Multiple logon screen doesnt appear and session end in 30mins
Hi all,
I have a problem with my login session.
Multiple users use the same SAP USER ID to logon. but when i try to logon ( even when others are logged on d same id) i dont get the option for multiple logon screen to terminate/continue without ending the other logons but i get to logon directly without this screen as if i am the only user of this id.
but when others try to logon (when others are logged on the same id) they get the screen of multiple logon with options.
and my session termiates after every 30mins but their sessions continue without any termination. please note that no one termites the session by themselves.
I am not able to figure out what is happening. I changed my pc, my gui, updated to the latest patches, changed the lan ports but nothing changes. i continue to face the same problem. please provide d needful solution.
thanks.
Check these parameters
login/disable_multi_gui_login
Controls the deactivation of multiple dialog logons
Available as of SAP Basis 4.6
login/multi_login_users
List of excepted users, that is, the users that are permitted to log on to the system more than once.
Available as of SAP Basis 4.6
Find the full list of relevant parameters at:
http://help.sap.com/saphelp_nw04/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
Similar Messages
-
How to edit "license information for multiple logon" screen
hey gurus
i need to know how to edit or modify the 'license information for multiple logon" screen. this screen usually pops up when a user tries for a multiple logon to sap. We have activated the parameter 'login/disable_multi_gui_login' but we would like to modify the screen in such a way that only one radio button which says 'terminate this logon' should exist. we would prefer to remove the option of 'continue with this option and end any other logon'. Now i searched but i could not find anything to implement this so i am here and i need your advice and suggestions.
thanks in advance.
cheers.
natehey bernhard
many thanks for your reply..i appreciate your help. its just that its not explicitly mentioned we cant modify the screen in the note.
Is there any other note that specifically say so?
thanks for your time buddy.
regards -
How to suppress License Information for multiple logon screen?
Hi,
While LOGIN we will get "License Information for multiple logon screen" will displayed.
How to suppress that screen.
Regards,
Bala>
bala virupaksha wrote:
> Hi,
>
> While LOGIN we will get "License Information for multiple logon screen" will displayed.
> How to suppress that screen.
>
> Regards,
> Bala
and why would you want to do that?
does your contract with SAP say, that you may use multiple logins for free? would SAP's contract-issue department agree that -in your case- it's not necessary to record multiple logins?
have you read this part of the SAP license policy?
SAP gives express notice that the accessing of a system by more
than one person using one and the same named user constitutes
a breach.
tell me this does not apply to you ... -
How to recover photos from device that screen doesnt work, and didn't use cloud or a memory card. (chip)
I'm sorry to hear you no longer have access to your pictures ItzKB11. I know they're important, we'll do everything we can to help. However, since you did not back them up to any source and the screen does not work, we only have a couple options. Try using the USB cable to tranfer to PC:
From the Device to a Computer
• Launch Windows Explorer.
Using the computer keyboard, press Windows E ( E) keys.
Alternatively, right-click Start then click Explore.
• Using Windows Explorer, navigate to:
• SCH-I545 > Phone
• Utilize the computer to copy video/picture files from the following folders into the desired folder(s) on the computer's hard drive:
• DCIM
• Download
• Movies
• Pictures
• Disconnect the USB cable from the computer.
If you're unable to retrieve them that way, use this http://vz.to/1zyIQwo.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
OSX 10.8.2 Change expired Active Directory password at logon screen doesnt work
Hello
My system:
MacBook Pro 2012
OSX 10.8.2
I have a problem with changing e expired Active Directory password at the logon screen.
If i type in the old and the new passwort, it appears a message with following text:
"The password does not meet the requirements of the server"
Even if i type in a password like Tes0t!*2013, the message appears and i can not
change the password.
I have already disabled the "password must meet the password complexity requierements" policy in our default domain policy.
Does anyone know how to solve this problem?
Thanks.
DaniSafe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive. -
My ipod 5 touch screen doesnt work and shows vertical lines?
So, I was getting ready to go to my competition and my ipod 5th generation fell out of my pocket. It fell on the screen and when I looked it apeared to have no external damage.. I turned it on and it had vertical black, white, and even some blue lines on the screen. The touch screen since has not worked. The ipod apears to be fully functional, the time is changing and it conects to itunes. However I can not use my ipod because the touch screen doesn't work. My cousin is a tech nerd and he says that I internally broke the touch screen.
As for fixing it, I've been told a screen replacement will fix the problem. I have also heard that apple with not fix my screen but they will send me a new ipod and that is not what I want. Does anyone know where I can send it in to get fixed and for how much? Or where I can buy a screen replacement kit and how much that would be? And most importantly do you think replacing the screen will fix my problem?A third-party place like the following
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
iPod Touch Repair Digiexpress
http://www.digiexpress.us/iPod-Touch_c_86.htmlReplace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
I am online everyday. I turn on my computer and click on the Firefox icon. A web browser appears but not with my Yahoo! homepage. Instead of seeing my Yahoo! homepage I see a screen that says, "Well this is embarrassing." I read that the problem is due to a recently opened tab. It gives me the options of either restoring all previously used tabs from the last time of use or starting a new session. If I choose to restore previous tabs, I am further given the option to select which tabs I want restored and which ones I don't want to restore. I always choose to start a new session because all previous tabs consist of work that I have completed in the past (whether it be yesterday or the day before). I, therefore, have no interest in restoring a tab that contained an article about our current economic situation for example. As previously stated, I choose to start a new session every time I receive the "Well this is embarrassing" error message. When I choose this option, I am brought to a fresh tab with no information regarding work, articles, or entertainment from yesterday or some time in the past. I wish to have an explanation as to why this happens. I do not go on any malicious web sites or anything of the sort. This happens every single day. The automatic error message that appears is "Well this is embarrassing." For Firefox to say "Well this is embarrassing" is not close to the response it should give.
This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]] -
I have one computer with a logon for Kids and one for Adults. There is a touch and nano that was added to a single itunes account tied to my email on the adult logon and the shuffle that is on the kids account. I can't seem to get the multiple devices access to all the songs with out erase and re-sync error message when not using the right device on the assigned logon to the computer - why and can we change this?
It sounds like each Windows user has it's own iTunesLibrary.itl file. If that is the case, then you are correct, the correct device must be connected when logged in with the correct login.
If all Windows logins share an iTunesLibrary.itl file... then it does not matter which login is used or which device is connected. -
Since downloading Firefox 4, I will periodically get black and white horizontal lines that cover about 2/3 of the browser screen. There doesn't seem to be any trend to the website or areas it happens at, and will sometimes happen multiple times while scrolling through a large news article. The lines stay fixed to a certain area. The only way to get them to go away is to refresh the screen or if the page is big enough scroll to an area not affected and then scroll back. I've heard from someone that it might be my graphics card. My computer's a hand-me-down but not terribly old so it could be that the card is just old or bad, any other ideas?
Picture: http://s294.photobucket.com/albums/mm116/Alterationnn/?action=view¤t=firefox.jpgTry to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver. -
While working on my design the blue screen suddenly appears and cant turn on anymore
Pls help, as i do my design job my imac suddenly appears a bluescreen. I tried to restart but cannot move on anymore and stay on apple logo gray screen. Pls help
Restart into safe mode, holding down the SHIFT key. If that works, peruse http://support.apple.com/kb/PH4190
-
Hi my iphone screen doesnt work and it apears all blue and lines in white
Well the problem is suppoused to be the screen, because my macbook recognize the divice and its conected to the itunes, bue the screen is all in blue and withe.
I bought the iphone 4s last year in USA at the store located in the Grand Central Terminal in New York, it has no more warranty because i checked it online, and also i dont have the bill.
I am from Argentina, and i could possible go to united states in december o january, so i wanted to know if the apple store could take the divice if it is impossible to fix, at certain price so that i can bought a new one 5 or 5s, or the device is just trash from now?
Thanks, and sorry for my bad english.Apple doesn't fix phones, they replace them. Out of warranty replacement for the iPhone 4S is $199. When you get to the US, you can request this replacement.
-
This seemed to happen very suddenly; I left my iMac running while i went out and came in to find that the screen was totally unusable, as you will be able to see from the picture it has a lot of lines that seem to come and go a random and sometimes it goes black all together. What do you think is wrong with it? Logic board? Graphics card? Screen itself?.. also if it is the graphics card, is it separate to the logic board or do both need to be replaced?
Also some additional info:
iMac Early 2008
2.4ghz
4gb Ram
OSX 10.9.2
ATI Radion HD 2400
Actual computer working on external monitor, just not internal
ThanksCosts vary by area, I think you may find out though that spending money on a 6+ year computer may not be worth it, you can buy an Apple Refurbished Mac with much more up-to-date specifications and save hundreds of $s. If this is of interest you can only find them on Apple's on-line store, in the US the current link is:
http://store.apple.com/us/browse/home/specialdeals
Then click the link to the iMacs. If you don't find one you want, continue looking the inventories change frequently, sometimes by the hour. -
I would appreciate any help anyone can provide. I need to know how to get what I wish to watch on the TV, such as Netflix, and not just the desktop screen. Thank you
You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor. -
Display going off on linux terminals and session ends when kept ideal
Hi,
When I have logged onto linux server using tarantella.If the terminal is inactive for some time it is terminating my session automatically and i have all of my terminals as blank. I do not get any display in terminals opened. Could you please help me with this.
The following error message i am getting:
"Connection to Secure Global Desktop server has been terminated"
Thank you
SudhirWhat I found out is, when a proxy Service is between client and SGD I had to reduce the keep alives to 30s.
tarantella config edit --sessions-aipkeepalive 30
/opt/tarantella/var/docroot/resources/login/sco/tta/boot # grep AsadKeepAlive *
autostrap.html: <param name=\"AsadKeepAlive\" value=\"30\">
strap.html: <param name=\"AsadKeepAlive\" value=\"30\"> -
i woke u this morning and my phone is blank its working but the screen isnt showing anything i need to do a backup before i take it into a store but because there is a passcode on the phone itunes need me to enter that onto the phone before i can carry out the backup?
Try resetting your phone: Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.
If that doesn't work, sorry, you're out of options.
Maybe you are looking for
-
Can you transfer music from an iPhone to iTunes?
i was just wondering if there is a way to get my music from my iPhone onto my iTunes on my Mac. my dell had a bad virus, so i gave it to a relative of mine to reinstall everything, and i told him to backup my itunes(which he forgot to do). so now i h
-
Is there a way to avoid a iPlanet Messaging Express home user to copy and paste email body content and avoid attachment deliver attempts?Cause this could grant home users to take ownership of enterprise's documents, sending to them selves and after t
-
The problems occurred after photoshop elements said I did not have the necessary permissions to save changes to a photo. I then allowed all to permissions to all disks, I have three external hard drives but I cannot restore from any as they all appea
-
I am trying to update an ipod version 2.2 with itunes but I keep getting an error (-1). Is this an hardware issue according to Apple and if so is there any way to fix this.?
-
Scatter Plot Problem!!
Hello everyone, I am quite new at Labview and I have a question regarding plotting 2d-array in a scatter plot. I would like to plot my data as a scatter plot, which I have done with the Waveform graph, and now I would like to find out the area with t