Multiple instances of Apache
We have to default setup. I would like to know if it is possible to run another instanace of Apache (on another port on the same system). Can this be monitored with Server Admin ?
You want a whole different instance of Apache? or you want apache to listen on multiple ports?
Both can be achieved, but there's usually little value in running a second instance unless you want to run two different versions for some reason (e.g. apache 1.3 and 2.1).
On the other hand, a single apache server can listen on multiple ports and serve different content depending on the port number the connection comes in on. This is a common way of implementing virtual hosts and has the advantage that all the common code can be shared, reducing the memory and CPU overhead.
If you do want to run two copies, you can do - you'll have to download the apache source and build a custom version that uses a different configuration file and directory layout. You'll also need to write your own startup script, and Server Admin won't have any visibility or knowledge about the second instance. In other words, you're on your own
Similar Messages
-
Multiple instances and Apache 2.2
I went thru the below livedoc to create multiple instances
and then associate them with apache config..
http://tinyurl.com/yzjpsl
But the instances are all started but I have two problems.
1. I cant find the CF administrator for all the sites
2. I can go to each instance administrator page but not the
main one and also apache does not resolve the VHosts.
Thus if I type in the full domain for one of the instance
sites then I get the page not found..
SO assume my problem is with apache config since the instance
sites are started and I can access them on the LAN.
This is my changes I made to the config of apache..
# JRun Settings
LoadModule jrun_module
"C:/JRun4/lib/wsconfig/1/mod_jrun22.so"
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ssl false
JRunConfig Ignoresuffixmap false
#JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/1/jrunserver.store"
#JRunConfig Bootstrap 127.0.0.1:51020
#JRunConfig Errorurl <optionally redirect to this URL on
errors>
#JRunConfig ProxyRetryInterval 600
#JRunConfig ConnectTimeout 15
#JRunConfig RecvTimeout 300
#JRunConfig SendTimeout 15
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr
.cfswf
</IfModule>
# Use name-based virtual hosting.
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/nathess"
ServerName www.nathess.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/1/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51000
</IfModule>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/mgel"
ServerName www.mariannegel.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/MGel/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51002
</IfModule>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/destinationcdg"
ServerName www.destinationcdg.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/DestinationCDG/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51003
</IfModule>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/mls"
ServerName www.multilingit.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/MLS/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51004
</IfModule>
</VirtualHost>I went thru the below livedoc to create multiple instances
and then associate them with apache config..
http://tinyurl.com/yzjpsl
But the instances are all started but I have two problems.
1. I cant find the CF administrator for all the sites
2. I can go to each instance administrator page but not the
main one and also apache does not resolve the VHosts.
Thus if I type in the full domain for one of the instance
sites then I get the page not found..
SO assume my problem is with apache config since the instance
sites are started and I can access them on the LAN.
This is my changes I made to the config of apache..
# JRun Settings
LoadModule jrun_module
"C:/JRun4/lib/wsconfig/1/mod_jrun22.so"
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ssl false
JRunConfig Ignoresuffixmap false
#JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/1/jrunserver.store"
#JRunConfig Bootstrap 127.0.0.1:51020
#JRunConfig Errorurl <optionally redirect to this URL on
errors>
#JRunConfig ProxyRetryInterval 600
#JRunConfig ConnectTimeout 15
#JRunConfig RecvTimeout 300
#JRunConfig SendTimeout 15
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr
.cfswf
</IfModule>
# Use name-based virtual hosting.
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/nathess"
ServerName www.nathess.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/1/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51000
</IfModule>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/mgel"
ServerName www.mariannegel.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/MGel/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51002
</IfModule>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/destinationcdg"
ServerName www.destinationcdg.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/DestinationCDG/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51003
</IfModule>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "E:/Apache2/htdocs/mls"
ServerName www.multilingit.com
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Serverstore
"C:/JRun4/lib/wsconfig/MLS/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51004
</IfModule>
</VirtualHost> -
I am trying to setup multiple instances on my CF box with
apache 2.2.3.
OS is W2003.
I followed the below doc
http://livedocs.macromedia.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/common/html/wwhelp.htm ?context=ColdFusion_Documentation&file=00001773.htm
But the problem with this is the when I created the
directories for each VHost in wsconfig/. Then the apache log would
report that the jrunserver.store is not present. As stated in the
doc this folder u create for each VHost should be empty..So I
copied the two files (jrunserver.store and mod_jrun22.so)from the
first web connector site that does not have a instance on CF into
each directory but still no luck..
So this above doc from Adobe definitely does not work, so
does anyone know how to accomplish this with apache 2.2.3 and CFMX
7.02???
Secondly if I create an instance for every site then how do I
connect to the original administrator page to delete instances or
edit them??Firstly, don't use the wsconfig application that ships with
jrun. Do the whole thing by hand
These instructions should work for you.
1. mod_jrun22.so is an apache module. As such it can be in
any location you like. I recommend that you put it with all your
other apache modules in the /%APACHE_HOME%/modules/ folder
2. in your httpd.conf file, make sure that you add the
following line (put it with all the other LoadModule directives):
LoadModule jrun_module /mod_jrun22.so
3. Now, find a VirtualHost that you want to point at one of
your instances. Inside it, put the following directive:
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ssl false
JRunConfig Ignoresuffixmap true
JRunConfig Serverstore
"%JRUN_HOME%/lib/wsconfig/[UNIQUE_NUMBER]/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:[JRUN_PORT]
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc
</IfModule>
3. make sure that the jrunserver.store (blank file) exists in
the specified folder. For the JRUN_PORT, use the port specified in
the port attribute of the <service
class="jrun.servlet.jrpp.JRunProxyService" name="ProxyService">
node in the %JRUN_HOME%\servers\[INSTANCE_NAME]\SERVER-INF\jrun.xml
file.
You will go mad if you try to use the wsconfig tools
supplied, if you take some time to understand all the config files,
then you will save time (and be able to do more complex installs)
in the end -
How to configure multiple instances in CF9
I'm having a few issues with a couple of our staging servers that are running multiple instances of CF9, and I'm not sure if they're set up correctly. I have CF9 Enterprise multiserver installed and I created 4 additional instances using the Instance Manager. I also created a specific jvm for each one to use and reregistered each service to use the custom jvm. In Apache I added the following to each vhost (changing the serverstore and port):
<IfModule mod_jrun22.c>
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/muffin/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51000
</IfModule>
However, when the service is stopped for one of the sites, instead of getting the JRun 500 error it will instead return a CF error or the site will still come up. But if I stop the main CF server service it will kill all the sites.
So it seems that all the instances are still tied to the main service. Is there something I'm missing here or something that wasn't configured correctly?
I used this guide when setting it all up. http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc4 .html
Thanks for any help.Thanks again for the help, I think we're getting closer
So I added all the instances to the wsconfig.properties file and they all show up when I run the wsconfig.exe.
#JRun/ColdFusion MX Web Server Configuration File
#Mon Mar 01 13:30:00 PST 2010
1=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
1.srv=cfusion,"cfusion"
1.cfmx=true,<null>
2=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
2.srv=cf2,"cf2"
2.cfmx=true,<null>
3=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
3.srv=cf3,"cf3"
3.cfmx=true,<null>
4=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
4.srv=cf4,"cf4"
4.cfmx=true,<null>
5=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
5.srv=cf5,"cf5"
5.cfmx=true,<null>
I also did this for each instance....since they were set to true.
Open the jrun_root/servers/servername/SERVER-INF/jrun.xml file for each server instance and locate the ProxyService service. Ensure that the deactivated element is set to false
But lets say I kill the service for cf2 and/or stop it in CF Admin from the Instance Manager, the site still stays up...
Here's a sample of my Apache configs.
httpd.conf
# JRun Settings
LoadModule jrun_module "C:/JRun4/lib/wsconfig/1/mod_jrun22.so"
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ignoresuffixmap false
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/1/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51020
#JRunConfig Errorurl url <optionally redirect to this URL on errors>
#JRunConfig ProxyRetryInterval 600 <number of seconds to wait before trying to reconnect to unreachable clustered server>
#JRunConfig ConnectTimeout 15 <number of seconds to wait on a socket connect to a jrun server>
#JRunConfig RecvTimeout 300 <number of seconds to wait on a socket receive to a jrun server>
#JRunConfig SendTimeout 15 <number of seconds to wait on a socket send to a jrun server>
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
</IfModule>
httpd-vhosts.conf
<VirtualHost x.x.x.x:80>
DocumentRoot "C:/domains/cf2"
<IfModule mod_jrun22.c>
JRunConfig Verbose true
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51000
</IfModule>
</VirtualHost>
<VirtualHost x.x.x.x:80>
DocumentRoot "C:/domains/cf3"
<IfModule mod_jrun22.c>
JRunConfig Verbose true
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/3/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51002
</IfModule>
</VirtualHost>
I also noticed that in each jrunserver.store for every instance, all that's in there is "proxyservers=" Should there be anything else? -
Multiple Instances of OEDQ on a single server
Hi,
I am running a Linux Machine (Linux 2.6.18-308.1.1.0.1.el5), on which I have the latest version of Oracle 11g release 2 installed.
I have an instance of oracle Enterprise Data Quality tool running on an apache-tomcat-7 server. Port 8080
Now I have a requirement of Installing another instance of OEDQ on the same server, but a different APACHE_HOME directory and a different Port Number (8081).
So the question is, Can we install multiple instances of OEDQ on a single server?
If so, what are the prerequisites to be maintained.
I did my bit of tries, but ended up having issues with some java errors.
I have posted the error message below.
SEVERE: Context initialization failed
*org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemanager' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casedao' while setting bean property 'caseDAO';*
The complete Error Log in the Catalina.out file is pasted below.
INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: /u100/app/PCEXDB/orpcexmt/oracle/loqate:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
May 13, 2013 12:50:08 AM org.apache.coyote.AbstractProtocol init
INFO: Initializing ProtocolHandler ["http-bio-8081"]
May 13, 2013 12:50:08 AM org.apache.coyote.AbstractProtocol init
INFO: Initializing ProtocolHandler ["ajp-bio-8010"]
May 13, 2013 12:50:08 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 792 ms
May 13, 2013 12:50:08 AM org.apache.catalina.core.StandardService startInternal
INFO: Starting service Catalina
May 13, 2013 12:50:08 AM org.apache.catalina.core.StandardEngine startInternal
INFO: Starting Servlet Engine: Apache Tomcat/7.0.29
May 13, 2013 12:50:08 AM org.apache.catalina.startup.HostConfig deployWAR
INFO: Deploying web application archive /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/dndirector.war
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-tiles is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-html is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-bean is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-logic is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-nested is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-bean is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-html is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-logic is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-nested is already defined
May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
INFO: TLD skipped. URI: http://struts.apache.org/tags-tiles is already defined
May 13, 2013 12:50:14 AM org.springframework.web.context.ContextLoader initWebApplicationContext
INFO: Root WebApplicationContext: initialization started
May 13, 2013 12:50:14 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh
INFO: Refreshing com.datanomic.director.startup.WebApplicationContext@2dfe88b8: display name [Root WebApplicationContext]; startup date [Mon May 13 00:50:14 CDT 2013]; root of context hierarchy
May 13, 2013 12:50:16 AM com.datanomic.director.startup.WebApplicationContext loadBeanDefinitions
INFO: Spring bean loading complete.
May 13, 2013 12:50:24 AM org.springframework.web.context.ContextLoader initWebApplicationContext
SEVERE: Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemanager' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casedao' while setting bean property 'caseDAO'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casedao' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casemetadata' while setting bean property 'caseMetadata'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemetadata' defined in class path resource [conf/casemanagement.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380)
at com.datanomic.director.startup.WebApplicationContext.refresh(WebApplicationContext.java:109)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casedao' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casemetadata' while setting bean property 'caseMetadata'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemetadata' defined in class path resource [conf/casemanagement.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380)
at com.datanomic.director.startup.WebApplicationContext.refresh(WebApplicationContext.java:109)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4791)
at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5285)
at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:901)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:618)
at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:963)
at org.apache.catalina.startup.HostConfig$DeployWar.run(HostConfig.java:1600)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
at java.util.concurrent.FutureTask.run(FutureTask.java:166)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
at java.lang.Thread.run(Thread.java:722)
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemetadata' defined in class path resource [conf/casemanagement.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1279)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
... 46 more
Caused by: org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
at org.springframework.beans.AbstractPropertyAccessor.setPropertyValues(AbstractPropertyAccessor.java:104)
at org.springframework.beans.AbstractPropertyAccessor.setPropertyValues(AbstractPropertyAccessor.java:59)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1276)
... 57 more
May 13, 2013 12:50:24 AM org.apache.catalina.core.StandardContext startInternal
SEVERE: Error listenerStart
May 13, 2013 12:50:24 AM org.apache.catalina.core.StandardContext startInternal
SEVERE: Context [dndirector] startup failed due to previous errors
May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc
SEVERE: The web application [dndirector] registered the JDBC driver [oracle.jdbc.OracleDriver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered.
May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc
SEVERE: The web application [dndirector] registered the JDBC driver [org.postgresql.Driver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered.
May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader checkThreadLocalMapForLeaks
SEVERE: The web application [dndirector] created a ThreadLocal with key of type [java.lang.ThreadLocal] (value [java.lang.ThreadLocal@623e20db]) and a value of type [java.lang.Class] (value [class oracle.sql.TypeDescriptorFactory]) but failed to remove it when the web application was stopped. Threads are going to be renewed over time to try and avoid a probable memory leak.
May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader checkThreadLocalMapForLeaks
SEVERE: The web application [dndirector] created a ThreadLocal with key of type [java.lang.ThreadLocal] (value [java.lang.ThreadLocal@da1c402]) and a value of type [java.lang.Class] (value [class oracle.sql.AnyDataFactory]) but failed to remove it when the web application was stopped. Threads are going to be renewed over time to try and avoid a probable memory leak.
May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/docs
May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/examples
May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/manager
May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/ROOT
May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/host-manager
May 13, 2013 12:50:25 AM org.apache.coyote.AbstractProtocol start
INFO: Starting ProtocolHandler ["http-bio-8081"]
May 13, 2013 12:50:25 AM org.apache.coyote.AbstractProtocol start
INFO: Starting ProtocolHandler ["ajp-bio-8010"]
May 13, 2013 12:50:25 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 16882 ms
Can someone please tell me what is going wrong here?Hi,
Multiple instances of EDQ on a single server is technically possible provided the installer takes care to avoid port conflicts. It is not the case that there is a single port used by an EDQ server, for example.
For various reasons, it is not officially supported; attempting to diagnose issues on custom installations on Tomcat is especially difficult and we do not provide documentation on this. In general, the requirement usually comes up for Dev/Test instances (as there is no performance advantage of using multiple instances on a single server), where we would recommend the use of virtualization where this is a requirement.
Regards,
Mike -
Multiple instances and mail config
Maybe I dont understand the right concept of multiple
instances but what I did was the following:
Setup up an instance for each domain I have running as a
VHost on apache.
What I was trying to accomplish is the failover of any one
domain and also to use separate mail settings for each domain.
But this is where I seem to have misunderstood the concept of
multiple instances, is it not possible to use a different smtp
server for each domain? When my forms for each domain generates an
email I want the email to originate from that domain not the main
one setup in CF...
ThanksYour on the right track.
Set up say 4 websites (virtual hosts) eg www.mydomain1.com,
www.mydomain2.com etc
Set up 4 cf instances if you have 4 domains, maybe call them
mydomain1, mydomain2 etc
Using the Web Server configuration tool, config the cf
instance mydomain1 to virtual host mydomain1, cf instance mydomain2
to VH mydomain2 etc
The website should now be working using their own Cf
instances.
Go into the CF Admin, scroll to the bottom of the left menu
and you should see Instance Manager
Clicking on this should either reveal the 4 cf instances or
you may have to add them (should be a button)
Once you see all 4, you should be able to click on the admin
for each individual instance and change the smtp server as
appropriate.
This won't give you failover though, if a CF instance goes
down, that site is gone. Clustering is the way to give failover and
you can achieve this fairly easily.
Expanding on the above example, you would create 8 CF
instances eg mydomain1-1 mydomain1-2, mydomain2-1 mydomain2-2.
Create 4 clusters eg mydomain1cluster, mydomain2cluster etc
In the CF Administrator Add mydomain1-1, mydomain1-2
instances to mydomain1cluster etc
Using the Web Server configuration tool, config the cluster
mydomain1cluster to virtual host mydomain1 etc
each domain should now be using 2 cf instances, you will be
able to down on of those instances the the site will continue
working.
Back in the instance manager under CF Admin, you should now
have 8 instances - config mydomain1-1, mydomain1-2 to the
appropriate smtp server etc
The above is for CF MX 6 onwards too, not sure about previous
versions.
I think thats what your after? I've skimmed over some parts
above in relation to the clustering, but there's a handy doc
floating around on the web by Herrlich & Ramuschkat that will
guide you through it.
BTW, those instances can sit on multiple physical servers for
hardware redundancy. Depending on how many domains you have and the
power of your machines, this is a preferred way to go although
expensive due to multiple CF licences -
Multiple instance of tomcat 4.0
Hi,
I am trying to configure tomcat 4.0 for multiple instances, but don't understand how to do it.
The only thing i understood is tha i must start tomcat with different server.xml. But how ......
I looked for documentaion but only found explanation for linux (i am using win2k).
Have you good documentation about configuring tomcat on win2k ??
Thanks.
FredThanks for the reply.
Catalina.start: LifecycleException: Error creating server socket (java.net.Bind
Exception): java.net.BindException: Address in use: JVM_Bind
LifecycleException: Error creating server socket (java.net.BindException): jav
a.net.BindException: Address in use: JVM_Bind
at org.apache.catalina.connector.warp.WarpConnector.initialize(WarpConne
ctor.java:491)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:553)
at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
----- Root Cause -----
java.net.BindException: Address in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:408)
at java.net.ServerSocket.<init>(ServerSocket.java:173)
at java.net.ServerSocket.<init>(ServerSocket.java:124)
at org.apache.catalina.net.DefaultServerSocketFactory.createSocket(Defau
ltServerSocketFactory.java:118)
at org.apache.catalina.connector.warp.WarpConnector.initialize(WarpConne
ctor.java:485)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:553)
at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
StandardServer.await: create[8005]: java.net.BindException: Address in use: JVM_
Bind
java.net.BindException: Address in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:408)
at java.net.ServerSocket.<init>(ServerSocket.java:173)
at org.apache.catalina.core.StandardServer.await(StandardServer.java:277
at org.apache.catalina.startup.Catalina.start(Catalina.java:794)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
I have this error.
Must i configure two CATALINA_HOME ?
Fred -
Multiple instances of Mail.app must be possible
I've seen many questions regarding the possibility of running multiple instances of Mail.app as separate processes. There seems to be much good reason to be able to do so, i.e. separating work and private mail, and very little bad reason to do so (maybe some problems when doing upgrades or backups, but I'm not yet sure of this). It also seems that it should not be so hard to do.
So far, using some web acquired wisdom, I've done the following:
1. Duplicate mail.app:
sudo ditto Mail.app WorkMail.app
2. Rename the executable:
mv /Applications/WorkMail.app/Contents/MacOS/Mail /Applications/WorkMail.app/Contents/MacOS/WorkMail
3. Use Property List Editor to set the following values in/Applications/WorkMail.app/Contents/Info.plist (Apple-S to Save changes!):
Root/CFBundleExecutable=WorkMail
Root/CFBundleIdentifier=com.apple.workmail
Root/CFBundleName=WorkMail
Root/NSServices/0/NSPortName=WorkMail
Root/NSServices/1/NSPortName=WorkMail
Root/NSServices/2/NSPortName=WorkMail
Root/UTExportedTypeDeclarations/0/UTTypeIdentifier=com.apple.workmail.emlx
Root/UTExportedTypeDeclarations/1/UTTypeIdentifier=com.apple.workmail.emlx.part
4. Create the following directories:
mkdir ~/Library/WorkMail Downloads
mkdir ~/Library/WorkMail
4. Launch the 'new' application 'WorkMail'.
5. Create mail accounts using the application's 'wizard'.
Here is where the first problem is encountered. The new account directories and files are still created at ~/Library/Mail. Navigating to Mail->Preferences->Accounts->[account_name]->Advanced seems to offer the option to change the mail store account directory, but nothing can actually be changed here. So...
6. Quit WorkMail.
7. Move newly created account(s) directories (where [newaccountdirectory] is a directory named with the format: [mail_type]-[user]@[domain].[tld]@[pop].[domain].[tld]]) to the correct location:
sudo mv ~/Library/Mail/[newaccountdirectory] ~/Library/WorkMail/
8. Use Property List Editor to set the following values in ~/Library/Preferences/com.apple.workmail.plist (Apple-S to Save changes!):
/Root/ActiveViewers/0/AttachedMailboxListExpandedItems/[0to_#_ofaccounts]/=~/Library/WorkMail/Mailboxes/...
/Root/CurrentTransferMailboxPath=~/Library/WorkMail/Mailboxes/...
/Root/MailAccounts/[0to_#_of_accounts]/AccountPath=~/Library/WorkMail/[new_accountdirectory]
/Root/MailDownloadsPath=~/Library/WorkMail Downloads
9. Relaunch WorkMail.
Everything at this point seems to work okay, **BUT** when I launch Mail while WorkMail is launched, I find that I cannot navigate into any mail folders within Mail. I receive an error message indicating that a necessary directory is locked. It seems that the locking mechanism used by the application may be hard-coded to lock ~/Library/Mail, and both instances of the application continue to take this action when launched, making it impossible for both to work harmoniously at the same time. I will conduct more testing and experimentation, but I am not yet capable of editing the application itself. If anyone can take us this last step, I'm sure there are many who would also like to be able to take advantage of the potential functionality.
Thanks for any input!
Steven StromerHopefully, there is someone with a programming background who
can take me and other who have posted similar questions through
the final mile on this...
Well, I do have a programming background, and I must say that it amazes me that someone might want to do what you did to “solve” a problem that IMO doesn’t exist.
What exactly is it that you expect to accomplish by running multiple instances of Mail, and for which neither (1) organizing your mail using multiple mail accounts, custom mailboxes, rules, and/or smart mailboxes, nor (2) setting up separate user accounts, are acceptable solutions? I just don’t get it.
I've seen many questions regarding the possibility of running multiple
instances of Mail.app as separate processes.
I haven’t. Could you please provide a link for such a question, preferably one asked by someone who knew how Mail and Mac OS X work, i.e. a link for a case where there really was such a need?
There seems to be much good reason to be able to do so
I know of no such reasons, neither good nor bad.
i.e. separating work and private mail
I don’t see how that’s a reason to want to run multiple instances of Mail. Could you please elaborate?
Maybe if you tell us what exactly is the problem that you’re trying to solve, instead of focusing on a convoluted “solution” that doesn’t work, we could propose a solution that does...
and very little bad reason to do so
Well, if the fact that it’s so convoluted and doesn’t even work aren’t bad enough reasons, I don’t know what it is...
It also seems that it should not be so hard to do.
I wonder what makes you think so. It does certainly seem hard to me, so hard that I don’t even think it can be done without breaking something, if at all... -
I have successfully created an animated button that opens to reveal a quotation with a nested clickable link to the source. What I would like to do is have several of these with different quotes inside them, scattered on the page. I have looked at the composition loader available via Edge Commons, and it seems that would require some sort of Edge animate Stage 'frame' to load the instances into? Is there any way to place them directly into the master page - as div elements...?
The outer of the buttons is the same, on hover they open partialy on click fully, to reveal their particular text - which I thought about loading it at runtime with json, or maybe handlebars...?
I would also like to make the buttons only take the necessary space. ie. before they expand they are only buttons. ( I have set the stage to hidden but it still takes up space). To acheive this, I think perhaps I will have to target the inner components css, and set them as display:none until the button is hovered over, then set :hover and :active pseudo classes inside edge. Is this feasible?
Thanks in advance for any ideas/suggestions...Hello, Thanks for your helpful input. Based on that, and the tutorial 'http://tv.adobe.com/watch/learn-edge-animate-cc/ingesting-external-data-dc/' - I have written code to drive my button's behaviour. (copied below...)
var textArray =new Array();
var currentHead = 0;
var currentText = 0;
var currentFoot = 0;
var s = sym.getSymbol("textContainer");
sym.$("textContainer")$.("text").html("");
var sh = sym.getSymbol("headContainer");
sym.$("headContainer")$.("head").html("");
var sf = sym.getSymbol("footContainer");
sym.$("footContainer")$.("footer").html("");
$.getJSON("assets/sources1.json", function(data){
for (var i=0; i<data.length; i++){
textArray.push({"head":data[i].heading,
"text":data[i].text,
"footer":data[i].foot,
"link":data[i].link});
sym.$("headContainer")$.("head").html(textArray[currentHead]).heading;
sym.$("textContainer")$.("text").html(textArray[currentText]).text;
sym.$("footContainer")$.("foot").html(textArray[currentFoot]).foot;
sym.$("footContainer")$.("link").html(textArray[currentLink]).link;
But there is an error I don't understand at line 7...
Also - as you can see, at present I have several symbols in parallel. Would I be better off nesting the text containers inside the outer button container? and would I be better off creating styled mini- pages of text data, and then loading them - instead of loading them as symbols? I have had to create seperate symbols because I cannot adequately stle the text - so some is bold, some is italic etc. within one text field. Or can I? I guess I could nest several text fields inside one symbol...?
I remain unsure how to load the finished animation button instances. In your example you were still loading into an animation But from yor example, I guess I would need to place all my examples inside an outer edge composition... but then I think positioning them accurately with css, making adjustments etc. will be fairly tricky. Is there any way to place multiple instances directly into divs in index.html? Could I simply repeat the class...? I may be answering my own questions here. -
Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?
Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
Problem description:
Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
EtreCheck version: 2.1.8 (121)
Report generated 6 February 2015 08:40:29 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 75
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:13:14
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
BUFFALO HD-PVU2 500.11 GB
EFI (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
Launch Agents: ℹ️
[loaded] com.hp.help.tocgenerator.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Skype UNKNOWN (missing value)
Safari Application (/Applications/Safari.app)
Dropbox Application (/Applications/Dropbox.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 184
Oldest backup: 2010-12-10 15:37:39 +0000
Last backup: 2015-02-06 02:49:24 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 184.16 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% ConnectService
1% Skype
0% systemstatsd
0% launchd
Top Processes by Memory: ℹ️
193 MB Skype
168 MB mds_stores
132 MB com.apple.WebKit.WebContent
107 MB Mail
99 MB ocspd
Virtual Memory Information: ℹ️
889 MB Free RAM
1.99 GB Active RAM
455 MB Inactive RAM
825 MB Wired RAM
1.11 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 6, 2015, 08:27:32 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
Feb 6, 2015, 08:25:19 AM Self test - passed
Feb 5, 2015, 04:37:08 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
Feb 5, 2015, 10:01:02 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
Feb 5, 2015, 12:03:59 AM /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:58:58 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:54:35 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:49:03 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 09:40:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
Feb 4, 2015, 09:38:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
Feb 4, 2015, 09:27:56 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
Feb 4, 2015, 09:25:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
Feb 4, 2015, 09:20:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
Feb 4, 2015, 09:18:10 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
Feb 4, 2015, 09:12:54 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
Feb 4, 2015, 08:40:48 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
Feb 4, 2015, 08:22:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
Feb 4, 2015, 12:11:35 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
Feb 3, 2015, 09:44:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
Feb 3, 2015, 05:40:21 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
Feb 3, 2015, 09:05:45 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
Jan 28, 2015, 06:10:42 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
Jan 21, 2015, 10:51:25 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
Jan 20, 2015, 11:12:47 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
Jan 18, 2015, 09:57:31 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
Any further assistance will be appreciated -
Multiple instances of firefox running cannot kill in task manager "Access denied"
There's no issue with starting a new instance after closing one, the "firefox is already running" error is not occurring (ok maybe once or twice a month, but it's not related to this problem, as my problem happens all the time.)
Apparently when closing a ff window it never fully stops. My computer slows down because of it and these multiple instances of firefox show up in Task Manager. When I try to kill the extra processes it just goes "BANG" and the "access denied" error dialog box appears. They are all running under my user account, and in CPU some are just 10 or 25 and some are in the hundreds and some are over a million. what the heck is going on?
I'm running Windows 7 64 bit and ff 23.0 but this has been happening since about ff 15 (?)When closing Firefox completely, it is important to close it using the <i>Exit</i> button, located inside of the Firefox/File menu.
Another cause to this problem could be a Firefox preloader. Do you have any programs that will load Firefox automatically? They are supposed to improve start time.
You can also '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* Open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
I hope that one of my solutions helps to fix your problem. Please report back with updates soon.
<b>NOTE: </b>You are using an outdated version of Firefox. This can cause security and functionality issue. Please update to the most recent version as soon as possible. -
Having trouble running multiple instances of Firefox in XenDesktop 7.1
We recently upgraded our Citrix environment to XenDesktop 7.1. We published Firefox, but only one user at a time can have the program open. When we try to run multiple sessions, we get this error message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
We've had it published in previous Citrix environments with no problems. How do we need to configure Firefox in XenDesktop so that multiple users can run the program at the same time? Thanks.I do not understand virtualisation.
I can however say that ordinarily Firefox needs each user to have a separate profile and for Firefox to open simultaneous multiple instances with separate profiles the ''-no-remote'' argument needs to be used.
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile -
Multiple instances of explorer.exe running in task manager
I got a dropper trojan virus on my computer that microsoft security essencials do not recognized but after running "superantispyware" antivirus I got discover it and delete it. After that, I still could find the infected files in my
administrator folders as .temp files and I just erased them. After that my computer started crashing and runing several instances of explorer.exe in the task manager with different memory values, some of them ascending to 350,000. I have set up my computer
to run just the basic services, I have tried windows in safe mode, ran other antivirus programs but still it is performing the same. As far as I have noticed other unusual process present are host.dll, dllhost.exe, and logonUI.exe. Any idea about it? Thanks
in advance for your help.I have the same issue. It started about a month ago when I was filling out a form online and had to quit and close the window. My system got very buggy (can't remember details), flashing, then really slow. Found a bunch of explorer.exe instances
in Task Manager. Ran Security Essentials and several other anti-viruses, nothing found.
Running Win7 Pro, sp1, 64-bit, CoreI5, 4Gb Ram
Restored system to a previous version, didn't work
Restored last system image, didn't work
Used System Repair Disk - ran Memory Diagnostic. Said it would give me report after reboot. Never saw a report after reboot. But only one instance of explorer.exe in task manager at that point. Took disk out, rebooted normally. After
20 minutes or so, the multiple instances were back.
Used Repair Disk again, ran Memory Diagnostic. Again, no report after reboot (leaving disk in machine both times), but only one instance running again.
Did this a few times with the same result, so now leaving disk in system and always boot from it.
Ran Security Essentials again, found that rovnix virus, removed, ran again, found it again.
Ran search for instances and found many. Here's an example:
C:\Windows\explorer.exe
C:\Windows\winsxs\wow64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.17567_none_b9fc4815c4e292b5
C:\Windows\winsxs\amd64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.21669_none_b0333b22a99da332
C:\Windows\winsxs\wow64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.21669_none_ba87e574ddfe652d
C:\Windows\winsxs\amd64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.17567_none_afa79dc39081d0ba
C:\Windows\SysWOW64
When I check properties on the now single one on Task Manager, this is what it shows:
C:\Windows\winsxs\amd64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.17567_none_afa79dc39081d0ba\explorer.exe
C:\Windows\explorer.exe
I was going to reinstall entire system, but was from an Anytime Upgrade which now says it's invalid. Much more to story on that (calls to MS support, etc.). -
Multiple instances of Internet Explorer in task manager using 100,000 KB+ memory
Hi! I recently got a virus on my computer that causes multiple instances of explorer.exe and iexplorer.exe to appear in my processes tab of task manager. Over the course of about a minute, the memory usage of each begins to climb rapidly until all of my
memory is being used by these. These do not appear in my applications, nor do they actually open up an internet explorer window. When I end task on them, another one appears about a minute later to take its place and do the same thing again. Additionally,
when I click shut down to turn my computer off, various advertisements flash on my screen for a few seconds before the computer begins to shut down. When the computer is started up, a window appears for a split second that contains only blackness. I have never
seen this window appear before the virus was obtained. When I end task on all my explorer.exe and iexplorer.exe applications at the same time, my desktop vanishes, but it also stops those applications from reappearing. This virus has caused my computer
to run unbearably slow. I have tried Spybot S&D, Exterminateit, AVG, Roadkill, and other methods and nothing seems to detect this or cure it. I am not that good with computers, but I am dying for help on the matter! If you can assist, please let me know
what I can do with detailed instructions for my sake! Thank you!!!!!!See and follow Andy's excellent advices.
In addition...
See: "How to
Reset Internet Explorer settings".
If the issue persists...
1. Please download and run the
Microsoft Safety Scanner tool (freeware).
2. Reboot your PC.
3. Please download and update Malwarebytes Anti-Malware Free
4. Reboot Windows in
Safe Mode and run a Full Scan with Malwarebytes Anti-Malware.
5. Download and Run AdwCleaner (Freeware)
6. Reboot and Test.
Best of Luck,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile -
Open multiple instances for a VI
Dear all,
I created an application to open multiple instances(RecipeEditor.vi as attached)works fine in debug mode. But, after I build it to an exe, it gives me error 1003.
Can you please show me some pointer what is wrong?
Please find attached zipped package
Thank you in advance.
Regards,
Vincent
Attachments:
New folder.zip 1742 KBmy apology, Norbert.
I attached the wrong file. This attachment is password removed.
Thank you in advance
Attachments:
Recipe Editor.vi 286 KB
Maybe you are looking for
-
Use of Gif With Animination In Forms 6i
Hai everone, i am trying to use GIF FILE with Animination in forms 6i but it not working Animination is not working can any one help me or any one have designed form pls help to find solution. Thanx
-
Hello experts. my requirement is , I am having a fiscial year ( gjahr) and period ie month (monart) . Now i need afunction module that gives the last date of the month. say if it is january it should give 31 - month-year. I want to populate this date
-
VLD-2771: System privileges may not allow extraction from source T.
How to solve this problem. while deploying I am getting this message,besides where in oracle site I can find documentation for the errors in warehouse builder. VLD-2771: System privileges may not allow extraction from source T. I had given dba privil
-
I am using ID 5 and Acrobat 8. My client marks up changes on a pdf for me to change the ID file. I used to be able to copy the text from the Acrobat file and simply paste it into the ID file. For some reason it wont do it. So I am having to type UGGG
-
Need Help with Scheduling, Saving, and Emailing a Report From Apex
My ultimate goal is to schedule a report to be created in apex, save it to the database (in pdf), and then email it. I can schedule the proc which underlies the report. I can send an email from the databse. But I don;t know how to do all three of the