from a Windows 7 Client and tries to drag &
drop the content the following happens:
1. only one file is extracted and to display the file a refresh of the explorer view is needed.
2. when the drag & drop action is repeated a second file is extracted
Not alle files are extracted and there is no error message or indication why this happens.
The behaviour is reproducible from another Windows 7 Client (32 Bit).
If we try to drag & drop the files from the ZIP-file on the Windows Storage Server network sahre to a directory on the SBS network share all files are extracted correctly.
On the Windows Storage Server itself all files are extracted without problmems. Therefore it must be a problem with the combination of Windows Storage Server und Windows 7 Client accessing the files via network shares.
Are there any ideas where this problem could be located? Has anybody the same phenomenon and maybe a solution for it?
Thanks in advance
Michael Pruss

Hi Michael,
Thank you for clarifying the issue for us.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Regards
Kevin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.

Windows Storage Server 2008 backup fail to UEFI based computers

Hai All
I have got Windows Storage Server 2008 running on a WD Sentinel DX4000. Recently my company bought a couple of new Dell laptops all running windows 8.1 64bit OS. Only three older laptops were left. Now for the fun part...I installed the connectors pointing
to the Sentinel on the laptops, and as expected the pc's show on the dashboard of the Storage Server, but all of the backups fail on the newer laptops. I installed the connectors on the older laptops as well and they go through no problem
The only difference between the older laptops and the new ones are the GPT partition drives and laptops running on UEFI, the older laptops, although running the same OS, do not have GPT and UEFI. I looked at the Event Viewer and found three errors to do
with the backup: Event 514 pointing to a ClientVSSProblem, Event 8194 pointing to Volume Shadow Copy Service error: Unexpected error querrying for the VSSWriterCallback interface, hr=0x80070005,Access Denied and the last one is Event 513 CAPI2, Cryptographic
Service failed while processing onIdentity() call in the System Writerobject Details: AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol. I did as most articles suggested but with no change. From changing registries
to taking ownership of the %windir% and adding the NT AUTHORITY, the NT Service and BUILTIN\Users. No change.
Help is much appreciated before i make a boat anchor out of the WD Sentinel.
Kind regards

Well looks like there is a change or two to be made on the client computer, granting some access to the NT Services and NT Authority. To automate this fix I wrote a batch file to be run on the client pc:
takeown /f %windir%\winsxs\temp\PendingRenames /a
pause
icacls %windir%\winsxs\temp\PendingRenames /grant "NT AUTHORITY\SYSTEM":(RX)
pause
icacls %windir%\winsxs\temp\PendingRenames /grant "NT Service\trustedinstaller":(F)
pause
icacls %windir%\winsxs\temp\PendingRenames /grant "BUILTIN\Users":(RX)
pause
takeown /f %windir%\winsxs\filemaps\* /a
pause
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM":(RX)
pause
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller":(F)
pause
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users":(RX)
net stop cryptsvc
pause
net start cryptsvc
pause
The backup now starts on the Sentinel
Kind Regards

To convert multiple image files to pdf using pdfsharp in C#

Hey guys I have this C# code to convert any image file to .pdf using pdfsharp.dll. But I want to select multiple images for conversion please help. here's my code (plz note enable pdfsharp.dll in the reference)
usingSystem;
usingSystem.Collections.Generic;
usingSystem.Linq;
usingSystem.Text;
usingSystem.Threading.Tasks;
usingPdfSharp.Pdf;
usingPdfSharp.Drawing;
usingSystem.IO;
namespaceConsoleApplication1
classProgram
staticvoidMain(string[]
args)
PdfDocumentdoc =
newPdfDocument();
doc.Pages.Add(newPdfPage());
XGraphicsxgr =
XGraphics.FromPdfPage(doc.Pages[0]);
XImageimg =
XImage.FromFile(source
path...);
xgr.DrawImage(img,0,0);
doc.Save(destination path...);
doc.Close();

try this one
public string CreatePDF(System.Collections.Generic.List<byte[]> images)
dynamic PDFGeneratePath = Server.MapPath("../images/pdfimages/");
dynamic FileName = "attachmentpdf-" + DateTime.Now.Ticks + ".pdf";
if (images.Count >= 1) {
Document document = new Document(PageSize.LETTER);
try {
// Create pdfimages directory in images folder.
if ((!Directory.Exists(PDFGeneratePath))) {
Directory.CreateDirectory(PDFGeneratePath);
// we create a writer that listens to the document
// and directs a PDF-stream to a file
PdfWriter.GetInstance(document, new FileStream(PDFGeneratePath + FileName, FileMode.Create));
// opens up the document
document.Open();
// Add metadata to the document. This information is visible when viewing the
// Set images in table
PdfPTable imageTable = new PdfPTable(2);
imageTable.DefaultCell.Border = Rectangle.NO_BORDER;
imageTable.DefaultCell.HorizontalAlignment = Element.ALIGN_CENTER;
for (int ImageIndex = 0; ImageIndex <= images.Count - 1; ImageIndex++) {
if ((images(ImageIndex) != null) && (images(ImageIndex).Length > 0)) {
iTextSharp.text.Image pic = iTextSharp.text.Image.GetInstance(SRS.Utility.Utils.ByteArrayToImage(images(ImageIndex)), System.Drawing.Imaging.ImageFormat.Jpeg);
// Setting image resolution
if (pic.Height > pic.Width) {
float percentage = 0f;
percentage = 400 / pic.Height;
pic.ScalePercent(percentage * 100);
} else {
float percentage = 0f;
percentage = 240 / pic.Width;
pic.ScalePercent(percentage * 100);
pic.Border = iTextSharp.text.Rectangle.BOX;
pic.BorderColor = iTextSharp.text.BaseColor.BLACK;
pic.BorderWidth = 3f;
imageTable.AddCell(pic);
if (((ImageIndex + 1) % 6 == 0)) {
document.Add(imageTable);
document.NewPage();
imageTable = new PdfPTable(2);
imageTable.DefaultCell.Border = Rectangle.NO_BORDER;
imageTable.DefaultCell.HorizontalAlignment = Element.ALIGN_CENTER;
if ((ImageIndex == (images.Count - 1))) {
imageTable.AddCell(string.Empty);
document.Add(imageTable);
document.NewPage();
} catch (Exception ex) {
throw ex;
} finally {
// Close the document object
// Clean up
document.Close();
document = null;
return PDFGeneratePath + FileName;

Multiple image upload with save to database problem

I am developing some backend work for a client, and we recently used the Multiple image upload with save to database wizard without a problem. A few days later, we noticed that we could only upload a single file at a time - it seems that the coding is no longer able to access the flash part of this and is using the javasript function instead. I know the web hosting company has made some changes on the server, and I did some reearch and it seems that there could be an issue with Flash 10, but has anyone else experienced anything like this? Any help is greatly appreciated.
Thanks.
Jeremy

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Problem downloading multiple images in bytearray, Help !

Hi Everyone,
I m trying to download multiple images on my mobile as a part of my application.
On server side I have used System.arraycopy to merge arrays..
What I did on server side is as follows:
byte[] seperator={'%'};
totalImageArray=image1+seperator+image2
Please note everything is in bytearray.
Now on client side I m not able to extract two images seperately i.e. bytes before seperator and after seperator.
how do i do byte to byte comparison ?
Please guide me as to how I should do this..tips links snippet...??
Message was edited by:
siddhsdesai

Wht dont you send images seperate...
For example first write the size of first image as bytes and than write the first image. Then write the size of second image as bytes and than write the second image.
In the client side first read the first number and then read as many as that bytes then create first image. Then read the second number and then read as many as that bytes then create second image.
Server Side...
DataOutputStream toClient = new DataOutputStream (....);
toClient.writeInt(...); //send the sizeof first image as bytes
toClient.write(...); //send the first image as byte array
toClient.writeInt(...); //send the sizeof second image as bytes
toClient.write(...); //send the first second as byte array
toClient.flush();Client Side...
DataInputStream fromServer= new DataInputStream (....);
int firstsize=fromServer.readInt(); //read the sizeof first image as bytes
byte[] image1data=new byte[firstsize]; //image1 buffer
fromServer.readFully(image1data); //read the first image as byte array
int secondsize=fromServer.readInt(); //read the sizeof second image as bytes
byte[] image2data=new byte[secondsize]; //image2 buffer
fromServer.readFully(image2data); //read the second image as byte array

Multiple image upload with save to database wizard problem

hi,
i need to upload multiple images (6) in a table called pictures. i will need the names stored in the database and the files uploaded on the server. since i am new to dreamweaver i can not figure out on how to make this work.
the multiple image upload wizard uploads the images fine and creates a subfolder with the right id but i have no file names in the database at this point. i tried the multiple image upload with save to database wizard but i only get one upload button. it worked fine with one image but i need 6 pics uploaded. the i tried to first upload the pictures with the multiple image upload wizard and use the update wizard to add the names afterwards but that did not work either. hmm. would be great if someone could help me out.
thanks, jan

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Restrict image pixel size in multiple image upload

Re: Multiple Image Upload behaviour.
One of the only issues I have with this extension is if users try to upload an image within the limits I set (of 250Kb) but with a high pixel count.
For example, a jpg of 800 x 600 at 200Kb causes no problem, but a one of 2000 pixels at 150Kb probably will.
I understand that there is probably more server load to resize a large pixel image, so is there a way to check the pixel size of images to be uploaded as well as the file size and reject it if it is too large?

But what you could do, is retrieving the php.ini´s "post_max_size" value and display a note to your site visitors:
 
 
1. put this into the doc´s head:
 
 <?php $replace_max_size_MB = str_replace("M"," MB",ini_get('post_max_size')); ?>
 
 
2. the related message:
 
 Pics larger than <?php echo $replace_max_size_MB; ?> will be rejected by the server
 
 Cheers,
 Günter Schenk
 Adobe Community Expert, Dreamweaver

Function for uploading multiple images, say 5000 , of any type?

Hi,
I want to upload multiple images which are stored anywhere, be it a local system or a server, to the SAP database just by clicking a single button. The method should be able to pick all the images and check their file types and upload it.
My concerns are that:
1. How to specify the path where the images are stored?
2. How to check the extension of the different files. it is possible that the folder may contain some other file types? So how to distinguish between them?
3. How to deal when the folders may contain some subfolders?
4. How to display the uploaded images back to the user?
Regards
Amit Kumar Singh

I would guess its because all of the file fields all have the
same name. Try naming them dynamically: micro1, micro2, micro3,
etc.
A few minor comments about the code
- Afaik, setting the VALUE has no effect for input fields
when type="file"
- FILE is deprecated. Use CFFILE.ServerFile instead
- You don't need # signs here <cfset numberoffields =
#cookie.micro#>
Not tested

Multiple imaging storage server

Similar Messages

Maybe you are looking for