Multiple & independant routing tables
Can the Catalyst 4500 support more than one routing table .
No, there is only one routing table. What is it you are trying to achieve? Maybe there is another way.
Kevin Dorrell
Luxembourg
Similar Messages
-
Eem script monitor routing table - multiple entries into 1 email
I have the following script running to report on routing table changes
event manager applet route-table-monitor
event routing network 0.0.0.0/0 ge 1
action 0.5 set msg "Route changed: Type: $_routing_type, Network: $_routing_network, Mask/Prefix: $_routing_mask, Protocol: $_routing_protocol, GW: $_routing_lastgateway, Intf: $_routing_lastinterface"
action 1.0 syslog msg "$msg"
action 2.0 cli command "enable"
action 4.0 info type routername
action 5.0 mail server "10.*.*.*" to "roger.perkin@****" from "Switch1" subject "Routing Table Change" body "$msg $_cli_result"
It works perfectly however if multiple routes change I get multiple emails.
Last night we had a site go out and I got about 20 separate email for each subnet change.
What I would like to do is get this script to take all routes changed in a 1 minute interval and then output them into an email.
Not quite sure how I would go about that?
Thanks
Roger
Currently studying for my CCIE and just started on EEM, have not done much scripting before so this is all good stuff to know.You can't do this with one policy. However, you could accomplish this with a timer policy that will batch up the pending updates, though. Something like this would work.
event manager applet route-table-monitor event routing network 0.0.0.0/0 ge 1 action 0.5 set msg "Route changed: Type: $_routing_type, Network: $_routing_network, Mask/Prefix: $_routing_mask, Protocol: $_routing_protocol, GW: $_routing_lastgateway, Intf: $_routing_lastinterface" action 0.6 syslog msg "$msg" action 1.0 handle-error type ignore action 2.0 context retrieve key RTRCTXT variable msgs action 3.0 if $_error ne FH_EOK action 4.0 set msgs "$msg\n" action 5.0 else action 6.0 append msgs "$msg\n" action 7.0 end action 8.0 handle-error type exit action 9.0 context save key RTRCTXT variable msgs!event manager applet route-table-batcher event timer watchdog time 60 action 1.0 handle-error type ignore action 2.0 context retrieve key RTRCTXT variable msgs action 3.0 if $_error eq FH_EOK action 4.0 info type routername action 5.0 mail server "10.*.*.*" to "roger.perkin@****" from "$_info_routername" subject "Routing Table Change" body "$msgs" action 6.0 end action 7.0 handle-error type exit -
Multiple routing tables and/or policy routing
Hey all,
I'm trying to configure a Mac Mini (10.8) for multiple routing tables and policy routing. This server runs Ostinato, a freeware traffic generator. My purpose is to generate traffic on multiple VLANs towards different gateways and different destinations. To that end, I have VLAN tagged the (only) Ethernet port and configured 5 VLANs on it. The first one has the default route (I manage this Mac over this VLAN). The other four have IP addresses in the test range I'm using.
The goal is to have traffic sourced from IP-address-X go out vlanX towards gateway-X. It's counterpart on the far end runs Linux and I have configured it in this way:
ip route add default via <gateway-X> dev ethX table X
ip rule add from <network-X> table X priority X
Researching on OpenBSD forums (since it's the base of MacOS X), provided this:
route -T X add 0.0.0.0/0 -iface <gateway-X>
echo pass in from <network-X> to 0.0.0.0/0 rtable X | pfctl -mf -
However, the Mountain Lion "route" command does not support the -T option, so that killed that idea. Another forum suggested that this would have worked on 10.4:
ipfw add X fwd <gateway-X> ip from <IP-address-X> to any
I tried this on 10.8 though the man page says it's deprecated, and (surprise, surprise) it did not work.
Any ideas to get this working appreciated!
Thanks,
AaronStill doesn't have it in 10.9.4.
irene:~ cschwartz$ sudo bash
bash-3.2# route -T add
route: illegal option -- T
usage: route [-dnqtv] command [[modifiers] args]
I'm guessing you want policy-based routing due to VLANs...? If you can get a USB-to-Ethernet adapter, then maybe you can work around this by using multiple physical links instead of VLAN tagging. But if you need source-based routing etc. then no. -
Vrf routes into global route table
Dear All
I am stuck with a design I am trying to come up with for our EDGE network and looking for ideas from the community.
It is similar to what is described here:
http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/ServEdge.html#wp86450http://www.cisco.com/en/US/docs/solutions/Enterprise/Network_Virtualization/ServEdge.html#wp86904
In short we have a multi-context FWSM at 2 sites creating an EDGE network, each site operate independently. The sites are linked internally in a single routing domain using OSPF. Each of the outside networks are in seperate VRFs, single-tier model.
I need to find a way to:
1) link the 2 sites (currently is done with a GRE tunnel between the site vrfs, looking at replacing this with mp-bgp and l3vpn encapsulation)
2) redistribute routes from each of the vrf into the common global route table (running ospf)
1 is working nicely with mp-BGP peer between the sites and routes distributed between, however I am stuck on how to achieve 2.
The only way I can see is to change the global route table to a vrf, then use rt import/export. This is commonly described as shared services. When I did that I got stuck with how to do the BGP peering as the loopback I was using for the peering is inside the new vrf.
Basically I want dynamic routing from the global route table to learn routes from each of the sites vrf. Then if a particular site's vrf is unavailable, it can pick up the other site's route.
Am I missing something here? The document linked makes it sound incredibly easy yet I am struggling with how to implement it.
Any advice is much appreciatedHello philip,
It is really hard to help you, if you do not provide topology where you would like to implement these changes, so just some thoughts to your points:
2) redistribute routes from each of the vrf into the common global route table (running ospf)
You can use PE - CE design. VRFs are terminated on PE with all routes you need in respective VRFs. On PE, MP-BGP routes are redistributed into respective VRF's OSPF process . PE is connected with CE via separate physical interface for each VRF or you can use one physical interface with dedicated sub-interface for each VRF. PE is peering with CE using OSPF. All routes end up in CE global routing table.
Problems with this design ->
- for each VRF you have to create separate OSPF process on PE and CE, also OSPF process ID has to be unique on PE for each VRF. Also OSPF process ID has to match to establish OSPF neighborship between PE-CE, so on CE you will have to redistribute OSPF routes from each process to your main OSPF process.
other workarounds ->
1) instead OSPF you will use as peering protocol BGP between PE-CE, but you still have to redistribute BGP routes to OSPF on CE
2) you will use different PE to redistribute each VRF -> BGP routes will be redistributed from VRF into OSPF (same process ID as your main OSPF ID). Routes will be advertised via OSPF into CE global routing table.
You will use on PE per VRF to redistribute routes into OSPF with same process ID as your main process ID. Thanks to different PEs, you can have same OSPF process ID, all these PEs will peer with same CE via OSPF.
I hope I made my thoughts understandable, cause its quite hard to explain
When I did that I got stuck with how to do the BGP peering as the loopback I was using for the peering is inside the new vrf.
This should not be a problem. You can have same IP on all VRF and also global table, so peering can still be done. After BGP routes are exchanged you can leak prefixes from one vrf to another or into global table as you need.
Best Regards
Please rate all helpful posts and close solved questions -
The growth of the internet routing table + LISP
I have been challenged with the task of putting together a 15-20 minute presentation of how I might go about solving the problem of the growth of the internet routing table.
If I am understanding the question correctly - as the internet grows so will the number of IPv4 and (moreso) IPv6 prefixes that appear in the global internet routing table. This will mean that the PE and P routers in a Service Provider network will find themselves having to deal with more prefixes that will in turn increase the possibility of bogons interferring with proper routing and increase the load on the routers themselves.
Besides being a very open ended question, I am trying to look at it from the perspective of a Service Provider (whom I work for) and have come up with the following options (admittedly this is only after a quick google on the topic):
> Improvise in the short term by adjusting CAM table allocation
> Use selective hearing by filtering prefixes that are not important
> Use external assistance like LISP and DNS
> Spend Money and upgrading existing routers to handle the load
Obviously with only a 20 minute window I cannot talk about much and I would like the options to be innnovative and interesting. LISP seems like an interesting option and I would like to learn about it - however I am having trouble tracking down resources that give a basic introduction to exactly what and how LISP works (every time I try and search for it a get pushed to sites talking about the programming language ).
So this leads me to two questions:
1. Is there anything important, vital or interesting that I have not included in my quickly put together list above.
2. Is anyone aware for a good site/resource that explains LISP from a beginners/tutorial-type perspective.I have been challenged with the task of putting together a 15-20 minute presentation of how I might go about solving the problem of the growth of the internet routing table.
If I am understanding the question correctly - as the internet grows so will the number of IPv4 and (moreso) IPv6 prefixes that appear in the global internet routing table. This will mean that the PE and P routers in a Service Provider network will find themselves having to deal with more prefixes that will in turn increase the possibility of bogons interferring with proper routing and increase the load on the routers themselves.
Besides being a very open ended question, I am trying to look at it from the perspective of a Service Provider (whom I work for) and have come up with the following options (admittedly this is only after a quick google on the topic):
> Improvise in the short term by adjusting CAM table allocation
> Use selective hearing by filtering prefixes that are not important
> Use external assistance like LISP and DNS
> Spend Money and upgrading existing routers to handle the load
Obviously with only a 20 minute window I cannot talk about much and I would like the options to be innnovative and interesting. LISP seems like an interesting option and I would like to learn about it - however I am having trouble tracking down resources that give a basic introduction to exactly what and how LISP works (every time I try and search for it a get pushed to sites talking about the programming language ).
So this leads me to two questions:
1. Is there anything important, vital or interesting that I have not included in my quickly put together list above.
2. Is anyone aware for a good site/resource that explains LISP from a beginners/tutorial-type perspective. -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
How do I create multiple TOC's (Tables of Contents) in one Pages document?
I'd like to have multiple TOC's (Tables of Contents) in one document. This is useful for me because I'd like to have a TOC for the regular chapters, then a TOC for the procedures, then a TOC for the tables in the document (it's a tech manual that I am writing). How can I do this? Thanks for any help you can render, and have a nice day!
fruhulda wrote:
If you haven't used a paragraph style it can't create a TOC but you get the blue box with the message.
Paragraph used.
It has nothing to do if there is one main TOC or several smaller TOC to do.
It isn't true that you can only have one TOC in a document. Use styles for your titles and headings. I do and it works fine without section breaks.
You also need to tick which tile and heading you want in the TOCs in the Document Inspector > TOC
Did that.
Thanks to Yvan's quoting from the User Guide, I see where it says each TOC only indexes the material up until the next TOC. Since I had them follow each other, that is why they had no content.
Still it defeats the objective of indexing different material throughout the document if all you get is what is between the TOCs.
Peter -
How to Display multiple records in Table in VC without using BAPI.
Hi All,
I am working on Visual composer (NW2004s SP10). I am trying to display Poitems from BAPI_PO_GETDETAIL. I am creating my front end using VC. I have created one form and one Table where I want to display POItems. I am writing my logic of retrieving data from BAPI in CAF.I am connecting them in Guided procedures.When I run my process in Guided Procedures I am getting single row displayed in table. Can Anyone help me how to display multiple rows in table.
Regards,
SheetalHi Sheetal,
if the BAPI returns a table, then you get multiple rows. From which system is the BAPI, so that I can check the BAPI to give you further information.
Best Regards,
marcel -
To delete multiple entries in table control in module pool
Hi,
Please help me out to know , <b>how to delete multiple entries from table control</b> when multiple lines in table control are selected.
Regards,
Irfan Hussainhai,
you can do it inthis way.
in the PAI event.
loop at <table control name>
module del_itab.
endloop.
in the nodule,write the folowing code.
if <tablecontrol>-fieldname = 'X'.
delete <tablecontrol-itab>
endif.
cheers -
How to count number of default routes in routing table
Is there a way for java to count the number of default routes in the routing table?
Hi Sathish,
If you are using table mean surely you are binding the table to some model like JSON model. You can bind the checked value of the column with the checkbox in the template. So while checking you can directly check the property by taking the reference from the model. Navigate through all the objects in the model and check the property you wanted.
This is the logic I have used to get the checked property form the table column. My table id is "tableId" and it is being binded with "/tableModelData" of json model.
var myModel = sap.ui.getCore().getElementById("tableId").getModel().getProperty("/tableModelData");
for(var i= 0 ; i< myModel.length ; i++)
var singleObject = myModel [i];
if(singleObject.checked == true){
your logic. -
VPN connection created with CMAK fails to update routing table on Windows 8.1 with error 8000ffff
When my clients connect their CMAK-created VPN, it fails to run the script to set their routing table with the following error:
Custom script (to update your routing table) failed (8000ffff)
My objective is to create a VPN connection with split tunneling - does not use the VPN connection as the client's default gateway.
All my clients are on Windows 8.1 64-bit, and are logged in with Administrative privileges
My VPN Clients are on 10.242.2.0/24, my internal network is on 10.172.16.0/24
I want only traffic for 10.172.16.0 to go via the VPN. Everything else should go via the client's internet connection
My Connection Manager Administration Kit profile, was created on Windows 2012 R2 CMAK with the following settings:
"Make this connection the client's default gateway" is UNticked on the IPv4 tab.
Define a routing table update is specified with a text file containing:
+++ Start of txt file +++
REMOVE_GATEWAY
add 10.172.16.0 mask 255.255.255.0 default metric default if default
+++ End of txt file +++
The txt file is saved in DOS/Windows format (not Unicode or UTF-8 which I've read causes problems)
I've tried everything in lower and upper case in the txt file after reading that the file might be case sensitive
The following appears on the client with logging enabled:
[cmdial32] 10:42:34
03 Pre-Init Event CallingProcess = C:\WINDOWS\system32\rasautou.exe
[cmdial32] 10:42:40
04 Pre-Connect Event ConnectionType = 1
[cmdial32] 10:42:40
06 Pre-Tunnel Event UserName = UserName Domain = DUNSetting = VPN (L2TP x64 NoGW) Tunnel DeviceName = TunnelAddress = vpn.mydomain.tld
[cmdial32] 10:42:43
07 Connect Event
[cmdial32] 10:42:43
09 Custom Action Exe ActionType = Connect Actions Description = (none) ActionPath = CMDL32.EXE. The program was launched successfully.
[cmdial32] 10:42:43
08 Custom Action Dll ActionType = Connect Actions Description = to update your routing table ActionPath = C:\Users\UserName\AppData\Roaming\Microsoft\Network\Connections\Cm\VPN64\CMROUTE.DLL ReturnValue
= 0x8000ffff
[cmdial32] 10:42:43
21 On-Error Event ErrorCode = -2147418113 ErrorSource = to update your routing table
[cmdial32] 10:42:43
13 Disconnect Event CallingProcess = C:\WINDOWS\system32\cmdial32.dll
Where can I find out what error codes 8000ffff or -2147418113 mean?That was it. Thanks, Steven
"By default, the dial-up entry and the VPN entry have Make this connection the default gateway selected.
Leave this default in place, and remove any gateways by using the REMOVE_GATEWAY command in the routing table update file itself."
It seems counter-intuitive to leave
Make this connection the default gateway selected, when I specifically don't want that behaviour, but leaving it selected and using REMOVE_GATEWAY works for me. -
VRF Best Practice: LAN only VRF, Mgmt VRF, Global Routing table or VRF?
I am setting up a routed LAN (not a WAN) environment on two 6500 switches (sup-720). My goal is to create 32 routed environments separated by logical firewalls (multi-context ASA's). So I want a âcoreâ router in each environment, and don't want to buy 32 pairs of 6500's-sorry Cisco.
Each of these environments are tied together by a core routing environment, running on the same pair of 6500's. No WAN MPLS is going on and I am trying to use VRF for each of the routed environments core router. The management functions of the 6500 shall run off the VRF Core router and ip range (the one that ties all the other VRF's together. Here is a simple diagram:
VRF1
||
FW1
||
VRFCOR
||
FW2
||
VRF2
So to go from VRF1 to VRF2, you traverse two firewalls and VRFCOR.
Several questions related to this design:
1) Am I nuts to use VRF's in this application?
2) Is there a better choice than VRF's to do what I want?
3) Should VRFCOR be the global routing table (IOW, not a VRF)? Or should be its own VRF? Another way to ask this is: Shall a router ever run entirely in VRF tables, or should there be at least one global table in use?
4) Are there problems with any management protocols on a VRF, such as NTP, AAA, SNMP, LOGGING, TELNET? Or have all those been worked out?
5) Any other suggestions?
TIA, WillVRF is suited for such kind of an application. Refer to URL http://cisco.com/application/pdf/en/us/guest/netsol/ns171/c649/ccmigration_09186a0080851cc6.pdf to get an idea about the
-
How to use "Routing Table" option in Proxy service in OSB ?
Hi,
I have created Business and Proxy services in my OSB console. I have used "Custom Query" option while creating the Database Adapter and I'm passing one input parameter to the query. My input parameter is "Name".
Based on the input values for this parameter, I need to pass a corresponding values to the query. For example, If I pass the following values to "Name" input parameter (India) I need to pass "Value1" to my query -
India --> Value1
China --> Value2
America --> Value3
To achieve this requirement, I have used "Routing Table" option. I have specified the values as follows -
Expression - $body/fet:FetchCustDataInput/fet:Name
Operator- '='
Compare value - India
Service - "My Webservice"
Operaton- "My Service Operation"
In the "Request Actions:" I have added the "Add an Action --> Messaging Processing --> Replace" and provided the following values -
Replace <XPath> = $body/fet:FetchCustDataInput/fet:Name
in Variable = "Name"
with Expression = xs:string('Value1')
and selected "Replace node contents" option.
No validation errors I faced. I have created the Routing table in Proxy service. But when I try to execute the proxy service in my Test Console, I get the following error message -
"The invocation resulted in an error: Unknown error while processing message for service ProxyService OSBQueryService/FetchByCustomQuery/FetchByCustomQueryPS."
I have even enabled "Direct call" and "Include Tracing" options as well. The message under "Tracing" give "(echoing request)
Routed Service. No Service has been invoked, the request is echoed.".
Can anyone please help me to resolve this issue.
Thanks in Advance,
UdayaDid you put any loggers in the proxy at request pipeline prior to route node ? Can you trace if the request has entered request pipeline aleast.
If not just check the transport headers under the request window in the test console. There should be a text box for entering username/password which should be left blank. I have faced this unknown exception from test console in some browsers where an incorrect username/password used to get populated here. Check this ..
Edited by: atheek1 on Jul 22, 2010 2:02 AM -
How to stop windows ipv6 route table auto-update
In ipv6 , windows xp can get one global ipv6-address. how to delete the address and del the route in route table persistent? And stop route table auto update?
The WsusContent folder is filled with 256 folders that are two-characters long (e.g. 00, 0A, 0B, etc), and each of those folders are filled with exe and cab files all with what appears to be a GUID as a filename.
Currently the C:\Program Files\Update Services\WsusContent folder is 27.5GB in size with 256 folders and 15,361 files.
Classifications are confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
Critical Updates
Definition Updates
Security Updates
Service Packs
Update Rollups
Updates
Product selection is confirmed matching exactly when viewed from either the WSUS console or the Software Update Point Component Properties on the CAS server:
Developer Tools (VS 2005 - 2013, etc)
Exchange 2007, 2010, 2013
Forefront Endpoint Protection 2010, TMG Definition Updates for HTTP Malware and NIS, TMG, TMG Firewall Client
BitLocker Admin
Lync 2010, Lync Server 2010 and 2013
System Center DPM 2006 and 2010
Office Dictionary updates, new dictionaires, XP, 2003, 2007, 2010, 2013
Silverlight
SQL Server 2012, 2000, 2005, 2008, 2008 R2, 2012, feature pack
System Center 2012 (all), 2012 R2 (all), 2012 SP1 (all)
Windows (all except EU browser choice and graphics drivers for 8.1 upgrade)
Admittedly we could update that list a bit, but it sounds like you don't think there should be any content downloading to the WsusContent folder at all? -
SMTP routing table does not seem to be working correctly.
Why isn't the SMTP routing table working properly?
<P>
First, make sure you have the routing table setup correctly.
Entries in the Routing table are in the following format:
<P>
<incoming recipient domain>:<route to this host>
<P>
For example, if you want all mail addressed to [email protected]
to be routed to mailhost1.realdomain.com, you would add the following
line to the SMTP routing table:
<P>
virtualdomain.com:mailhost1.realdomain.com
<P>
With the above option, any mail coming in addressed to <anyone>@virtualdomain.com
will be routed to mailhost1.realdomain.com. The recipient email
address will not be re-written, so mailhost1.realdomain.com needs to
accept mail addressed to the original address, @virtualdomain.com,
even though it is in realdomain.com.
<P>
Before adding, changing or deleting any SMTP routing table entries, double-check
with the DNS Administrator that the host names you specify are valid,
registered host names. If in doubt, you can use IP addresses for the
"route to" host, but not for the "incoming recipient domain".
<P>
Wild cards can be used in mail routing table options, but they indicate that a
hostname <B>will</B> fill that spot. For example:
<P>
*.domain.com:mailserver1.domain.com
<P>
In the above example, any mail addressed to <anyone>@<anyhost>.domain.com
will be routed to mailserver1.domain.com. However, mail addressed to
<anyone>@domain.com will not be routed. To fix this, add this
line:
<P>
domain.com:mailserver1.domain.com
<P>
<B>Note:</B> You cannot use the SMTP routing table to route all mail
addressed to a specific domain to a specific account. You would need to use
a "Mail Pool" account for this, which is only available in Messaging Server
3.5+.is this entry valid for routing table in nms v 4.15 p6
* : anotherhot.mydomain.com:5000
assuming that my anotherhost is listening and accepting on port 5000 for smtp connections. and i wanna forward all the mails to that host
regards
Prashant
Maybe you are looking for
-
Hello I have an Intel core Duo iMac 20'', everything has been OK until today that I can't hear music from CD's nor radio stations , etc. on iTunes anymore. Garageband and DVDs are OK, I can hear the sound track without problems. Any help?
-
I recently upgraded to Leopard and have had problems burning through idvd ever since. Idvd keeps quitting during the processing movie stage. I have tried repairing permissions and deleting the preference file with no success and have ensured I have 2
-
How to catch Delta Initialization and Delta Update in a Function Module
Hi Experts: I'm developing a FM to extract data from R3. I wonder if anybody knows how to catch when i'm making a delta initialization and a delta update in my FM, because i have different parameters and routines from each one. Thanks in advanced. Po
-
Guest portal using ACS to authenticate against AD
Running ACS 5.3, I have a Wireless Access policy that authenticates wireless users either by mac address, AD user name or computer name, depending on what AD groups the accounts belong to. My Network Authorization policy has rules because only certa
-
Image reduction (200px -- 100px) causes program error
"Could not complete the Image Size command because of a program error" is the error I get.. I've got a 200px .psd file (created with cs5.5 extended) and reducing it to 100px borks. Enlarging it worked though...