Multiple import issues (ran out of troubleshooting ideas) - LR3
I reformatted the card in my camera prior to shooting so I don't think the files are damaged, especially since they appear to work in Bridge/Photoshop just fine; however, when I attempt to import via my SDHC card & USB reader I get one of two errors: Could not copy a file to requested location, or the following files were not imported because they could not be read.
The "Could Not Copy File..." error message appears when I try to import directly via the USB reader/SDHC card. When I take the files from the SDHC card and drag them to the desktop, put them in their own folder (there are 200+ files) and try to import from that folder, I got the same error message. I'm not sure when I got the message about not being able to read the files. I'm trying to import these every which way, and the files seem to be OK because they work in Bridge. It's worth noting I am unable at this point to import ANYTHING into LR3. Even a random jpg I found on my computer won't import.
HERE IS WHAT I HAVE I TRIED:
Restarting my computer
Quitting LR3 and restarting
Optimizing my LR3 catalog
Creating a brand-new catalog and trying to import photos there with the hope of combining catalogs later (received the same error message)
Any help would be MUCH appreciated. I have an assignment due in class tomorrow and I'm stuck until I figure out what the heck is going on. Thanks again.
PS: I also don't know why I'm getting that 2010 Question-Mark error below. I removed that folder when I saw it earlier today, and it appeared again. I haven't seen that before, nor have I experienced this problem ever before.
The question mark on the folder indicates that the OS has been used to relocate, move or delete files, sometimes to an external hdd.
You should right click or command click on the folder and point Lightroom by navigating to the correct location.
Whether or not this is causing the import conflict remains to be seen but the folder does look like a top level folder.
Similar Messages
-
Create multiple paged pdf, ran out of room?
I'm trying to create a 19 page pdf in AI, but it will not let me. Is there some way to resize the canvas, or something? I need 19 letter sized pages but it won't let me create them. Thanks for any help
It is probably because you are trying to arrange the artboards in a straight single row and you have run out of canvas space on the right side. if you cgose a different configuration you will be able to do what you wish to accomplish.
The way you can accomplish what you wish is to create one artboard move it to the left then in the artboard panel choose duplicate artboard 18 times.
The other way is make a letter size rectangle and move that to the left of the canvas and then use the Object>Transform>Move (Copy) and then the Command D to make 19 rectangles or use the Effect>Distort and Transform>Transform move the rectangle the width of the rectangle plus extra for the gutter and choose 18 copies then expand the appearance select all the rectangles and go to Object>Artboards>Convert to Artboards.
Otherwise you are just going to get this message.
Then make a template. -
[JAXB] Multiple imports in the root node
Hello,
I use JAXB and am doing this scenario : unmarshalling an XML document created manually, and automatically marshalling another from the generated Java code.
This is a multiple schemas / multiple imports issue.
I would like the 2 XML documents to be similar, but in the first one, I get :
<?xml version="1.0" encoding="UTF-8"?>
<aaa:first xmlns:aaa="http://aaa" xmlns:bbb="http://bbb">
</aaa>
and in the second :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<aaa:first xmlns:aaa="http://aaa" xmlns:ns1="urn:abc" ...>
<bbb:second xmlns:bbb="http://bbb">
</bbb>
</aaa>
So, how is that possible to import multiple namespaces (xmlns) in a single node please ? It seems that JAXB does the import only when needed, and won't group all the imports in the root node.
(moreover, how can I disable the "standalone" attribute in the header of the generated XML document please ?)
Thanks in advance.Ok, I found a solution to get all namespaces placed in the root of the generated XML document : one have to implement a NamespacePrefixMapper
marshaller.setProperty("com.sun.xml.bind.namespacePrefixMapper",new NamespacePrefixMapperImpl());and redefining its ' public String[] getPreDeclaredNamespaceUris()' method.
For now, the problem is that namespaces declared there are somehow static. In fact, when unmarshalling Java objects from an XML document, it seems that this document namespaces are lost.
Do you know a way these namespaces would be kept somewhere, associated with the unmarshalled object ? I need these namespaces in the case that I would create another XML file from it in the future.
It's seems logical to keep this with the object, so did I miss something please ? -
I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. I can see the HD but the volume part is greyed out. Any ideas on how to recover my data?
There are other methodologies of scanning a HD
which involve data extraction, but loss of metadata is often the result if the directory is corrupt.
Metadata is the info on what the data IS.
Like having all your papers thrown in the air, its all there, but just a giant mess.
This is why you always always must have several external HD redundancies of your data. One isnt enough, neither is two really.
see here, and dont let that happen again>
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Was that your only copy of your priceless data? Just that one external HD? -
I am trying to download an update to my iphone, but in the middle of the download, I get an error message that reads, 'There was problem downloading the software for the iphone. The network connection timed out'. Any idea how to reslove this issue?
Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley -
(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.
(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.
-
Help! Safari keeps giving me a grey screen. I can't click on any search items. Any troubleshooting ideas out there?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
My daugter was using our Ipad when the battery ran out. Having recharged it adn trying to swotch back on is immediately dosplays teh sysmbol for pluging into ITunes. When doing so the computer says it must restore the Ipad and update it. When doing so it fails, displaying unknown error 28 - looking at more info, it makes little sense other than a possible hgardware fault. This is on an orignal IPad with 3G and the operating system hasn't been updated for a while. Any ideas please. Mike
My daugter was using our Ipad when the battery ran out. Having recharged it adn trying to swotch back on is immediately dosplays teh sysmbol for pluging into ITunes. When doing so the computer says it must restore the Ipad and update it. When doing so it fails, displaying unknown error 28 - looking at more info, it makes little sense other than a possible hgardware fault. This is on an orignal IPad with 3G and the operating system hasn't been updated for a while. Any ideas please. Mike
-
BW system ran out of "session" = transaction SMGW; how to track down "resource" issues?
Hi SAP Experts,
we had on our SAP BW system the following situation:
We are having a week daily process chains, that is uploading data from our ECC system.
Once in a month, we are uploading from our APO/SCM system data from our BW system.
Parallel we are having also SAP PreCalculation Server (with three PreCalc instances) instances running. The PreCalc Server is running daily.
The landscape in short: (DB server = AIX/Oracle, App-Server = Linux, SAP System=7.01; PreCalc Server = Win2008/64)
This week when all was running at the same time, we faced problems, that log-on to SAP System via ABAP took a long time, same BEx Reports (some failed with Run Time errors).
From the landscape infrastructure we couldn’t detect any resource issues (we are having two application servers connected to the BW landscape).
What we saw from the system transactions (SM66, SM51, SM21, ST02, ST04, ST06N) the issue did not seem to be resource based, by network, database, amount of work processes etc.
But we noticed in transaction SMGW, that it seemed not possible for external programs, like a BEx reports or the PreCalc Server to connect with new session to the BW ABAP landscape.
The trace showed in SMGW:
* LOCATION SAP-Gateway on host server / sapgw##
* ERROR Conversation 01792797 not found
* TIME Tue Jul 22 14:13:03 2014
* RELEASE 720
* COMPONENT SAP-Gateway
* VERSION 2
* RC 728
* MODULE gwxxconn.c
* LINE 971
* COUNTER 75240
In system log, database alert log, we could not find any dead locks reported or anything reported, that explained why, via the SMGW is was not possible to connect with new sessions.
We restarted the PreCalc Server and after clarifying with application team of APO/SCM we stop the process chain and than the system was back to “normal” operation.
Now the question is, if you faced similar issues and what the solution, or how you where able to track down the issue?
Thanks for your ideas.
Best regards
Carlos BehlauHi Alwina,
thank you for your help.
What I was able to is in SMGW, because the system was very slow, that some connection where "red".
I forgot to capture screenshots and now I am not able to recall the the status text.
It is there a way to find out, if we reach the "max" connection numbers, like parameter gw/max_conn 500, via ST03N or via SMGW or via some logs?
I checked the SMGW trace, but I am not able to identify via the trace in SMGW, if the failures happened now, because max. values of parameters have been reached or what the cause was/is.
What I meant:
All external programs, like SAP BW BEx Analyzer (Excel Reporting tool for BW) are connecting via RFC calls. Also SAP Pre-Calculation Server is using RFC calls to generate the reports and send them via E-mail.
Usually, I can see these connections in SMGW (goto => logon clients).
There I didn't noticed that we reach 500, when we had the problem.
Best regards
Carlos -
Ran out of hard drive space while importing AVCHD footage... cant delete?
I was importing about 6 hours of AVCHD footage I shot, however my macbook pro ran out of hard drive space about halfway through the import. It looks like iMovie got confused, and just hung. I forced quit the application, the video footage that was imported is now NOT showing up in iMovie, or in the Movies folder. However the file must be somewhere because I have zero space free.
Does anyone know where this file could be, and how I could nix it?
Thanks!I also tried setting up a smart folder showing all files created today- it does not show it.
-
T61 Video driver issue when battery ran out
When battery ran out the display goes back to default. I
need to uninstall & reinstall the Nvidia drivers in order to correct the
issue.
Can you please advise? How to fix it permanently?elementx, welcome to the forum,
if you could post your type and model number and which OS you have this would be a help. If your model number ends in CTO please provide some details about your T61 i.e. which graphic chip. This would help us to help you.
Which driver are you installing, maybe you could provide a link to it?
If you have a factory installation you could try installing the original driver which can be found in C:\swtools\drivers\video.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
I NEED help. Ran out of ideas.
I have 2 problems with the same Ipod.
The Ipod is an older model, monocolor screen, a click wheel. The ipod is currently formatted in Windows.
Now here's my problem, whenever I try to play a song it automatically skips it. The song title, and everything else comes up but the play timer stays at 0:00 and it just skips it, and then skips the next one, and the next one, and so on.
So, I tried everything i maunlly could to it and nothing worked. So then I decided to just plug it into my MacBook and restore it, and re-format it to Mac instead of Windows. But here is the second problem: Whenever I plug it in to my notebook, the ipod says "do not disconnect, and it comes up on my desktop, and then itunes pops up like it found the new device, but it doesn't show the ipod.
I have tried two things:
1. I ran the "software update"
2. I have updated Itunes to 7.1.1
Also, I ran the program alterPOD and even that found the program. But when I attempt to use the iSYNC it can't locate the ipod.
I have seriously ran out of ideas for both of the problems.
MacBook Mac OS X (10.4.9) 1.83GHz Intel Core Duo, 512MB RAMhave you tried restoring the ipod?
Restoring iPod to factory settings -
hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??
Apple Does Not recommend that. Please Read.
http://support.apple.com/kb/HT1490
From that article
"Portables with built-in batteries"
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
MacBook
MacBook (13-inch, Late 2009) and later
MacBook Air
MacBook Air (all models)
MacBook Pro
MacBook Pro with Retina display (all models)
MacBook Pro (13-inch, Mid 2009) and later
MacBook Pro (15-inch, Mid 2009) and later
MacBook Pro (17-inch, Early 2009) and later
Thanks.
Allan Mac wrote:
Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
Allan -
I just bought a new Classic 160gb because i ran out of room on my Classic 80gb. Can i copy all the music from my 80gb Classic on my 160 gb and still maintain seperate libraries----------Thank You ---Tom
Yes. The music on the old iPod will need to be stored in your iTunes library on your computer though for you to sync it over to the new iPod. See this article for different ways to handle multiple iPods with one computer.
http://support.apple.com/kb/ht1495
B-rock -
Iphoto import stalled when mac ran out of power
I was trying to import photos into iPhoto from a digital camera, when the Mac battery ran out of power. This seems to have caused the import to stall, and now I can't make it restart or even stop.
Here are the system data:
OS X Yosemite
iPhoto library is running from an external hard drive
Digital camera is Canon LG20Apple Menu -> Force Quit.
There is a high likelihood that your library will be damaged. Do you have a back up?
Maybe you are looking for
-
I want to connect my Mac Book Pro onto my TV. HOW?
I want to simply play videos and look at photos from my macbook pro and put them onto the TV. I will need to have both Audio and Video. I am useless at all the terminology of DVI HDMI and all that, i have no clue!! Can someone please tell me what i n
-
I have a power Mac G4 with a mirror front running 10.4.9. How current of an OS can I run on this machine? I want to put it back into use but need to upgrade the OS so that I can run the newest version of Quickbooks amoung other things.
-
Preview video jagged in CS3 (after system upgrade)
My production company just upgraded our production machines: Intel Core i7 870 chips 16 GB DDR3 ram GeForce GTX 465 graphics cards Windows 7 Pro 64-bit OS ... so these machines should have no problem running anything. We are still using CS 3 though,
-
Basic questions re zip, compression, and e-mailing large attachments
Hi, I have never really understood what is meant by "zip" and compressing a file. I believe these things make it possible to make a file smaller for sending via e-mail, and then when the person at the other end opens up the attachment, it returns to
-
SQL being generated improperly - JDBC bc - poll operation
I have a bpel process that is kicked off by a JDBC binding component's "poll" operation. I have the PollingPostProcessing value set to MarkColumn. I've set the MarkColumnName and MarkColumnValue parameters (see below). The column I'm marking is defin