Multiple independent devices on Single installation with independent monthly rental charges

Hi Experts,
4 Independent single register based devices installed (Tech+ Billing) in a single installation with same time slice. There is only monthly rental charges for each independent meter. No meter reading required and NO consumption charges. I believe we can do this scenario. Can anybody advise for any consequences?
Note: number of devices can change from 2/3/4.

Hi,
How are you going to satisfy the meter read orders to make it billable without entering the meter reads? If you do not need any meter read, can't you use any flat rate / time dependent prices? The amount output will be same but you will not be using any settle* variant program. You may use any Lumsum* variant program. If you do not use the devices for entering meter read, do you have any requirement of installing the devices with the utility installation?
Thanks.
Nirmalya

Similar Messages

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

FROM THE PHONE DUMMY: What comes with the monthly phone charge. Internet? Email? Ect? Is there extra charges for these?

FROM THE PHONE DUMMY: What comes with the monthly phone charge. Internet? Email? Ect? Is there extra charges for these?

internet, email, sending/receiving pics, facebook, twitter, etc are using part of the basic 2 gig allowance for data.
many folks use wi-fi at home/work/any place with wi-fi & that isn't using any of the data.

Is there a way to add multiple borders to a single cell with one click or do I have to add one border at a time for example, one cell with borders on three sides?

I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click. At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color. Is there a way to select the top and bottom border of a cell in one click? Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.

Thank you for the suggestion but this did not work for my Mac. When a cell is selected for which I want borders, the entire cell is lit up. Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border. So selecting the style, thickness, and color first doesn't work.
If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time. After selecting one border, style, thickness, and color, said border is now on the spreadsheet. Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color. Yes, it is tedious.
The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
Does it have something to do with Allow or Disallow border selection?
I have Numbers '09 version 2.1 (436)

Multiple shapes on a single layer with different line-weights & colour fills

I'm just beginning with photoshop CS6 and I'm struggling with something in a project that should be simple
I need to draw a circle within a circle within a circle within a circle etc etc.
I need to give the circle lines different weights and colours and I need to change the colour of the fills between the lines.
Imagine if you will a diagram of the Earth's cross-section. That's roughly what I'm going for.
I don't want each circle on a different layer though, it would be way too hectic.
I can't figure out how to change the properties of one shape in the layer without changing all the others.
It's super frustrating.
Can anyone explain how to do this?
Thanks in advance.

A shape is a vector path that defines the shape. The fill of that shape fills the entire layer and the vector mask asks like a cutter so you only see what is inside that mask. Since a single layer can have only a single color what you ask can not be done.
What you can do, when you are satisifed with the circles is to merge the layers into a single layer, then that layer will consist of only pixels and can then have multiple colors defining it. But do that as your final step, as once it is done, it is more difficult to edit it.
What is better is to group the shape layers to hide them or convert them into a smart object. It will look like a single layer, but at any time in the future including after closing the file, you double click on the thumbnail of that layer and view the individual layers to edit them.
There will come a time when you wish you could easily change a color to stroke thickness, even a year layer. Thats where the shape layers really shine. As they are non-destructive.

Saving multiple scanned pages as single document with 8620

I need to scan multiple pages and save as a single document. I am scanning using the AiO remote app and my iPad Air. I see the "Add Pages" icon and use it, but when I save, it saves as individual documents. I need multiple pages to be a single document. Solutions?

Hi,
As mentioned above, I can't re-create the problem. You mentioned Add Page and this is it:
You simply touch Yes then touch Scan for next page .... and at the end Touch "No I'm done" then Save a PDF file or image file.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to display multiple components in a single tabstrip with different tabs

Hi Experts,
I am working on PM UI development. We have created 5 webdynpro components and all have seperate application and link to run. Now we have requirement in which we should have a single window and all components should exist in different tabs.
Till now I have used Tabstrip in a single copmponent and have no idea how to fix this issue. Could you please help me out to get this done ASAP.
Thanks in advance.
Madhu Omer

Hi Madhu,
One option that you can try now is to create a new webdnpro component with a tabstrip.
1. To each of the tab area you attach view container.
2. In the used components of webdynpro component tab you can add each of the components that you created
3. Create inboud plugs for each of these application that you created.
4. When the tab is pressed trigger a call to the inbound plug of the applications
5. You can refer the following also https://cw.sdn.sap.com/cw/docs/DOC-24752
All the Best !

Printing multiple pages on a single sheet with SAPScript

Hello,
I am using SAPScript on ECC 6.0. We currently have a form which occupies the top half of an A4 sheet of paper. The form is printed on pre-printed stationary provided by the government. The government has now issued a new version of the pre-printed stationary which allows a single page to contain the form twice. The form is a with-holding tax receipt that we issue to a vendor.
We now wish to use this stationary to print 2 different instances of the form to a single sheet. The different instances will be for different vendors and have different contents. The stationary is provided perforated so we can split them apart after printing.
Does anyone know how to make SAPScript print 2 instances of a form to a single sheet of paper using a laser printer?
Thanks in advance,
Ben

Hi Ben,
Use this control command in the sap script main window and split the main window into two parts. This will solve your problem. If you require further info please let me know.
/: NEW-WINDOW
Use of this command is as described below.
Each page can consist of up to 99 main windows. Each main window is assigned a consecutive identifying number (0..98), and the windows are filled in this order. This feature enables SAPscript to print labels and to output multi-column text. When one main window fills up, the next main window on that page is taken, if there is a next one. A page break is inserted after the last main window.
You can use the NEW-WINDOW command to call the next main window explicitly, even if the current main window is not yet full.
OR****************************************
You can call this script control command through your printprogram after filling your first instance of main window using function module CONTROL_FORM.
reward if helpful.
Thanks & Regards,
Kalyan.
Edited by: Kalyan on Jan 4, 2008 9:50 AM

Multiple UWL for the single user with different Role

Dear SAP Gurs,
We have one critical requirement on the Universal worklist, as a functional requirement like some Approvers will play different roles as approver, needs to track saperately the approver inboxes for the same person.
For Example :
Approver A - is an Purchase Exicutive(Role)
Approver B - Is an Purchase Manager(Role)
Every time Apporver A has to access his approval requests seperately ( Belongs to Approver A) and take action, as well Approver A has to see Approver B's actions items seperatly and take action.
currently we have 4 levels available and single person has to take action on based on the 4 different Approves(Role)
Is there any work around for the abobe requirement.
Thanks in advance,
Vinod
Edited by: Vinod Malagi on Jul 20, 2010 3:33 PM

Hi Karri,
The same requirement i want to tweak in by adding one more column in the UWL by enhancing the BOR.
i have try with below , can you please suggenst can be done by Virtual attributes.
Once data is comming in the UWL i will put 3 custome filters
We need to add a new column in UWL, which is present as a Table SWWORGTASK, in this we have to pass WI_ID and get ORG_OBJ populate it as a column in UWL.
Please suggent how can we impliment this ? do we needs to create virtual ttribute in the BOR from the same.
as we have reffered the below link, we are not able to implimant the same. Kindly suggest.
http://www.erpgenie.com/sap/abap/bor.htm
Thanks in advance
Vinod

Use multiple iTouch devices on single iTunes instance

I'm working with a school district and we'd like to install district created educational videos on approximately 200 iPod Touch devices. Can I use the same iTunes account to load videos on all 200 iPods? Thanks in advance.

Hello Clyde,
And welcome to Apple Discussions!
Yes you can. There is no limit to the number of iPods you can have synced with one iTunes account or iTunes library for that matter.
B-rock

Multiple rows in a single but with different column names

Hello All,
I have a table in which data is stored in the below displayed fashion.
TRANS_ID
Ty_1
    NU_1
38960
    BP
    5215153159
38960
   EM
    [email protected]
38960
   FX
    5115538033
38960
   HP
    4419965055
38960
For some weird purpose, I would have to display the same data in the below listed fashion
TRANS_ID
Ty_1
NU_1
Ty_2
NU_2
Ty_3
NU_3
Ty_4
NU_4
Ty_5
NU_5
38960
    BP
5215153159
   EM
[email protected]
   FX
5115538033
   HP
4419965055
If possible, Please guide me in the right direction.
Thanks

Hi Madhu,
One option that you can try now is to create a new webdnpro component with a tabstrip.
1. To each of the tab area you attach view container.
2. In the used components of webdynpro component tab you can add each of the components that you created
3. Create inboud plugs for each of these application that you created.
4. When the tab is pressed trigger a call to the inbound plug of the applications
5. You can refer the following also https://cw.sdn.sap.com/cw/docs/DOC-24752
All the Best !

Why I can not connect more than one device at a time with a monthly subscription?

Yesterday I bought a monthly subscription (https://store2.adobe.com/cfusion/store/html/index.cfm?store=OLS-ES&event=displayProduct&ca tegoryPath=/Applications/EdgeInspect) and I got the confirmation of the purchase but I recognize Google Chrome I have synchronized devices but then only see one at a time, not displayed on all at once, can you help me?
Thanks in advance.
Message was edited by: dpcani_marble

Good afternoon where should be logged? In Chrome I'm logged in adobe.creative.com and many times I restarted Chrome and still not working ...

Will there performance improvement over separate tables vs single table with multiple partitions?

Will there performance improvement over separate tables vs single table with multiple partitions? Is advisable to have separate tables than having a single big table with partitions? Can we expect same performance having single big table with partitions? What is the recommendation approach in HANA?

Suren,
first off a friendly reminder: SCN is a public forum and for you as an SAP employee there are multiple internal forums/communities/JAM groups available. You may want to consider this.
Concerning your question:
You didn't tell us what you want to do with your table or your set of tables.
As tables are not only storage units but usually bear semantics - read: if data is stored in one table it means something else than the same data in a different table - partitioned tables cannot simply be substituted by multiple tables.
Looked at it on a storage technology level, table partitions are practically the same as tables. Each partition has got its own delta store & can be loaded and displaced to/from memory independent from the others.
Generally speaking there shouldn't be too many performance differences between a partitioned table and multiple tables.
However, when dealing with partitioned tables, the additional step of determining the partition to work on is always required. If computing the result of the partitioning function takes a major share in your total runtime (which is unlikely) then partitioned tables could have a negative performance impact.
Having said this: as with all performance related questions, to get a conclusive answer you need to measure the times required for both alternatives.
- Lars

My family has multiple iOS devices, all with 1 Apple ID. With iCloud coming, should I create separate Apple IDs for each member of my family?

Hello,
Between my family, we have 2 iPhones, multiple computers, iPads, and an Apple TV ALL tied in to the same Apple ID (the one I created when I got my first device). With iCloud coming, I wanted to know if I need to create separate Apple IDs for each family member (for emails, contacts, calendars, etc.). For instance, I would like to share certain contacts and a calendar with only my wife, all media between all family members, and have home sharing so that I can play/stream content on my Apple TV. Will there be a way to have multiple and distinct me.com accounts and yet share the same Apple ID?
Apologies for being verbose — just wanted to give ample info/background.
Thanks,
Jay.

I happened to stop at the Apple store yesterday for a separate issue and had a discussion about iCloud. Seems like this is how iCloud works (also, there's another thread on this forum that explains it well).
Each member of the family can have their own iCloud ID, which will be used for Mail, Calendar, Contacts, Apps, Bookmarks, Media, Photos, etc. and having this content synced automatically with a Mac (computer). The iCloud IDs work in tandem with the associated Apple ID — so while you cannot have multiple Apple IDs, you can certainly have multiple iCloud IDs tagged with a certain Apple ID.
While all this makes sense from the iOS device standpoint, I'm unclear on how things will sync with a Mac computer, especially if the family uses a single iMac with multiple login IDs for various members. For instance, I currently have an iMac and iTunes content resides in my Public folder, which my wife can still access when she logs in with her login ID. I'm guessing that I'll be able to set up her iCloud ID using her login, set up my iCloud ID using my login, while both our iMac logins will retain the same Apple ID. This would take care of syncing Photos, Contacts, Calendars, etc.
Another (not sure if unique) problem I face is our Address Book — right now, we have one GIANT address book with different groups set up. Certain groups sync to her iPhone, while others to mine. Some contacts are common between both of us. I'm hoping that if she/I updates a common contact, then the change will be reflected in both our groups of contacts. I hope this makes sense — for instance, I update a contact named Joe, and he's on my group of contacts in my iPhone. Hope iCloud updates the master contact card for Joe on the iMac, which would then automatically trigger the update on my wife's group of contacts—that Joe also belongs to— leading to an update on her iOS device as well.
Apologies for the lengthy response..

HT5649 Our family has a shared computer with itune software. We have multiple apple devices and multiple itunes accounts. Can we share the computer and iTunes software to back up each apple device separately?

How do multiple users with multiple devices share one computer with iTunes software to back up multiple devices and individual iTune libraries?

Hi Goodguy147,
Welcome to the Support Communities!
The easiest way to have multiple users with multiple devices share a single computer is to create a User Account on your Windows PC for each person. Each person should also have a unique Apple ID. That will keep each individual's iTunes Library separate from the others and each individual can associate and backup several devices to their iTunes library.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
The article below is a troubleshooting article for Windows. I'm just quoting the section from it that explains how to create user accounts:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717?viewlocale=nl_nl
Follow the steps below to create a new user account in Windows Vista or Windows 7:
Choose Start > Control Panel.
Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
Select "Create a new account" and follow the instructions to set up the account.
Once you create the new account, choose Start > Log Off.
Log in to the new user account.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
I hope this information helps ....
- Judy

Multiple independent devices on Single installation with independent monthly rental charges

Similar Messages

Maybe you are looking for