Multiple langauge possible ???

Hi all
i am using Netscape Messaging server 4.1x on Sun Sparc Running Solaris 7,
i have configured the SMTP,POP,IMAP and webmail ( http based mail),
right now we are having only one mail domain its "maildomain.com", and all the users for this mail domain
are created under "ou=maildomain" in the ldap tree under "o=our-organization", we have around 7000 users under this mail domain, using the default langauge English
Now we ahave just started our office in Japan and there are around 4000 mail users who are going to use the same SMTP/POP/Webmail services , but the problem is these users wants to use Japanies as their default langauge rather then English which we have configured for "ou=maildomain", so i would like to know is this possible ???? i mean how can i configure the smtp/pop/webmail of iplanet netscape mail servers to achive this
the ldap structure will be like this
o=allmaildomains
|
|
|-----------------ou=countryone ( English langauge)
| [smtp/pop/webmail]
|
|
|
|-----------------ou=someothercountry ( Japanis)
| [smtp/pop/webmail]
please let me know how is this possible ???? and what additional hardware or software would b required to achive this
Thanks a lot in advance to all of you
warm regards
Prashant Desai

Hi,
Can Any one can give one example if you worked in real time?. B'cos i'm still trying and checking for multi language.
any suggestions would be appreciated.
with regards,
sivababu

Similar Messages

Tooltips with multiple lines possible?

Hello,
how is it possible to modify the tooltip so that �t reacts to carriage returns - and shows multiple lines?
Any help appreciated.
Thanx.
alex

Hi,
I know two possible ways:
1) The HTML-way like in
http://javaalmanac.com/egs/javax.swing/tooltip_MultiLineTt.html
2) Subclass BasicToolTipUI and adjust the its paint() method. Then create a new JToolTip and set your new UI. Next override createToolTip() on those JComponents which should get the new tooltip.
HTH,
Michael

SAP CRM multiple clients possible

Hi,
We have a NetWeaver SAP CRM system (ABAP + JAVA) stack.
We run an internet webshop application on the JAVA stack connected to CRM ABAP stack, client 010. The CRM ABAP stack connects to SAP ERP.
Q1: Is it possible to add a new client 020 in the ABAP stack of the CRM system?
Q2: I don't understand in CRM the connection between the JAVA and ABAP stack. If I add a new ABAP client 020, do I need to copy the JAVA stack/client also?
Who can help me guiding in which direction I have to go?
Note: We want to connect a non-SAP system to client 020.
Overview:
ERP ABAP (client 010) --> CRM ABAP (client 010) --> CRM JAVA stack
non-SAP (legacy system) --> CRM ABAP (client 020) --> CRM JAVA stack
Q3: What are the problems (challenges) I can expect?

Hi Rene,
I think it is not supporting multiple clients. Wait for some additional replies.
Regards,
Ravindra

I-cal multiple user possibility?

I'm trying to make I-cal able to edit and manipulate from multiple computers. For example, My OS at home is mac; I made i-cal and sent it to my .mac account. When at work my OS is PC. I can view my calendar but, I can't make changes to it. My wife has a PC operating system too at work. I want to be able to view my cal at work and make corrections when possible. And have my wife add to my cal when necessary. Can someone help me?

It certainly works OK with multiple mac computers. We sync the same ical data (with 15 different internal calenders) between two macs in the office and one at home - all synced via .mac.
If I publish any one calender it can be viewed on a windows machine but that is as far as I can get.
I would love to be able to use ical or similar on the PC office accounts machine but like you I can't yet.
Does anyone know if entourage will sync completely with ical via .mac?

Multiple writes possible in DS in labview but not in CVI?

Hi
Am using Datasocket to communicate between to VI's, In one of the VI's am opening a new dataitem in "readwrite" mode and doing both read and write operation, and in the other VI am just writing on the dataitem by supplying the URL to the write function, surprisingly this is possible even though i havent created the dataitem from DS manager and have not selected the option of "allow multiple writes".
But if am creating a CVI application, which opens the dataitem in "readwrite" mode, and if i write on that dataitem from labview, it gives me an error, i even tried selecting the "allow multiple write" on this dataitem.
Please suggest some solution. Also if i open a lot of Dataitems will it cause any problems?, i guess our project needs atleast 100 dataitems if i will have to use command and response in different dataitems.
thanx for the help
Arun

Hello,
The following Knowledge Base describes two possible soltions for this issue.
Why Does My DataSocket Connection in LabVIEW Fail with "Error: Can't connect to data item, another w...
The second solution is what you have already described with checking the box to Allow Multiple Writers. I am not sure why that is not working in your case, but I would suggest trying the first soltuion suggested in the KB. It involves creating the datasocket item a certain way in LabVIEW, and more details are available in the KB.
Scott Y
NI

Single customisation page for multiple portlets - possible ?

Is it possible to create a single page to customise multiple portlets ?
Example : select star sign for Horoscope, city for weather, etc on the same page.
The preference store APIs allow us to set values, but always assuming that we are in a portlets 'edit' mode - we cannot provide the portlet instance ID ourselves.
Any ideas ?
Thanks

You could save your customization information into a custom DB table, rather than using the preference store (which can only be accessed by a particular portlet instance).

Travel Mgt: Multiple trips possible in 4.7?

Hello,
I am working on ECC 5.0 and I can create more than one trip on the same day. We want to implement also TE for another client who is still on 4.7? It seems that on 4.7 it is not possible to create multiple trips on the same day. Am I missing something or is this correct? If we need ECC 5.0 should it be enough to install only the related Notes?
Thanks for your reply.

I know in 4.6C using a feature (TRVPA) and entry (WRC) you control whether multiple trips are allowed for the same day. If you allow multiple trips for the same day the only thing you have to look out for is the time. They need to be at least a second or so apart.
I'm not sure if things are still controlled by features in the newer versions.

On WLC 'one-to-many' means one VLAN mapped to multiple SSIDs possible?

Does the Cisco Wireless LAN Controller Architecture includes this feature (configuration possibility)?

Thanks all for the provided infos. We have now the same requirements for two customers -> One-to-Many (One VLAN mapped to multiple SSIDs).
Can anybody who has realised such a set up provide some more details how to proceed?
The link from David describes the other way around, several VLANs mapped to one SSID. By the way, we where able to implement this, but it is only supported in centralized mode, local mode (Flex Connect it doesn't work).
For any advise how to proceed for "One VLAN mapped to multiple SSIDs" would be very appreciated.
Thanks Erich

Multiple subnets possible?

All,
I'm using my access point as a dhcp server in a test environment. Is it possible to have multiple subnets configured like a router-on-a-stick configuration?
Thanks!
John

The AP can only support one DHCP scope, and only on the Native VLAN (i.e., untagged).
There's only so much processor. Dumping a bunch of services on the AP is generally a bad idea. Ultimately it'll affect your performance & user counts.
Good Luck
Scott

Multiple UME possible?

Dear all.
We have Netweaver 7 with installed Netweaver Portal.
The UME is configured to use LDAP read only.
We would need a second UME.
So here my questions on which I did not found answers in SAPs help:
1) Is it possible to have a second UME on one Java instance? ... I assume not.
2) Is it possible to configure different data sources per server?
3) Is it possible to have a second UME when installing a second Java instance?
Thanks and regards
Stefan

Hello there,
) Is it possible to have a second UME on one Java instance?
>> This is possible with virtual directory server(VDS). UME points to VDS and VDS points to other DS.
2) Is it possible to configure different data sources per server?
>> per cental instance only one datasource.
3) Is it possible to have a second UME when installing a second Java instance?
>> I dont think its not requred in case if you use VDS it can point to multiple datasource
HTH
Vivek.

Ical multiple categories possible?

Recently I bought an Iphone4s, joined the iCloud, synchronised and lost all my calender entries in Outlook 2011 for the Mac. Bit of a problem because I like the easy way Outlook works. Working in Ical now and I'm getting the hang of it. Working in Icloud, Ical and Outlook 2011 at the same time is not possible. Only 1 bother left.
When making or exepting an appointment in Outlook I could give it multiple categories. I work in a small company and for my colleques I use different categories. If I want to see where he/she is I just open that categorie. Sometimes though we work in teams of 2 or 3 people. Problem is if I can only submit 1 category then it does not show in the other categories/calenders.
Q: does anybody no a trick or a way to give 1 calender entry multiple categories? Or even better: has anyone found a way to make Oulook 2011 for the Mac, Ical and Icloud work together?
Thnx

That is the limitation with it, only able to choose one calendar for association.
You might want to give Apple feedback on this limit, especially for enterprise users and their needs:
http://www.apple.com/feedback

Dragging multiple projects - possible?

I just imported my iPhoto library to Aperture 1.1 and I want to drag bunches of the projects created from iPhoto film rolls into a new folder structure (based on years and months).
Is it possible to select multiple projects and drag them to a new location? It doesn't appear so, but I'm wondering if I've missed a keystroke trick. I'd rather not drag them one-by-one.
Thanks,
Fraser

You can do this with the make multi-camera source sequence command in Premiere Pro CS6 (note that this was posted before CS6 was launched):
Mark the clips
Select the clips
Choose Clip > Create Multi-Camera Source Sequence
Choose the style of synchronization and click OK
Right click on Multi-Camera source sequence and choose > Open in Timeline.
Clips are now stacked up inside of a sequence
More here: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html#source_sequence_for_multi_camera_editing

Connecting to multiple TVs possible?

Is it possible to connect a single mini to multiple televisions (3-5)? I will want the same signal to play on all of the displays simultaneously. Is this something that is simply done with a high-end splitter?
Also, these would be widescreen 16x9 sets and not standard 4:3 sets. Will that make a difference?
I currently have a G4 mini, but will purchase a new one if I think a solution exists. Any information that some one could provide is appreciated. I've searched the forums, but only find info on dual displays.
Thanks.
G4 PowerBook 1.67GHz Mac OS X (10.4.1)

Since you don't have specific TVs in mind at this point, I agree with your assessment that component inputs will be most universal and the right way to go. Almost any wide format TV will have component inputs. Furthermore, since you want all the TVs displaying the same image, you should probably focus on 720p as the desired output from the Mac mini since it should be universally accepted by wide TVs and is a more computer friendly output vs. interlaced (1080i).
You may need to attach two boxes to a Mac mini in order to accomplish this. The first box would be a VGA to component video translation box. The second box would be a component video distribution box with one input and however many outputs you desire.
One company that comes to mind is Key Digital. Here are links to the products you might require. Consider calling them and explain your application. They might be able to solve it with one box.
http://www.keydigital.com/ProductDetail.aspx?categorycode=500&itemno=KDCTCA3&pro ductname=
http://www.keydigital.com/ProductDetail.aspx?categorycode=400&itemno=KDCDA6&prod uctname=Video/Audio%20Distribution%20Amplifiers
Another thing to be aware of is EDID. EDID is driver information located in a computer monitor's firmware. The information is passed to the host (computer) through a data channel embedded in the video cable (VGA cables and DVI/HDMI cables, but not component cables). It's what enables Macs to plug-and-play with so many different displays. But EDID is not so common among TVs. This is a long way of saying that you may end up having to use third party software, like SwitchRes X, to configure the mini to output 720p since 720p will probably not show up as one of the choices within Display Preferences on the mini when it is cabled through all these boxes.

Multiple "libraries" possible?

Pardon me if this is a dumb question...but..
My GF has an Ipod Nano, and a library with her songs in it. Now I want to get a Nano as well, and keep my own list or library of songs, completely separate from hers, that I can transfer onto my iPod Nano, using the same account. Is this possible with iTunes? How would I do this, if so, step by step?
Derek
Dell Windows XP

Just use different playlists to update each nano.
GF playlist
My playlist
There are step-by-step directions on creating playlists in iTunes > Help > iTunes and Music Store Help
Organizing your music > playlists
Then to update the iPods,
To automatically update your iPod, iPod nano, or iPod mini with only selected playlists, first connect your iPod to your computer. When it appears in the Source list, choose Edit > Preferences and click the iPod tab. Click the Music tab and select "Automatically update selected playlists only," and then select the playlists you want to copy.
There is also this article
How to use multiple iPods with one computer
http://docs.info.apple.com/article.html?artnum=300432

Multiple Genres Possible

I just saw this screen shot from the new Apple iPod 101 site. Does this mean we can now assign multiple genres to a song?
http://www.apple.com/support/ipod101/tunes/2/
It clearly shows three genres in the song's "get info" window separated by commas. Is this now possible?
TiBook, 1GHz Mac OS X (10.4.3)

For me, "Genre" doesn't matter much either. I don't care how something I listen to is categorized by music critics, or in sales bins. In fact I have very few traditional Genres specified in iTunes. But for iTunes "Genre" can be used in a variety of ways. As Sara points out the Genre can be used to build Smart Playlists. Or it can be used to categorize the music for ease of browsing. Or many other things. So for iTunes' purposes "Genre" is a browsing tool rather than a way to group one type of music together, even though it can also function that way as well.

Multiple langauge possible ???

Similar Messages

Maybe you are looking for