Multiple install of Oracle on same server

Hi,
Is there any problem, including license, to create two users on the Linux Box, and install in two diferent directories, making two Oracle running at the same time? I will use an UPU license on this server.
Is it better to make two Table Spaces?
Thank you all.

Just make sure you do not conflict ports, and that environment variables if used do not conflict either

Similar Messages

  • Multiple instances of OBIEE11g in same server

    Hi Experts,
    I need some advice on Creating Multiple instances of OBIEE11g in same server.
    the following are the details
    i have got windows server R2, installed weblogic 10.3.6 with 64bit JDK, then oBIEE 11.1.1.6.0 software only install and configuration
    till here everything is up and running without any issue.
    now i want to set up second instance , need some clarifications on points mentioned below:-
    1. same home directory can be used (c:\Middleware in my case) for second instance.
    2. to start second time software only install shall i mention same c:\Middleware\Oracle_BI1 or shall i mention c:\Middleware\Oracle_B2
    3. do i need to mention Bifoundation_domain and weblogic (userid, portno) separately
    Awaiting your reply.
    Cheers,
    Ankit

    Hi,
    Once completed instance1 installation then try to another installance2 with custom port option.
    *1. same home directory can be used (c:\Middleware in my case) for second instance.*
    Yes
    *2. to start second time software only install shall i mention same c:\Middleware\Oracle_BI1 or shall i mention c:\Middleware\Oracle_B2*
    Ensure that you install each instance into a separate Middleware home on that computer.
    *3. do i need to mention Bifoundation_domain and weblogic (userid, portno) separately ?*
    No need,1st install WebLogic Server first and then perform a Software Only Install then try to do the Configuration Assistant multiple times (or once for each instance) to configure each instance in the same, or shared, Middleware home.
    for more, Refer section 2.2.3.2 - Installing Multiple, Standalone Oracle Business Intelligence Instances on a Single Computer - of the Oracle Fusion Middleware Installation Guide for Oracle Business Intelligence 11g Release 1 (11.1.1) E10539-02
    The link is here: http://docs.oracle.com/cd/E21764_01/bi.1111/e10539/c2_scenarios.htm#CHDDIDGE     
    If you need it, this note may also be useful.
    OBIEE 11g: What Is The Format Of The staticports.ini File To Specify The Ports (Doc ID 1224873.1)
    Thanks
    Deva
    Edited by: Devarasu R on Feb 15, 2013 1:27 PM

  • I want to run multiple instance of tomcat on same server-very Urgent

    HI all,
    I want to run multiple instance of tomcat on same server. I have created CATALINA_BASE directory and i put conf,logs,temp,webapps, and work directory. I have configured server.xml in different port. I have set the environment variables too. Though it didn't workout for me. Is there anything else i have to do for that. if so, Please assist me.
    I did all according to the tomcat 4.1running.txt
    Thanks in advance
    Ram.

    hi,
    http://www.linuxjournal.com/article/8561
    http://forum.java.sun.com/thread.jspa?threadID=515368&messageID=2458945Hit Google..
    http://www.google.com/search?q=how+to++run+multiple+instance+of+tomcat+on+same+server&client=netscape-pp&rls=com.netscape:en-US

  • Multiple wiki's on the same server

    Is it possible to have multiple wiki's on the same server. I do not mean having 2 wiki pages. however more like having 2 websites from the same server and each having their own wiki sites.
    From just a quick play with the possibility both sites still reference from the same place so both sites would see the same wiki pages.
    I was thinking of trying to use realms however the wiki info is not kept in the folder that is managed by realms

    This can be done, but it really depends on the load balancer you use.
    There is no recommendation from BusinessObjects and you might want to consult the load balancer vendor for instructions and support.
    Regards
    Caroline

  • How to install the oracle lite mobile server?

    hi,every one!
    I follow the wizard of the oracle lite mobile server,then
    pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
    tells me that "invalid server name",how can i do?
    somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

    Andy,
    It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
    Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
    TNX,
    Phil

  • Oracle on same server with other DB

    I'm trying to find a technical reason why it isn't good to have Oracle installed on the same server with SQL Server or some other DB Product. I've seen lots of people say, "Don't do it.", but I haven't seen a technical reason. If someone could point me to an FAQ or another source, I'd appreciate that as well.
    TIA
    VaAccess

    AFAIK, adpatch is not aware of how much memory a server has. The number of workers it recommends depends on a set formula - pl see
    How Does Adpatch Determine The Number Of Workers To Recommend? [ID 800024.1]     
    You are essentially wanting to a trade-off between performance and speed. You could specify 2 workers, but the upgrade will take an unacceptably long time. Allocating a large number of workers will affect performance on the other databases, as you have experienced. You will need to find a sweet spot somewhere in between that is acceptable to you. If you have additional hardware resources, one option is to move the non-EBS databases off this server. I do not think there is a magic bullet to solve your issues.
    HTH
    Srini

  • Running Multiple ODI Agents On The Same Server

    Is it possible to run multiple ODI Scheduler Agents simultaneously on the same Server?
    As we provide Work repository name in ODI params file and if we have different work repository
    and we want to run schedular agent on same server how can we point to the other work repository.
    Do we need to create another installation of ODI agent files on same server?
    Thanks
    Kashi

    Hey Kashi,
    You do not have to instal a separate Agent files again. All you need to do is to make sure that each set of agent has all the required parameter files which inclues, odiparams.bat , agentstart.bat and agentstop.bat(names may not be exactly same). Here is a website that gives you more details regarding creating multiple agents on same server
    http://www.business-intelligence-quotient.com/?tag=odi-agents
    regards,
    k

  • Installing second oracle on same host

    Hi All,
    We already have one Netweaver Installed with oracle as a database. Now want to install IDES server with independent Oracle Database on windows.
    Can any one guide me in installing second Oracle.
    Thanks in advance.
    Sharib

    Hi Sharib,
    Just make the different envoirnment as per the <SID>.
    For Example.
    SID = ABC
    Users:
    oraabc
    abcadm
    SAPServiceABC
    Instance Directory =D:\usr\sap\ABC
    ORACLE_HOME=D:\oracle\ABC\102_64
    SAPDATAHOME=D:\oracle\ABC\sapdata1, D:\oracle\ABC\sapdata<n>
    All other directories will be under D:\oracle\ABC
    set the ORACLE_HOME and ORACLE_SID in oraabc users environment settings
    SID = XYZ
    Users:
    oraxyz
    xyzadm
    SAPServiceXYZ
    Instance Directory =D:\usr\sap\XYZ
    ORACLE_HOME=D:\oracle\XYZ\102_64
    SAPDATAHOME=D:\oracle\XYZ\sapdata1, D:\oracle\XYZ\sapdata<n>
    All other directories will be under D:\oracle\XYZ
    set the ORACLE_HOME and ORACLE_SID in oraxyz users environment settings.
    In short make the same Directory structure and User environment with different SID.
    You can also keep the second instance on another drive, for example E:
    Its depend on available partitions and their free space.
    Regards.
    Rajesh Narkhede
    Edited by: Rajesh Narkhede on Apr 26, 2010 2:04 PM

  • Is it Posssible to install 10g &11g in same server(2003)?

    Hi frnds,
    Already we are having 10g database in Windows server 2003 Environment .It is running properly.
    Is it possible to install 11g server in the same server.
    ~will it be a problem?
    ~will it disturb the 10g ?
    ~ otherwise any configuration we need to change.
    Regards,
    Muthu

    Each Oracle install is self-contained. Oracle does this by using a top level directory (fiolder) for each install known as the ORACLE_HOME. Each Oracle Home includes all the required software so the various versions do not conflict.
    The major issue is to make sure the version you are installing is indeed certified on that operating system. (see http://tahiti.oracle.com, go to the version you want, and look for the Install guide on your OS family) If it is not listed in the install documentation, you will probably have either challenges or complete failure.
    But for the database, co-existance is not (generally) a problem.
    You should, however, use only one listener for the entire machine, and that listener should be the one at the highest version. The easy way of handling this is to turn off the older database AND listener (control panel) while installing the newer version.

  • Install ColdFusion 11 on same server as older versions

    I know its possible to install multiple versions of CF on the same server.
    However, is it possible to have multiple versions using IIS instead of the built-in CF web server?  If so, how do I set this up?
    Thanks in advance!

    Say you have three sites in IIS viz, Site1, Site2 and Site3. Try the following as an example:-
    Navigate to \ColdFusion11\cfusion\runtime\bin\ and launch wsconfig.exe. Select Site1 from the drop down list of IIS websites. Click OK
    Similarly, you can navigate to\ColdFusion8\runtime\bin\ and launch wsconfig.exe. Select Site2 from the drop down list of IIS websites. Click OK
    Navigate to \ColdFusion11\cfusion\runtime\bin\ and launch wsconfig.exe. Select Site3 from the drop down list of IIS websites. Click OK
    So now, you have Site1 and Site3 configured with ColdFusion 11 and Site2 configured with ColdFusion 8.
    Hope this helps
    Regards,
    Anit Kumar

  • Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

    Hi All,
    I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
    lessage. But When I try to install SharePoint 2013. I am getting the following error:
    trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
    I am unable to find solution for this issue. what is the solution for this?
    Thanks in Advance..
    Prem Kumar

    To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to make Adobe acrobat feature to convert SAP  Pages to PDF available for multiple users connected to the same server

    We have installed Adobe Acrobat X Pro- English,Francais,Deutsch version 10.1.9 in our test environment and tried  testing it for converting SAP pages into PDF with a few pilot users. In doing so we faced a challenge, where only one user at a time can use Adobe Acrobat PRO to convert SAP pages in to PDF.As long as the first user who  is connected to Adobe Acrobat Pro via SAP isn’t logged off, other users connected to the same  server  are not being able to get the “Save As” dialog box to save the PDF in their preferred location.
    This is a business requirement and we need an urgent solution for the same. Can anyone help us in telling us if this is possible and if yes the how to go about?

    It's not something we deal with here, the LiveCycle products are a different world. Key points: Adobe LiveCycle is a range of products, some desktop, some server. LiveCycle PDF Generator is the one you should look at, it comes in 3 editions. License terms are by negotiation. Key management is via its Java API.

  • Multiple users connected to the same server

    Hi there,
    I was wondering if this scenario would be possible to be implemented on a Snow Leopard Server installed on Mac Mini 2.66:
    - one iphone developer that needs to be remotely connected to the server to develop apps
    - one project manager that will handle the project files and documentation. He will login to the server and upload/download files
    - one app GUI designer that will login from time to time, to make the design in photoshop.
    Can these 3 users be logged in the same time on the same server without any lag? Or this version of server will only support one user at a time?
    Thank you!

    Yes, you can do ssh and terminal connections, but I'm guessing that's not what you want here; I'm guessing you're headed over from X Windows or (more likely) Windows Terminal Services.
    Google for Aqua Connect and related for the path that you're headed toward.
    In general, Apple Mac OS X and Mac OS X Server runs one seat and one keyboard and one display per station, whether it's an Xserve server or a MacBook or whatever.

  • Problem with multiple Toplink/JPA apps in same server

    Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
    We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.

    Yes, they access the same datasource and most of the tables overlap.
    We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
    I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
    For the moment we're getting arround the problem with multiple OC4J instances in the server.

  • Running Multiple Web Dispatchers On The Same Server

    Is it possible to run multiple instances of Web Dispatcher on the same server?  I want to have one instance pointing to my WAS 6.40 system and the other instance pointing to my BW system.  I have set up two services on the NT server:  One named the standard sapwebdisp.exe and the other named sapwebdispbw.exe.  I am using two separate profile files, one for each instance.  The services start O.K.  However, when I attempt to access my BW system using the HTTP port as defined in the BW profile and the Web Dispatcher profile, I get a message back saying that "The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server."  I have double checked that the service is running and that the BW system is up and available.
    Any help is appreciated.
    Regards,
    Doug

    Hey guys,
    it seems you are web dispatcher specialists
    I have problems connecting even one server
    I would like to add an Enterprise portal (DEP) to the web dispatcher.
    My config file :
    SAPSYSTEMNAME = SDM
    SAPGLOBALHOST = webdispatch
    SAPSYSTEM = 00
    INSTANCE_NAME = W00
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
    DIR_EXECUTABLE = $(DIR_CT_RUN)
    Accesssability of Message Server
    rdisp/mshost = 172.20.40.6
    ms/http_port = 8101
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120, EXTBIND=1, TIMEOUT=120, PROCTIMEOUT=120
    Is it possible for you to paste your config file here ? 
    With explanation what the portal name is en waht the web dispatcher name is ?
    The error I get :
    no valid destination server available for '!ALL' rc=7
    Where can I adjust this !ALL and !J2EE group ?
    Where can I manage the /link/ ? (like /irj/portal)
    If you need any info please let me know.
    THank you for your time & help
    BUD

Maybe you are looking for