Multiple Local Users With Same Name

Hi guys, this is the screen saver after i upgraded to Yosemite. I knew wifi have problem, but i'm still okay with it. Another problem that i'm facing now is this!
I don't really understand what's the number meaning behind my username which is the number (7), i've never seen this before. Sometime it will turn to 2, 3, 4, or maybe 5. This problem force me to quit some software because it said i'm using same license with multiple user, but i'm the only one who using this username!
I don't understand what happen with this, i've try to read and change almost everything in the preferences. I've try to google everything too, can anyone help me? I really don't want to format my macbook. I've never register same username even i'm in a office.
Really appreciate if anyone can guide me and tell me what should i do! Thanks!

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
I've gotten some relief by renaming it in System Preferences/Sharing and then clicking Edit tab to make sure it is correct there. May not hold.

Similar Messages

How to get Unique calid for users with same name in multiple domain env..

I found we need to use "-k legacy" option for creating users in non-hosted setup..
I had two domains default as xxxx.com and the one that I created as yyyy.com
When I have users with same name in two of the domains as user1..
The calid for both of them is... user1 ....so they share the same calendar
When Im in valid SSO of yyyy.com I get the mail account for user1 as [email protected] .....but the calid .. common as user1
How I can get unique calid for users under two domains..
whether I need to set Hosted domain support...Then how the mailid's differ with out using hosted domain support..
And I need to login UWC without using @domain.com...
Help me on this...
Ashik

Do you have UWC and Cal configured at least for virtual domain support?
basically.. for discussion.. let's say you have three domains on your server.. 1st domain is the default domain. other 2 domains are virtual domains.
if all domains were created with mail and cal support (-S mail,cal).. you would use the following options when creating users:
1) for the default domain.. you must use the "-k legacy" option when adding users.
2) for the other two domains.. when you create the user.. do NOT use a "-k" option.
If you do not use the "-k" option.. it defaults to "hosted" which will cause the user's calid to be [email protected]
If you Do use the "-k legacy" option.. it will create the calid as just "userid"
With regard to logging into UWC without the @domain.com part of a username in a hosted domain.. the easiest way to avoid this.. is to point a host name under the hosted domain to the server.
if you point webmail.xxxx.com to the server... and then access it via:
http://webmail.xxxx.com/uwc/
any users in the xxxx.com hosted domain will NOT need to use @xxxx.com when logging in... they can just use "userid"
This feature does not take any special configuration (aside from adding a DNS entry for the hosted domain)
Hopefully that helps.

Passing multiple URL parameters with same name

Hi,
I have a question which is not entirely related to Java. But although its related HTTP calls, so I thought I might get some ideas here.
Background:
I am making HTTP URL call from SAP ABAP code. Its pretty much similar to Java (creating URL connection, setting HTTP headers, connecting, receiving response and everything)
For example,
http://service_server:8080/a7/extension.services.SearchRequirements.a7x?RequestStatus=CR&RequestStatus=RR
Now, this service_server runs a query to database where it uses both these values of "RequestStatus" to form 'OR' condition for a field.
Issue:
When I run this URL from browser, it shows XML response containing results for both values. In short, this is the ideal response.
(I am using getParameterValues(string) at service_server to read multiple values for same parameter)
But when I see response in SAP system, I see that it is returning data for only one value of 'RequestStatus'.
I checked the logs of service_server, and I see that it has received only one parameter, not two.
Question:
It seems like SAP systems web server is truncating both parameters with same name and passing just one of them to outside server(??)
Is there any configuration at Web Server side or any HTTP headers to be set so as to avoid this?
Can anybody suggest something on this?

I managed to resolve this issue by using HTTP 'Post' method to send the data.
CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
    EXPORTING
      URL                = L_URL
    IMPORTING
      CLIENT             = L_HTTP_CLIENT
    EXCEPTIONS
      ARGUMENT_NOT_FOUND = 1
      PLUGIN_NOT_ACTIVE = 2
      INTERNAL_ERROR     = 3
      OTHERS             = 4 .
"STEP-2 : AUTHENTICATE HTTP CLIENT
CALL METHOD L_HTTP_CLIENT->AUTHENTICATE
EXPORTING
    USERNAME             = 'name'
    PASSWORD             = 'password'.
"STEP-3 : SET HTTP HEADERS
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING NAME = 'Accept'
                VALUE = 'text/xml'.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
    EXPORTING NAME = '~request_method'
               VALUE = 'POST' .
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_CONTENT_TYPE
    EXPORTING CONTENT_TYPE = 'application/x-www-form-urlencoded' .
"SETTING REQUEST DATA FOR 'POST' METHOD
IF L_PARAMS_STRING IS NOT INITIAL.
   CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
     EXPORTING
         TEXT   = L_PARAMS_STRING
     IMPORTING
           BUFFER = L_PARAMS_XSTRING
     EXCEPTIONS
        FAILED = 1
        OTHERS = 2.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_DATA
    EXPORTING DATA = L_PARAMS_XSTRING .
ENDIF.
"STEP-4 : SEND HTTP REQUEST
CALL METHOD L_HTTP_CLIENT->SEND
    EXCEPTIONS
      HTTP_COMMUNICATION_FAILURE = 1
      HTTP_INVALID_STATE         = 2.
"STEP-5 : GET HTTP RESPONSE
    CALL METHOD L_HTTP_CLIENT->RECEIVE
      EXCEPTIONS
        HTTP_COMMUNICATION_FAILURE = 1
        HTTP_INVALID_STATE         = 2
        HTTP_PROCESSING_FAILED     = 3.
"STEP-6 : READ RESPONSE DATA
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_CDATA
        RECEIVING DATA = L_RESULT .
"STEP-7 : CLOSE CONNECTION
CALL METHOD L_HTTP_CLIENT->CLOSE
EXCEPTIONS
    HTTP_INVALID_STATE = 1
    OTHERS             = 2   .
{code}

Misrouted emails to .mac users with same name as person at different ISP?

In the last 6 months I've received emails from strangers with .mac addresses whose prefix (eg jimbo@) is the same as the actual name of someone in my address book who isn't a .mac user. It looks as though mac is looking at the name, searching for a .mac user with that prefix, and misrouting the email to them instead!
Any ideas? Is it possible? Any fixes?
iMac & Powerbook Mac OS X (10.4.5)

I wrote an email to a friend nicknamed Alleycat. I had not put
Alleycat in the name fields in address book, but it is the prefix
of the email address, which goes to her website. Forgetting this,
I carelessly typed 'Alleycat' in 'To:' and it came up as the blue button
which indicates mail knows the address (which it should not have done),
so I hit Send.
The Mail.app stores all message recipients in the list of Previous Recipients in Mail by default and the Mail.app autofill feature pulls from the Address Book and the list of Previous Recipients in Mail.
At the Mail.app menu bar, go to Window and select Previous Recipients. A previous recipient already entered in the Address Book will have a vCard icon to the left of the name or email address. You can add a previous recipient to the Address Book or remove a previous recipient from the list. Removing a previous recipient from the list of Previous Recipients in Mail has no effect on Address Book entries.
A week later I got a worrying personal response from a totally
unknown (but real) [email protected], and the friend Alleycat
had not received my mail.
Do you save all sent messages? If so, is this sent message still available in the account's Sent mailbox to view the email address in the To: field?
The Mail.app autofill feature does not make up an email address. As previously provided, the autofill feature pulls from contacts in the Address Book and from the list of Previous Recipients in Mail.
Regarding being infected by a Trojan written for OS X, this would require opening an attached file that is masquerading as something legitimate and you would also be prompted for your admin password before the malicious script is installed.
You cannot be infected by anything targeted at OS X (which are few and far between anyway) by opening an email message alone.

Accessing multiple xml elements with same name

I am having trouble with an xsl stylesheet. This is what one of the rows of my output xml document looks like
        <Row>
            <Num>1</Num>
            <Valuation>Val</Valuation>
            <COMBCHARFLAG>Y</COMBCHARFLAG>
            <CCCOUNT>2</CCCOUNT>
            <CCDESC>CHARDESC1</CCDESC>
            <CCDESC>CHARDESC2</CCDESC>
        </Row>
Does anyone know how I can access the 2nd CCDESC ("CHARDESC2") . When i run this in the workbench I can only ever access the first CCDESC, it acts like the 2nd isn't there. However I was also using a 3rd party xsl editor called "XMLSpy" to look for other possible solutions and when i render it with XMLSpy, everything is displaying correctly. Is this some sort of limitation of the workbench? Any help would be much appreciated. Thanks
This is the template i am calling in my xsl.......
<xsl:template name="for.loop">
<xsl:param name="i" />
<xsl:param name="count" />

<xsl:if test="$i <= $count">
<tr>
     <td align="center"><xsl:value-of select="CCDESC[position()=$i]"/>
     </td>
     <td align="center">
          <input style="width:110px;" class="Mfieldv-M" name="txtValuation"></input>
     </td>
</tr>
</xsl:if>
<!begin_: RepeatTheLoopUntilFinished>
<xsl:if test="$i <= $count">
<xsl:call-template name="for.loop">
<xsl:with-param name="i">
<xsl:value-of select="$i + 1"/>
</xsl:with-param>
<xsl:with-param name="count">
<xsl:value-of select="$count"/>
</xsl:with-param>
</xsl:call-template>
</xsl:if>
I than call the template as follows from within my <xsl:for-each select="Row"> statement
                                                            <xsl:call-template name="for.loop">
                                                            <xsl:with-param name="i">1</xsl:with-param>
                                                            <xsl:with-param name="count"><xsl:value-of select="CCCOUNT"/></xsl:with-param>
                                                            </xsl:call-template>

Muzammil,
Thanks for the response. I may have explained my situation a little poorly. I am not trying to access the 2nd CCDESC within the workbench via a repeater or such. It is after the XSL renders the page that I don't see the second CCDESC. When the XSL renders the page through Internet explorer i get something that looks like the following......
Res # 1
CHARDESC1
When I render it in the application XMLSpy it shows both CCDESC's like follows.
Res # 1
CHARDESC1
CHARDESC2
In XMLSpy if i change the line of xsl code from      <td align="center"><xsl:value-of select="CCDESC[position()=$i]"/> to      <td align="center"><xsl:value-of select="CCDESC[2]"/> the page is rendered in XMLSpy with both labels the same as follows.
Res # 1
CHARDESC2
CHARDESC2
If i do that same change in the workbench and render the page through IE I get no label results....
Res # 1
Thanks

Collecting values from multiple check boxes with same name

Hi,
I have a jsp-page with one form with several check boxes sharing the same
name (but with different values).
Can I collect the values in an array/list or something?
/jsp-beginner and google ain't my friend in this case

this answer not good enough for you?

Multiple users with same name, different domains

I'm setting up a mail server for the first time . I've got everything working fine, but I have a question. Can I have the following: [email protected] and [email protected] be two separate accounts? Currently it goes to the same mailbox.
Thanks,
- Don

Yes you can. You will need to set the 2 domains up as virtual mail domains.
See here for example:
http://osx.topicdesk.com/content/view/45/62/

"Open with" shows multiple app's with same name; 2 at most are valid

I use Preview as my default JPEG viewer application; when I want to edit I used another application and use "Open With". I have a backup drive mounted and the app's backed up show... that's a nuisance, but acceptable.
However, there are 5 listings for some applications, yet only 2 possible copies (as verified by Spotlight). How can I clean-up the list? Is there a way to tell an app's source (in the menu)?

A long shot perhaps, but at the bottom of the Open With submenu you will see "Other...". If you go in there there is a setting for either "All Applications" or a specific application folder to be selected. Have you assigned the latter and does it help?

While saving multiple attachments from mail, files with same name are added and not replaced

While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

Bjørn Larsen a écrit:
Hi all
Hope to get some help with Elements Organizer.
I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

How can OIM provision users with same Display Name in AD?

I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!

Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot!

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

Can Multiple DOE users access same client

Dear All,
I have a use case where manager and his team have to use the same physical device ( It mean same client in the handheld and also the same application). Manager and all the team members are DOE Users.
As far as i know, we will have multiple local users in the client and mapped to single doe user, where as synchronization will happen through DOE sync user, who is configured in the client. During Sync DOE authenticates this user.
But in my use case, DOE should authenticate all the users (user with which i am synchronizing the data). Is this possible in the standard client? Is there any possibility to achieve this?
Regards,
Kiran.

HI,
Your requirement is a standard behavior and there is nothing like all the local client users are mapped to DOE users in default client.
If each local client user has a corresponding DOE server username(i guess it need to be the same username or so) , with a user logged in , he/she can provide their own sync password which will take sync user as the currently logged in local client user.
Only catch here that irrespective of which user is synching, all the messages in the queue (new data,modifications etc ) created by all the users will be send to server with this sync.
Regards,
Liji

Creation of BPEL with a WSDL having 2 operations with same name

How to create a BPEL 2.0 from WSDL which is having the +2 operation with Same name+ and we are planing to USE PICK activity but the BPEL is giving error while selecting the operation name
can't create input variable.The selected operation does not have an input message.+
WSDL:Operation
     <wsdl:portType name="ABC">
          *<wsdl:operation name="XYZ"*>
               <wsdl:input name="Request1" message="tns:Request"/>
               <wsdl:output name="Response1" message="tns:Response"/>
          </wsdl:operation>
          *<wsdl:operation name="XYZ">*
               <wsdl:input name="Request2" message="tns:Request"/>
               <wsdl:output name="Response2" message="tns:Response"/>
          </wsdl:operation>
     </wsdl:portType>
Can you please provide the alternate solution if the procedure followed by us is wrong
Thanks in Advance

Hi Preetam,
I believe it's not allowed, use different operation name.
A wsdl:portType in a DESCRIPTION MUST have operations with distinct values for their name attributes.
This applies only to the wsdl:operations within a given wsdl:portType. A wsdl:portType may have wsdl:operations with names that are the same as those found in other wsdl:portTypes.
why do you need multiple operation with same message type?
Regards,
Faiz

Two methods with same name but different return type?

Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
     System.out.println("Failure");
//call first method - displays stack trace on screen
     showerr(NPe);
//call second method - returns stack trace as string
        String msg = showerr(NPe);
        System.out.println(msg);
} // end of main
public static void showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     String stackTrace = sw.toString();
     System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     return sw.toString();
}//end of second showerr
} // end of class
[\code]

Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
     public String buildError(Exception e){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( e.getClass().getName() )
               .append( " : " )
               .append( e.getMessage() ) ;
          return buffer.toString() ;
     public String buildError(String msg){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( msg ) ;
          return buffer.toString() ;
     public String buildErrors(int errCount){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( "There have been " )
               .append( errCount )
               .append( " errors encountered.") ;
          return buffer.toString() ;
}Make sense ???
Regards,

Two soa domain with same name "TestSOADomain" sharing same SOA schema ?

I tried creating two soa domain with same name "TestSOADomain" (different path) sharing same SOA schema .However one domain came UP to Running mode and other domain going to AdminMode and "soa-infra" application of that domain is not active.
I do want to understand can this be possible with SOA ,ie. two soa domain sharing same SOA schema ?
If possible what are all the problems might come
1. While executing soa composites with asyncronous behaviour ?
2. How the polling services will work ?
3. will the XREF_DATA table ROW_NUMBER column inserted uniquely while inserting data from two different domain into same SOA schema ?
4. Other issues ?
Thanks

Each domain is expected to refer to its own unique database schema. Same SOA schema should not be shared by multiple SOA clusters/domains. It is technically possible though, I suppose, and still can run fine any one SOA environment at any given time with the other SOA environments/domains (sharing the same SOA schema) shutdown. It is not the general/recommended practice to share SOA schema across domains and there could be potential implications and unexpected behavior, particularly when the SOA environments pointing to the same schema are all running at a time.

Multiple Local Users With Same Name

Similar Messages

Maybe you are looking for