Multiple issues with Bold 9650

So far, I'm not a fan of the new OS; half of the phone doesn't seem to work as well as it did prior to the update. That being said, I realize not all of it is under VZW's control...
Still, there is one issue. I'm on an unlimited data plan and, as I tried to load Twitter while at lunch today, I got a message saying: "You are currently on a service plan that does not support this application. If you want to use this application, please contact your service provider to upgrade your data plan."
I've never seen this before today, and as of 15 minutes ago, my bill is paid in full.
What gives?

Have you tried a battery pull? Remove the battery from your device, wait a few seconds then place your battery back into your device and power on. Your Blackberry will take a few moments to completely power on. Once it's on the home screen, update your device by dialing *228 option 2. Also, check the coverage map HERE to verify the coverage in your area. Please let me know if this helps!

Similar Messages

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

After installing 2014.3 my site had multiple issues with Google Chrome

After installing 2014.3 my site had multiple issues with Google Chrome. After I rebuilt the home page in 2014.3 the site is still not well. With the old software the site worked well with all the browsers and loaded incredibly. Despite Adobe's claim of a faster load with the new software it is much slower and in Chrome at times it won't load up at all.
The home page had two "Video-Animation light box galleries" by Visual pictures company. One had 12 videos, the other 3 videos. All the videos were streamed from Vimeo. There was also an Edge Animate animation in the middle of the page imported as a .oam file. the rest of the page was nothing special except using some web fonts. Again, these elements worked together well before the update.
After the update everything loads slower in all browsers and in Chrome all types of weirdness happened. Videos would play randomly, all of the audio from all the videos played as the site loaded. Videos would play in the wrong place. Instead of my animation playing a video from the galleries played in it's place instead.
I rebuilt most of the home page using a new video gallery and that helped some what but when I placed the animation.oam file in the page had new issues. To survive, I've taken the Animation out which helped but the functionality is still far from being acceptable. My boss is un my backside, other work is not getting done the stress level is through the roof because I was the one who encouraged using all these new Adobe tools (which I'm paying for personally). Now you broke it with a new update. This is not the first time I've been caught out with problems with updates. I couldn't use SpeedGrade for months following an update. ADOBE MUST VET THEIR

Sorry,
It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
Bob

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

Issue syncing Bold 9650 and Entourage Calendar using Desktop Manager

I'm trying to sync calendar items in Entourage residing on my MacBook Pro with calendar items on my BB Bold 9650 and noticed that "Entourage" is no longer offered as a calendar choice with which to sync (I've been a BB and Entourage user for 2 years and this is a new issue - Entourage used to be offered as a choice). I tried to fix by uninstalling Desktop Manager and reinstalling with newest version - no change - problem persists. Calendar items are not syncing between BB and Entourage - any idea how to fix?

My apologies hiforman.
If you click on Calendar in BlackBerry Desktop Software does it list more than 1 calendar?
Also you're saying in Contacts does it just list entourage?
Also open up iCal on the Mac, do you see an entourage calendar listed?
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

GPS Issues on Bold 9650

I've got the Bold 9650 on Verizon and have been having issues with any GPS related services over the past few weeks. I believe all of my settings are correct but every app that has the ability to use location not seem able to connect with the GPS. Google Maps will occasionally work but that's about it. BB Maps, Weatherbug, GoogleMobile app, Bing, etc, will not connect.
Any help would be much appreciated.
Thank you!

Check setting then try to access the application. Go into Options -> Advanced Options -> GPS, GPS Services can be changed to either "E911 Only" or "Location On".
Options->Advanced Options->GPS-> Location On & Enabled

Multiple Issues with iTunes on New iMac

Hello Apple Community,
I recently bought a 27" iMac with 3.1Ghz i5 processor running on Snow Leopard and finally set it up. I have owned many Macs in the past and currently have been using a 5 year old 15" MacBook Pro on Snow Leopard that has been running flawlessly but I needed something with a bit more processing power. When I first took my iMac out of the box I went ahead and used the Migration Assistant to move my applications and files over from my MacBook Pro but after multiple attempts I had to stop and simply move the music, document, and photo data on to a portable hard drive while I got the Migration Assistant to move the applications. I simply moved the old iTunes music folder over to my new iMac and replaced the iTunes folder on my iMac. The new iMac has already been authorized through my iTunes account and the music will play. Now here are my current issues.
When I play a song on iTunes, there appears to be a random amount of fade-in and/or crossfade when I switch playing songs. I have checked the playback preferences and crossfade is not checked. Some songs the crossfade will take a second while sometimes it will be as much as 10 seconds of crossfade. On my MacBook with the identical library and settings, it does not have these issues.
The other issue I have been experiencing is if iTunes has been open and my computer sits for a little while (usually after awaking from sleep or even listening to a few songs without touching the keyboard, the songs will stop playing on their own and when I press the play button, it begins to "play" the track but there is no sound coming from iTunes. I have checked the volume slider in iTunes and it is still at max volume while all other applications still work and output sound. iTunes will only work properly if I close it and re-open it.
The final issue is similar to the last one in that when I try and play previews in the iTunes Music store it will not play but when I hit the play button iTunes will then appear to be "playing" but no sound from either the store or any of my songs from the Library.
iTunes works perfectly fine on my MacBook Pro and it does have any of these issues. Both Macs are currently running iTunes 10.4.1. All songs in each library are checked and will play to a degree.
I have deleted iTunes and all corresponding library files, (basically anything with iTunes in the name) and tried to reinstall iTunes and used multiple methods to replace the music files including using Home Sharing, a portable Hard Drive, and dragging and dropping the music files from the shared folder and no matter what I try, I still cannot get iTunes on my iMac to work properly. I have been searching around the support forums for others who might have had this issue but I cannot seem to find much. Any help would be greatly appreciated!

I had not tried that before, but from your suggestion, I went ahead and did it and it seems to have gotten rid of the crossfade issues I was experiencing but whenever I try and listen to a preview in the iTunes music store it still does not appear to be working. Also, I was testing a number of tracks and it seems like there are a few tracks in particular that will make iTunes stop playing when I click on them and then if I attempt to play something else, iTunes says it is playing but no sound is coming from it.
What I have found that is interesting is the first time I ran the Disk Utility it repaired a HUGE number of misc. files. After running it and still experiencing problems I tried to run it again but this time the files were not as numerous and were all within the /Library/CoreServices menu. Each subsequent time I ran the Disk Utility and rebooted, I tried to run the Disk Utility again and the same files seem to still be having the same issues. This is just an example of one of the files I have been having an issue with.
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" .
One in particular gave me a Warning and said it could not be repaired. I'm not sure if it is important to repair but I still seem to be having some issues here and there. Here is the message from the Disk Utility regarding the file in question.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Multiple issues with apple devices.

First up is my iPhone 5. The major issue with it is that it cannot text anyone no matter what. I have reset the network settings multiple times but to no avail. I have even tried iMessage but that is only a temporary fix, as it doesnt allow me to text people without an iPhone. Secondly, it fails most of the time to connect to the 2.4GHz signal coming from my router, however, the 5GHz signal is proving to have much better results, but i cannot connect to it at all times, as the 5GHz signal cannot reach my room.
The second issue is my iPad 2. This device straight up wont connect to either signal, despite not only a network reset, but many factory resets.
I have heard of other devices in my house not having a great connection, namely my mothers MacBook Pro, but this is only the case with apple devices.
I am fairly certain my iPhone is under warranty, so is it possible to get a replacement, or will the current one be fixed.
Any insight or advice is greatly appreciated.

RoyalRice wrote:
I am fairly certain my iPhone is under warranty, so is it possible to get a replacement, or will the current one be fixed.
Any insight or advice is greatly appreciated.
Did you reset the router? Is the wifi signal coming from the router? Since multiple devices are having problems connecting to your wifi, the problem might be there and not on the devices.
I would check that first. If that does not solve the problem, then take the iPhone to an Apple store or authorized service center.

Multiple issues with Nokia Lumia 920

I bought my NL920 about one month ago (Telstra). It had been working flawlessly up until a few days ago.
The first issue I noticed was the back, start and search buttons were no longer being illuminated, no matter what. I tried multiple soft resets to no success. I just left it, thinking nothing of the problem.
A day or so after I noticed the issue with the backlight, two more strange things began to occur:
Tilt doesn't work at all. The screen doesn't rotate when the phone is flipped, and it doesn't seem to recognise tilting whatsoever (noticed this when I attempted to play Doodle Jump).
And second issue is apps are crashing as soon as they are launched. This doesn't happen with every app on the phone, but it occurs while trying to use some of my most used apps (Facebook and Camera are the main ones). I can't launch the camera app at all, and the side button doesn't work either.
I tried a hard reset in an attempt to resolve these issues, but all three issues are not fixed at all.
I have no idea what to do now. I've never dropped the phone, it's always been look after well. I am 99.9% sure it isn't something physical.
These issues all seem to have came after updating some apps (Extras & Info was one of them I believe). Could that be the problem?
Swapping the phone for a new one would be a last resort.
Thanks in advance for any help!
Solved!
Go to Solution.

I just reset it, didn't work unfortunately. Looks like I'm going to have to replace it.
Would I just have to take it to my Telstra shop and let them deal with it? Or can I send it to Nokia directly?
Thank you.

Multiple issues with Creative Cloud File Syncing

I'm have issues with syncing files on my mac to Adobe Creative Cloud. I don't seem to have issues syncing via drag and drop to my web browser. I keep getting this error while syncing via finder:
I also have a fairly complex PSD with folders that i'm toggling on and off using Layer Comps. I don't see any difference when switching Layer Comps within Extract in the browser. I do see the changes when turning on and off the folders though.. What's the deal with that?
Why does it take so long to render the PSD after I turn on a folder or switch layer comps? It takes about 30 seconds to re-render, which is crippling for our workflow.
This would be an amazing tool for our developers if these 3 issues were resolved.

Thanks for the information.
Could you now send me some log files please..
The log files can be found here:
Mac: /Users/<yourusername>/Library/Application Support/Adobe/CoreSync/
Windows: C:\Users\<yourusername>\AppData\Roaming\Adobe\CoreSync\
The logs have the date in the filename, like "CoreSync-2014-03-25.log". Please compress (zip) all the CoreSync-2014-MM-DD.log files and email them to me directly at [email protected]
Thanks
Warner

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

Multiple Issues with HTC 8X and Verizon Doesn't Care

I have had this phone for three months and had this issue the whole time. Searched Verizon and Windows forums and found the same thing. Only Verizon HTC 8X having this issue. On top of that I am now having hardware issues. Phone SIM not showing up as connected and have to restart or re-seat the SIM. Battery life has gone down drastically. Overnight charge gets me 11 hours tops without using my Data plan with WIFI off and other major apps closed out. Shouldn't have to do that to utilize features on a smart phone. As soon as I begin using my data plan the 11 hours is cut in half. Not to mention if I use the phone for GPS navigation it gets drained in 30 minutes to and hour. Then the software is now freezing. Either freezes completly and have to restart or applications i try to open, stall and then go back to the start menu. I have to then power off the phone which freezes and 15 minutes later powers off. 3 months into the phones contract. Ridiculous. Bought from Letstalk.com and they told me I am SOL. 14 days for return and 30 for exchange. Go see HTC. HTC says i'm SOL. Go to Verizon and get a new SIM. Factory Reset the device as well. If that doesn't help, ship it to us and we will repair. Are you kidding. I am a consultant for a major merger and acquisition company that deals with infrastructure practices all day. Send you my phone for repair on a 3 month old phone. Are you kidding me. Finally talked to Verizon. They are not consciously aware of the HTC 8x missed call three beep scenario when it has been on there forums since December of this year. With all my issues they told me I'm SOL. I don't want to send it in for repair. That is ridiculous. What will that solve. A couple of the issues. What about the three beep issue the has plagued me for months. A refurbished of a different model from two years ago, no thanks. I received a new phone three months ago. So you wanna make it my fault and tell me here take an iphone 4 from two years ago from 300 dollars. I am furious with this and want to proceed with making sure this lack of decent service for an issue like this is resolved and others don't have to face this type of treatment. I paid good money for a smartphone with reliable service. So far i'm being told to bend over and take it from everyone. I feel that the three beep issue alone is a breach of the contract I have with Verizon and I should be able to constitute that right and terminate this disease.

Hello,
I received my new "reconditioned" phone to replace my 6 month old Droid 4.
The replacement phone only holds a charge for 6 hours or so, with minimal
use (no internet).
I am VERY unhappy. I left a message with the store employee who helped me
activate the replacement
phone, but have not heard back. This is really disappointing. I paid a lot
of money AND signed an additional
2 year contract in order to purchase my Droid 4. Now I am stuck with a piece
of junk phone as is my other
employee who has a replaced Droid 4 as well. The store even told me they had
"issues" with this model (battery completely died on my phone 619-XXX-XXXX
as well as on 760-XXX-XXXX).
We concluded that when both our Droid 4 phones died within a couple of
months of each other.
AT the very least, we should have our phones replaced with new, so they can
at least hold a charge and be used for
our business as the purpose they were purchased for.
I would think making this right, since this is quite obviously NOT our fault
would be clear if you expect to retain customers.
Lisa <Personal information removed for privacy per the Verizon Wireless Terms of Service.>
Message was edited by: Verizon Moderator

Multiple issues with my iPhone 3GS since 4.1; can anyone help?

Hi,
I have an iPhone 3GS 16GB which I love very much. Vital Statistics are:
Version: 4.1 (8B117)
Carrier: Voda AU 8.0
Model: MC132X
Modem Firmware: 05.14.02
I bought it through Vodafone Australia in January this year. It’s been brilliant, it is this device which convinced me Apple sold brilliant gear, and greatly influenced me to buy my iMac 27", 17" Macbook Pro, Airport Extreme, and Time Capsule.
I am a Senior Test Analyst with telco experience in all of Australia’s mobile phone operators (3, Vodafone, Optus, and Telstra). I now work for a global media company, and depend on my iPhone for phonecalls, emails, internet, getting access to my share trading platform, banking apps, calendar, etc.
I went to Germany for 2 months, and I bought the unlock from my carrier, Vodafone Australia, so I could use a usim from Vodafone DE in Germany. Vodafone’s instructions were that in order to apply the unlock, I had to connect my iPhone to iTunes, where it would download an update from Apple and unlock my phone.
I performed the upgrade to 4.1, which was a completely clean install after backing everything up.
Unfortunately, after upgrading from 3.1.3 to 4.1 I am having no end of issues with my trusty (once) 3GS.
Issues I am currently encountering:
1. Dropped calls. Both in Germany, and in Australia, my iPhone is dropping calls at a rate it has never, ever done before. 1 out of ever 2-3 calls is being dropped. The voice quality is also degraded over what I remember it being (both in AU and DE), and I’m getting ‘squawks’ and ‘screeches’ in the middle of my conversations which I never had prior to upgrading.
2. Signal strength is very poor. Before I upgraded to 4.1, I was able to make and receive phonecalls at my desk at work (right in the heart of Sydney’s CBD, right next to Hyde Park.) without issue. I was able to walk in between my company’s offices in the CBD and talk the whole way without problem. Now, I get 1 bar at my desk, and I’m lucky if I can make a phonecall 50% of the time there. I can no longer receive the volume of calls that I used to at my desk either. Walking between offices sees my phone calls drop EVERY TIME now. At home, with 3.1.3, I had no problem with reception. Now, I drop calls inside my house on a regular basis, and I often don’t have enough signal to make calls at home where prior I had no issues. My younger brother, who bought an iPhone 3GS on the same day I did, from the same Vodafone store, at the same time, is still on 3.1.2. He has no problems with reception in the house at all. He walks around taunting me holding phonecalls without issue.
3. Internet performance has been devastated. Whereas my google maps, email, and internet access used to be fast and crisp, now it is slow and haphazard. I am also seeing the 3G symbol disappear and be replaced by an E symbol, and my phone seems to have difficulty staying on the 3G network. My brother, standing right next to me, does not have these problems. Once again, my brother’s iPhone 3GS on 3.1.2 does not have any internet problems when he is using his iPhone right beside me. We are on the same carrier (Vodafone AU), on the same plan.
4. My iPhone battery life has been dramatically reduced. Whereas I used to be able to use it for almost a full day, with minor top ups when it got really busy, now my battery life vanishes before my eyes in half the time. This is with the device simply not being up to the task of performing the workload it used to!
5. My iphone locks up, and crashes at random times, and I’ve been having to hard-reset it on occasion.
6. My iPhone is far slower than it used to be. I’ve compared it to my brother’s identical 3GS on 3.1.2, and his phone flies in comparison to mine! Opening my SMS’s, email client, and internet browser is painfully slow.
7. When calling a number, often my iPhone ‘waits’ for 20-30 seconds at the ‘calling mobile’ screen before I hear any tone from the phone indicating that it’s making the phone call. This never happened when it was running 3.1.3. This never happens on my brother’s identical 3GS.
8. My wireless performance has decreased. I have run bandwidth tests through my wireless router numerous times from www.speedtest.net, and compared them with my brother’s results performed right before and right after mine. I’ve run this test against my brother’s 3GS more than enough times to form a statistical picture. On the whole, my wireless performance is around 10-15% worse than his 3GS.
I work in the telco industry. I regularly chat with the radio engineers who fix up blackspots in 3G coverage for Telstra and 3 Australia. I know that the excuse offered, that of the iPhone software correctly reporting the signal now and not before is absolute rubbish. My 3GS used to work at my desk, between my offices, and at home flawlessly. It crawls along now, and it does not get the reception signal quality it used to.
I have wiped my iPhone several times now. I have put it into DFU mode and totally, cleanly installed the 4.1 software. I have done this 4 times now.
The clean installs have not fixed the issues above.
I would like to know what my options are for fixing these issues?
The prime questions I have are:
1. How can I roll back this accursed update?
2. Why would Apple release a software update(s) that hasn't been tested, and dramatically negatively impacts my beloved 3GS?
3. How can I get my brilliant 3GS +*back to the way it was*+!?!?
I’m very, very disappointed. And to be honest, the simple fact I’m taking the time out of my busy day to write this post means I’m very angry as well.
I know the problem with my 3GS *is not a hardware issue*. It's a software issue, and I'd like to know how I can get my old, fast, reliable, brilliant 3GS back.
Regards,
-J

The picture you show is normal. If you lightly double tap home button it activates reach ability mode for one handed operation. Nothing is wrong there. Another light double tap returns it to full screen. Do not press, just light touch the home button. AAs far as the other issues check the in call volume or ringer volume as it happens, just a possibility. as far as the banner not displayed on lock screen, as far as I know you need to have notifications set to alerts not banners in order for them to show up on the lock screen.

Multiple Issues with my Macbook Pro

Jan 2011- Received my Macbook Pro 15 inch (late 2011 version)
Feb 2011- Overheating issue, laptop started running very slowly without any applications open
Feb 2011- Sent it to Apple US, test was run, no issue found by Apple, they re-installed the OS, piece returned back, seemed to be running normally
Early 2012- Major battery issue, battery would suddenly drop down from 90% to 25% in 5 minutes with hardly any applications open
From late 2012 to present- When the laptop is put to sleep (with screen closed) and is opened after half an hour or longer, the mouse cursor remains stuck on the screen after waking it up. The only way to continue using the laptop is to restart it so that the mouse starts moving again. Every time the laptop is woken up after sleep mode, the speed of all running applications comes down noticeably.
Mid 2013- Replaced the Battery for Rs. 8000/- After using it just for two years
Late 2013- Laptop fan runs at a high speed even though there are no applications open on the system, suspected Temperature sensor issue, Activity monitor shows a particular kernel that is taking up a huge amount of CPU load.
I have only faced issues with my macbook pro and it still doesn't end,Is there any way I can ask for an out of warranty replacement or atleast if there is a permanent solution at an affordable cost? Apple as a brand has set a benchmark , it is only fitting that as loyal apple customers we expect products to exceed expectations in terms of performance and longeivity and not pose as a problem at every turn.There isn't any sense in going on spending on a laptop that costs a bomb already!!!

While you were on the warranty or if you still have it, you should check out the Apple Store. When you had noticed these problems earlier, you should have immediatly reacted upon them, rather than waiting.

Multiple issues with Safari

As of this morning my Safari appears to be performing faster, although not consistently; however, youtube will load but cannot view videos, news video will not load, and I cannot listen to the radio via my computer (no streamming). Any assistance is appreciated.

If you are having problems playing MPEG4 video in Quicktime 7.4 (and Apple are aware that some users have had such problems) you should carefully check in
/Library/Quicktime and
/Library/Internet Plug-ins and
Home/Library/Quicktime
to check whether you have any third party plug-ins that are not completely up to date.
Current versions of Flip4Mac and DiVX and Perian do NOT cause failure alone or in combination. However the one SPECIFIC extension that ALWAYS causes the failure alone or in groups is 3ivxMediaImp. All other 3ivx extensions DO work. Remove only that ONE SPECIFIC extension.
Please try this and see if it fixes your problem with QT Player, the QT Firefox Plugin, and iTunes not playing MPEG4 files (including mp4 files).
Older 3ivx and DivX components are often incompatible with new QuickTime versions and are, in many cases, obviated by component packs like Perian.
This is not the only explanation for issues with MPEG4 file playback in QuickTime 7.4 and later, however. The issue with some videos from YouTube, democracynow.org and others, for instance, is the result of that content not complying with MPEG4 standards (namely that they use bogus track dimensions). QuickTime had previously ignored invalid track dimensions but this was changed in order to support properly authored anamorphic content.
The recent update to QT 7.4.1 has fixed a number of issues but some problems are unavoidable when working with non-standards compliant content. The standards are important for many reasons including keeping hackers from manipulating improperly coded web pages.
However, there is a workaround (also the basis for why those files will still play in iTunes): there are a few ways to trick QuickTime into ignoring the invalid track data. For instance, rename the files .3GP and they'll show up just fine.
Post back if you want a list of the plug-ins you should have in order to play pretty much anything in Quicktime.

Multiple issues with Bold 9650

Similar Messages

Maybe you are looking for