Multiple logon setting

Hello Guru's,
Is there a setting in the Portal to stipulate the number of open sessions any given user can have. I.E. a user should only be able to log in the Portal from one machine with that user id.
I saw some threads on this concluding that there needs to be some custom JAAS module developed...that's hard to believe it is the only option. I realize the HTTP conneciton is stateless as well but there must be some simple setting to say that if the connection is made don't allow another one.
Many thanks in advance!
Regards,
Patrick

The answer is no. If you need different bleeds on different pages (which can have different sizes) you have to set up different documents.
You can put together several independent files in one single InDesign INDB book file. This is the only solution to get different bleed sizes on different pages.

Similar Messages

Multiple Logon disable

Dear All ,
while multiple logon are performed.SAP pop-up a message with 3 options
1.terminate logon
2.continue with the logon
3.continue with the logon terminating other sessions.
Here we Want to disable the 2 option that is : continue with the logon.
Here we came to know : we can add the following parameterto the instance profile
logon/disable_multi_gui_login
Pl guide with the steps how to add this & where ( Tcode & procedure ) .
Regards

Hi,
Please go through the below SAPnote to get better clarity on it.....
Note 142724 - Prevention of multiple SAPGUI logons
PS: If this parameter is set to value 1, multiple SAPGUI logons (in the same client and with the same user) are blocked by the system. The parameter is effective during the SAPGUI logon. Logons to the system using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not influenced by the profile parameter. Furthermore, SAPGUI transaction calls (iViews) that are placed through the Workplace or the Enterprise Portal are not controlled with regard to multiple logons...
Regards,
PY

Disable the multiple Logons in ECC6 and allowing few users

Dear All,
I need to disable the multiple Logons in ECC6 and allowing few users, can multilogin in system.
I have seen that the parameter login/disable_multi_gui_login and login/multi_login_users can be set.
But need to know did any once use in Ecc6 system and what values to be given in login/multi_login_users.
Please suggest .
Regards,
Kumar

I have found an exmaple on the web of using javascript (it opens a child window that polls the parent window, and invalidates the session if the parent window is closed). I agree there always appears to be loop holes around most of th e solutions i've come across.
I had the same idea about invalidating any previously known session for the same userid, I'm pretty new to the java/web app world so I'm struggling with finding the information I need. I couldn't find any methods to call to invalidate another session, I only came accross example where the current session invalidated its own session via call to the session object, do you have any idea how I would do that for other sessions.
Mant thanks for your input.
Derek.

Cannot disable multiple logon

Dear all,
I want to disable multiple logon in my system, I have add parameter: login/disable_multi_gui_login value as 1. But it can't disable multiple logon after restart sap. Could you advice?
Rdgs,
Emily

Hello Emily
1. Try setting the parameter in default profile (DEFAULT.PFL).
2. The parameter restricts multiple logon throguh sap gui only. I hope you are testing multiple logons through sap gui.
Cheers,
Tapan

I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?

I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?

I'd suggest you consider a cloud-based file sharing service such as Dropbox for this sort of use. iOS is not designed to be synched with more than one iTunes library at a time, so attempting to use it as you describe, connecting a single iPad to multiple computers, almost certainly won't work as you intend and is likely to cause nothing but headaches.
Regads.

How Data Integrator supports multiple character sets in a single ETL transaction

When using Data Integrator (DI) to process a mix of multi-byte and single-byte data, it is recommended that you use UTF-8 for the job server codepage. You can, however, use different codepages for the individual datastores.Imagine this situation : Great Big Company Inc. wants to create a global customer database. To do this, Great Big Company Inc. must read from a database of US customers, and a database of Korean customers. Great Big Company Inc. then wants to load both sets of customers into a single database.Can DI manage these requirements? Of course. The codepage is the thing.

I've never seen this used the way you are using it. In my experience the only way to do this would be to execute a single SQL statement that returns multiple result sets - you are trying to append two SQL statements.
You could define an in-line procedure wrapping your two select statements, or you could define a stored procedure to do the same thing. Then (either way) use CallableStatement to execute the call to the procedure.

How to multiple/ parellal sets of books to generate more than one financial statement based on different (or the same) accounting principles.

How to multiple/ parallel sets of books to generate more than one financial statement based on different (or the same) accounting principles.
My Client needs Parallel Ledger in SAP B1 similar like SAP ECC. Is this functionality available ?

Dear Mr. Nagrajan,
Thank you for your response. I have already gone through documents but not able to understand. Is there any setup for this ? or its just work around i.e. using template and special field in JV i.e. Ref. 1 /2
My doubts :
I understand that Chart of Account structure is one and common for IFRS and other accounting method. We need to create only those account separately ( 2 times with prefix like IFRS revenue account, GAAP Revenue account).
Now at time of entry, Assume some entries / adjustment are specifically for IFRS and not for other ledger. In this case, What need to do ?
You have mentioned about DTW approach but do we need to insert all JV's again with other ledger ?
Someone suggested that if any entry which are specific to IFRS Ledger, We need to user Ref.1 /2 column or Transcation code column and in which we can put IFRS
Based on this, Need to create 2 seperate template for IFRS and other ledger for all report.
This is my understanding of Solution in SAP B1. Please help me to clarify my though process
Please do needful.If you have done implemenation and if you can share doucment, it would be great help.
Email :[email protected]

Matching across multiple character sets

Would like to know whether anyone has attempted matching across multiple character sets, for example, between English and Japanese: what are the pitfalls to avoid, what are the best practices, and what you would like to see from application/tools perspective as an ideal solution. thanks

If you upgrade to Logic Pro, you'll get WaveBurner as part of the package which helps you do this, including tweaking your pauses between tracks, fades etc.
If you have Toast, you can do it there too.
If you don't have any 3rd. party software, the work around would be to assemble all your songs in order, end to end in a new Logic file, and listen to all your tracks and adjust the relative levels between songs, then bounce out the individual tracks which have volume changes with their new volume settings. Finally you could then use any burning app such as [SimplyBurns|http://bit.ly/c1oglP] to create CDs or bounce them out in Logic with the additional .mp3 option.
Obviously it's important to listen to your material in order, in context, as some songs will be at the wrong subjective level depending on the tracks either side in the placement. This isn't really important in digital distribution where your material probably won't be listened to as a whole, but as individual downloads.

Multiple Logon in Production

All,
I am trying to understand the actual risk of allowing users multiple logon in production systems. As of now I believe that should logon credentials be stolen then it's not possible to monitor illegal logons and also a possible data inconsistency.
Please throw some light, have tried searching with the logon profile parameters in the forum and online, but nothing concrete found.
Kind Regards,
AJS

Hi Avinash,
Production system should not allow multiple logon.
Please have a look at below for restrict multiple logins :-
[Restrict multiple logins for a single user in Portal |/message/6942923#6942923 [original link is broken];
[Limiting Number of Users Logged On |http://wiki.sdn.sap.com/wiki/display/EP/LimitingNumberofUsersLogged+On]
Hope it helps
Regards

SAPGui for Windows Multiple Logon with Portal

Hi,
We are using SAPGUI for Windows in Portal in the external window, we are also using it the SAPConsole form the desktop. While using from desktop, the multiple logon (within same client) complains / comes with the pop-up with two standard options.
We would like achieve the same functionality of popup (Restricting multiple logons for the same client) within the portal, any ideas?
I came across certain threads and also notes but none seem to provide a solution....
[Restrict multi logon to R/3 system from portal using single sign on. |Restrict multi logon to R/3 system from portal using sigle sign on.;
[SAP GUI 7.10 and SSO - multiple logons issue. How to restrict it? |/thread/1623980 [original link is broken];
Note 142724 - Prevention of multiple SAPGUI logons
Thank you in advance.
Best regards,
Dharmi
Edited by: Dharmi Tanna on Jun 25, 2010 2:09 PM

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

Remote Desktop Gateway and WebAccess Deployment - Multiple Logon Prompts

I'm having a few issues with some multiple logon prompts using "Connect to a remote PC" via RD Web Access.
I am able to log onto the RDWeb without a problem.
Essentially once I make a connection to my end-device I first receive a logon prompt, I'm authenticated, then I'm asked again for another logon prompt. Any ideas how to resolve this?
My layout is simple:
1 VM in the DMZ that has the Remote Desktop Gateway and Remote Desktop Web Access roles installed. No connection broker, or session host.
With my deployment I have a wildcard certificate bound to the Remote Desktop Gateway and it is bound properly in IIS. Remote Desktop functionality through the RDGateway works just fine. However, the only nuisance is that I get prompted multiple times for
credentials when accessing the end-device regardless if my connection is from a domain-joined machine or a non-domain joined machine.
I've tried using Web Single Sign On via http://anandthearchitect.com/2014/01/20/rds-2012-r2single-sign-on-using-windows-authentication-for-rdweb-page/ and it still does not work.
Any ideas?
Thanks,
Dan

Hi Dan,
How many prompts are you seeing? Expected behavior for Connect to a remote PC would be this:
1. Log on to RDWeb
2. Select Connect to a remote PC tab
3. Enter server name in Connect to box, click Connect
4. Unknown publisher warning, click Connect
5. Credentials prompt, it should say These credentials will be used to connect to the following computers: 1. rdgw.domain.com (RD Gateway server) 2. remote.domain.com (remote computer)
6. After entering credentials and clicking OK it should log you in to the remote computer. This assumes that the destination is authenticated properly (usually via certificate) and the credentials are valid for both the RDG and the remote
computer. Normally in a domain environment the same credentials (domain\username) would be valid for the RDG and the remote server.
-TP

Multiple characater set data

I have data in multiple character sets, eg. ASCII, IBM850, Windows1252, UTF8 etc. I want to insert them into the database. How do I specify the character set of the data at bind time in ODBC.
If this is not possible, what is an alternative?

thanks matt; despite a questionable layout for this setup i think that you'll end up with problems exporting those values to xml as you can't join them in a say, people subset, as each person is basically a standalone value.
in any case i can argue that this is a real deal breaker for a bunch of organizations given that you would expect a simple multiple choice field based on existing lookup values with an optional possibility to populate the set with new values for the end user (based on your permission) -- or alternatively a text input with auto suggestion based on lookup values that allows you to add/remove multiple records via [+/-] which again end up in one single field.

One attribute assigned to Multiple Attribute Sets

Hello There,
I have created general attributes like Firs_Name (Character - 40), Last_Name (Character - 40) & Age (Numeric - 3) and assigned them to Multiple Attribute sets like Family_Info1, Family_Info2 & Family_Info3.
Then i have assigned the above mentioned 3 Attribute sets to a BP.
The problem is, when i maintain the info in Family_Info1 for First_Name, Last_Name & Age, system is updating the Family_Info2 & Family_Info 3 with the sames values and if i maintain the Family_Info2 with a different Value, the Family_Info1 is overwritten with Values from Family_Info2.
Pls advise, if this is the standard SAP behavior and i should create different Attributes for different Attribute Sets (Like First_Name1 for Family_Info1 & First_Name2 for Family_Info2 etc) OR, it could be a SAP Bug or i need to do some config to fix this issue.
Thanks and Regards.

This is the standard behaviour and you can create different attributes and assign them to these different attribute sets to avoid this.
Prakash

Stored Procedure With Multiple Result Sets As Report Source : Crosspost

Hello Everyone,
I have an issue where i have created a stored procedure that returns multiple result sets
/* Input param = @SalesOrderID */
SELECT * FROM Orders TB1
INNER JOIN OrderDetails TB2 ON TB1.ID = TB2.ID
WHERE TB1.OrderID = @SalesOrderID
SELECT * FROM Addresses
WHERE Addresses.OrderID = @SalesOrderID AND Addresses.AddressType = 'Shipping'
SELECT * FROM Addresses
WHERE Addresses.OrderID = @SalesOrderID AND Addresses.AddressType = 'Billing'
This is just a quick sample, the actual procedure is a lot more complex but this illustrates the theory.
When I set the report source in Crystal X to the stored procedure it is only allowing me to add rows from the first result set.
Is there any way to get around this issue?
The reason that I would prefer to use a stored procedure to get all the data is simply performance. Without using one big stored procedure I would have to run at least 6 sub reports which is not acceptable because the number of sub reports could grow exponentially depending on the number of items for a particular sales order.
Any ideas or input would be greatly appreciated.
TIA
- Adam
P.S
Sorry for the cross post, I originally posted this question [here|/community [original link is broken];
but was informed that it might be the wrong forum
Edited by: Adam Harris on Jul 30, 2008 9:44 PM

Adam, apologies for the redirect, but it is better to have .NET posts in one place. That way anyone can search the forum for answers. (and I do not have the rights to move posts).
Anyhow, as long as the report is created, you should be able to pass the datasets as:
crReportDocument.Database.Tables(0).SetDataSource(dataSet.Tables("NAME_OF_TABLE"))
Of course alternatively, (not sure if this is possible in your environment) you could create a multi-table ADO .NET dataset and pass that to the report.
Ludek

CC / RAR 5.2 - Multiple Rule Set Question

How does the system handle the use of multiple rule sets in CC / RAR 5.2?
For example, letu2019s say I want to keep a standard SAP rule set in tact to use for testing and comparison in RAR, but I also want to load another one.
I realize that only 1 can be the u201CDEFAULTu201D so what does that mean? I know that a risk analysis is only run against the rule set you set as default. I also know that you can select the rule set to use in processing when you manually run either through Informer or Configuration tab a risk analysis. What I am really concerned with is what happens if you take the results to u201Cmanagement reportsu201D from 2 different rule sets?
First, can you even do it?
Second, if you can, then I think you must have to come up with a different RISKID configuration schema for each rule set otherwise, I do not see how you can differentiate from which rule set the violation is generated. That said, you will also need to export the report information into Excel and make any u201Crule set sortu201D there as I donu2019t see a way to do it directly in RARu2026.maybe a future improvement?
Can anyone confirm the impact of multiple rule sets and how you manage them?
Regards,
Greg

Greg,
You can maintain the different severity levels for different Rule Sets. For example, in one Rule Set you can keep the "Critical" Risks and in other you can keep "High", "Medium" & "Low". Run your analysis against first Rule Set if you want to know the "Critical" Risks and second Rule set you can use for rest of the severity levels. I hope this way you can manage your multiple Rule Sets in RAR.
Thanks,
Tavi
SAP Security & GRC Consultant.

Multiple logon setting

Similar Messages

Maybe you are looking for