Multiple instances of weblogic server 5.1 on one node.
Hi,
We failed to start one instance on a node where we were able to start
another instance from another location.
We installed two instances of Weblogic server 5.1 on Solaris 5.7.
One at /usr/weblogic and another at /opt/weblogic. We were able to start
the /usr/weblogic instance in cluster mode. Then we stopped
/usr/weblogic instance and try to start another instance at
/opt/weblogic in cluster mode. But failed. We have similar directory
structure and files in both places except the weblogic.properties file,
which has different paths.
we are using JDK1.2.2 and got the following Exception
Exception in thread "main" java.security.AccessControlException: access
denied (
java.lang.RuntimePermission createSecurityManager )
at
java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java, Compiled Code)
at
java.security.AccessController.checkPermission(AccessController.java,
Compiled Code)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java, Compi
led Code)
at java.lang.SecurityManager.<init>(SecurityManager.java,
Compiled Code)
at
weblogic.boot.ServerSecurityManager.<init>(ServerSecurityManager.java
, Compiled Code)
at weblogic.Server.main(Server.java, Compiled Code)
at weblogic.Server.main(Server.java, Compiled Code)
Any type of help or suggestion is appreciated.
Thanks
--sreeni.
Hi.
You can create new servers in your domain via the console. Be sure they are
listening to different ports, however. If your NT machine supports more than
1 IP address then you could alternatively bind each server to a different
address.
I'm not sure if this answers your question?
Regards,
Michael
m holur wrote:
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
Madhu--
Developer Relations Engineer
BEA Support
Similar Messages
-
Configuring multiple instances of weblogic server 7.0 on single machine
Hi,
I am trying to configure multiple instances of weblogic server 7.0 on single machine
( sun Solaris 7). I tried to create everytime new domain. Can anybody help me.
Thanks in advance.
RaviYou can have several servers under one domain. No need to create a new
domain for each server. Just configure a server and make sure they are
listening on different ports. you are all set.
Kumar
ravikiran wrote:
Hi,
I am trying to configure multiple instances of weblogic server 7.0 on single machine
( sun Solaris 7). I tried to create everytime new domain. Can anybody help me.
Thanks in advance.
Ravi -
Multiple instances of weblogic server 6.1 running on the same machine
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
MadhuHi.
You can create new servers in your domain via the console. Be sure they are
listening to different ports, however. If your NT machine supports more than
1 IP address then you could alternatively bind each server to a different
address.
I'm not sure if this answers your question?
Regards,
Michael
m holur wrote:
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
Madhu--
Developer Relations Engineer
BEA Support -
Multiple instance of WebLogic server 6.1 on port 80
Hi:
Is it possible to run two seperate instances of WebLogic server 6.1 on same the
server both listening on port 80?
Details about the instances:
Instance 1
Domain names : fasnets
Server name: envext
Listen Address : 155.x.x.1
Listen Port : 80 :
External DNS : www.acme.com
Instance 2
Domain names : fasnets1
Server name: envext1
Listen Address : 155.x.x.2
Listen Port : 80 :
External DNS : www.acme1.com
Thanks,
SoniHi Soni,
Web colsole --> your domain --> your server --> configuration -->
general --> Listen Port / Listen Address
Regards,
Slava Imeshev
"Soni " <[email protected]> wrote in message
news:3dcfbbcb$[email protected]..
>
Hi:
Is it possible to run two seperate instances of WebLogic server 6.1 onsame the
server both listening on port 80?
Details about the instances:
Instance 1
Domain names : fasnets
Server name: envext
Listen Address : 155.x.x.1
Listen Port : 80 :
External DNS : www.acme.com
Instance 2
Domain names : fasnets1
Server name: envext1
Listen Address : 155.x.x.2
Listen Port : 80 :
External DNS : www.acme1.com
Thanks,
Soni -
Running Multiple Server Instance in Weblogic Server
Hi
I am using Weblogic 5.1.0 with SP6. I am trying to run multiple server
instances
of Weblogic Server. The one that comes by default is "myServer".
My question is if i were to create multiple server instances, do i need to
copy the
weblogic.properties file in each of folder corresponding to respective
application
server instance. I am not using Clusters.
Also if i need to include some classes or jar files in my application server
instance
classpath, how do i do it. cuz in weblogic.properties file i didn't find any
property
corresponding to classpath.
The classpath i need to set is for my creating a JDBC pool for connectivity
to my
AS400 DB2 database using the Type 4 (AS400JDBCDriver) Driver. Is there some
other way to do it.
Thanks in advance
NiranjanThere is an answer on your first question at
weblogic.support.interest.clustering
I asked a similar question. Search for a message posted by me on 24/11/00
Rgds,
Mike
"Niranjan Soni" <[email protected]> wrote in message
news:[email protected]..
Hi
I am using Weblogic 5.1.0 with SP6. I am trying to run multiple server
instances
of Weblogic Server. The one that comes by default is "myServer".
My question is if i were to create multiple server instances, do i need to
copy the
weblogic.properties file in each of folder corresponding to respective
application
server instance. I am not using Clusters.
Also if i need to include some classes or jar files in my applicationserver
instance
classpath, how do i do it. cuz in weblogic.properties file i didn't findany
property
corresponding to classpath.
The classpath i need to set is for my creating a JDBC pool forconnectivity
to my
AS400 DB2 database using the Type 4 (AS400JDBCDriver) Driver. Is theresome
other way to do it.
Thanks in advance
Niranjan -
Multiple instances of weblogic pointing to same public_html
Hi,
I am using Weblogic 5.1 and have successfully set it up to start multiple instances
of weblogic from one weblogic server(each instance has its own unique port).
Currently I have multiple instances of public_html (one for each instance). Does
anyone know what I have to do to point all instances of weblogic to a common public_html?
Many thanks in advance
Dipencreate a symbolic link that is called public_html that points to the common
docroot.
"Dipen" <[email protected]> wrote in message
news:3b7cf1bf$[email protected]..
>
Hi,
I am using Weblogic 5.1 and have successfully set it up to start multipleinstances
of weblogic from one weblogic server(each instance has its own uniqueport).
Currently I have multiple instances of public_html (one for eachinstance). Does
anyone know what I have to do to point all instances of weblogic to acommon public_html?
>
Many thanks in advance
Dipen -
Running Multiple Instance of indesign server using com calls
Hello All,
I am new to this community , can anyone help me in understanding how can i run multiple instance of indesign server using com calls.. i am using jacob library in java for com calls ..
ThanksHi Soni,
Web colsole --> your domain --> your server --> configuration -->
general --> Listen Port / Listen Address
Regards,
Slava Imeshev
"Soni " <[email protected]> wrote in message
news:3dcfbbcb$[email protected]..
>
Hi:
Is it possible to run two seperate instances of WebLogic server 6.1 onsame the
server both listening on port 80?
Details about the instances:
Instance 1
Domain names : fasnets
Server name: envext
Listen Address : 155.x.x.1
Listen Port : 80 :
External DNS : www.acme.com
Instance 2
Domain names : fasnets1
Server name: envext1
Listen Address : 155.x.x.2
Listen Port : 80 :
External DNS : www.acme1.com
Thanks,
Soni -
Deploy multiple instances of WebLogic (null)
Dont' crosspost.
- Prasad
Rajashekar Narsina wrote:
> Hi,
>
> When I have multiple instances of weblogic, can I use weblogic.properties
> file for each instance of server.
>
> If so, what should I do for that,
> it is urgent, your help will be greatly appreciated.
>
> Raj
-
Install Multiple Instance of sql server
Hi guys,
I have one question. How can i install multiple instance in sql server ( I am using 180 days VHD to access sql server r2 standard edition). I am accessing sql server through Hyper-V Manager. Can anyone guide me please.
Regards,
JaganHello Jagan,
For each instance you have to run the SQL Server installer and assign a unique instance Name during Installation; for each instance the Installation procedure is the same.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Can policy agent protect multiple instances of app server
I created multiple instances of Sun ONE App server 7.0, and one web-app in each instance. But When I am installing Policy Agent 1.1 for the second instance of App server, it told me that I HAVE had it installed.
How can I protect multiple instances of App server?I see another thread on this subject. Thanks.
-
Multiple document roots on one instance of weblogic server..
Hi,
Is it possible to configure multiple document roots for one weblogic server?
Here is my situation...
We have a sun box which is having 4 IP addresses. We would like to have a
document root for each IP address, but we want to run a SINGLE weblogic
server instance..
Any help is appriciated..
thxcheck this out for more info:
http://www.weblogic.com/docs51/admindocs/properties.html#multihoming
"Mauricio Del Moral" <[email protected]> wrote in message
news:3977759c$[email protected]..
Hi,!
I'm afraid not, but that would be great. -
Multiple instances of Weblogic on NT
Is is possible to run two instances of WebLogic on an NT server as
services? Specifically, I want to set up web server clustering on two
machines, but I am also going to be running another custom Weblogic
app that will access a backend database. I need to set up a separate
weblogic server for the database app outside of the clustering
weblogic webservers?
Thanks
Steveyes u can run multiple instance of the service.
There is a parameter in install.exe where you can specify the name of the
service and in this manner you can have as many services as you want
Chuck Karish wrote:
[email protected] wrote:
Is is possible to run two instances of WebLogic on an NT server as
services?No. The NT support programs aren't set up to handle the multiple
registry keys that would be needed, and they aren't set up to
allow for setting different names for the several services.
Specifically, I want to set up web server clustering on two
machines, but I am also going to be running another custom Weblogic
app that will access a backend database. I need to set up a separate
weblogic server for the database app outside of the clustering
weblogic webservers?
Thanks
Steve--
Chuck Karish BEA Systems
[email protected] San Francisco, CA
(415) 317-0182 (cell) (415) 364-4692 -
Multiple instances on single server
Hi all,
I have a Solaris 10 server with 2x dual core CPU's.
I am wondering if it was at all possible to install Business Intelligence Server on this single OS twice? And if it is, can I split the CPU between the different instances?
The reason for this is that I would like both production and test/development installed onto the same OS to cut costs. But I don't want the test/development instance to use resources that would affect the performance of the production environment.
Ideally I'd like the 2 instances, with the production instance using 3 cores, and the test/development instance using 1 core. If the RAM could also be split that'd be great.
Thanks for your help in advance.
CheersYes, you can have multiple instances of Presentation Services (PS) ([see my blog posting for details|http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/]) which would let you split envs, but you'd do that with a single instance of BI server. I don't know if it's possible to run multiple BI servers
I don't think you should be trying to do this anyway, several reasons why not:
1) It's not supported to run multiple PS on one server. That should be reason enough not to do this on prod.
2) If it's not possible to run multiple BI Servers on one server then you'd end up running one BI Server with dev/test/prod RPDs - you'd never be able to bounce your BI Server for dev work without taking down prod
3) Any time you needed downtime for dev, you'd affect prod
4) Any patching you wanted to do on dev might affect prod
5) Any experimental work you do that crashes dev would affect prod.
If you only have the one box available to you for costs reasons then you should be looking into virtualisation of some kind, eg http://www.virtualbox.org -
Multiple instances of app server
Is it possible to run multiple instances of OracleAS 10g (listening on different ports) on a single Windows 2003 server? What issues would need to be addressed?
Thanks.I see another thread on this subject. Thanks.
-
Multiple instance of Sql server running for Analyzer 7.0 install
Hi,I do have a Sql server instance where the server name is: abc\xyz. Will analyzer accetp a '\' as the server name. This instance of Sql server is not running is not running on the std port 1433. Let me know if there will be any issues whrn installing Analyzer 7.0.Thanks,
There can only be a single default instance and multiple named instances.
BOL: http://technet.microsoft.com/en-us/library/ms143547.aspx
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012
Maybe you are looking for
-
Help:Can not find the file in jar!
Hello everyone: I build a project using Netbeans 5.0 and make a jar file with it... The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml String dataFilePath = getClass().getRes
-
Advanced: Publishing to multiple domains (Folder structure, Podcast URL's)
Hi everybody! I am sooo excited, yet so frustrated here: I realize iWeb is being launched as a consumer app, and so have enjoyed the additional functionality Apple has brought with redirects, and personal domain availability, but have fallen in love
-
I have a new email address but when I am asked to sign in with my Apple ID for Apple store my iPad automatically shows my old email and rejects my password. How do I get around this?
-
Link file name to a field in the form for save as button
Does anyone know how to have the file name auto populate from a field in your form when using a button that does a save as function? Best regards, Michael
-
Time differences between camera and iMovie
Hi, When I import footage from my Mini-DV camera into iMovie I am seeing a difference between the time displayed on the tape and time displayed in iMovie. The camera says 48 seconds while iMovie says 44 seconds. I thought that it might be related to