Multiple jpgs into one pdf

While I wait for my iWorks to come through the mail, I thought to get a head-start on what I would like to accomplish with iWOrks. Until I get the manual to read here goes...
I have three large size jppgs (674x850 px) and I want to create one pdf file with each jpg as one page. I read this was possible and want to get the specifics on how.
Thanks

I printed the first page of the PDF to my color laser printer & it is somewhat fuzzy. The text is better than the pictures, but close up the white on gray text is not as clear as it could be. I think that, as Barbara says, a big part of the problem is the JPEGs themselves. JPEG is a "lossy" format & most graphics programs will reduce the output each time you save it as a different name unless you tell it differently. In my experience I get better results in Pages using TIFFs or PDFs I have saved from GraphicConverter. Even the files I have saved as PICT over the years (because this is the best format for AppleWorks), do better than JPEG.
I'm not sure how you did the text, but if it were just white or yellow text with a gray paragraph fill, I wouldn't expect the poor quality I see.

Similar Messages

  • How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

    My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
    I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
    When I clicked the Save button it showed the page that I scanned and showed 1/1.  On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
    Not to mention HP's Customer Support is useless!
    I'd appreciate any help I can get with this problem.
    Thanks,
    Mark

    Hi BH,
    I see your diagram.  I just scanned something.  The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram.  The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram.  I can't see the plus sign because it is not there.
    I tried re-installing the software and drivers as you suggested but that did not have any affect.
    Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
    I've noticed that on HP's support forum web page there is only 1 solved request for assistance.  That doesn't give me much confidence in HP.
    Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
    If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
    Thanks,
    Mark  

  • How do I scan multiple pages into one pdf file using the PIXMA MG7520 on Windows 8.0? Please help!

    I recently received a PIXMA MG7520 for a gift.  It works great with my lenovo laptop/tablet running on Windos 8.0.  The one drawback to the HP all-in-one that it replaced is it does not have an ADF.  That being said, there must be some way to scan multiple pages into one pdf file.  I need help figuring thing out.  Thanks in advance!
    Solved!
    Go to Solution.

    Hi mdtolbert54,
    There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document.  To do this, please follow these steps:
    1. On your keyboard, press the Windows key.
    2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
    3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
    4. Click the DOCUMENT SCAN option on the left pane of the window.
    5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
    a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
    b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option. 
    c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
    6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
    7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
    If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
    Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
    Hope this helps!
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do i scan multiple pages into one pdf file

    How do I scan multiple pages into one pdf file?

    That depends on your scanning software. Adobe Reader doesn't scan.

  • How to merge multiple files into one pdf

    I would like help with this task. If I could do this for free I woul actually be more likely to follow advice. Many thanks

    Hi Lauravill,
    The free Adobe Reader cannot help you with the merging job. If you have Acrobat Reader then you can merge files into one pdf with the following steps-
    Within Acrobat XI, select File > Create > Combine Files into a Single PDF.
    Click Add Files and select the files you want to add.
    Click, drag, and drop to reorder the files and pages. Double-click on a file to expand and rearrange individual pages. Press the Delete key to remove unwanted content.
    When finished arranging the files, click Combine Files.
    Select File > Save As > PDF.
    Name your PDF file and click Save.
    Let us know if you face any problemwith this or need extra support.
    Thanks
    -Satyadev

  • PSC 1210 Mac OS 10.6 Scan multiple pages into one pdf., and ink levels

    Now that I upgraded my Mac OS to Snow Leopard (10.6.8), I have needed to scan on my HP all-in-one psc 1210 either from Preview or from Scan & Fax in System Preferences. Once I scan a page and that page opens up, I AM able to scan additional pages, but each becomes a separate document. The only system driver available from HP is print only and also doesn't include a utility to check ink levels. Can someone help me with these two issues? (1) how to scan multiple pages into a single pdf. doc with my configuration, and (2) how can I check ink levels
    This question was solved.
    View Solution.

    Hi C_Maier,
    I can not see the available options when it is disconnected. A screenshot when it is connected would be best. I have done some research though, and believe the option to select 'save all pages to a single file' may only be available if your printer has a document feeder, and of course as you know, yours does not
    I know with 10.7 and higher the option is there even with flat bed only printers. You might consider upgrading the OS.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Programs to convert multiple jpgs to one Pdf ?

    I need to convert photos (jpgs) (which I take from books with my digital camera) into to a single pdf. file.
    Is there an reasonably priced program for that ? I saw some on Amazon .. and I am not sure which would be the best for me.
    I don't want to pay more than about $100 for this.
    Can anyone recommend a good program that I can purchase (on Amazon ? or elsewhere) to perform this function.
    My IMac 27 In. is 10.9.4. 
    I look forward to hearing from anyone who has experience in this area.
    Don

    Why don't you use Preview?
    Open the first picture with Preview. Export it as PDF.
    Open the new exported PDF file, toggle the thumbnail view. Drag & drop the rest of the pictures you want to add onto the thumbnail.
    You can rearrange the picture sequence as you want.
    Straightforward and free

  • How do I scan multiple pages into one pdf?

    I have been using the "System Preferences" -> "Print and Scan" -> then I select the "open scanner" button for my printer.  When I first used this feature, it would scan multi-page documents into a single PDF, but it has stopped for some reason.  It is doing this both at home and at work.  Any suggestions?
    Thank you!

    In Image Capture when you choose PDF Format you can also enable combine into single document

  • Combining Multiple Files Into One PDF

    When I try to combine MS Word or PDF files, I receive an unexpected error occurred please try again later message.  How do I combine the files?

    Hi Fishcpa,
    I apologize for the inconvenience.  I think you were taking correct steps to combine those Word and PDF files, but  it seems that the process encoutered either a time out or the server was busy.  Please try again and let us know if you still have the same issue.
    FYI how to combine files:
    1. Login to https://createpdf.acrobat.com/signin.html with your Adobe ID and password
    2. Select "Combine Files" tool from right pane
    3. Click "Select Files" then select all files that you like to combine(up to 12 files)
    4. Name the combined file and click "Combine" button
    5. Click "Download" from progress bar
    6. You can view the combined PDF file in Reader on your desktop
    Thank you.
    Hisami

  • How to merge multiple spools in one PDF

    hi all,
    i have a requirement to merge multiple spools into one PDF.
    I have the code to merge 2 spools into one PDF but acc to my requirement this number can be any( say 100). hence i need  help to merge N number of spools in one PDF.
    Regards
    geeta gupta

    Take the data of all spools into a internal table then create a new spool with this data then downlad this data into pdf format.
    By this method you can download any number of spools into a single pdf file. Please see the below code
    Fetch spool number
    Select rqident from tsp01 into table g_t_data
    where...............
    Read sool data and take this data into a internal table
    Loop at g_t_data.
               Call program to read spool as follows
          SUBMIT rspolst2 EXPORTING LIST TO MEMORY AND RETURN
          WITH rqident = g_t_data-rqident
          WITH first = '1'
          Read memory where spool data is stored
          CALL FUNCTION 'LIST_FROM_MEMORY'
               TABLES
                    listobject = mem_tab
          Convert spool data to Ascii
          IF NOT mem_tab[] IS INITIAL.
            CALL FUNCTION 'LIST_TO_ASCI'
                 EXPORTING
                      list_index         = -1
                 TABLES
                      listasci           = g_t_text1(table type c length 10000)
                      listobject         = mem_tab(LIKE TABLE OF abaplist)
            APPEND LINES OF g_t_text1 TO g_t_text.
          ENDIF.
    ENDLOOP.
    Create new spool with internal table data
      NEW-PAGE PRINT ON
      KEEP IN SPOOL  l_keep(variable type c default u2018Xu2019)
      LINE-SIZE      300  
      LIST NAME      l_list (variable(30) TYPE c default 'combined_pdf')
      NO DIALOG.
      LOOP AT g_t_text.
        WRITE: g_t_text-data.
      ENDLOOP.
      NEW-PAGE PRINT OFF.
      COMMIT WORK.
    Fetch this spool number from TSP01
    SELECT rqident rqcretime FROM tsp01 INTO TABLE l_t_pdf(internal table having two fields rqident LIKE tsp01-rqident and rqcretime LIKE tsp01-rqcretime)
      WHERE   rqowner = sy-uname AND
                     rq2name = 'COMBINED_PDF'.
    Download spool data into pdf format
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid   = l_t_pdf-rqident
           IMPORTING
                pdf_bytecount = l_size(variable type i)
           TABLES
                pdf           = g_pdf(table like table of tline)
      CALL FUNCTION 'GUI_DOWNLOAD'
           EXPORTING
                bin_filesize = l_size  "size
                filename     = l_data
                filetype     = 'BIN'
           TABLES
                data_tab     = g_pdf.
    Hope this will help you.

  • Converting multiple msft files into one pdf

    HELP - i am using adobe acrobat 9 pro for macs (Mac OS X 10.6.3). when we had a pc, we were able to convert multiple files (microsoft office) to a single pdf at once without first converting them all to pdf. when I attempt this using the same technique, the images for all documents other than pdf files are greyed out and it seems that word/office documents are not a supported format for the conversion of multiple files (not listed in drop down menu) into one pdf.
    I would greatly appreciate help with this. we are business users who are new to macs. we need to do a lot of this and are getting so frustrated. Thanks in advance!

    Hi mephisto11757,
    You can convert the following file types to PDF with the Adobe CreatePDF service:
    Adobe Creative Suite® file formats Examples include: .psd, .ai, .indd
    Microsoft Word (2000, XP, 2003, 2007, 2010, & 2011) .doc, .docx
    Microsoft Excel (2000, XP, 2003, 2007, 2010, & 2011) .xls, .xlsx
    Microsoft PowerPoint (2000, XP, 2003, 2007, 2010, & 2011) .ppt, .pptx
    Microsoft Publisher (2000, XP, 2003, 2007, 2010, & 2011) .pub
    Text Files .txt
    Rich Text Format .rtf
    Adobe PostScript .ps
    OpenOffice Format .odt
    Star Office .sxw, .sxi, .sxc, .sxd, .stw
    Corel WordPerfect .wpd
    Image file formats .gif, .png, .jpg, .bmp, .tiff
    Regards,
    Florence

  • How to create a multiple PDF-form outputs into one PDF?

    Hi,
    I`d like to create a PDF document with a few pages in it, build from different PDF-forms using many form-function calls. Where each PDF-form can use its own interface.
    I`ve made a simple programme, but as the result I have a few separated documents with scrolling tab instead of one document with all pages in it.
    What am I doing wrong?
    *& Report  ZZ_TEST_PDF_MULTY
    REPORT  zz_test_pdf_multy.
    PARAMETERS:
      p_page TYPE i DEFAULT 2,
      p_row TYPE i DEFAULT 4.
    END-OF-SELECTION.
      DATA:
        tb_itf TYPE tsftext,
        s_itf TYPE tline.
      DATA:
        c_fmname TYPE rs38l_fnam,
        s_outputparams TYPE sfpoutputparams,
        s_docparams TYPE sfpdocparams,
        s_formoutput TYPE fpformoutput,
        s_sfpjoboutput TYPE sfpjoboutput,
        c_page TYPE string,
        c_row TYPE string.
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'FP_TEST_00'
        IMPORTING
          e_funcname = c_fmname.
      s_outputparams-nodialog = 'X'.
      s_outputparams-device   = 'PRINTER'.
      s_outputparams-preview  = 'X'.
      s_outputparams-dest     = 'PDF'.
      s_outputparams-getpdf   = ' '.
      s_outputparams-title    = sy-title.
    *  s_outputparams-bumode   = 'M'.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = s_outputparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          OTHERS          = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      s_docparams-langu   = 'R'.
      s_docparams-country = 'RU'.
      DO p_page TIMES.
        MOVE sy-index TO c_page.
        REFRESH tb_itf.
        DO p_row TIMES.
          MOVE sy-index TO c_row.
          c_row = sy-index.
          CONCATENATE
              'page' c_page 'row' c_row
            INTO s_itf-tdline SEPARATED BY space.
          APPEND s_itf TO tb_itf.
        ENDDO.
        CALL FUNCTION c_fmname
          EXPORTING
            /1bcdwb/docparams  = s_docparams
            textlines          = tb_itf
          IMPORTING
            /1bcdwb/formoutput = s_formoutput
          EXCEPTIONS
            usage_error        = 1
            system_error       = 2
            internal_error     = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDDO.
      CALL FUNCTION 'FP_JOB_CLOSE'
        IMPORTING
          e_result       = s_sfpjoboutput
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.

    Sorry, but making single PDF from many smartforms is not what I want to achieve. I wold like to know how to get one PDF document made by ALC-forms.
    In my example I have many PDF documents. So, how to get (or put) them all in one PDF?
    ps: the way to get one PDF from smartforms is also here:
    "Combining Multiple Smartform Outputs Into One PDF file"
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450

  • I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

    I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

    Pat:
    Below is a copy of an 8/7/2013 email from adobe. I prepaid a one-year subscription, and, until I recently upgraded to Windows 8, I was able to make several dozens of merged pdf documents. I seem to be no longer able to use the merge feature that I had successfully and repeated used. When I search for the merge feature I end up with a request that I pay for an upgrade monthly subscription to use the merge feature.
    Tom
    =================================here follows my subscription email====================================================
    Welcome to Adobe ExportPDF
    2 messages
    [email protected] <[email protected]>
    Wed, Aug 7, 2013 at 1:01 PM
    Reply-To: [email protected]
    To: [email protected]
    Dear Thomas Corr,
    Thank you for purchasing a subscription for Adobe ExportPDF.
    Sign-in to export a PDF Now >>
    With your subscription you can:
    Enjoy unlimited online conversions from PDF to Word (DOCX).
    Make scanned text editable.
    Maintain page, paragraph, and font attributes.
    Preserve tables, images, and multi-column text.
    Export PDF comments to Word.
    Help and feedback
    Get help from Adobe on the Support Center.
    The Adobe ExportPDF Team

  • Multiple Word 2007 docs into one PDF version 6

    Hello to everyone,
    I am a newbie to this.  I did check some of the most recent posts but didn't find anything that fit my issue.  I have an end-user here that is running Office 2007 SP2 and running Adobe Acrobat V6.  He used to be able to select multiple word documents and make them into one pdf by right clicking on them and selecting that process.  After we upgraded him to Word 2007 it stopped working.  He is still able to select multiple word documents and right click to add them to one PDF but what comes up in word is garbled and nothing else seems to happen ( the process tends to halt and do nothing).
    Any help would be greatly appreciated.
    Thanks in advance,
    Susie

    For the software combination the person now has, PDFs can only be created by opening the application and using the Print function to print to the Adobe PDF printer. In the past you were depending on PDF Maker interacting with WORD to create the PDF when opening in Acrobat. With the upgrade to WORD 2007, your current PDF Maker will not work and thus you can only print.
    If your creation process is critical, you have no choice but to upgrade to AA9 to obtain the compatibility for OFFICE 2007. OFFICE 2003 did not even exist at the time AA6 was released as I recall. Your office updates have made other software imcompatible - a MS issue if you wish.

  • How do I combine multiple single pdf's into one pdf document w/ multiple pages?

    How do you combine multiple single page pdf's into one pdf document w/ multiple pages?

    Hi Sandra,
    You have ExportPDF subscription from Adobe which would not combine files for you. It is only used to convert PDF into different formats.
    For Combining PDF you might to purchase the different subscription : PDF Pack
    Let me know if you have any other question
    Regards,
    ~Pranav

Maybe you are looking for