Multiple landscapes in one NWDI?

We have 2 distinct landscapes - one for BI java development (with ABAPJ2EE dev/qa/prod) and another for ERP (again, an ABAPJ2EE dev/qa/prd landscape).
How could we use a single NWDI instance to manage both of those landscapes separately.  We would want to use the NWDI as the repository for java development in both the BI and ERP enviornments, but also would need to use it to deploy changes to different CONS/TEST/PROD systems.
I've seen the docs showing the ability to do multiple tracks, each with a different PROD system.  But what about having different CONS and TEST systems in those tracks, too?

Hi
Yes it is possible................ with maintenance project you get normal, admin and urgent correction types
only with implementation projects you get normal & admin only and no urgent corrections
Secondly you have to create logical component for each system landscape and add all of them to your single project
e.g
SAP ECC landscape LC1 Dev 100 QA 200 PRD 300
SAP BI landscape Lc2 dev 100 qa 200 prd 300
etc
Note one logical component can store only one system landscape information not all systems
so add all of them in one project and activate charm.
now whenever the ticket is created ....developer can choose the system in which they want to create a TR ......and based upon LC it knows which is right Quality and prd.
Morver never forget .....Solman domain controller is master and it uses the same TMS setup which you for satellite system without charm.
hope its clear now
regards
prakhar

Similar Messages

  • (CHaRM) multiple landscapes in one maintenance project

    Dear solman experts,
    I know that it is possible to have one global maintenance project supporting multiple landscapes with the scenario CHaRM, instead of one maintenance project for one landscape. My question is what are the specific configurations to keep in mind when performing the configuration? And what are the consequences e.g. Can I still use the Change Document types urgent and normal correction or is it limited to only the normal correction due to complexity?
    I hope someone can help me this.
    Thanks in advance.
    Regards,
    Ricky

    Hi
    Yes it is possible................ with maintenance project you get normal, admin and urgent correction types
    only with implementation projects you get normal & admin only and no urgent corrections
    Secondly you have to create logical component for each system landscape and add all of them to your single project
    e.g
    SAP ECC landscape LC1 Dev 100 QA 200 PRD 300
    SAP BI landscape Lc2 dev 100 qa 200 prd 300
    etc
    Note one logical component can store only one system landscape information not all systems
    so add all of them in one project and activate charm.
    now whenever the ticket is created ....developer can choose the system in which they want to create a TR ......and based upon LC it knows which is right Quality and prd.
    Morver never forget .....Solman domain controller is master and it uses the same TMS setup which you for satellite system without charm.
    hope its clear now
    regards
    prakhar

  • Multiple Tracks on one NWDI system

    Is it possible to have multiple tracks for different applications in one NWDI system?  Say I have an xRPM environment (DEV, QAS, and PRD) and a BW environment (DEV, QAS, and PRD).  Is it possible to support a seperate track for each application in a single NWDI system?  I am currently investigation whether or not I would like to implement NWDI and this is a key question I have.  Thanks for your help!
    Jon

    Hi Jon,
    I agree that some fundamental documenattion is missing. When looking at http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/68d64260752a78e10000000a155106/frameset.htm one could make it out but it isnt clear.
    That's why we get paid  I guess - to make sense out of SAP documentation
    Ta,
    Andi

  • One CTS+ for multiple landscapes?

    We have about 15 landscapes (ECC, R3, CRM, BI, PI, etc.)
    Each landscape has its own single SLD.
    We want to configure ONLY one CTS+ on an SM7.0 to handle all of the change
    request management for the 15 landscapes.
    Is this possible?
    Thanks!

    Hi,
    You can have a single CTS on multiple landscapes.
    Checkout the pdf which shows the SAP best practice
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58
    Rakesh

  • SMSY//Logical component definition - multiple roles for one system?

    Dear all,
    as our client has a divided system landscape (three-tier operational line as well as two-tier development line) some systems have more than one role to fill. The development system on development line is source system for all developments, as well as post-processing system for retrofit purpose from operational line. The maintenance system on operational line is target system for developments from development line, as well as source system for maintenance activities on operational line.
    --> What are the consequences of assigning multiple roles to one system?
    --> Is there anonther option than assigning multiple roles?
    Best regards
    Nick

    We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
    Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
    1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
    2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
    BI Content
    SCM Server
    cFolders on SCM Server
    GEOCODING
    Portal Content
    SAP LiveCache
    SAP NW - Adobe Docu. Service
    SCM Optimizer
    SCM WCL
    XI Content
    These are the main instances available to SCM 7.0

  • Multiple Developers on one Project

    Hi,
    I would like to know if there is a way that multiple developers on one project can work separately and later merge work into the main project?  I am thinking about the concept concurrent development.

    Hi Oumar,
    Use the NWDI to acheive this.
    Thanks.
    Sushil

  • Charm Configuration for Multiple Landscape

    Dear Guru's,
    We're having 5 landscapes (ECC, BI, etc) and one solution manager system, is it possible to configure ChaRm for the multiple landscape and control those 5 landscape in single solution manager system.
    Expecting your positive reply.
    regards,
    Guna

    Hi,
    You may create 5 Locical components and Assign them in the Maintenance Projects.
    and mainetenance cycle project each of them.
    There should be domain links from solman to each domain controllers in your landscape.
    Follow configuration as in SPRO
    Hope this helps.
    Feel free to revert back.
    -=-Ragu

  • Multiple Libraries on one computer

    I want to store more music in iTunes than my iPod has room for (original iPod). I want to use one library for music that I don't want on my iPod and the other for the music I want to sync. I also want to be able to move music back and forth between the them.
    How do I store music in multiple libraries on one computer without making separate computer user accounts or using the playlist work around?
    Any ideas would be greatly appreciated. Thanks, apple-rules

    Yes, I am referring to the auto syncing of playlists. Not all of my music is assigned to playlists and I don't want to create them - too many songs.
    As I mentioned in my original post:
    I want to store more music in iTunes than my iPod has room for (original iPod). I want to use one library for music that I don't want on my iPod and the other for the music I want to sync. I also want to be able to move music back and forth between the them.
    I want to be able to store music in iTunes and play that music in iTunes without having them downloaded to my iPod. It would be nice to have a Library in iTunes that can be separate from the iPod stuff.
    I think I found a work around (#12). Until I get a better solution I am going to create a master folder to which I will move all my music that I do not want syncing to my iPod. Then, I will do a manual sync and exclude that folder.
    Thanks everyone.

  • How to use multiple ipods on one account

    I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

    Take a look here:
    How to use multiple iPods with one computer
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Can i use multiple ipods on one account

    How do i use multiple ipods on one account so that we can share the music that we own and has been downloaded from cd's

    Just import the CD music into the libraries used by the different devices. Yo can use Home Sharing
    Understanding Home Sharing
    Troubleshooting Home Sharing
    CD music is not locked to any account

  • How to delete Multiple Artists in one action?

    Hi,
    I want to do a big clean up on an iTunes library with over 4000 albums.
    How can I delete multiple Artists in one action?
    It looks like I can only delete 1 Artist at a time, and then this action shoots me to the top of the list.  Which is a pain then having to scroll back down through such a huge list to then delete the others one at a time... each time being shot back to the top of the list.
    For example I have the following artists;
    The Alarm 01 – 1 song
    The Alarm 02 – 1 song
    The Alarm 03 – 1 song
    The Alarm 04 – 1 song
    The Alarm 05 – 1 song
    The Alarm 06 – 1 song
    And I want to delete them all in 1 action.
    Can this be done?  How best to do it?
    Thanks in advance,
    Dave

    You can't delete "artists" - just songs (or songs grouped into albums).  When iTunes displays the library or a playlist in Artists view it is doing so using the metadata values set in the relevant songs.  If you're looking at this view:
    then your selections in the left pane - the artists list - is filtering what you see on the right.  When you select Delete via the keyboard or via a right-click operation, you are initiating an operation to delete the songs by that artist.  To delete songs by more than one artist in a single operation you'll need to select and delete in Albums view:
    or in Songs view:
    where you can also use the Column Browser to filter songs by multiple artists:

  • Can there be multiple accounts on one id?

    can there be multiple accounts on one id?

    Unfortunately you can't do the logical and convenient thing of authorizing a computer with multiple Adobe IDs that are active simultaneously.
    You can authorize accounts from different vendors; one account per vendor.
    If you have multiple operating system users set up on the computer,  you can register different OS users as different Adobe Account users.

  • Ability to view multiple files in ONE window

    I can see here that this is not a new topic really but the thing with Acrobat 9 is so frustrating that it is just unbelievable.
    This is another pearl:
    Acrobat 9 "lost" its predecessors ability to view multiple files in ONE window. After opening four only documents I cannot see anything on the screen because the toolbars on each individual window cover all necessary view and nothing is left for the actual document. And sometimes I need to open 20 documents!
    This is ABSOLUTE DISASTER!!!
    I found some explanations from Adobe on the Web that are more than a year old.
    I was sure that by now this unfortunate mishandling of that feature (apparently it was dropped out from A9 deliberately - WHO'S IDEA WAS THAT?) would be somehow restorable.
    Would anyone happen to know if this feature can get restored to how it was working in A7 or 8 (without the need to uninstall A9 and install A8)?

    No, it can't be restored, unless Adobe decides to change the way Acrobat works (which is possible, but not likely).
    By the way, it was Microsoft's idea... Adobe were just following their example on this.
    You can make a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Generate Multiple Invoices in One PDF

    Hi,
    I have requirement whereby I need to generate multiple invoices in one PDF file. I am using Oracle BI Publisher with Oracle APEX 4.0.2
    If there is only one invoice that needs to be generated in one PDF file then I already have the solution whereby I print the APEX page item session state values on Invoice Header and get the invoice line items from a SQL Query in my RTF template.
    However how to the do the same when multiple invoice needs to be generated in one single PDF file ?
    Any pointers will highly appreciated.
    Thanks & Regards,
    Ashish

    asagarwal wrote:
    However how to the do the same when multiple invoice needs to be generated in one single PDF file ?It should be pretty straight forward.
    Once you've got the query returning multiple rows, then just add a repeating group to your report (if an existing report, just select the section of the document that will repeat -> add-ins menu -> insert repeating group...; or right click selection -> BI Publisher -> Create group...), wherein the column values exist. You can even specify a page break at the end.
    By the way, this question is probably more suited for the {forum:id=245} forum.
    Ta,
    Trent

  • How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

    My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
    I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
    When I clicked the Save button it showed the page that I scanned and showed 1/1.  On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
    Not to mention HP's Customer Support is useless!
    I'd appreciate any help I can get with this problem.
    Thanks,
    Mark

    Hi BH,
    I see your diagram.  I just scanned something.  The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram.  The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram.  I can't see the plus sign because it is not there.
    I tried re-installing the software and drivers as you suggested but that did not have any affect.
    Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
    I've noticed that on HP's support forum web page there is only 1 solved request for assistance.  That doesn't give me much confidence in HP.
    Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
    If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
    Thanks,
    Mark  

Maybe you are looking for