Multiple Lines of Type Along Path

Hi,
I have a sort of ring doughnut shape (just to be clear, a circle with the centre cut out) and want to add text within this shape.  To make the shape, I created a larger circle, then a smaller circle overlapping it and chose "Exclude Overlapping Shapes".  I can obviously click within the larger circle and then type along this path, either outside or inside depending on the baseline shift %, but the trouble is my text is multiple lines.  When I press 'enter' I don't get a new line, I just lose the typing tool.  Surely there's a way to do this? I'm using Photoshop CS6.
Thanks for any help!
Chris

Surely there's a way to do this?
I guess it’s creating multiple Paths – one for each line.

Similar Messages

  • Why Can't I Type Along Path?

    I working in PS CS5. I've created a new layer on my image for my text. I created an elliptical and clicked the path button. I then clicked the Horizontal type tool. I began typing, but realized that each letter was creating a "_" instead of typing the actual layer. Now I have _________ going across my elliptical. Any thoughts?
    Thanks!

    Is the cursor changing before you start typing.
    If you want the text along the path, hover the cursor until it looks like below
    and then click to type
    For type inside the path hover the cursor inside the path until it looks like below
    and then click to type.
    You don't have to create a new layer before you type on a path, the type layer
    will be created if your using horizontal or vertical type tools (not the type mask tools).
    Your using the ellipitical marquee tool to make a selection, then turning it into a path?
    Also if your not seeing any type, check that your foreground color is not the same color
    as your image and/or try a different font.
    MTSTUNER

  • How do you type multiple lines on a path? (label for top slope of bottle)

    Ill describe the best I can...
    I am making a label that will wrap around the top half of a bottle, the part that slopes to the spout.  Because of this, the label is actually shaped more like an arch so when it goes onto the bottle, it will look more straight.  The top part of the label of course will be a tighter arch than the bottom half.  This is part of why its hard to make things look right.  I know I can bend a line at the same angle and type on it and it looks right but I have a paragragh I have to do this with, about 5 lines worth.  I dont want to have to make a different path line for each one because that would be a nightmare to get each line perfect with each other.  Is there a way to do the "type on a path" to work with multiple lines at once?

    Scott Falkner wrote:
    You can't. Each line of text requires an explicit path. You could draw the top line and the bottom line, then make a three-step blend between the two. Expand the blend then link the paths so that text from path 1 flows to path 2, and so on. In the example below each path is linked to the one below. I only needed to paste text into the top path. I was able to link to each following path by clicking on the red + at the end of the previous path, then clicking on the path below.
    You could also design the label flat and use a distortion envelope or Warp effect to bend it. This is how I have done such labels in the past. That method requires more experimentation, but makes edits easier.
    That seems to be something that might work out.  How do you separate each of the strokes from the blend to make them typable though?

  • Text Fields of an External Content Type come across as Multiple Line of Text

    In SharePoint 2013 I have an external content type that consists of a couple of short (nvarchar)  fields (no more that 15 characters). When I use this ECT in a custom list the fields from the ECT end up as a "Note" type instead of "Text".
    I am not sure how this happens. I have verified this by accessing the list via poweshell where I see the Type being as "Note" and also the SchemaXml showing the colName attribute as "ntext".
    The strange thing is that initially when I created the web application and built my lists this was working.
    Any ideas or pointers would be appreciated.
    Thanks

    Hi,
    Based on your description, my understanding is that When you use the ECT in a custom list the fields from the ECT end up as a "Note" type instead of "Text".
    Have you ever changed column types from "Single line of text" to "Multiple Lines of Text" in list?http://www.sharepointdiary.com/2013/09/change-column-type-in-list-using-powershell.html
    External content types are made up of fields whose types are a subset of the primitive types of .NET. For each such .NET type, a rudimentary mapping to SharePoint’s field controls exists, describing a field’s visual appearance. Fields of type string for
    instance will, on the new and edit forms, render as a single-line text field.
    Besides, check whether the following link is useful:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/0fcb5a9f-8445-4a37-9e60-ac5e9e14e8f1/sharepoint-designer-external-content-type-shows-single-line-text?forum=sharepointgeneralprevious
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

  • Multiple lines of Condition types in Purchase order header

    Dear Consultants,
            We assigned certain condition types in the access sequences. This access sequence has 4 condition tables. User can maintain condition records at any level; viz SiteArticle OR Deli.CountryHTS code OR Deli.CountryHTS codeShippingCountry OR Pur.OrgVendorMC level
    However, once these condition types are determined at item level in PO, the total of condition amount at header level is not summed up in one line, and is displayed in multiple lines i.e as many conditions for an item as many lines.
    The client wants all the amounts for a condition type for an item to be displayed in single line. Could someone please suggest some solution???
    R's
    Manoj.

    CLOSED

  • Sharepoint 2010 - Multiple line of text column with Plain text type

    Hi All,
    I have list where multiple lines of text with plain type column is used. When I start entering information in multiline text box in new form, I faced following problem,
    I typed enough information so that scroll bar is visible. When I stopped typing information, scrollbar automatically scrolled up and last few lines are not visible. But when I started typing again, my cursor is automatically placed at the end text and now I
    am able to see last lines.
    This issue occurs in IE8 version and not in other versions. Can anybody help me to resolve this issue or tell me this is bug in IE8?

    Try press ctr F5 and refresh the page to load it properly, also check in browser compatibility mode
    Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
    INSQLSERVER.COM
    Mohammad Nizamuddin

  • Problem: Multiple jar files in Class-Path [ IOException: line too long]

    Hello Folks,
    I am trying to create a jar file using the following command:
    jar -cvfm mygrid.jar MANIFEST.MF -C grid-jar/ .
    My MANIFEST.MF file is as following:
    Manifest-Version: 1.0
    Main-Class: com.gridftp.INSPgridFTP
    Class-Path: lib/activation.jar lib/ant.jar lib/antlr.jar lib/axis.jar lib/castor-0.9.3.jar lib/cog-abstraction-common-2.0.jar lib/cog-abstraction-examples-2.1.jar lib/cog-certmanagement-1.0.jar lib/cog-certrequest-1.0.jar lib/cog-grapheditor-0.46.jar lib/cog-gridfaces-1.0.jar lib/cog-gridshell-1.0.jar lib/cog-jglobus-1.2-050621.jar lib/cog-karajan-0.31.jar lib/cog-provider-clref-gt3_0_2.jar lib/cog-provider-clref-gt3_2_0.jar lib/cog-provider-clref-gt3_2_1.jar lib/cog-provider-clref-gt4_0_0.jar lib/cog-provider-condor-2.0.jar lib/cog-provider-gt2-2.0.jar lib/cog-provider-gt2ft-1.0.jar lib/cog-provider-gt3_0_2-2.0.jar lib/cog-provider-gt3_2_0-2.0.jar lib/cog-provider-gt3_2_1-2.0.jar lib/cog-provider-gt4_0_0-2.2.jar lib/cog-provider-local-2.0.jar lib/cog-provider-ssh-2.0.jar lib/cog-provider-webdav-1.0.jar lib/cog-resources-1.0.jar lib/cog-setup-0.91.jar lib/cog-util-0.91.jar lib/commons-discovery.jar lib/commons-httpclient.jar lib/commons-logging.jar lib/concurrent.jar lib/cryptix32.jar lib/cryptix-asn1.jar lib/cryptix.jar lib/j2ssh-common-0.2.2.jar lib/j2ssh-core-0.2.2.jar lib/jaas.jar lib/jakarta-regexp-1.2.jar lib/jakarta-slide-webdavlib-2.0.jar lib/jaxrpc.jar lib/jce-jdk13-125.jar lib/jgss.jar lib/jug-1.0.1.jar lib/junit.jar lib/log4j-1.2.8.jar lib/mail.jar lib/puretls.jar lib/saaj.jar lib/wsdl4j.jar lib/xercesImpl.jar lib/xml4j.jar lib/xml-apis-1.1.jar lib/xmlsec.jar lib/xpp3-1.1.3.4d_b4_min.jar lib/xstream-1.1.1-patched.jar .
    The grid-jar directory structure is:
    | - com -- all classes are under this dir.
    | - lib -- all the required jar files are in this dir.
    There are 59 jar files in the lib directory. When I try to create the jar file, I get the following exception:
    jar -cvfm mygrid.jar MANIFEST.MF -C grid-jar/ .
    java.io.IOException: line too long
    at java.util.jar.Attributes.read(Attributes.java:356)
    at java.util.jar.Manifest.read(Manifest.java:167)
    at java.util.jar.Manifest.<init>(Manifest.java:52)
    at sun.tools.jar.Main.run(Main.java:124)
    at sun.tools.jar.Main.main(Main.java:904)
    Any idea, why do I get this exception? Is there any restriction as to how many jar files (or characters) can be there in the Class-Path value in the MANIFEST.MF file?
    Please help.
    Thanks,
    Ana

    use as the following way to resolve the problem:
    (1) use separate lines, to avoid too long a line for java package name lists
    (2) type a preceding space before each folloing lines, for example:
    Class-Path: ...jar ...jar ...jar
    ...jar ..jar
    ...jar ...jar
    ...jar ...jar
    Hello Folks,
    I am trying to create a jar file using the following
    command:
    jar -cvfm mygrid.jar MANIFEST.MF -C grid-jar/ .
    My MANIFEST.MF file is as following:
    Manifest-Version: 1.0
    Main-Class: com.gridftp.INSPgridFTP
    Class-Path: lib/activation.jar lib/ant.jar
    lib/antlr.jar lib/axis.jar lib/castor-0.9.3.jar
    lib/cog-abstraction-common-2.0.jar
    lib/cog-abstraction-examples-2.1.jar
    lib/cog-certmanagement-1.0.jar
    lib/cog-certrequest-1.0.jar
    lib/cog-grapheditor-0.46.jar
    lib/cog-gridfaces-1.0.jar lib/cog-gridshell-1.0.jar
    lib/cog-jglobus-1.2-050621.jar
    lib/cog-karajan-0.31.jar
    lib/cog-provider-clref-gt3_0_2.jar
    lib/cog-provider-clref-gt3_2_0.jar
    lib/cog-provider-clref-gt3_2_1.jar
    lib/cog-provider-clref-gt4_0_0.jar
    lib/cog-provider-condor-2.0.jar
    lib/cog-provider-gt2-2.0.jar
    lib/cog-provider-gt2ft-1.0.jar
    lib/cog-provider-gt3_0_2-2.0.jar
    lib/cog-provider-gt3_2_0-2.0.jar
    lib/cog-provider-gt3_2_1-2.0.jar
    lib/cog-provider-gt4_0_0-2.2.jar
    lib/cog-provider-local-2.0.jar
    lib/cog-provider-ssh-2.0.jar
    lib/cog-provider-webdav-1.0.jar
    lib/cog-resources-1.0.jar lib/cog-setup-0.91.jar
    lib/cog-util-0.91.jar lib/commons-discovery.jar
    lib/commons-httpclient.jar lib/commons-logging.jar
    lib/concurrent.jar lib/cryptix32.jar
    lib/cryptix-asn1.jar lib/cryptix.jar
    lib/j2ssh-common-0.2.2.jar lib/j2ssh-core-0.2.2.jar
    lib/jaas.jar lib/jakarta-regexp-1.2.jar
    lib/jakarta-slide-webdavlib-2.0.jar lib/jaxrpc.jar
    lib/jce-jdk13-125.jar lib/jgss.jar lib/jug-1.0.1.jar
    lib/junit.jar lib/log4j-1.2.8.jar lib/mail.jar
    lib/puretls.jar lib/saaj.jar lib/wsdl4j.jar
    lib/xercesImpl.jar lib/xml4j.jar lib/xml-apis-1.1.jar
    lib/xmlsec.jar lib/xpp3-1.1.3.4d_b4_min.jar
    lib/xstream-1.1.1-patched.jar .
    The grid-jar directory structure is:
    | - com -- all classes are under this dir.
    | - lib -- all the required jar files are in
    e in this dir.
    There are 59 jar files in the lib directory. When I
    try to create the jar file, I get the following
    exception:
    jar -cvfm mygrid.jar MANIFEST.MF -C grid-jar/ .
    java.io.IOException: line too long
    at
    at
    at
    at
    java.util.jar.Attributes.read(Attributes.java:356)
    at
    at
    at java.util.jar.Manifest.read(Manifest.java:167)
    at
    at
    at java.util.jar.Manifest.<init>(Manifest.java:52)
    at sun.tools.jar.Main.run(Main.java:124)
    at sun.tools.jar.Main.main(Main.java:904)
    Any idea, why do I get this exception? Is there any
    restriction as to how many jar files (or characters)
    can be there in the Class-Path value in the
    MANIFEST.MF file?
    Please help.
    Thanks,
    Anajust

  • Creating type along or inside a path

    Hi All,
    I read the tutorial about Creating type along or inside a path. I have tried to create few types of type along,inside and outside a path and shape. I was wondering why there are variations and restriction among them. Below are my screen shots to describe my problem.
    Screen 1

    Sorry, I have been trying to upload the screen shots, now it is done.
    Screen 1: type outside the path
    Screen 2:type inside the path
    Screen 3:type outside the shape
    Screen 4:type inside the shape
    I am confused why I cannot flip the "type inside the path" whereas flipping inside and outside is possible for "type outside the path". Any help is greatly appreciated. Thank you.

  • Setting the value of a single attribute for multiple line items

    Hi all,
    I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
    1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
    TYPES: BEGIN OF t_kblp,
              fipos     TYPE kblp-fipos,
              kostl     TYPE kostl,
                      END OF t_kblp.
      DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
      DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
            wa_kblp LIKE LINE OF lt_kblp,
            lt_bseg              TYPE STANDARD TABLE OF bseg,
            wa_bseg              TYPE bseg.
      DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
      DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
      DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
            lo_api_controller    TYPE REF TO if_wd_controller,
            lo_message_manager   TYPE REF TO if_wd_message_manager,
            lo_nd_tbseg          TYPE REF TO if_wd_context_node,
             lo_el_tbseg          TYPE REF TO if_wd_context_element,
             lt_el_tbseg          TYPE wdr_context_element_set,
             lv_bseg              TYPE bseg.
      lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lo_api_controller ?= wd_this->wd_get_api( ).
      CALL METHOD lo_api_controller->get_message_manager
        RECEIVING
          message_manager = lo_message_manager.
      lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lt_el_tbseg = lo_nd_tbseg->get_elements( ).
      LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
      IF lv_bseg-kblnr NE ' '.
          SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    * get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
    lo_el_tbseg->set_static_attributes(
                               EXPORTING static_attributes = wa_kblp ).
       CLEAR: lv_bseg, wa_kblp.
      ENDLOOP.
    everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
    lo_el_t_bseg->set_attribute(
        name =  `PROJK`
    value = wa_kblp-pspnr ).
    but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
    Thanks,
    Rajat Garg
    Edited by: rajatg on Jun 24, 2011 5:09 PM

    Hi Chris,
    I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
    LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
    IF lv_bseg-kblnr NE ' '.
      SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    move: wa_kblp-belnr to wa_bseg-kblnr,
    wa_kblp-fipos to wa_bseg-fipos,
    wa_kblp-kostl to wa_bseg-kostl,
    wa_kblp-pspnr to wa_bseg-projk,
    wa_kblp-geber to wa_bseg-geber,
    wa_kblp-saknr to wa_bseg-saknr,
    wa_kblp-fkber to wa_bseg-fkber,
    wa_kblp-grant_nbr to wa_bseg-grant_nbr,
    wa_kblp-gsber to wa_bseg-gsber,
    lv_bseg-dmbtr to wa_bseg-dmbtr.
    append wa_bseg to lt_bseg.
    lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
          get element via lead selection
          lo_el_edit_property = lo_nd_edit_property->get_element( ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_FIELD`
            value = 'ABAP_TRUE' ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_WBS`
            value = 'ABAP_TRUE' ).
    endif.
    endloop.
    o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
      CALL METHOD lo_nd_t_bseg->bind_table
        EXPORTING
          new_items            = lt_bseg.
    Can you please see what I am doing it wrong here....

  • Multiple Line Graph

    First off, thanks to kglad for the line graph function I
    started with, it has been a huge help. Now the step I'm trying to
    take is 2 fold.
    First, I'd like to graph more than one line segment on the
    graph. Right now I am graphing functions f1 and f2, but f2
    currently overwrites f1. I want them to coincide so f1 goes from
    x=1 to x=15, f2 goes from x=15 to x=25, f3 goes from x=25 to x=10
    at a different y (these are all curves), and finally f4 goes from
    x=10 to x=1 creating a closed shape. Also, I want the x values and
    the y values to be variable based on the temperature. I'm using
    PV=nRT and n, R, and T are all known. so I have something like
    P=nRT/V where P is y, V is X and the nRT can be calculated for two
    steps of the 4. The other two steps are adiabatic, so Q=0, I don't
    know yet how to fit the lines but i do know that y = a / (x^(5/3))
    is a formula that works, I just need to find the proper a values
    for steps 2 and 4.
    Part two of this issue is that currently the graph is drawing
    as the whole canvas, which is fine for testing until i get the
    multiple line part worked out; however I only want this to be 1/4
    of the viewing area as I have other movie clips and such to put on
    this. A conceptual drawing of what I plan on making can be found
    at:
    http://www.students.bucknell.edu/gbement/Steps.html
    I'm a novice to Actionscript and movie clips, I previously
    did everything with motion tweens and nothing was dynamic. I plan
    on creating the piston and molecule simulation in another movie
    clip, then I can vary the play speed relative to the hot and cold
    temperatures by looping the movieclip and having it play faster for
    a high T and slower for a low T.
    Any help on any of my many issues would be greatly
    appreciated and the user will be recognized for their assistance in
    my research presentation :)

    Hi Arun, thanks again for the help but upon closer inspection
    (along with only a basic knowledge of java and actionscript), I
    think your script would need editing to work for me (editing i'm
    unsure of how to do). What I'm looking for is a graph that will
    create a line based on a function. Much like y=(a*b*c)/x or
    y=(a*b*c)/(x^1.66) The a*b*c would be complicated also, but here's
    what i've thought up on paper that I have to move to script, I hope
    this is useful:
    Step 1: Calculate the a*b*c
    The original function is PV=nRT , nRT being the a*b*c ,
    however the Thot and Tcold terms are input boxes that the user
    types in before hitting the "go" button.
    So I have to do this much:
    tcold = Number(tcold_num.text);
    thot = Number(thot_num.text);
    var n:Number = 1;
    var R:Number = 0.0825;
    var a:Number;
    var b:Number;
    var c:Number;
    var d:Number;
    a = n*R*thot // Step 1 constant
    b = // Step 2 constant (formula to be finished :-/) Looks to
    be a formula using ((b) / (Math.pow(x, 1.666)))
    c = n*R*tcold // Step 3 constant
    d = // Step 4 constant (formula to be finished :-/)
    Then I need to find a way to initialize axis to line the
    graph, I can label the P and V axis using static text boxes later I
    suppose.
    The problem I have with yours that I don't understand is that
    I could add the function into the y part of the addLine() function,
    however it's noted as inity= y1 (requires a number), and the
    function definition has y1:Number.
    Now the issue i'm tackling below is just a newbie's lack of
    understanding (i hope), but the script kglad wrote (snipped below)
    will graph one line, and i can't figure out for the life of me how
    to write this up to graph more than one instance without
    overwritting the previous line. Again, Thanks for the help so far,
    it has helped me find the points where I lacked direction and solid
    ideas before.

  • How to outline multiple lines of text

    how to I outline multiple lines of text to create a filled outline around a group of text like this:

    Bdog,
    You may (you have done some of it already):
    1) Create the Type and Type>Create Outlines;
    2) With the Group selected in the Appearance palette, in the flyout Add New Stroke and set the Stroke Weight and colour as desired, then drag the Stroke below the Contents;
    3) Object>Expand Appearance;
    4) Lock the original group with the letter shapes and Expand;
    5) Pathfinder>Unite, then lock the bottommost path and delete the rest which formed the holes;
    6) Unlock the original group with the letter shapes.
    You may also wish to simplify the outline.
    And what Kurt said.

  • ID CS4 - Is multi-line text on a path possible?

    Hi,
    I'm somewhat of an ID noob, so apologies if I'm missing something obvious. I want to create a sequence of text paragraphs, where each line of text in a paragraph follows a curved baseline. I know that for a single line, I can use text on a path. For multiple lines of text, I could just paste copies of the first path, one beneath the other. But I then would have to manually take care of line spacing, line wrapping and all the other good stuff you get for free with text frames which, for a larger body of text, would be painful. Is this possible in ID or, if not, one of the other CS applications?
    Thanks,
    Beaker.

    No. But you are on the right track with copy paste. Instead, though, I'd use step and repeat to give you the spacing you want. Click the path with the text-on-a-path tool first to get it ready to accept text before you duplicate, then you can thread the ouport of one path to the inport of the next and the wrap will be automatic.
    Peter

  • How to select multiple lines in ALV report

    hi gurus,
    I am working on an interactive ALV report where i have to select multiple lines from the basic list into an internal table, based on check box clicks. Using RS_SELFIELD i can select only 1 row. The coding has been done based on Call Function. Can u please suggest some way.
    Regards,
    Satyajit

    hi,
    try like this
    TABLES:     ekko.
    TYPE-POOLS: slis.                                 "ALV Declarations
    TYPES: BEGIN OF t_ekko,
      sel,                         "stores which row user has selected
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          fieldcatalog1 TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE slis_layout_alv,
          gd_repid     LIKE sy-repid.
    DATA : BEGIN OF det_tab OCCURS 0,
            ebeln LIKE ekpo-ebeln,
           END OF det_tab.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
    *       Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-do_sum      = 'X'.        "Display column total
      fieldcatalog-datatype     = 'CURR'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
    *       Build layout for ALV grid report
    FORM build_layout.
      gd_layout-box_fieldname     = 'SEL'.
      "set field name to store row selection
      gd_layout-edit              = 'X'. "makes whole ALV table editable
      gd_layout-zebra             = 'X'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
    *       Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = gd_repid
          i_callback_user_command  = 'USER_COMMAND'
          i_callback_pf_status_set = 'SET_STAT'
          is_layout                = gd_layout
          it_fieldcat              = fieldcatalog[]
          i_save                   = 'X'
        TABLES
          t_outtab                 = it_ekko
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
    *       Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
       UP TO 10 ROWS
        FROM ekpo
        INTO CORRESPONDING FIELDS OF TABLE it_ekko.
    ENDFORM.                    " DATA_RETRIEVAL
    *       FORM USER_COMMAND                                          *
    *       --> R_UCOMM                                                *
    *       --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    * Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
          IF rs_selfield-fieldname = 'EBELN'.
            READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
            SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
            CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
          ENDIF.
        WHEN 'DET'.  "button add by me
          CLEAR det_tab.
          REFRESH det_tab.
          LOOP AT it_ekko INTO wa_ekko WHERE sel = 'X'.
            MOVE-CORRESPONDING wa_ekko TO det_tab.
            APPEND det_tab.
          ENDLOOP.
          PERFORM build_cat.
          PERFORM dis_data.
      ENDCASE.
    ENDFORM.                    "user_command
    *&      Form  set_stat
    *       text
    *      -->RT_EXTAB   text
    FORM set_stat USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
    ENDFORM.                    "set_stat
    *&      Form  build_cat
    *       text
    FORM build_cat.
      CLEAR fieldcatalog1.
      REFRESH fieldcatalog1.
      fieldcatalog1-fieldname = 'EBELN'.
      fieldcatalog1-tabname = 'DET_TAB'.
      fieldcatalog1-seltext_m = 'Order No.'.
      fieldcatalog1-outputlen = 10.
      APPEND fieldcatalog1 TO fieldcatalog1.
      CLEAR fieldcatalog1.
    ENDFORM.                    "build_cat
    *&      Form  dis_data
    *       text
    FORM dis_data.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = 'ZTEST_DS'
          it_fieldcat        = fieldcatalog1[]
          i_save             = 'X'
        TABLES
          t_outtab           = det_tab.
    ENDFORM.                    "dis_data
    here i have copied standard gui status of ALV into my z status ZSTAT and add one button DET......
    here u can select morethan one line using control(ctrl)
    reward if usefull...

  • Crystal report -How to display multiple lines in line chart?

    Hi,
    M struggling to display multiple lines in line chart. All the values m fetching it from database into data table in below format & data type
    Category(String).....year(Int).....graph_values(Int).....table_value(String)
    Test.........................2006.......... -100............................(100)
    Avg..........................2006..........20................................20
    Median......................2006...........5................................5
    Test..........................2007...........500.............................500
    Avg...........................2007............90..............................90
    Median.......................2007............45..............................45
    M using cross tab to display data and chart to plot line. Following fields I used in Cross tab Expert & Chart expert
    Cross tab expert-
    Rows u2013 category
    Columns u2013 year
    Summarized fields u2013 Min of table_value
    In Chart Expert u2013
    On Change of - Year
    Show values - graph values
    In cross tab m able to see the data properly but not in graph.I have three categories. Hence it should plot three lines in line chart but m able to see only one line for test category.
    FYI u2013 using VS 2008 and crystal report assembly version 10.5
    Urgent. Please reply soon.
    Thanks
    ThakurS

    I got the solution.
    In Chart Expert - I should use
    On Change of -- Year, Category
    Show values -- graph values
    Thanks,
    ThakurS

  • Single/ Consolidated  GR/IR entry for a PO having multiple line items

    Hi,
    In a PO there are couple of line items for materials of similar type and class. While making the Goods Receipt, the Accounting Document is making two no of line items for GR/IR accounts as credit and two no of inventory accounts as debit. Same is happening to GR/IR account while making Invoice Receipt document also.
    Informatively, both the materials above have been assigned to one GR/IR account in the OBYC table.
    My question is, is it possible to consolidate the value of both these materials and post one line item for GR/IR account. This is required as in our case in a PO, normally, we do have multiple line items and hence it is resulting multiple no of GR/IR and inventory accounts in a single accounting document. As we are getting details of the line item from PO history, we do not require it in the accounting document.
    Requested to kindly help.
    Regards
    B.Mohanty

    Hi
    This is not possible (you will compleet los the link between the Invoice and GR)
    The reason is that when you receive an invoice that this is based on a G/R line and the way arround when you receive first the invoice(s).
    The system need this for the automatecly clearing from the  G/R - I/R account, that is based on PO an PO line item number.

Maybe you are looking for