Multiple Language..More information
One of our team members tested that if he had oracle applications on 10g (UTF8) he was able to enter data in a DFF in a differnt language while logging into the US instance with no language patches on it. The scenario was repeated by another member who connected to the US applications instance and was able to save and re-query japanese characters.
Our requirement is just to have 2-3 fields to be in different language that too in couple of forms. Is it still recommended to install the language patches or continue doing the same as tested above. Not sure how reporting and interfaces will work with it.
Any pointers will be appreciated.
Thanks
Himanshu
Ouch!!! I will definitely say that I am sorry for the sweeping generallization of my comment ...
For anyone who has taken offence to my posting that the US of A is a "mono-culture" - I am SINCERELY sorry.
Just for your reference, I studied and worked in the US (NJ specifically) for almost 9 years. I agree that there are many cultures and ethnicity that are scattered (& concentrated) around the country.
My gripe is as follows - not just for Apple, but for all software manufacturers throughout the world. Consideration from the onset for multiple language (display and input) is very important.
The main reason I started using the iPod is that it is multi-lingual ready. I was an ardent supporter of the Creative Jukebox (being a Singaporean company) but was quickly put off by its inability to read Unicode.
Similarly - I switched from WinAmp to iTunes was for the sole reason that iTunes did not need a separate plug-in to recognize Korean, Chinese (Simplified & Traditional), Japanese, French .... languages.
The other side of it is that many "standards" are biased towards using the English language as a standard of communicating and documenting. This is due to the natural realization that it is a very common language (but incidentally not the most spoken, written &etc).
But I digress - as you stated - this is neither a political nor a cultural forum. The wonderful thing about the Mac is that it transcends these boundaries. I am a Switcher - having used and am still using Windows. But the issue is why would Apple have been such a hit with the Japanese since its inception while the others have taken the path of mass appeal.
So now I stand down from my soap box.
Again - for those who have taken offence to my statement - my apologies!
Similar Messages
-
Received News Letter/Information in multiple language.
Dear All,
How can I received, Oracle information in multiple Language.
In Luxembourg, it's something usual to deal with more than one languages.
How is it possible to made multiple Language subscription like:
American English General Information.
and all local information for:
Luxembourg/French/German/English Luxembourg.
Dutch/French/German/English Belgium.
French France.
German Germany.
Dutch Netherlands.
UK English.
And all other article in:
Luxembourg/French/German/English/Dutch.
Thanks Best regards Franç§ois LANGE.First you need to install the Asia group languages on the server . Then you need to alter all columns that have VARCHAR(n) to NVARCHAR(n). I do not think it is possible without adding N to get it working...
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
More Information??? Specifically Language
Don't know where else to put this request for additional "feature" for iTunes.
I just upgraded to iTunes 5 and like the lyrics feature - I will definitely be using it ...
But I have another bit of information that I would like to see added to the song's metafile - Language.
I am from Singapore and we are exposed to songs in many different languages - eg. Chinese (Mandarin), Taiwanese (aka Fukien or Hokkien), Japanese, Korean, English, French (a la Celine Dion) & the list goes on.
To make matters worse, some songs are sung in two languages - especially Chinese and Cantonese versions of a popular movie theme song. The easy workaround is to add a code - like (c) for Cantonese, for Italian, or (m) for Mandarin - against the song title, but it is so crude. It should be real easy for the Genius' at Apple to add one more field. This will definitely be a real bonus for people who don't just listen to one language (ie. the US of A).
OK - if there are any other suggestions I'll be happy to hear them.
Cheers!Ouch!!! I will definitely say that I am sorry for the sweeping generallization of my comment ...
For anyone who has taken offence to my posting that the US of A is a "mono-culture" - I am SINCERELY sorry.
Just for your reference, I studied and worked in the US (NJ specifically) for almost 9 years. I agree that there are many cultures and ethnicity that are scattered (& concentrated) around the country.
My gripe is as follows - not just for Apple, but for all software manufacturers throughout the world. Consideration from the onset for multiple language (display and input) is very important.
The main reason I started using the iPod is that it is multi-lingual ready. I was an ardent supporter of the Creative Jukebox (being a Singaporean company) but was quickly put off by its inability to read Unicode.
Similarly - I switched from WinAmp to iTunes was for the sole reason that iTunes did not need a separate plug-in to recognize Korean, Chinese (Simplified & Traditional), Japanese, French .... languages.
The other side of it is that many "standards" are biased towards using the English language as a standard of communicating and documenting. This is due to the natural realization that it is a very common language (but incidentally not the most spoken, written &etc).
But I digress - as you stated - this is neither a political nor a cultural forum. The wonderful thing about the Mac is that it transcends these boundaries. I am a Switcher - having used and am still using Windows. But the issue is why would Apple have been such a hit with the Japanese since its inception while the others have taken the path of mass appeal.
So now I stand down from my soap box.
Again - for those who have taken offence to my statement - my apologies! -
Window Update's actualizations "More information" language
I have polish language version of Windows 7, so when I go to "Windows update", choose one of available actualizations and click "Więcej informacji" ( "More informations" ) link in lower right part of the window, the page opened
is in polish language.
And this is the problem.
Pages opened this way are usually (or always?) machine-translated on polish, which are rather poor translations, thus I must to scroll down the whole page and find link to the original article.
I can do this twice or thrice, but this is just annoying and troublesome to do this almost every time.
How can I change default language of pages opened through Windows Update? (from polish to english)
Edit: I didn't know where to post this question, thus if it is in wrong sub-forum and I should repost it somewhere else, please, advice me where I should do this :)I'd ask them over here.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1396741232933
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Robohelp 10 Translating Content(topics) into Multiple Languages (French and many more)
Hi Every one,
Do any one know, how to translate whole content(TOC-Topics) into multiple languages with the help of Robohelp 10. Is it possible to translate data to other languages such as French, German, and Spanish.
Please provide proper solution for the same.
Thank you.
Regards,
Nutan ShindeAre you asking if Rh does the transalation for you? If so the answer is no. No help authoring tool does that.
The translation process is covered in a number of threads on the forum.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Support multiple languages in ESS-Portal (using Webdynpro)
Hi,
We are customizing ESS and Portal using Webdynpro. I have couple of questions here:
A. ESS can support multiple languages but requires language configuration, where I need to do that?
B. We are implementing ERP04 ESS (Webdynpro services) there may be additional configuration of the homepage framework for specific languages in the the backend, where I need to configure in portal side?
Can you help me out?
Regards,
Kumar.You can try the translation workbench in the Portal for translating portal content.
Content Administration > Portal Content Translation
More information on this is found here:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm">Portal Content Translation</a> in the Portal
and
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm">transaction SE63</a> (Translation Tools for Translators in R/3) -
Multiple Language Implementation
I need help with a Multiple Language Implementation. We are in a process of implementation of Oracle HRMS/Self Service HRMS and I have some questions on MLS.
Thanks
HimanshuHello Sanket,
Thanks for the information. I did look at the document and it was very helpful. However I still have one question
If we do not install other language packs and enter the other language information in DFFs (this is assuming the database is UTF8) what are the issues we should expect. Would that data work fine with reports and interfaces.
Would it be possible for me to talk to you over the phone. I would not take more than 10 minutes.
Thanks again
Himanshu
[email protected] -
Multiple currencies? Multiple languages?
hi,
Does SAP handle multiple currencies? Multiple languages? What is a currency factoring technique?
Thank you
Ashok kumarHI,
Yes.
SAP handles Multiple Currencies and Languages
see the table TCURR, TCURC for different currencies
Currency Factoring Technique:
Currencies in Planning
In Profit Center Accounting, three currencies can be stored at once:
Transaction Currency
The transaction currency is the currency used for a specific transaction. You can choose a different currency from the list of valid currencies for each new transaction. The transaction currency is stored in the transaction data for Profit Center Accounting as the so-called "first currency".
Local Currency (Company Code Currency)
The controlling area currency is stored in Profit Center Accounting as the second currency.
Profit Center Local Currency
You need to set a special currency for Profit Center Accounting in Customizing for each controlling area. This currency is used in the standard reports, among other things. You can find more information about this currency in Customizing. The profit center currency is the third currency updated in the transaction data.
How Do I Plan Currencies in Profit Center Accounting?
You first plan a profit center in USD. Then you later plan the same profit center in DEM in a second planning session. This may be necessary if:
the planned costs for the profit center in a certain cost element consist of external invoices in the local currency and external invoices from abroad and
the external invoice from abroad was billed and paid abroad
The currencies which can be planned manually are defined in the Layout.
If the corresponding key figures are defined and ready for input in the planning layout, you can plan in any permissible transaction currency, the company code currency or the profit center currency. The planned amount is then immediately and automatically translated into the other currencies. Note, however, that the system can only translate into a transaction currency if you have explicitly specified a transaction currency.
If you want to want to plan data using different transaction currencies, you need to use a planning layout that contains the characteristic "Transaction currency".
Note that data can only be saved in the transaction currency if a transaction currency has been specified. Otherwise the data will only be saved in the other currencies without the transaction currency.
If you want to want to summarize data in the transaction currency, you need to use a planning layout that does not contain the characteristic "Transaction currency". You can then:
change the summarized values, in which case the changes are not updated in the transaction currency, and
add any combinations of objects that have not already been planned.
If you
enter one transaction currency, the system only displays the amounts planned in that currency. You can
change these amounts
plan in the currency specified
enter a number sign (#) to represent the value " " (no value), the system only displays those values that were planned without the transaction currency. You can
change these amounts
plan amounts without a transaction currency
specify more than one currency or all currencies (*), the system displays all the planned values. You can
change these amounts
can plan as yet unplanned combinations of your planning objects in any valid currency.
Planned currency amounts are translated using
the value date you entered in the planner profile for your area
a translation factor entered in the currency table for the exchange rate type entered in the planner profile
You will find further information about the currency table and currency translation in the documentation FI Configuration and Organization.
Transfer Pricing Using the Conditions Technique
The term "transfer pricing" is used to describe the calculation of prices for internal exchanges of goods between profit centers. Conditions are the individual steps carried out during price calculation. When a goods movement takes place between two plants, the price can depend on a number of factors, such as the material involved, the sender plant, the profit center, the partner profit center, and so on. The information on these variable factors is stored as master data in the form of condition records. There the transfer price can be defined as a fixed price or a percentage increase or reduction.
This section describes the steps necessary to define transfer prices. You define these transfer prices in Customizing. There you will also find a detailed description of how to proceed.
Define condition tables, which you use to store condition records for each condition type.
Here you define the price dependencies for transfer prices. You can make the transfer price found dependent upon a combination of fields. For example, if you want your transfer prices to be defined for a combination of material and partner profit center, you need to define a condition table that contains these key fields. The condition records then contain the individual prices for each combination of material and profit center. You maintain the condition records when you define the individual condition types.
Define access sequences that the system should use to search for valid condition records.
An access sequence is a search strategy that the system uses to find valid data for certain condition tables. Each access sequence consists of one or more steps, which the system processes in the order specified. The order determines where the system should look first for a valid condition record. You can specify an access sequence for any condition type for which you create condition records.
Define condition types for all the pricing elements (fixed amounts, markups and markdowns) that occur in your daily business operations.
In Profit Center Accounting, a condition type represents a component of a transfer price. You can define condition types for every type of fixed price, markup or markdown that occurs in your internal goods movements. If you define a percentage markup or markdown as a condition type, you also need to define another condition type to serve as the basis for this percentage. This can be a price stored in the material ledger. The relationship between these two condition types is then defined in the pricing procedure.
In some condition types you need to specify an access sequence. In this way you determine which fields the system should use to search for a valid condition record.
Define condition records that determine the amount or percentage to be applied for each set of values in the condition table (such as "fixed price of USD 100.00 for material 01, profit center ABC, and plant 0001").
You can maintain condition records directly from within the definition of the condition type. Or you can define them from the application menu by choosing Master data ® Transfer prices ® Conditions. It is also possible to copy existing condition records to create new ones. This is especially useful if you want to change the currency of the condition record. You can maintain condition records either in Customizing or in the application menu, under Master data ® Transfer prices.
Define a pricing procedure to group together condition types and determine how they relate to one another.
In addition to the selection and order of condition types, a pricing procedure determines
which subtotals should be calculated
what base value the system should use for calculating percentage markups or markdowns
what conditions must be met in order for a certain condition type to be calculated
The base value for markups and markdowns can be either a fixed price or a value from the material ledger. Using a routine supplied in the standard R/3 System, you can have the system read the legal, group, or profit center price from the material ledger and calculate the markup or markdown on this basis.
Define condition exclusions, which let you determine which condition type should be used in a given situation.
In transfer pricing for goods movements, it often happens that a number of different condition records are valid. Using condition exclusions, you can compare conditions with one another and use, for example, the most favorable price for the partner profit center.
For different condition exclusion methods are available:
· The most favorable condition in an exclusion group
· The most favorable condition record for a condition type
· The most favorable condition among different exclusion groups
· Exclusion of those conditions in an exclusion group when a condition type that belongs to another exclusion group appears
Define transfer price variants, which let you specify which pricing procedures are relevant for actual data and which for plan data.
To valuate different datasets, such as plan and actual data, using different conditions, you can define variants with an assignment to a specific pricing procedure. The system processes the specified procedures in order until it finds a valid transfer price.
In transfer pricing for goods movements, only actual data is valuated (variant 000). However, you can also create additional variants if you want to calculate plan prices on the basis of pricing data.
Define pricing reports, which determine the structure of lists of conditions.
A pricing report lets you analyze condition records according to certain criteria and define the structure of these lists. You can define pricing reports either in Customizing for Profit Center Accounting or in the application menu, under Master data ® Transfer prices ® Pricing reports.
Regards,
Padmam. -
Hello,
I am developing a Windows Phone 8 application (for Nokia/ Microsoft Lumia) where multiple languages will be supported. Now, it is needed to support Bengali (Bangladeshi language) in my Windows phone 8 application.
But, I didn't find Bengali language in the Setting -> Language -> phone Language. So could anyone tell me that a multiple language supported windows phone 8 application support Bengali language or not. If it is possible, then how user will change
the app language from phone setting?
FYI .. From Microsoft OEM documentation, I have known that Windows Phone 8.1 GDR2 includes support for Bangla (Bangladesh language).
ThanksHi NONAME-2007,
As far as I known the Bangla language is supported as a on-screen keyboard language on the Windows Phone 8. But it is not supported as a display language in Windows Phone 8, so you can not choose this language from the phone setting. For more information,
please try to refer to the following article:
http://www.windowsphone.com/en-us/how-to/wp8/basics/feature-and-service-availability .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Database storage of multiple languages for name of a single entity
Surely I'm not the first person to have this problem, but I can't find many resources on how to solve this. Just some background on what I'm working with, I'm running a web application using the Struts framework with jdk 1.4 on a Weblogic 8.1 server connected to an Oracle 9i database, I'm using DAO for my persistence layer, and I'm not opposed to using any 3rd party software to assist in this task.
For example, say I have a database of DVDs, My application will retrieve the list of DVDs from the database to display to the user. Depending on the user's Locale I want to display the title of the DVD in that language.
This is a simple example, but the real-world application is much more complicated. The application is highly configurable meaning that through a configuration application, my internal users can add DVDs at any time, edit the title of the DVD, or add a new language that they want the title to display in, etc. When a customer logs in to the application front-end they will be able to change the language they want the application to display in at any time, and the application will need to reflect that change. The display of constant text like field labels and page text is easy using Struts but its this configurable dynamic text thats a bit more difficult.
Its obvious to me that I will need to store the multiple languages in the database in some way, I'm thinking of either storage in some xml format, or a new table hanging off the "dvd" table with languages for each dvd. Either of these options would work for my purposes, but I don't want to go reinvent the wheel when this same problem has arleady been solved. If someone could point me in the right direction I would appreciate itOne common way to handle this is to modify your key for the dvd title to include a locale identifier:
key dvdtitle
becomes
key locale dvdtitle
Now your db can hold multiple translations of the same dvd title.
Regards,
John O'Conner
Its obvious to me that I will need to store the
multiple languages in the database in some way, I'm
thinking of either storage in some xml format, or a
new table hanging off the "dvd" table with languages
for each dvd. Either of these options would work for
my purposes, but I don't want to go reinvent the
wheel when this same problem has arleady been solved.
If someone could point me in the right direction I
I would appreciate it -
Why do I get a popup message in multiple languages requiring a shutdown and restart
Why do I keep getting a popup message in multiple languages requiring a shutdown and restart? Has been going on for a few months. Because of the shutdown reports have been sent to Apple upon restart.
After it restarted, did you see a dialog box resembling this one:
If so, next time it occurs click Report...
Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.
If problems continues to occur please determine if they also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well. -
With Pages 5.2 how can i use multiple language types in a single document
My Macbook Air Has the version 10.9.3
I'm used to work with the old version of Page.
But now I am using the new version of Pages 5.2 (1860).
I want to know with the new version how do I use an multiple language types in a single document option.
In the old version of Pages I was using Inspector -> Text -> "More" tab -> Language: British Inglese.
In the new Pages 5.2 I do not know how to do it
Could you help me?
meloIt's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar. -
Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
VijayBut have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein -
Unit Of Measurement in Multiple Languages
Hi All,
I wants to maintain the basic UoM in multiple language like Norwagien or Danish etc. We have uploaded Norwagien/Danish languages for our client.
I have maintained my vendor language as norwagien/danish. Now while PO creating I am getting an error saying that basic UoM is not maintained in NO/DA language.
Can any one guide me the config. steps in Transaction code CUNI for Dimension, ISO code & UoM for NO/DA language.
Regards
AmitHi Laxman
Thanks for reply.....
I performed step guided by you but the desired langauge was not copied. I refered to one more link & discovred that we have to login into desired langauge & have to enter description of langauge manually.
After entering description I have created PO for vendor whoes communication langauge is other than English & PO was created sucessfully.
Thanks for inputs....... -
I received the above error reinstalling SQL Server 2008. I have tried all suggestions. This error also appears when I install any version of SQL Server.
I have also installed;
Microsoft® .NET Framework Version 2.0.50727.4927
Microsoft® .NET Framework Version 4.0.31106.0
Microsoft® .NET Framework Version 3.0.6920.50
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052081
Exit facility code: 1212
Exit error code: 1935
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-23 19:17:20
End time: 2014-02-23 19:21:35
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: OHPC
Machine processor count: 2
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: H:\SQLServer2008R2_SP1\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: OHPC\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
SFC/ Scannow
2014-02-23 19:08:22, Info CSI 0000016f [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:08:22, Info CSI 00000170 [SR] Beginning Verify and Repair transaction
2014-02-23 19:08:23, Info CSI 00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:23, Info CSI 00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:08:26, Info CSI 00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:27, Info CSI 0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:08:27, Info CSI 00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 00000182 [SR] Verify complete
2014-02-23 19:12:33, Info CSI 00000326 [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:12:33, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2014-02-23 19:12:33, Info CSI 00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:12:35, Info CSI 0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:12:36, Info CSI 00000331 [SR] Verify complete
2014-02-23 19:13:14, Info CSI 0000035d [SR] Repairing 3 components
2014-02-23 19:13:14, Info CSI 0000035e [SR] Beginning Verify and Repair transaction
2014-02-23 19:13:14, Info CSI 00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:13:15, Info CSI 0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:13:15, Info CSI 0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:13:15, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000377 [SR] Repair complete
2014-02-23 19:13:15, Info CSI 00000378 [SR] Committing transaction
2014-02-23 19:13:15, Info CSI 0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repairedSummary:
Attempted proposed solution. Error still appears.
This is installed:
Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
Microsoft Visual C++ 2005 Redistributable 8.0.56336
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
I reinstalled:
vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
Results:
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
Corporation. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
Reconfiguration success or error status: 0.
I installed SQLServer2008R2_SP1
Same error message came up;
SqlSupport_KatmaiRTM_Cpu64_1.log
MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
{837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files -- Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
Thanks, Ted U
Maybe you are looking for
-
Records not displayed in the WGBEZ field in H_T023_MEPO search help.
Hello Friends, I have created the search help exit , in that based on the LREF3 , we have to fetch the materail groups. 1.I have written the code in the exit , in the search help exit tables parameter record_tab , the data is coming correctly but whe
-
I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?
-
Spry Image Slideshow, IE8 & 7 not finding .js resources, works fine in FF
Pointing to http://labs.adobe.com/technologies/spry/ui/samples/ImageSlideShowWithThumbFS.html in IE and the spry scripts are not loading. Any words of wizdom? I have confirmed this behavior on 3 differenct machines. I put together a prototype (work
-
What does this error mean and how do I correct it?
"The disk could not be read from or written to"
-
I need to implement an automated ftp process where I pull some binaries from an sftp server over to my local SOlaris 8 box. I do not have the sftp executable, and need to know how to get a secure ftp client for SOlaris 8. Thanks - Jesse ([email prote