Multiple issues on '09 MacBook Pro- battery, DVD drive, slowness, browsers

I have a mid '09 MacBook Pro 2.53GHZ, 4GB RAM, running OS 10.5.8.
Recently, it's begun exhibiting random bad behavior, starting with slow behavior in Finder processes and, especially, very slow behavior and crashing in multiple apps, especially browsers (or maybe i just notice it there more because i use them the most). Then, all of a sudden the battery, which previously was fine and held a good charge, showed as Not Charging. I still have Applecare and called them, and they had me reset the power manager, which restored the battery to charging, but now it runs out quickly and often has strange readings, such as saying it has 6 minutes of charge when it also reads as 99% charged. The readings often have nothing to do with the actual state of the battery.
It's also suddently running a lot hotter and the fan is turning on more often, tho some of that may be that i now have both Google Chrome and Safari running at all times (i switch between them depending on which isn't hanging at any given time- both will crash with crashes of basic plug-ins, or simple non-responding, even tho Chrome is a newly installed app)
In case of system corruption, i decided it was a good time to upgrade to OS 10.6, which i simply hadn't gotten around to (a 10.6 disk came bundled along with with the original 10.5 disks with the Macbook when i bought it in late '09, probably an upgrade, it was right when they were switching over)... but i discovered that now DVDs won't mount either... so i can't install, reinstall, or even run diagnostics.
In disk utility booted from the internal drive, hard drive "verifies" fine and permissions are fine.
I've got a genius bar appointment the next time i go to city with the nearest Apple store- 120 miles away-
but any suggestions or ideas meanwhile?
the hardware issues- DVD drive, power, battery- make me wonder about the logic board's health.
Or could this still all be from OS or hard drive corruption?
And can i boot the Macbook from its Time Machine backup, which is on a firewire external drive, in order to run diagnostics? Not familiar with what Time Machine can and can't do. Otherwise, maybe i can borrow another mac to install OS from DVD to an open partition that's on the firewire hard drive and try to boot/run diagnostics from that (?). If i do that, should i do it with OS 10.5 (what it shipped with, and is currently running) or is it ok to do it with OS 10.6?
I'm also going to try to run in alternate user account to see if the browser etc crashes are as bad (i did try it briefly and found it still slow, tho not so badly).

Have you tried a SMC reset? Do a google search for more info.
http://support.apple.com/kb/HT3964

Similar Messages

Multiple Issues with my Macbook Pro

Jan 2011- Received my Macbook Pro 15 inch (late 2011 version)
Feb 2011- Overheating issue, laptop started running very slowly without any applications open
Feb 2011- Sent it to Apple US, test was run, no issue found by Apple, they re-installed the OS, piece returned back, seemed to be running normally
Early 2012- Major battery issue, battery would suddenly drop down from 90% to 25% in 5 minutes with hardly any applications open
From late 2012 to present- When the laptop is put to sleep (with screen closed) and is opened after half an hour or longer, the mouse cursor remains stuck on the screen after waking it up. The only way to continue using the laptop is to restart it so that the mouse starts moving again. Every time the laptop is woken up after sleep mode, the speed of all running applications comes down noticeably.
Mid 2013- Replaced the Battery for Rs. 8000/- After using it just for two years
Late 2013- Laptop fan runs at a high speed even though there are no applications open on the system, suspected Temperature sensor issue, Activity monitor shows a particular kernel that is taking up a huge amount of CPU load.
I have only faced issues with my macbook pro and it still doesn't end,Is there any way I can ask for an out of warranty replacement or atleast if there is a permanent solution at an affordable cost? Apple as a brand has set a benchmark , it is only fitting that as loyal apple customers we expect products to exceed expectations in terms of performance and longeivity and not pose as a problem at every turn.There isn't any sense in going on spending on a laptop that costs a bomb already!!!

While you were on the warranty or if you still have it, you should check out the Apple Store. When you had noticed these problems earlier, you should have immediatly reacted upon them, rather than waiting.

Having issues with 13" MacBook Pro. Running very slow and blank screen and sleep mode.

Bought my MBPro summer 2009. About a month / 6 weeks ago it began to run extremely slow at points. Now it is running poorly and getting very slow on a daily basis, to the point where it will not open applications, documents or even web pages for in excess of 5 minutes. I'm beginning to lose patience!
Also at the exact same time of these performance issues occuring, my MacBook Pro will not awaken from sleep mode when the lid is closed. Showing a blank dark screen and having to hard reset in order to boot up my system again and get it running.
What is the best solution in order to resolve these issues?
Your help is greatly appreciated.

Did you run Disk Utility>First Aid? If so what were the results? This is a copy of mine, note that the bottom line says: The partition map appears to be OK:
Ciao.

Having multiple issues with my MacBook Pro

I have a MacBook Pro that I purchases new January 2013. I upgraded from Mountain to Maverick about 2 months ago, with no problems.
About 3 days ago it started acting up. It started with my not being able to open Safari, although a few hours later I could, but then the next day and since I have not been able to again. I am unable to open several other programs, such as any adobe (illustrator, photoshop, InDesign, etc.). My anti-virus program is responding (I use Web Root). The speed has drastically reduced, as well... very sluggish, which I suppose is not surprising.
I, also, am not able to restart or shutdown properly. Last night I forced a shutdown because absolutely nothing was opening. Today, I was atleast able to open Finder and other basics, such as Reminder. However, I just went to see what other's I may be able to open and now just Finder will. I cannot give specs because boxes will not stay open. They just open for about half a second.
I apologize if I am all over the place. Any help will be greatly appreciated, thanks!
PS. I believe the reason the few things that would open before are only flashing for half a second is because it is still trying to shutdown. When I tried to force a shutdown, it said that it is already shutting down, which it's been doing for about an hour now.

Unfortunately, I think that the fact that you mentioned the presence of anti-virus software has dragged this discussion a bit off course. As you say that WebRoot has been installed for a year, while the problem just started recently (and not right after upgrading to Mavericks), I don't believe that the anti-virus software has anything to do with it.
As for what the problem might be, my best guess for something with such a sudden and unexplainable onset is a dying hard drive. Do you have backups of your data? If not, that could become a very serious problem. First priority needs to be figuring out a way to back up your data.
Once your data is backed up, check the hard drive's SMART status:
If it checks out fine (ie, says "Verified"), try repairing the hard drive with Disk Utility.

Macbook pro external DVD drive initialization error 70012

This is an answer to my own question and a comment about finding answers to questions on Apple forums.
The situation
I have a Macbook Pro, late-2009 model. In 2013, the internal DVD or optical drive died. I purchased an Apple external DVD drive to be able to read DVD disks, listen to audio, and watch video content. Because the computer I own was built to read only the internal DVD drive, it did not recognize this new external drive. When I plugged it in, I received an error: A valid DVD drive could not be found [-70012]. Or , or DVD could not be found, initialization error[- 70012].
The question
Given this situation, my question was, how do I solve DVD initialization error 70012?
The answer
Since my Apple Care plan had long since expired, before spending time and money at the Apple store to solve this, I decided to look online. After searching general sites and more and more specific sites, I found several posts on forums about my problem. The most helpful of these, with respect to an external DVD drive, was posted on CNET, by Topher Kessler (June 10, 2011 2:24 PM PDT):
http://www.cnet.com/news/addressing-dvd-player-error-70012-when-using-external-d rives-in-os-x/
The key to his advice was twofold:
1. Hardware: The Macbook Pro was programmed to recognize the internal DVD/optical drive alone.
2. Software: The preferences in the Macbook Pro were set to open Apple's DVD Player when a disc is inserted into the drive.
To play audio or video discs on an external drive, the computer needed to be instructed to recognize the external drive, plus appropriate software needed to be opened. Mr. Kessler's advice went from hardware (i.e., get a new internal drive), to software (i.e., use different audio or video software), to operating system (i.e., alter the code in the operating system). Like with Goldie Locks, the first was too expensive, the last was too invasive, but the middle option was just right.
I searched for free software to display audio and video on my external drive and found two that could do the job quite nicely. There are others, but these seemed to be the most recognized and highly rated:
1. MPlayerX (http://mplayerx.org/download.html)
2. VLC Media Player (http://download.cnet.com/mac/media-players/?rpp=30)
So, I didn't have to buy an internal DVD drive and I didn't have to alter the code of the operating system. I just needed to download free software, install, and play.
The points to learn
1. Computers involve both hardware and software, therefore solutions to computer problems can require fixes to one, the other, or both.
2. The simplest solution, and the least expensive, is to be preferred over the more complex.
3. What went wrong for someone else is not necessarily what happened to your computer or software.
4. What solved someone else's problem may not solve your problem.
5. Just because nobody has posted information on how to solve your problem doesn't mean there isn't a solution to it.

Hi Duane,
Thanks for the info! That's some catch-22 for DVD Player... but useful info. I guess I'll just pick up a generic DVD-ROM to replace the drive with.
As to the external drive, do not USB 2.0 cases run at the same speeds at Firewire 400 cases? (the same drive has no issues on other machines for playing dvds... just the lampshade iMac)

How do I install Adobe Photoshop Elements 12 on new MacBook Pro without DVD drive?

I just purchased my first MacBook Pro and am trying to get everything set up and installed. I purchased Adobe Photoshop Elements 12 and retrieved my serial number and have the redemption code -- but I can't figure out how to install Photoshop without a DVD drive. The Photoshop package I purchased only provides DVDs and I don't have a DVD drive. Is there a website I can go to to install Photoshop and enter my serial number or redemption code?

Have you tried downloading the trial version and using your serial
number to activate it?
The trial version is a complete product and can be activated by
inserting the valid serial number.
Good luck.

Lightroom 4 macbook pro no dvd drive

So without thinking, I ordered Lightroom 4 as an istallation disc instead of a download. Of course I can't use it on my macbook pro because it doesn't have a dvd drive. Since I will have a serial number can I still download from the Adobe website? Asking before I open the box so I can still return it unopened if I need to.
Feeling pretty dumb

Download and install the Trial version from the Adobe website and authorize it with the serial number which came with the box.
Note: you always have the option to buy a cheap external DVD drive and connect it to the Macbook via USB for the odd occasion when you want to install software from disks or rip a CD. I do that occasionally on my MacBook Air when travelling.

Macbook pro unibody dvd drive replacement

Hi guys, im new here, looking for some advice.
My dvd drive on my macbook pro 13" unibody is playing up, it makes a odd noise when a disc is inserted, like something plastic is scratching.
my DVD burner is GS23N SB03, i think i need to replace mine. Ive found a burner on the net but its a GS23N S23NA, does anyone know if i can swap mine for this? and would i need to do something software wise to get it to work?
many thanks
Gary

How new is your MacBook Pro?, if it is a mid 2010 you can bring it to the apple store to have them take a look to it. If this is the case (having a 2010 MBP), you'll most likely be under the 1 year hardware warranty, and if an error is found with your MBP internal DVD drive, Apple will replace it at no cost.

Anyone else having multiple issues with their Macbook Pro with the Lion Update?

I had beachballing and the wifi will not turn on. HELP

Unfortunately, I think that the fact that you mentioned the presence of anti-virus software has dragged this discussion a bit off course. As you say that WebRoot has been installed for a year, while the problem just started recently (and not right after upgrading to Mavericks), I don't believe that the anti-virus software has anything to do with it.
As for what the problem might be, my best guess for something with such a sudden and unexplainable onset is a dying hard drive. Do you have backups of your data? If not, that could become a very serious problem. First priority needs to be figuring out a way to back up your data.
Once your data is backed up, check the hard drive's SMART status:
If it checks out fine (ie, says "Verified"), try repairing the hard drive with Disk Utility.

Macbook Pro 15" DVD drive only displaying certain images?

Put in the disk and it loads about half of the images on it. The rest say they are truncated or not good files. Or that I don't have permission to view them. This is happening on two Mac's that we have in the office but on a windows PC these images display fine. More info: Sometimes the images will work just fine, then they seem to stop working over time? is the drive faulty? Please help.
Processor: 2GHZ intel core i7
Memory: 4GB's
Graphics: AMD radeon HD6490M256MB
OSX 10.8.4 (12e55)

Grab a DVD Lens Cleaner disc. With lens cleaners the more brushes they have the faster/better they work and you only need to let it spin a few seconds.
This is the one I use now on all my CD/DVD hardware:
http://www.allsop.com/classic-cleaning/ultra-pro-lens-cleaner/
I've also used these and they work very well:
http://www.allsop.com/classic-cleaning/laser-lens-cleaner/

Installing Snow Leopard on MacBook Pro if DVD drive doesn't work

My superdrive is very finicky, and I don't want to risk an install with it if it decides to kick the DVD out halfway through the install. Can I connect to my iMac and install VIA firewire? I tried this today but the install seemed to stall and wouldn't progress. I had to do a hard restart which I know neither machine liked very much. Ideas? Advice?

You can connect them via Firewire cable. Both machines must be Intel models. Boot the MBP into Target Disk Mode. Boot the iMac from the OS X Installer DVD:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Proceed to the screen where you select the destination drive. Select your MBP's disk drive then click on the Option button. Select the Erase and Install option then click on the OK button. Complete your installation.
When finished Eject the MBP's disk drive from the iMac. Shut down the MBP and remove the Firewire cable.

How do i make windows to recognize my macbook pro internal dvd drive?

I am using Bootstrap and my optical and USB drives are not recognized by Windows 7. Where can I get a driver or configuration settings to fix the problem?
thx

It's Boot Camp, not bootstrap.
Did you download the Windows Support Software and burn it to a CD or copy to a Thumb Drive for later installation in Windows? And then, did you install the Support Software?

Help! Why is my Macbook Pro (Mid 2012) running slow?

I was reading previous posts and everything pointed to running and EtreCheck and posting the information. Below you will see the report that generated. Hopefully something will be found to help remedy the issue.
Problem description:
I am having the issue that my Macbook Pro is running extremely slow upon start up and when switching tasks.
EtreCheck version: 2.0.11 (98)
Report generated November 28, 2014 at 7:44:15 PM CST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2 days 21:18:32
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (277.45 GB free)
Core Storage: disk0s2 499.25 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Messages Application (/Applications/Messages.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 221.42 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 40
Oldest backup: 2014-03-13 18:42:40 +0000
Last backup: 2014-11-26 21:34:00 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
      6% WindowServer
      0% fontd
      0% Google Drive
      0% AppleSpell
      0% notifyd
Top Processes by Memory: ℹ️
309 MB firefox
94 MB Google Drive
69 MB WindowServer
64 MB Messages
56 MB mds_stores
Virtual Memory Information: ℹ️
693 MB Free RAM
1.66 GB Active RAM
984 MB Inactive RAM
788 MB Wired RAM
11.77 GB Page-ins
511 MB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My 10.6.8 macbook pro's DVD player won't play a movie from Netflix. The DVD does play on a 10.5 mb pro. So DVD is ok. Message says "not permitted" when I click play. Is there a compatibility issue? Or something else?

My 10.6.8 macbook pro's DVD player won't play a movie from Netflix. The DVD does play on a 10.5 mb pro. So DVD is ok. Message says "not permitted" when I click play. Is there a compatibility issue? Or something else?

Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry

Macbook Pro battery issues - from fully charged to 8% in under 60 mins?

Hi, I wonder if someone could point me in the right direction. Last night after fully charging my macbook pro battery in under 60 minutes it had less than 8% less. I bought this on the 1st Dec 2007 and haven't changed the battery.
I really don't know what any of the below means, but here goes:
Please help as I am no tecky.
Thank you
Catherine.
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-372d-276e
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0003
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 2509
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 2512
Health Information:
Cycle count: 154
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): -447
Voltage (mV): 12389
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes

As you are aware, batteries (no matter what manufacturer) are consumable devices and is only covered for one year (barring any type of abuse). With your purchase date being in 2007, this would not be covered under your AppleCare extended service plan.
Suggest you make an appointment for your local Apple Genius Bar and they can perform a Battery & Adapter test. You can always start the process by contacting AppleCare (1.800.APL.CARE) and log down your case number after you have completed your discussions with them, so when you get to the Genius Bar, it will save you time. At that point they will be able to determine if the battery is defective and commence the replacement process. Include your case number in the notes section of your Genius Bar appointment form. This tests will check your MagSafe adapter and battery at the same time and takes about a couple of minutes if that. Hope this helps guide you through the process.
Cheers,
Pete

Multiple issues on '09 MacBook Pro- battery, DVD drive, slowness, browsers

Similar Messages

Maybe you are looking for