Multiple kinect V2's where there field of views dont overlap.
I know that similar questions like this have been asked before so bear with me. I want to get 2 kinect V2 sensors running on one PC. These 2 Kinect v2 sensors will be mounted on the same machine but one sensor will monitor the infeed
of the machine and one will monitor the outfeed. Then each PC will pass depth data to a PLC over ethernet for processing. It seems a waste to have 2 PC's running when I know that 1 PC can handle the info from both sensors. The sensors
will be looking in oppsite directions so the depth data coming from each sensor should be clear. Any ideas?
I know that similar questions like this have been asked before so bear with me. I want to get 2 kinect V2 sensors running on one PC. These 2 Kinect v2 sensors will be mounted on the same machine but one sensor will monitor the infeed
of the machine and one will monitor the outfeed. Then each PC will pass depth data to a PLC over ethernet for processing. It seems a waste to have 2 PC's running when I know that 1 PC can handle the info from both sensors. The sensors
will be looking in oppsite directions so the depth data coming from each sensor should be clear. Any ideas?
This might solve your problem when it gets released
http://brekel.com/multikinectv2/
Though you need a PC for each connect
Similar Messages
-
Dear All HANA Studio Experts,
I'm using SAP HANA Studio Version: 1.0.68 in our current landscape and looking for a expert and intelligent solution for a problem that we have encountered recently.
We have created multiple AT views, AN views and created CA views on top of these AN views to cater different LOB related to our organization. We have also designed BO universe on top of the CA views from HANA and finally created webi reports out of these universes.
In a particular scenario, we have one AT view which is been used by 10 different AN views.
Now we had 3 Requirements like below:
1. To add a new field in this AT view,
2. To update an existing field in this AT view and
3. To remove a field from this AT view which is not required anymore.
Problems Encountered:
Req 1. When we added a new field (e.g. XX_ADD) in the AT view and activate it, its throwing warning that there are dependent objects on this AT view. However no error thrown and it leads to re-work to check if this new field is available in all those dependent views and re-deployed those all.
Question: How to ensure if this addition of object will not impact the rest of the dependent views?
Req 2. When we updated an existing field (e.g. XX_UPDATE_NEW) in the AT view and activate it, its throwing warning that there are dependent objects on this AT view. However the BO reports built on top of these different dependent AN views became inoperative.
Question: How to ensure if we need to update the name of an existing object it will not impact the rest of the dependent AN views?
Req 3. Finally we have removed one object from the existing fields as it is not required. Again we faced warnings that there are dependent AN views on this AT view.
Question: How to ensure if we need to delete an existing object, it will automatically reflect in all dependent AN views?
Please suggest, if it is a good practice to create separate AT,AN and CA views for each of the LOB's and avoiding any dependent views (hence gradually the total no. of logical objects will be increase) or to reuse the AT/AN views whenever possible and in case of any updation/deletion we need to do a huge rework to check and redeploy the dependent objects again and again?
Thanks for reading this detailed explanation and please let me know in case you need any other inputs....don't hesitate to share your expert thoughts on this.Hi Avishek,
Are you using Development or Modeller Prespective?
Avishek Chakraborty wrote:
Now we had 3 Requirements like below:
1. To add a new field in this AT view,
2. To update an existing field in this AT view and
3. To remove a field from this AT view which is not required anymore.
1) Adding a new Field in the AT View and after activating the view. Then you have to Refresh/Check out the dependent views to see if it is reflecting.
2) We cannot update the existing field in the AT view i.e like name change if it is being already used in joins in any of the dependent views. It will not allow you to activate
3) To remove the field which is not being used any where, we can make the changes in AT View and Refresh/Check out to see if the dependent views are reflecting the change
Regards,
Krishna Tangudu -
I am using Measurement and Automation Explorer Version 3.1.1.3003 to view pictures on a pc that are being sent from a video camera looking through a microscope. The image I see in the viewfinder of the microscope is MUCH smaller than the image that is displayed on the pc screen. Looking through the viewfinder of the microscope, I can see ~20 mm across the object, but the display from the camera in NI-MAX shows ~4.5 mm across the object. How can I change how much of an object is displayed on the screen in NI-MAX?
The camera is attached to the microscope with a camera adapter on the top of the microscope. The lenses the camera "looks" through and the lenses used when one looks through the viewfinder are the same, so theoretically, there should be no difference in what is displayed on the pc and what is seen through the viewfinder. We have ruled out the microscope and camera as the cause of the problem, which narrows it down to the NI-MAX software itself.
I saw in the forums that you can zoom out on an image; however, this does not change the distance across an image that is seen, just makes the picture of the same ~4.5 mm across the object smaller in size.
Any ideas or suggestions?I have attached a picture of the object's image being displayed on the pc monitor. Where the field of view (FOV) in the microscope is almost 30 mm, the FOV displayed onscreen is about 7 mm. After contacting companies various times I discovered there was a reducing lens that goes in the C-mount adaptor, but it is over $300.
I thought maybe that the FOV could be changed in in NI Measurement and Automation Exploer (NI-MAX). Any ideas?
Attachments:
field of view.png 2437 KB -
Is there a way to create forms where certain fields would become required only if there was a certain choice made in a dropdown box in another field?
Yes but you will have to create some custom JavaScript to do this.
Also you should be aware that the "Required" property is only processed when the form is submitted to a scripted web page or "mailto:" process. -
Multiple select options for an input field
Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya. -
Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?
check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer
-
How to set a uniform display size of multiple intermedia image types - wher
I have read "If you want to limit the size of the file that can be uploaded, you can do this as a post generation
step, by adding the maxFileSize property to the <controller> element in the struts-config:
This does not address how to limit the *** display size *** where you have multiple intermedia image types - where the original size is not uniform.
If an image is uploaded where the true image display size is 1024 x 768 - it will display that way in the table/table-form. This will create un-even display size's where previous images sizes where different 384 x 384 and so on.
Is there a way to encode the display size so that *** ALL *** images regardless of their true size are displayed uniformly at least on one dimension (64 x ???)? This is possible when using products such as Dreamweaver or Flash.
BTW - JHS/***JDev*** synergy is truely magnificient!!! Way-To-Go Oracle!!!!!!!!!!! Keep it up!!!!
BG...Bill,
I did some tests, and was able to reproduce it. The problem is that JHeadstart distinguishes between display types fileDownload and image, but UIX uses the same <media> tag to handle both display types. It will look at runtime whether it must render a hyperlink to download the document, or to render it right away as an image.
To get all images the same size, you can set the display width and height, AND the display type must be set to image.
However, to get the file name used as download link, you must set the FileName attribute AND the display type must be set to "fileDownload" ..
So, to solve your problem, it is easiest to set the displayType to "fileDownload" and set the width and height properties post-generation in the generated UIX page.
In the next release of Jheadstart, we will fix this, and always pick up width, height and fileName settings regardless of the display type.
Note that you should also set the FileName property against the attribute you are using to upload the file.
Steven Davelaar,
JHeadstart Team. -
PROBLEM TRANSFERRING MULTIPLE DATA ENTRIES FOR ONE KEY-FIELD.
DEAR EXPERTS ,
I HAVE TRANSFERRED DATA FROM THE FINAL INTERNAL TABLE OF MY ABAP REPORT (NOT ALV) TO CUSTOM Z-TABLE CREATED IN SE11.
BUT MY PROBLEM IS : I COULD NOT TRANSFER MULTIPLE DATA ENTRIES FOR A PARTICULAR FIELD.
FOR EXAMPLE : IN TABLE EKKO THERE ARE FOUR EBELN-4900006375 AND FOR THAT DIFFERENT EBELP S ARE
PRESENT. I COULD TRANSFER ONLY THE FIRST ENTRY , THAT IS : EBELN - 4900006375 AND EBELP - 0010,
AFTER THAT THE ZTABLE IS NOT GETTING UPDATED TO EBELN-4900006375 FOR EBELP - 0020 AND SO ON.
I HAVE TRIED ALL THE ' MODIFY, INSERT, UPDATE ' STATEMENTS. I HAVE USED AT - USERCOMMAND - HIDE AND CHECKBOXES.
PLEASE SUGGEST A SAMPLE CODE FOR THIS.
Moderator message: please post again, but not in all upper case.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Jun 19, 2011 10:05 PMThere are actually 5 queries in this report now. From what I understand about a union query, I don't think it will work here because the data being returned in each of the queries is so different. I basically need to know how to make all the criteria for each individual to be displayed before proceeding to the next data set, which will include the same data as the first, but for the next employee, and so on. I need to basically create a repeating frame with each individual's respective data I guess, but every time I do, it tells me that it's referencing an invalid group.
-
Converting varchar to datetime where date field is missing
Hello Sir,
i have a column with varchar datatype values like '2013/12','2012/11' where date field is missing. i want to convert it as datetime at runtime so that i can use datetime related function. Is it possible for ms sql server 2008?
thanking you.>> I have a column with VARCHAR data type values like '2013/12', '2012/11' where DATE field is missing. I want to convert it as DATETIME2(0) at runtime so that I can use DATETIME2(0) related function. Is it possible for MS SQL Server 2008? <<
The most important leg on a three-legged stool is the leg that is missing :) A DATE is made up of three fields; YEAR, MONTH and DAY. You gave no business rule for picking the DAY field, so this makes no sense.
Since SQL is a database language, we prefer to do look ups and not calculations. They can be optimized while temporal math messes up optimization. A useful idiom is a report period calendar that everyone uses so there is no way to get disagreements in the DML.
The report period table gives a name to a range of dates that is common to the entire enterprise.
CREATE TABLE Something_Report_Periods
(something_report_name CHAR(10) NOT NULL PRIMARY KEY
CHECK (something_report_name LIKE <pattern>),
something_report_start_date DATE NOT NULL,
something_report_end_date DATE NOT NULL,
CONSTRAINT date_ordering
CHECK (something_report_start_date <= something_report_end_date),
etc);
These report periods can overlap or have gaps. I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601
data format required by Standard SQL and it is language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00' in the CHECK constraints.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Allow the user to add multiple email addresses in Email ID Field
In my jsp page, the funtionality i need to enhance is to allow the user to enter multiple email addresses in the "To" field of my Email A friend Task...right now it allows only one email id to be input by the user
Can anyone suggest me how to achieve it using javascript /jstl
Thanks in Advanceone more alternative is u can use : StringTokenizer class.
Code as follows: I hope this also helps u. But it will be used at server side. not at client side(for client side validations , we are using javascript).
java.util.StringTokenizer stringTokenizer=new java.util.StringTokenizer(request.getParameter("to"),",");
String[] list=new String[stringTokenizer.countTokens()+1];
int i=0;
while(stringTokenizer.hasMoreTokens()){
list=stringTokenizer.nextToken();
i++;
Regards -
I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
How to display subtotal in ALV, where the field is not a numeric.
Hi
We are having a requirement to display the sub total for a field using ALV grid display, where the field is not numeric.
The field is characte, Status field(consists of values Submit, Approve ,Reject), where the subtotal should be value of count of group by status .
say status with submit are 10 records, so after all records with submit status are, displyed, we need to display its subtotal as 10.
Thanks & AdvanceHi Satya,
REPORT z_alv_subtotal.*&---------------------------------------------------------------------*
*& Table declaration
*&---------------------------------------------------------------------*TABLES: ekko.*&---------------------------------------------------------------------*
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV*&---------------------------------------------------------------------*
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.*&---------------------------------------------------------------------*
*& Type declaration
*&---------------------------------------------------------------------** Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
ebeln TYPE char30, " Document no.
ebelp TYPE ebelp, " Item no
matnr TYPE matnr, " Material no
matnr1 TYPE matnr, " Material no
werks TYPE werks_d, " Plant
werks1 TYPE werks_d, " Plant
ntgew TYPE entge, " Net weight
gewe TYPE egewe, " Unit of weight
END OF x_data.*&---------------------------------------------------------------------*
*& Internal table declaration
DATA:* Internal table to store EKPO data
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
* Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
* Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
* Internal table for ALV Display events
i_events TYPE slis_t_event,
* Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.*&---------------------------------------------------------------------*
*& Work area declaration
*&---------------------------------------------------------------------*DATA:
wa_ekko TYPE x_data,
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.*&---------------------------------------------------------------------*
*& Constant declaration
*&---------------------------------------------------------------------*CONSTANTS:
c_header TYPE char1
VALUE 'H', "Header in ALV
c_item TYPE char1
VALUE 'S'.*&---------------------------------------------------------------------*
*& Start-of-selection event
*&---------------------------------------------------------------------*START-OF-SELECTION.* Select data from ekpo
SELECT ebeln " Doc no
ebelp " Item
matnr " Material
matnr " Material
werks " Plant
werks " Plant
ntgew " Quantity
gewei " Unit
FROM ekpo
INTO TABLE i_ekpo
WHERE ebeln IN s_ebeln
AND ntgew NE '0.00'. IF sy-subrc = 0.
SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.* To build the Page header
PERFORM sub_build_header.* To prepare field catalog
PERFORM sub_field_catalog.* Perform to populate the layout structure
PERFORM sub_populate_layout.* Perform to populate the sort table.
PERFORM sub_populate_sort.* Perform to populate ALV event
PERFORM sub_get_event.END-OF-SELECTION.* Perform to display ALV report
PERFORM sub_alv_report_display.
*& Form sub_build_header
* To build the header
* No Parameter
FORM sub_build_header .* Local data declaration
DATA: l_system TYPE char10 , "System id
l_r_line TYPE slis_listheader, "Hold list header
l_date TYPE char10, "Date
l_time TYPE char10, "Time
l_success_records TYPE i, "No of success records
l_title(300) TYPE c. " Title
* Title Display
l_r_line-typ = c_header. " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.* Run date Display
CLEAR l_date.
l_r_line-typ = c_item. " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
l_date.ENDFORM. " sub_build_header
*& Form sub_field_catalog
* Build Field Catalog
* No Parameter
FORM sub_field_catalog .* Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING: '01' '01' 'EBELN' 'I_EKPO' 'L'
'Doc No'(003) ' ' ' ' ' ' ' ', '01' '02' 'EBELP' 'I_EKPO' 'L'
'Item No'(004) 'X' 'X' ' ' ' ', '01' '03' 'MATNR' 'I_EKPO' 'L'
'Material No'(005) 'X' 'X' ' ' ' ', '01' '03' 'MATNR1' 'I_EKPO' 'L'
'Material No'(005) ' ' ' ' ' ' ' ',
'01' '04' 'WERKS' 'I_EKPO' 'L'
'Plant'(006) 'X' 'X' ' ' ' ', '01' '04' 'WERKS1' 'I_EKPO' 'L'
'Plant'(006) ' ' ' ' ' ' ' ', '01' '05' 'NTGEW' 'I_EKPO' 'R'
'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM. " sub_field_catalog*&---------------------------------------------------------------------*
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos TYPE sycurow
p_colpos TYPE sycucol
p_fldnam TYPE fieldname
p_tabnam TYPE tabname
p_justif TYPE char1
p_seltext TYPE dd03p-scrtext_l
p_out TYPE char1
p_tech TYPE char1
p_qfield TYPE slis_fieldname
p_qtab TYPE slis_tabname.* Local declaration for field catalog
DATA: wa_lfl_fcat TYPE slis_fieldcat_alv. wa_lfl_fcat-row_pos = p_rowpos. "Row
wa_lfl_fcat-col_pos = p_colpos. "Column
wa_lfl_fcat-fieldname = p_fldnam. "Field Name
wa_lfl_fcat-tabname = p_tabnam. "Internal Table Name
wa_lfl_fcat-just = p_justif. "Screen Justified
wa_lfl_fcat-seltext_l = p_seltext. "Field Text
wa_lfl_fcat-no_out = p_out. "No output
wa_lfl_fcat-tech = p_tech. "Technical field
wa_lfl_fcat-qfieldname = p_qfield. "Quantity unit
wa_lfl_fcat-qtabname = p_qtab . "Quantity table IF p_fldnam = 'NTGEW'.
wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM. " sub_fill_alv_field_catalog*&---------------------------------------------------------------------*
*& Form sub_populate_layout
* Populate ALV layout
* No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col widthENDFORM. " sub_populate_layout*&---------------------------------------------------------------------*
*& Form sub_populate_sort
* Populate ALV sort table
* No Parameter
FORM sub_populate_sort .* Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.* Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM. " sub_populate_sort*&---------------------------------------------------------------------*
*& Form sub_get_event
* Get ALV grid event and pass the form name to subtotal_text
* event
* No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 4
IMPORTING
et_events = i_event
EXCEPTIONS
list_type_wrong = 0
OTHERS = 0.* Subtotal
READ TABLE i_event INTO l_s_event
WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
MOVE c_formname_subtotal_text TO l_s_event-form.
MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM. " sub_get_event*&---------------------------------------------------------------------*
*& Form sub_alv_report_display
* For ALV Report Display
* No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .* This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_top_of_page = 'SUB_ALV_TOP_OF_PAGE'
is_layout = wa_layout
it_fieldcat = i_fieldcat
it_sort = i_sort
it_events = i_event
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = i_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM. " sub_alv_report_display*&---------------------------------------------------------------------*
* FORM sub_alv_top_of_page
* Call ALV top of page
* No parameter
*---------------------------------------------------------------------*FORM sub_alv_top_of_page. "#EC CALLED* To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_alv_top_of_page.
ENDFORM. "alv_top_of_page*&---------------------------------------------------------------------*
*& Form subtotal_text
* Build subtotal text
* P_total Total
* p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
p_total TYPE any
p_subtot_text TYPE slis_subtot_text.
* Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
p_subtot_text-display_text_for_subtotal
= 'Material level total'(009).
ENDIF.* Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_text
Regards,
Pravin -
Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xmlHi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲ -
I have just been on hold with Verizon tech support for an hour and then they terminated the call without ever connecting me to anyone. I have made 4 calls on this issue and was on hold for more than 30 minutes each time. Nobody could assist because I was on a land line. The last person told me to go where there was another cell phone and then call tech support. I did that but no tech support available. They kept saying "sorry you are still having trouble, goodbye." My home is served by a land line and I live where there is NO cell phone service. I rely on my cell phone when I go to town or are on the road. I found out last week that my phone is no longer finding service. It may have not been in service for more than a month and I never noticed. Perhaps its activation got screwed up when I looked into upgrading on the web not and did not or perhaps Verizon is forcing me to upgrade by cutting me off. Now I have no service anywhere and can't get any human assistance. Does anyone out there have an email address I can write to? I will keep calling next week but THERE IS NO VERIZON SUPPORT ON HOLIDAYS or WEEKENDS. There is no real online help for my device. My bill is current. HELP!!! Verizon should deduct by bill (I'll accept the minimum wage) for every hour I spend on hold or talking to tech support people who can't offer any support.
evemary wrote:
LG enV 3 as indicated on my account. I tried the online advice. There is no help there either.
This is a peer to peer customer forum. We customers can't see your account. Just our own account.
When was the last time you updated your phone's programming and preferred roaming list? When you are connected to a strong Verizon Wireless signal, dial *228, option 1 and then 2. -
How to prevent interference between multiple Kinect v2 sensors
Hi,
I have an application which used to use 3 Kinect v1 with partially overlapping field of views to have a large field of view of a scene. I am trying to upgrade this application to be able to use 3 Kinect v2, as the Kinect v1 is now discontinued.
I am having problems dealing with interference on the depth stream. Every now and then, the light from one of the Kinect will give bad readings on another Kinect... This is not new, the Kinect v1 had interference problems too.
To solve the interference problems with the v1, I used to simply toggle the IR emitters ON and OFF. Since my 3 Kinects don't need to acquire a frame at the same time, 2 of them would turn their emitters OFF and the one Kinect that would need to acquire a
frame would turn its IR emitter ON.
Now, since we can no longer control the IR emitter directly, can any one give me a good solution for preventing my Kinects from interfering each other ? My Kinects don't need to acquire a frame at the same time, but they may need to each acquire a frame
on a short interval (about 100ms), so closing and opening the Kinects is not an option as up to 2 seconds can pass between the call to KinectSensor.Open() and the first non-null depth frame.
Thank you.I've been pricing builds on Newegg that I could turn into a small Kinect cluster. I need three for what I want to do. this is what I have right now. It's going to be a while before I can build up three grand so I don't know if I'll ever
get to do it. But on the bright side I would be able to use it as a cluster for other projects as well, so...yeah. I was thinking i5 but the linked conversation is deterring me from that. Would you be willing to let me know some more of your system's
specs? Would love some input from anyone willing to offer any!
Link to conversation that deterred me from i5, specifically the post from "Carmine Si - MSFT":
https://social.msdn.microsoft.com/Forums/en-US/dbaeb6a9-2af2-49f9-8cdb-07aff309d5ce/insufficient-frame-rate-detected-from-kinect-kinect-sensor-v2?forum=kinectv2sdk
Maybe you are looking for
-
I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog? The meta data for each image is missing. I have over 2,000 images. I don't want to go back through each image and ad
-
Hi Please , help me in knowing the use of content tab for a fact table in the repository in OBIEE. Thanks.
-
G3 Usb Modem Huawei E1550 did not work after unplug (NetworkManager)
Hello, All! I have the following problem: When I boot with plugged in usb modem everything is fine. If I unplug modem and plug it back it can not be used any more. Some logs below. 1. Modem plugged on boot lsusb Bus 001 Device 003: ID 12d1:1001 Huawe
-
Hi, Pls explain me the concept of DB Link and kindly tell me how to implement it?Eagerly awaiting for your reply. Regards, sudhir
-
How to connect DMS to the Solution Manager
Hi, I have a DMS system in our SAP Landscape. I like to monitor this system in our Solution Manager. After installation and registration of the DAA agent in the Solution Manager I can see the host,but I do not see the DMS or the SAP MAX DB. How do I