Multiple index entries for single object.

Hi,
Can someone guide me whether coherence allows multiple keys to be inserted in an index for given record(value)? I mean I will insert a single 'value' in the cache and multiple keys for it in the index, and I should be able to search that 'value' using ANY one key (not the combination of keys). I mean the search should use the index and hence should be fast. (Similar to lucene where it will tokenize the specified text and add individual tokens to the index so that you can locate given document using any single token).
Bharat

Hi Bharat,
Hopefully I am understanding your question correctly.
Adding an index allows Coherence to correlate attributes of values stored in a cache to the corresponding keys in the cache which can result in an increase in the performance of keySet and entrySet methods. This mechanism does not give you an alternate key to use with the get method.
cheers,
-David

Similar Messages

  • Multiple webdynpro applications for single webdynnpro component

    I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
    Rgds,
    Praveen

    Hi Saravanan,
    I need to modify it from the portal end, not at the application level.
    I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
    Regards
    Shivas Bhan

  • How to use the index method for pathpoints object in illustrator through javascripts

    hii...
    am using Illustrator CS2 using javascripts...
    how to use the index method for pathpoints object in illustrator through javascripts..

    Hi, what are you trying to do with path points?
    CarlosCanto

  • PROBLEM  TRANSFERRING   MULTIPLE   DATA  ENTRIES    FOR  ONE KEY-FIELD.

    DEAR   EXPERTS ,
       I  HAVE  TRANSFERRED  DATA  FROM  THE  FINAL  INTERNAL  TABLE  OF  MY  ABAP REPORT (NOT ALV)  TO  CUSTOM  Z-TABLE  CREATED  IN  SE11.
    BUT  MY  PROBLEM  IS  :  I   COULD  NOT   TRANSFER  MULTIPLE   DATA  ENTRIES   FOR  A  PARTICULAR  FIELD.
    FOR  EXAMPLE :  IN  TABLE  EKKO  THERE  ARE   FOUR  EBELN-4900006375  AND  FOR  THAT  DIFFERENT  EBELP S  ARE
    PRESENT.  I  COULD  TRANSFER  ONLY  THE  FIRST  ENTRY ,  THAT  IS :  EBELN -  4900006375  AND   EBELP - 0010,
    AFTER  THAT  THE  ZTABLE  IS  NOT  GETTING  UPDATED  TO  EBELN-4900006375 FOR  EBELP - 0020  AND  SO ON.
    I  HAVE  TRIED  ALL  THE  '  MODIFY, INSERT,  UPDATE  '  STATEMENTS.  I  HAVE  USED  AT - USERCOMMAND - HIDE  AND  CHECKBOXES.
       PLEASE   SUGGEST   A   SAMPLE   CODE   FOR   THIS.
    Moderator message: please post again, but not in all upper case.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    Edited by: Thomas Zloch on Jun 19, 2011 10:05 PM

    There are actually 5 queries in this report now. From what I understand about a union query, I don't think it will work here because the data being returned in each of the queries is so different. I basically need to know how to make all the criteria for each individual to be displayed before proceeding to the next data set, which will include the same data as the first, but for the next employee, and so on. I need to basically create a repeating frame with each individual's respective data I guess, but every time I do, it tells me that it's referencing an invalid group.

  • Multiple contact persons for single vendor--LSMW

    Hi experts,
        i want to upload multiple contact persons for single vendor. using lsmw direct input method or recording method is it possible..if possible can u let me know the procedure.
    Thx in advance,
    Neelu

    Hi
    in our company v wil upload contact person details in Sales Data......
    so its not possible to upload more than one contact person for vendor....
    can u tell me wr u people wil enter the contact person details?
    Regards
    Smitha

  • Multiple storage locations for single material - ECC 6.0

    Hi
    Can anyone let me know, how one can map multiple storage loctions for single material?
    regards
    Sanjay

    hello,
    Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
    Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
    Nikhil

  • Multiple Materials on a single object

    I'm sure I'm missing something...but I'm finding it impossible to use multiple materials form the 3D toolkit on a single object unless I separate the material differences to separate objects....which I'm sure is crazy. But if I import an object with multiple materials, there seems to be no way to assign the toolkit materials separately. If I drag a toolkit material to one part of the object...the entire object turns into that material. It would seem it would be right if you dragged a toolkit material to the materials list of the object....but that won't work either. Anyone know what I am missing here?
    Thanks in advance for any help

    Right click on the object and select Tools -> Separate Meshes which will divide the object into it's component parts (i.e. parts that aren't part of the same polygonal mesh will be divided)
    From there, you can apply materials to them individually.
    To rejoin them (you don't have to) just select them all, then right click and select Tools -> Collapse Hierarchy.

  • How to find multiple transport requests for one object

    Hi all,
    Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution.
    I need to develop a report ,   which will takes a single Task number as input and gets the Request number from table E070.
    Based on that Request Number i will fetch remaining Task numbers under it.
    Then for all the Tasks Numbers, i am fetching their  objects by using table E071.
    I need to list out  whether any of these objects are in multiple Transport Requests. Once i got all the Transport Request numbers i need to release the Request based on their Transport Request sequence.
    I tried the following FM's , but not able to get the solution.
    SVRS_DISPLAY_VERSION_LIST
    SVRS_GET_VERSION_DIRECTORY_46
    SVRS_GATHER_REQUEST_FRAGS
    Thanks..

    Hello
    I have tried with below code
    DATA list_tab TYPE TABLE OF abaplist.
    SUBMIT RSWBO040 USING SELECTION-SET 'TEST'
                    EXPORTING LIST TO MEMORY
                   AND RETURN.
    CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
         listobject = list_tab
       EXCEPTIONS
         not_found  = 1
         OTHERS           = 2.
    IF sy-subrc = 0.
       CALL FUNCTION 'WRITE_LIST'
         TABLES
           listobject = list_tab.
    ENDIF.
    break-point.
    Submitting the program(RSWBO040) of SE03 transaction a will result in 'CNTL_ERROR' dump.
    Please try some other options
    Thanks

  • Multiple Delivery document for Single Inbound Delivery

    Dear Experts,
    My scenario is;
    I have 2 Purchase Orders.
    PO 1 -> 100 QTY
    PO 2 -> 150 QTY
    I have done partial GRN against PO 1. In confirmations tab the inbound delivery no is shown.
    Latter I want to do inbound delivery for the remaining qty of PO1 and PO2 in the same inbound delivery. But while trying to pull the POs delivery, 2 delivery document are generated. I need to do the inbound delivery in single delivery document.
    Kindly guide.
    Thanks & Regards
    Ranjit Simon John

    Can you clarify on that: error message "Please maintain Table T163L". I have maintained inbound delivery in confirmation tab.
    I just checked on table T100 but I cannot find such message, it could be that T163L is a variable which would make it a pretty generic message, but I would be interested in the message number.
    I have 2 message with T163 mention in the text which are:
    E
    VL
    664
    There is no entry for confirmation category & in T163D
    E
    VL
    665
    No delivery type assigned to confirmation category & (table T163D)
    Further you are saying you have already maintained an inbound delivery in the confirmation tab.
    Isn't this a kind of duplicate if you have already an IBD maintained and you want create another one?
    Looking at this message again, it starts for me to make sense then, because the customizing is about sequence , and you do not have an entry that you expect another IBD as a second activity in your confirmation sequence.

  • How to use multiple tape drive for single filesystem on single client.

    Hello All.
    I want to backup single filesystem with multiple tape drive.
    Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
    Backup client has a  single backup filesystem like /data1  directory with 4 LTO6 drives.
    /data1 directory doesn't have a sub-direcotry, just present a files.
    If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
    Please anybody answer the questions.
    Thanks advanced.

    See how to use multiple tape drive from single client when I want to backup single filesystem?

  • Multiple Excise Invoice for Single GRPO

    Hello All
    How do we create multiple excise invoices from a single GRPO document.
    Thanks
    Santhosh.K

    Hi
    As per the scenario you mentioned.
    You can't create multiple Excise Invoice against Single GRPO. And as per the law of excise also there is no way to do like this.
    Gate  Pass  made against delivery when some vendor send the item to the client. Time quantity and rate with the duties are mentioned in that.
    similarly when client received the material all the above should be there in the gate pass.
    Ashish Gupte

  • Back button doesn't work due to multiple history entries for the current page. How can I fix this problem?

    This problem started February 2015. I have noticed it mostly while searching ebay. When I hit the back button it did not work. I right clicked the back button and found at least 2 and sometimes up to a dozen duplicate history entries for the current page I am on, meaning I would have to click the back button a dozen times to get to the previous page. I am using Firefox 35.0.1 on a Vista computer. I have not found any fix for the problem after searching the internet for hours. I have seen similar issues with people using IE and some say the duplicate entries are caused by banner ads but still no one has provided a good answer or fix for the problem. Please help.

    I will leave further answers to users of ebay. Script or adblockers may ease the problem.
    * Try this add-on search [https://addons.mozilla.org/en-US/firefox/search/?q=blocker&platform=windows&appver=35.0&sort=users blocker] (Windows)

  • Multiple email addresses for single characteristics in Email Bursting

    Hello Experts,
    We have requirement of Bursting email to external sales representative with only their relevent data.
    We have used Bex Broadcaster with email Bursting as distribution type . But the problem is we have to send out
    email to multiple sales reps for a particular sales rep i.e for a particular Sales rep we have to maintain multiple
    email ids of sales rep and infoObj can have only 60 chars long. So I cannot put more than one email id.
    Is there any work around to overcome this difficulty.
    Also I could have use individula schedule but number of schedleis very high around 200.
    Thanks,

    I understand you issue and I dont think It can be solved in BW as they system is not expecting the users email address to be more that 60 chars,  however you could create a rule in outlook (or whatever mail application you use) to forward all emails containing this header to the other email addresses.   Thats my only idea

  • Multiple Work Center for single internal activity ?

    If more than one work center used for single internal activity how can work center be allocated  ?

    Hi Yogesh,
    I understand that, you have a project activity in which different groups of people are working and you want to plan costs for all these groups of employees under the same project activity.
    To achieve this, create different activity elements under that activity and assign specific WCs and Work duration to all these activity elements so that system will calculate aggregated costs and scheduling dates accordingly.
    Hope this helps

  • Multiple entries for single employee in salary posting document

    Hi All,
    Require your help badly in sorting out an issue.
    For a particular provision, for ex - Prov for LTA, it is observed that multiple entries appear in salary posting document for a single employee. It is the case for other provisions too like LTA, Gratuity for numerous employees.
    Account Number with Text                  Wage Type   Pers.No.       Credit Amount      Crcy
    14520      PROV FOR LTA-CY            9LTA LTA      700002         11,902.00             INR
    14520      PROV FOR LTA-CY            9LTA LTA      700002         12,984.00             INR
    14520      PROV FOR LTA-CY            9LTA LTA      700002           3,636.00             INR
    Could you pl help me identify the reason and sort out the same.
    Thanks
    Amitava

    Hi,<br>
    How have you configured the 9LTA's provision? Is it any standard functionality for PY-IN or custom?
    Good luck<br><br>
    Thanks,
    Amosha
    <br><br>"Known is a drop & unknown is an OCEAN!"

Maybe you are looking for

  • Create pdf-files trough prn-files in a windows service applicatio

    Hi, i have also the problem to create pdf-files from .prn-files. in normall windows aplication we ar using the distiller but we would like to create the pdf's by running our application as windows service. in this case it is not possible to use the d

  • My Itunes freezes when I attach my Ipod to my computer

    I have tried all the USB ports. I have a Dell computer which having read some of the other correspondence may be a cause but the Apple help line was no help!!! I left a request for more help and nothing. Help appreciated I have a Nano Ipod, Dell comp

  • Captivate TOC navigate visited slide only problem. Visited topic can not click when exit and open again the training.

    Hi, I have created the TOC and i want the learner just can click at the Topic they have visited. i have no problem at the first time viewing the training. The problem is i read half of the training, for example I have Topic 1 - Topic 5, I just read u

  • Blade Tool Problem

    I'm in the middle of a project on Final Cut Pro X, and all of a sudden my blade tool stopped working correctly. Instead of simply cutting clips in half, it is now chopping off the entire rest of the clip after the blade tool edit point. Is this just

  • Software Update trashed my mac

    After running Software Update most of my apps won't run anymore. It is identical to the thread: "many applications quitting unexpectedly" Posted: Nov 25, 2008 12:46 PM By LilyGrace The two problems are actually the same. And please don't tell me to "