Multiple installations from one Yosemite download

Hi,
I am trying to install Yosemite on various computers, where does The installer go after the first installation. I don't want to keep waiting 45 minutes for each re download
Thanks
Enio

After the first installation it is automatically erased. You can re-download it from your Purchases page in the App Store. If you wish to keep the installer then before you click on the Install button put a copy in your Downloads folder.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive. Wait for the process to complete which will take quite some time.
You can also do this as follows:
Create Yosemite USB flash drive Installer
Open the Terminal in the Utilities folder. Copy and paste the following command line in its entirety into the Terminal window.
sudo /Applications/Install\ OS\ X\ Yosemite\ Developer\ Preview.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Yosemite\ Developer\ Preview.app --nointeraction
Press RETURN, enter admin password (will not echo to the window) then press RETURN again.
You need to have the installer in your Applications folder or change the paths in the above command line.

Similar Messages

  • Run multiple apps from one browser windows with 9ias r2

    We are running 9ias r1 with forms 6i as our production server. Users are able to access one html page with multiple links to their applications. They can run one application, keep it running, navigate back to the html page and run a second application.
    We are testing 9ias r2 with forms 9i, but when users try to navigate back to the html page to run the second application the first application closes.
    Is there a way to have 9ias r2 work the same as r1 and allow users to run multiple application from one html page?

    Hi,
    Thank you for posting in Windows Server Forum.
    You can take rdp of server 2012 R2 from Fedora Linux desktop by running Yum command or Gnome rdp support. Please check below article for information.
    1.  How to Use Remote Desktop (rdesktop) in Redhat/Fedora/CentOS
    2.  Remote desktop from Linux to windows using rdesktop and gnome-rdp
    3.  XRDP Installation: An Easy Remote Desktop Setup for Linux
    Note:
    Microsoft is providing this information as a convenience to you.
    The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • To Move Multiple Files from one directory to another.

    Hi,
    I need to move multiple files from one directory in UNIX (application server ) to another. I need something like an FM 'STRALAN_COPY_FILES' which is also valid in ECC 6.0.
    Thanks in advance.

    Hello Sachin
    Below you see a copy of how to use EPS_FTP_PUT using transaction SE37.
    Import parameters               Value             
    RFC_DESTINATION =                 NONE              
    LOCAL_FILE             =         filename          
    LOCAL_DIRECTORY   =              /dir1/dir2        
    REMOTE_FILE             =        filename          
    REMOTE_DIRECTORY   =             /dir1             
    OVERWRITE_MODE        =          F        " force -> overwrite existing file                 
    TEXT_MODE                    =   B               " binary
    TRANSMISSION_MONITOR            X       " display transmission monitor            
    *RECORDS_PER_TRANSFER            10                
    *REQUESTED_FILE_SIZE             0                 
    *MONITOR_TITLE                                     
    *MONITOR_TEXT1                                     
    *MONITOR_TEXT2                                     
    *PROGRESS_TEXT                                     
    *OBJECT_NAME  
    Regards,
      Uwe

  • Moving multiple queries from one category to another in QM

    Hi All,
    Is there is any way of moving multiple queries from one category to another in the query manager?
    Or is the only way of doing it by saving each one individually into a different category.
    Any ideas ?
    Regards,
    Rakesh N

    Hi Rakesh,
    The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
    Thanks,
    Gordon

  • Add to Multiple Tables from One Page

    Hello,
    I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
    ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
         Error      Unable to process row of table IDD_ID_DATA.
    So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
    So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
    I am new to APEX so any help would be greatly appreciated!

    UPDATE:
    I received an email from the APEX Support Team:
    "The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
    In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
    I have been playing around with PL/SQL code and the end result is this:
    begin
         INSERT INTO table1
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
         INSERT INTO table2
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
    end;
    I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

  • Scenario of multiple Asset from one AUC/WBS

    Hello,
    I am having a requirement, where I need to create multiple Asset from one WBS. I checked in the system and able to create more then 1 Asset for WBS.Also if I maintain the distrubution rules for those Asset then settle it accordingly to different Assets.
    I just wanted to confirm, will it we the right way of handling this scenario? My main concern is this involves intervention of user for maintaing the settlement rule during final settlement.
    Is there any other way to handle this scenario?
    Thanks
    Sarang

    Hello Virendra,
    I am not using Investment Managemnt. What do you mean by IM profile?
    I understand that I need to maintain the source of cost in Source structure. But even in that scenario the user has to go and maintain settlement rules and create multiple Asset against one WBS.
    So how do I tackle it, if client requirement is such that they want to create only one AUC, but during final Asset creation they want to create multiple Assets from one AUC. They dont want to have WBS for each Asset.
    Thanks
    Sarang

  • Creating multiple links from one map image in Flash CS4

    I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

    If I was to answer the problem, I would be giving you what you asked not to be given... the solution.  So I'll suggest that you start by researching the getURL() function.  That is what AS2 uses for opening web pages.
    As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
    http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
    Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering.  In general, if you type in the right keywords, you get fairly good search results.  In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

  • Passing Multiple rows from one external webpart list to another

    Hi Folks,
                    I have almost spent 1 week looking into this without any success. I have an external list "List A"  (in a webpart) with one of the columns as "State".
    Another external list "List B"  (in a webpart ) has state and user as columns. In some case I want to pass 1 state and in another I want to pass multiple state.  Passing one state from List A to List B works fine. But Multiple state does
    not work because the webpart list has the property "Send First row to connected web parts when page loads".  If I disable this option then the web part does not pass anything. Is there a way to pass multiple rows from one Webpart
    external list to other?

    http://www.sharepointanalysthq.com/2010/07/bcs-external-list-limitations/
    No Lookups
    Unfortunatly the only thing that you can do a look up on in an external list is on the ID column, anything else and you are out of luck.
    http://social.technet.microsoft.com/Forums/en-US/615771a0-ba78-4e38-9e2d-ded0204173ba/external-list-referenced-as-sharepoint-lookup?forum=sharepointgeneralprevious
    Try below webpart. it should help
    http://www.sparqube.com/SharePoint-Lookup-Column/
    If this helped you resolve your issue, please mark it Answered

  • Lightbox -- Multiple photos from one thumbnail?

    What I want to do is create a lightbox that launches a set of multiple photos from one thumbnail. Is this possible? All I have been able to do is create a lightbox that display's all of it's contents as thumbnails on my page. I am creating a portfolio page and I want each project's images to launch from one thumbnail. All of the projects would then be able to appear on one page. The work-around of course would be to make a separate page for each project, and make a lightbox within each one of these pages. Any solutions for this? Thanks!

    You can achive this by combining the Composition Lightbox Widget with the Slideshow Widget.
    01. Add Lightbox Display widget from the Composition section in the Widget Library
    02. For each small grey box (the Trigger) add your thumbnail
    03. In the larger grey box (the Target) add your Slideshow Widget (anyone you'd like from the Widget Library)
    04. Replace images with the images you want for your slideshow
    05. Preview

  • How do you select/move multiple clips from one timeline to another?

    Has to do with combining multiple edls from Avid - required due to an issue with duplicate reel names in the original Arri footage. I can move them one at a time, but it is very tedious. Is there a way to select multiple clips and move them together?

    Actually discovered the magic of the shift key.
    IRCP Beauty doesn't recognize multiple timelines in a session, so first you have to at least get the footage on multiple tracks in the same timeline. Shift + drag on the track will allow you to move it to another timeline. Also Shift + drag on the center of the first clip in a sequence will slide the entire sequence down - which is how timelines end up getthing offset all the time. Also, if there are multiple tracks in a timeline and some are locked and some aren't, Shift + drag on a clip will slide ALL UNLOCKED tracks in the timeline.
    Finally, Shift + click on either in or out marker moves both points up or down the timeline.

  • Managing multiple iPods from one computer

    The existing posts re: managing multiple iPods/iTunes accounts from one computer don't seem to address my question. I have been sharing my iPod with the family, and want to get my son his own for his birthday. Can I manage both iPods from the same computer? Does the iTunes software have the ability to "recognize" which iPod unit is attached? I'm dying to get his music out of my iPod ...

    Can I manage both iPods from the same computer?
    Yes.
    I'm dying to get his music out of my iPod ...
    Create new playlist and put the music you want in it.
    Open iTunes prefs -> iPod and select Automatically update only selected playlists and pick this new playlist.

  • How do I select multiple messages from one sender in mobile email to delete them all at once?

    I know how to select all of the new messages and mark as read. Now how would I do that if I wished to delete all from one sender or have the same subject, after I search the sender or subject?

    Hey Koyster,
    Great question. Utilizing iCloud.com, we may be able to purge these emails in a much faster way:
    iCloud: Delete email
    http://support.apple.com/kb/PH2651
    Delete messages
    - On your Mac, Shift-click to select multiple adjacent messages or Command-click to select multiple nonadjacent messages.
    - On your Windows computer, Shift-click to select multiple adjacent messages or Control-click to select multiple nonadjacent messages.
    Thanks,
    Matt M.

  • Is there an easy way to move multiple icons from one screen to another?

    I have multiple screens on my iphone 5c display.  I want to move multiple icons at the same time from one screen to another.  Is there a way to do this?

    You could put them all in a single folder and move the folder to another screen.

  • Manually copy a Quicktime installation from one Mac to another?

    We have an office full of computers with a very specific setup that includes Quicktime 7.1.3. And no, I cannot upgrade to the newer versions of Quicktime due to various technical issues that have arose during our testing. I'm setting up a new Mac station but have discovered that Apple removed all links for Quicktime 7.1.3. So i'm curious if i'd be able to manually copy/paste all the relevant quicktime files from one Mac to another (same specs on both). Would that work? Anybody have a list of files that Quicktime installs?

    See if this will work (I've never tried it):
    HD>Library>Receipts
    Check to see if you have a QuickTime or QT7.1.3 pkg file. If so, click on same. See if it will re-install QT.
    If the above works, then you will have no need to transfer QT from one Mac to another.
    I wonder if you can transfer just the .pkg files? Hmmmmm.............

  • Generating multiple rows from one physical row

    I was wondering if anyone has done or knows how to generate multiple rows for one physical row. In my query "SELECT Cust_No, Amount from Balances" if the amount is > 99,999.99 I want 2 rows returned, one with an amount of 90,000.00 and the other with an amount of 9,999.99. I'm thinking I need to use a view or function to return a result set but I'm not sure how.
    Thanks in advance,
    Allen Davis
    [email protected]

    James,
    Well your right in that you need a function, but also 3 views to accomplish that. I just wrote up the sql below and tested it. Basically you want the first view to return all records less than your cap of 99,999, thoes that exceed that will always return as 90,000 (see example on record PK 774177177). The second view returns money that remains AFTER the cap (in your case 9,999). The second view though also has to excude the ones less than the CAP.
    DATA and TABLE layout
    1) Table is called T1, columns are PK : primary key value, and N2 : some number column holding the MONEY amount
    2) data is below fromtable called t1 (10 records) ...
    select pk,n2 from t1 order by pk
    PK     N2
    117165529     100
    274000876     200000
    350682010     9999
    737652242     90000
    774177177     99999
    1369893126     1000
    1663704428     100000
    1720465556     8888
    1793125955     0
    1972069382     1000000
    Now see the records with money at 99,999 (just like in your example). You want 2 records, so the VIEWS now come into play. The view itself CALLS the function, this occurs when you select from the view. The function will either return 90,000 (your defined cap) or the remained after subtracting the money from 90,000. The 3 views are defined below (the FUNCTION which is shown after will have to be compiled first) ...
    --[VIEWS START]
    CREATE OR REPLACE VIEW VIEW1
    (PK,SHOW_MONEY)
    AS SELECT PK,FN_TRIM_MONEY(N2,1) FROM T1;
    CREATE OR REPLACE VIEW VIEW2
    (PK,SHOW_MONEY)
    AS SELECT PK,FN_TRIM_MONEY(N2,2) FROM T1 WHERE N2 >= 99999;
    CREATE OR REPLACE VIEW VIEW_ALL
    (PK,SHOW_MONEY)
    AS
    SELECT * FROM VIEW1
    UNION ALL
    SELECT * FROM VIEW2;
    --[VIEWS END]
    OK now for the actual function ...
    --[FUNCTION START]
    CREATE OR REPLACE FUNCTION
    FN_TRIM_MONEY
    PI_MONEY NUMBER,
    PI_VIEW_ID NUMBER
    RETURN NUMBER AS
    LS_TEMP VARCHAR2(2000);
    LI_TEMP NUMBER;
    LD_TEMP DATE;
    LI_CON_MONEY_MAX CONSTANT NUMBER := 90000;
    LS_RETURN VARCHAR2(2000);
    BEGIN
    IF (PI_MONEY > LI_CON_MONEY_MAX) THEN
    IF PI_VIEW_ID = 1 THEN
    LI_TEMP := LI_CON_MONEY_MAX;
    ELSIF PI_VIEW_ID = 2 THEN
    LI_TEMP := (PI_MONEY - LI_CON_MONEY_MAX);
    END IF;
    ELSE
    LI_TEMP := PI_MONEY;
    END IF;
    IF LI_TEMP < 0 THEN
    LI_TEMP := 0;
    END IF;
    LS_RETURN := LI_TEMP;
    RETURN LS_RETURN;
    END;
    SHOW ERRORS;
    --[FUNCTION END]
    I compiled the function and views with no errors. This is what I get when I query the 3 views ...
    --[VIEW 1]
    PK     SHOW_MONEY
    117165529     100
    274000876     90000
    350682010     9999
    737652242     90000
    774177177     90000
    1369893126     1000
    1663704428     90000
    1720465556     8888
    1793125955     0
    1972069382     90000
    --[VIEW 2]
    PK     SHOW_MONEY
    274000876     110000
    774177177     9999
    1663704428     10000
    1972069382     910000
    --[VIEW ALL]
    PK     SHOW_MONEY
    117165529     100
    274000876     90000
    274000876     110000
    350682010     9999
    737652242     90000
    774177177     90000
    774177177     9999
    1369893126     1000
    1663704428     90000
    1663704428     10000
    1720465556     8888
    1793125955     0
    1972069382     90000
    1972069382     910000
    So notice the PK entry 774177177 listed twice, once with 90,000 and other with 9,999. Also notice we now have 14 records from the original 10, meaning 4 records qualified for the split (all data from VIEW 2).
    This is why Oracle kicks ass, views and functions are very powerful when used together and can return pretty much anything.
    Thanks,
    Tyler D.
    [email protected]

Maybe you are looking for