Multiple "login" and "System" keychains

My menu bar lock icon shows two entries for keychain "login". There are also 2 entries for "login" in Keychain access. This is also true for my "System" keychain. They can be both locked, both unlocked or one of each. If I delete the extra one, they both get deleted. There are still two "login" keychains in the list, but the lock icon is gone and an empty square is shown instead (for both of them). There is only one login.keychain in my ~/Library/Keychains and only one System.keychain in /Library/Keychains. This all applies to my Power Book. On my iMAC, keychain access shows 2 "System" keychains but only one "login". What are these extra keychains and how do I get rid of them. It's not really a problem (everything works like I think it's supposed to), it's more of a nuisance and a puzzle that I really want to solve.

Hi Zaheer,
Thanq for reply,
SM04 we can find no.sessions and terminals , but i am looking for mutiple logons login and logout timings.
Thanks,
sksk.

Similar Messages

  • Airport password created in login and system keychain both..

    Hey,
    I've been having a few vexing problems with my new MacBook 2.16 running 10.4.6 that I was hoping that I might get solved on here. I've been unable to get my machine to use the airport password in the system.keychain. If it's not in the login.keychain, it doesn't work. I've tried deleting and re-creating the keychain using systemkeychain -vfCt and it still doesn't work. Anybody have any ideas? I'm downloading the Combo 10.4.6 updater to see if that corrects the problem. I've already tried to repair permissions.
    If I elect to save the password to an airport network, it is saved in both the login and system keychain and I'm not sure if this is the correct behavior.

    I've applied the 10.4.6 Combo updater, no affect upon the problems that I've been having with airport. It just won't seem to use a password stored in the system.keychain for some reason.

  • Airport Utility and System Keychain Problem

    I'm having a strange issue when trying to access Airport Utility on our imac. When I click on manual update I get a popup box asking for the administrator user name and pass word because Mac OS X wants to use System keychain. When I type those in the boxes and click allow an error message appears saying I typed an invalid password. I've rebooted, I booted up in Safe Mode which asks you for a password before it logs in - no problems there. I didn't try to access AU from there, not sure if that's possible. I've even gone to account settings and changed the password which requires you to enter the current password, that worked. I used the new password with that warning from Airport Utility but got the same error. I went back and changed the password back to the original and tried again, same error.
    I don't normally access AU on that computer, I use my laptop and there are no problems there, so I don't know if this is a problem that just cropped up under SL or not. So far that's the only instance of this popping up with that issue. I don't believe I've ever seen it say it needed to access the System keychain before. Another oddity to this is I can open up Keychain Access and click on unlock the System keychain which then asks you for an administrator password, I enter it and it unlocks with no issue. Any help with this would be greatly appreciated.
    John

    Sometimes the Keychain just gets a bit "wonky." The simplest resolve, in most cases, is to delete all entries with the Kind of "AirPort base station password" and "AirPort network password" in the Keychain using the Keychain Access utility.

  • [account] multiple login and customer change

    I discover that I have 2 accounts (login) to the SDN.
    An old one, not linked to any customer and a recent one specifically created for my current customer (for notes btw).
    <b>Is there a solution to only keep a single login whatever customer changes we live ?</b>
    Looking at the profile I see that the customer installation is not modifiable ... meaning, I think, that we are attached "for life" to a customer installation. Is that right ?
    Is there a solution, a way to manage that situation ? Or do we have no choice today to have as many accounts as customers and participate to SDN with a main account not related to any customer ?

    Hi Rootdr,
    G5 with @mac name. <-> MacBookPro with AIM
    This should work.
    The locations of each computer is not mentioned.
    If this is being tested in you home behind the Modem then the modem will have to have the ports open to both computers.
    Port Forwarding can not do this but UPnP can and so can Port Triggering if you have it.
    G5 with @mac <-> MBP with same @mac name will not work.
    They can login with the multiple log in option. You may even get them to Text chat (iChat 2 did) But Video or Audio only will not work.
    Of soure that does not even look at the connection Speed needed for two video chats through the same modem.
    Nor do you say if you have been sussessful with either name to other Buddies first.
    3:55 PM Sunday; March 26, 2006

  • STMS - Transport Routes - Multiple Clients and Systems

    Hi Guys
    We are setting up a ERP Landscape based in four systems
    AED - Gold Development (Most Development starts from here)
    AEC - Customer Development (101,102,103...)
    AEQ - Customer QA (401,402,403,...)
    AEP - QA Production  (701,702,703,...)
    Our main goal is to release transports from AED 100 to all clients in AEC (101,102,103...)
    CTC was already set up to 1, and all system share a same Trans Dir
    For this purpose I have created a transport Group /SOD_DEV/ and added AEC 101, 102 and new clients would be added
    Only customizing request should be replicated on each client, and workbench only for one client.
    Then, I need also all the transports from AEC go their respective client transport queue in AEQ and AEP
    Example:
    AEC 101 --> AEQ 401 --> AEP 701
    AEC 102 --> AEQ 402 --> AEP 702
    And in the future it should be able to expand to
    AEC 103 --> AEQ 403 --> AEP 703 and go on.
    My questions are:
    Should I create a Transport Group for Customizing and Transport Layer for Workbench? O can I use a single Tranport Layer for both Workbench/Customizing?
    How can i create a route from AEC so transports who got imported in 101 are automatically delivered to 401 and then 701?
    Thanks
    Martin

    Hi Yuksel, thanks for your input.
    We agree with a tranport Group between AED and AEC. Transport layer is ZAED.
    All developments made in AED, are distributed to Transport Group /SOD/ to all AEC clients (100,101,102...)
    Now comes the tricky part
    for example, all requests that were imported in AEC 101 should be delivered to AEQ 401 and then delivered to AEP 701 only
    That why I didn't put a transport group between AEC and AEQ, since it should be a dependency.
    Any transport that was imported on AEC should follow their respective route
    Workbench: AEC 100 --> AEQ 400 --> AEP 700 (Sytem-Wide Workbench requests)
    Client 1: AEC 101 --> AEQ 401 --> AEP 701 (Client-Dependent Customizing)
    Client 2 :AEC 102 --> AEQ 402 --> AEP 702  (Client-Dependent Customizing)
    And it wiil follow with
    Client 3 AEC 103 --> AEQ 403 --> AEP 703 (Client-Dependent Customizing)
    It created these delivery routes; as example for Client1:  AED101-AEQ401 and AEQ401-AEP701. Is that correct?
    See attached the screenshot for better reference, you are welcome to further suggestions
    Best
    Martin

  • Installing multiple Instance and System Copy

    Hello All,
    In our customer landscape,we have a DEV Server and PRD server. Now the customer wants to install one more instance for Quality in the same DEV Server and then perform a system copy of PRD Server.(to make it 3 system landscape)
    How to perform this and what all the things to be considered before performing the same...?
    Kindly suggest.
    Thank You,
    Regards,
    Hasan

    It will install separate instance and same support pack level will come.
    You can see this video
    [System Copy and Migration]
    How to Perform a System Copy Export
    How to Perform a System Copy Import

  • IOS 8 - iCloud Keychain with Multiple Login Accounts for a Site

    I use iCloud Keychain to store multiple login accounts for a single website.
    When using Safari on a Mac, the last login account I used for that site is prepopulated in yellow fields. If I want to change the login account, I clear the field with the login ID and I see a dropdown of all of the login accounts available for that site.
    When using Safari on iOS 7, the last login account I used is prepopulated (just like with the Mac), but if I want to use a different login account, I need to enter enough characters in the login ID field for Safari to know which login account I want to use and then it autofills using that account.
    Now, with iOS 8, all I get is the last login account I used. I can't figure out how to autofill any of my other login accounts for that site.
    I'm pretty sure I'm doing something wrong, but I can't figure it out. Any suggestions would be appreciated.
    Thanks.
    Mike

    Mike:
    Did you ever find a solution for this? I just noticed the same behavior.
    -emde

  • Multiple logins from the same site not working with iCloud Keychain

    Hello all,
    I am trying to use the iCloud Keychain with my iPhone and iPad. I use a website that has two different logins, each with its own password. On Mavericks, I am able to select the correct username/password from my iCloud Keychain by pressing the "down" arrow in the username box.
    However, with my iOS devices, I am unable to access multiple logins. It merely Autofills the most recently used combination on whichever device most recently visited the site.
    Is there any way to get multiple login support working for an iOS device?
    Thank you!

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js

  • Two "system" keychains -- erased logins?

    On two occasions, I opened Safari and was prompted for an autofill password, and then again in Mail, I was prompted for an IMAP password that I easily have not had to enter for months.
    Upon opening up Keychain, I found that there were hardly any logins (this could be possible since I run this system on a hardwire), but there were two "system" keychains. I hadn't been prompted prior for a password upon opening Safari, and the fact that the login for my IMAP wasn't saving when entered (and checked to save in keychain) was a concern. Any help as to the cause behind these nuances would be much appreciated.

    it's still just one system keychain. you just opened it twice. this is quite harmless. if it really bothers you quit keychain access and delete the file /users/username/library/preferences/com.apple.security.plist. then start keychain access and there will be just one system keychain there.

  • How do I go about setting up my new wireless all-in-one Epson XP-215 printer to my MacBook Pro? The system is not automatically detecting the printer ad the furthest I get is "System" keychain user and pswd but I am a new user to Mac.

    I am a new user to Mac and trying to set up an Epson XP-215 All-in-One printer without any success. The Mac Book Pro is not recogising the Printer automatically and when following the instructions to add the printer, it gets as far as a display box for teh user and password for "System" Keychain but I am not sure what info to add there...
    The printer is meant to have a function calle dAir Print also that is meant to be used for Mac but I cannot figure out any of this! Why would the MacBook Pro not automatically pic up the printer? Please help...

    If you have not already done so, you should read the user manual that came w/the printer and/or contact Epson tech support. 
    Check out the following KB Articles: 
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    Also check out What to do when you can't print 

  • Best Practice in maintaining multiple apps and user logins

    Hi,
    My company is just starting to use APEX, and none of us (the developers) have worked on this before either. It is greatly appreciated if we can get some help here.
    We have developed quite a few applications in the same workspace. Now, we are going to setup UAT and PRD environments and also trying to understand what the best practice is to maintain multiple apps and user logins.
    Many of you have already worked on APEX environment for sometime, can you please provide some input?
    Should we create multiple apps(projects) for one department or should we create one app for one department?
    Currently we have created multiple apps for one department, but, we are not sure if a user can login once and be able to access to all the authenticated apps.
    Thank you,
    LC

    LC,
    I am not sure how much of this applies to your situation - but I will share what I have done.
    I built a single 700+ page application for my department - other areas create separate smaller applications.
    The approach I chose is flexible enough to accomdate both.
    I built a separate access control application(Control) in its own schema.
    We use database authenication fo this app - an oracle account is required.
    We prefer to use LDAP for authentication for the user applications.
    For users that LDAP is not option - an encrypted password is stored - reset via email.
    We use position based security - priviliges are based on job functions.
    We have applications, appilcations have roles , roles have access to components(tabs,buttons,unmasked card numbers,etc.)
    We have positions that are granted application roles - they inherit access to the role components.
    Users have a name, a login, a position, and a site.
    We have users on both the East Coast and the West Coast, we use the site in a sys_context
    and views to emulate VPD. We also use the role components,sys_contexts and views to mask/unmask
    card numbers without rewriting the dependent objects(querys,reports,views,etc.)
    The position based security has worked well, when someone moves,
    we change the position they are assigned to and they immediately have the privileges they need.
    If you are interested I can rpovide more detail.
    Bill

  • I NEED TO GET LOGIN AND LOGOUT TIMING DETAILS FROM CLIENT SYSTEMS

    HI,
    CAN ANYONE PLEASE HELP ME ON HOW TO GET LOGIN AND LOGOUT , CLIENT EVENT DETAILS FROM CLIENT SYSTEMS ON SERVER 2008 R2.
    THANKS,
    KUMAR.

    You may need to enable active directory Logon/Logoff Audit event.
    The Audit logon events policy records all attempts to log on to the local computer, whether by using a domain account or a local account.
    On Domain Controller, this policy records attempts to access the DC only.
    By using these events we can track user's logon duration by mapping logon and logoff events with user's Logon ID which is unique between user's logon and logoff.
    Please refer to this blog to understand the complete process to audit the successful or failed logon and logoff attempts in the network using the audit policies :
    http://www.lepide.com/blog/audit-successful-logon-logoff-and-failed-logons-in-activedirectory/
    Lepide - Simplifying IT Management

  • I have iMac osx  version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found.help

    have iMac osx  version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found please help !!

    You need to restart the iMac and hold down the Command and R keys immediately.
    You will then have the utilities drop down and you choose Terminal
    When Terminal opens, type exactly:
    resetpassword
    and press Return.
    When the Reset Password window opens, select the user for which you want to change the password.
    Enter the new password twice, and then click Save.
    Accept the next dialog window,
    And then Apply
    When finished click the apple at the left side of the menu bar, and the Restart.

  • Sync system and icloud keychains

    Hi,
    I had to reset the network settings on my iPhone 5 and then I noticed it had deleted all my wifi passwords from iCloud Keychain.
    Accessing the Keychain app on my Mac, I can see that all the passwords are still in my "system keychain", however, I cannot copy them to the "iCloud keychain".
    Is there any way to copy or sync the "Airport network passwords" from the system keychain into the iCloud keychain?
    Thanks

    Didn't it keep syncing with both iTunes and iCloud even after installing iTunes 11? (PC or Mac?)
    Ever since iCloud came out in 2011 I've had a configuration where I sync some calendars with iCloud and one with Outlook via iTunes. Until today I didn't even realize they had removed the option from iTunes after 10.7 because I think it kept working even after the upgrade. (I guess the new UI wouldn't let me select that option, but since I already had it configured, I think it kept working that way.)
    However, today I cycled my iCloud calendars off and then back on again to solve a different problem and then I was unable to turn on syncing with Outlook again. I stumbled across this article and it all came together: "iTunes 10.7 or earlier will allow you to enable iTunes sync for Calendars even if you are already using iCloud Calendar on your computer."
    Since I think it was working even under iTunes 11, I'm considering restoring from a backup from a couple of days ago to see if that will restore the configuration I had. But you're making me wonder if that will work.

  • While typing, the keyboard starts typing multiple letters. I'm fed up of this. I don't think I am doing something at my own, it's happening at its own. Is it because of some problem in the hardware since OS and system refresh could not resolve this.

    While i type, the keyboard starts typing multiple letters. I'm fed up of this. I think it's happening at its own. Is it because of some problem in the hardware since OS and system refresh could not resolve this please help.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If you have done this like I describe above and the problem continues I suggest you contact Apple Support or make an appointment at an Apple Store and have your iPad examined by a technician.

Maybe you are looking for